diff options
| -rw-r--r-- | drivers/usb/serial/Kconfig | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index f9c6c0922c0..2cffec85ee7 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -44,13 +44,11 @@ config USB_SERIAL_CONSOLE config USB_EZUSB bool "Functions for loading firmware on EZUSB chips" - depends on USB_SERIAL help Say Y here if you need EZUSB device support. config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use the generic USB serial driver. Please read <file:Documentation/usb/usb-serial.txt> for more information on @@ -60,7 +58,6 @@ config USB_SERIAL_GENERIC config USB_SERIAL_AIRCABLE tristate "USB AIRcable Bluetooth Dongle Driver" - depends on USB_SERIAL help Say Y here if you want to use USB AIRcable Bluetooth Dongle. @@ -69,7 +66,6 @@ config USB_SERIAL_AIRCABLE config USB_SERIAL_AIRPRIME tristate "USB AirPrime CDMA Wireless Driver" - depends on USB_SERIAL help Say Y here if you want to use a AirPrime CDMA Wireless PC card. @@ -78,7 +74,6 @@ config USB_SERIAL_AIRPRIME config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use a ARK Micro 3116 USB to Serial device. @@ -88,7 +83,6 @@ config USB_SERIAL_ARK3116 config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use a Belkin USB Serial single port adaptor (F5U103 is one of the model numbers) or the Peracom single @@ -99,7 +93,6 @@ config USB_SERIAL_BELKIN config USB_SERIAL_CH341 tristate "USB Winchiphead CH341 Single Port Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use a Winchiphead CH341 single port USB to serial adapter. @@ -109,7 +102,6 @@ config USB_SERIAL_CH341 config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" - depends on USB_SERIAL select USB_EZUSB help Say Y here if you want to use a ConnectTech WhiteHEAT 4 port @@ -120,7 +112,6 @@ config USB_SERIAL_WHITEHEAT config USB_SERIAL_DIGI_ACCELEPORT tristate "USB Digi International AccelePort USB Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 2 port (plus parallel port) and 4 port USB serial converters. The @@ -135,7 +126,6 @@ config USB_SERIAL_DIGI_ACCELEPORT config USB_SERIAL_CP2101 tristate "USB CP2101 UART Bridge Controller" - depends on USB_SERIAL help Say Y here if you want to use a CP2101/CP2102 based USB to RS232 converter. @@ -145,7 +135,6 @@ config USB_SERIAL_CP2101 config USB_SERIAL_CYPRESS_M8 tristate "USB Cypress M8 USB Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use a device that contains the Cypress USB to Serial microcontroller, such as the DeLorme Earthmate GPS. @@ -160,7 +149,6 @@ config USB_SERIAL_CYPRESS_M8 config USB_SERIAL_EMPEG tristate "USB Empeg empeg-car Mark I/II Driver" - depends on USB_SERIAL help Say Y here if you want to connect to your Empeg empeg-car Mark I/II mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} @@ -172,7 +160,6 @@ config USB_SERIAL_EMPEG config USB_SERIAL_FTDI_SIO tristate "USB FTDI Single Port Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use a FTDI SIO single port USB to serial converter device. The implementation I have is called the USC-1000. @@ -186,7 +173,6 @@ config USB_SERIAL_FTDI_SIO config USB_SERIAL_FUNSOFT tristate "USB Fundamental Software Dongle Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use the Fundamental Software dongle. @@ -195,7 +181,6 @@ config USB_SERIAL_FUNSOFT config USB_SERIAL_VISOR tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" - depends on USB_SERIAL help Say Y here if you want to connect to your HandSpring Visor, Palm m500 or m505 through its USB docking station. See @@ -207,7 +192,6 @@ config USB_SERIAL_VISOR config USB_SERIAL_IPAQ tristate "USB PocketPC PDA Driver" - depends on USB_SERIAL help Say Y here if you want to connect to your Compaq iPAQ, HP Jornada or any other PDA running Windows CE 3.0 or PocketPC 2002 @@ -219,7 +203,6 @@ config USB_SERIAL_IPAQ config USB_SERIAL_IR tristate "USB IR Dongle Serial Driver" - depends on USB_SERIAL help Say Y here if you want to enable simple serial support for USB IrDA devices. This is useful if you do not want to use the full IrDA @@ -230,7 +213,6 @@ config USB_SERIAL_IR config USB_SERIAL_EDGEPORT tristate "USB Inside Out Edgeport Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use any of the following devices from Inside Out Networks (Digi): @@ -256,7 +238,6 @@ config USB_SERIAL_EDGEPORT config USB_SERIAL_EDGEPORT_TI tristate "USB Inside Out Edgeport Serial Driver (TI devices)" - depends on USB_SERIAL help Say Y here if you want to use any of the devices from Inside Out Networks (Digi) that are not supported by the io_edgeport driver. @@ -267,7 +248,6 @@ config USB_SERIAL_EDGEPORT_TI config USB_SERIAL_GARMIN tristate "USB Garmin GPS driver" - depends on USB_SERIAL help Say Y here if you want to connect to your Garmin GPS. Should work with most Garmin GPS devices which have a native USB port. @@ -280,7 +260,6 @@ config USB_SERIAL_GARMIN config USB_SERIAL_IPW tristate "USB IPWireless (3G UMTS TDD) Driver" - depends on USB_SERIAL help Say Y here if you want to use a IPWireless USB modem such as the ones supplied by Axity3G/Sentech South Africa. @@ -290,7 +269,6 @@ config USB_SERIAL_IPW config USB_SERIAL_IUU tristate "USB Infinity USB Unlimited Phoenix Driver" - depends on USB_SERIAL help Say Y here if you want to use a IUU in phoenix mode and get an extra ttyUSBx device. More information available on @@ -301,7 +279,6 @@ config USB_SERIAL_IUU config USB_SERIAL_KEYSPAN_PDA tristate "USB Keyspan PDA Single Port Serial Driver" - depends on USB_SERIAL select USB_EZUSB help Say Y here if you want to use a Keyspan PDA single port USB to @@ -313,7 +290,6 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" - depends on USB_SERIAL select USB_EZUSB ---help--- Say Y here if you want to use Keyspan USB to serial converter @@ -406,7 +382,6 @@ config USB_SERIAL_KEYSPAN_USA49WLC config USB_SERIAL_KLSI tristate "USB KL5KUSB105 (Palmconnect) Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use a KL5KUSB105 - based single port serial adapter. The most widely known -- and currently the only @@ -422,7 +397,6 @@ config USB_SERIAL_KLSI config USB_SERIAL_KOBIL_SCT tristate "USB KOBIL chipcard reader" - depends on USB_SERIAL ---help--- Say Y here if you want to use one of the following KOBIL USB chipcard readers: @@ -440,7 +414,6 @@ config USB_SERIAL_KOBIL_SCT config USB_SERIAL_MCT_U232 tristate "USB MCT Single Port Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use a USB Serial single port adapter from Magic Control Technology Corp. (U232 is one of the model numbers). @@ -453,7 +426,6 @@ config USB_SERIAL_MCT_U232 config USB_SERIAL_MOS7720 tristate "USB Moschip 7720 Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use USB Serial single and double port adapters from Moschip Semiconductor Tech. @@ -463,7 +435,6 @@ config USB_SERIAL_MOS7720 config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" - depends on USB_SERIAL ---help--- Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 Dual-Serial port device from MosChip Semiconductor. @@ -478,14 +449,12 @@ config USB_SERIAL_MOS7840 config USB_SERIAL_NAVMAN tristate "USB Navman GPS device" - depends on USB_SERIAL help To compile this driver as a module, choose M here: the module will be called navman. config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use the PL2303 USB Serial single port adapter from Prolific. @@ -495,7 +464,6 @@ config USB_SERIAL_PL2303 config USB_SERIAL_OTI6858 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" - depends on USB_SERIAL help Say Y here if you want to use the OTi-6858 single port USB to serial converter device. @@ -505,7 +473,6 @@ config USB_SERIAL_OTI6858 config USB_SERIAL_SPCP8X5 tristate "USB SPCP8x5 USB To Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use the spcp8x5 converter chip. This is commonly found in some Z-Wave USB devices. @@ -515,7 +482,6 @@ config USB_SERIAL_SPCP8X5 config USB_SERIAL_HP4X tristate "USB HP4x Calculators support" - depends on USB_SERIAL help Say Y here if you want to use an Hewlett-Packard 4x Calculator. @@ -524,7 +490,6 @@ config USB_SERIAL_HP4X config USB_SERIAL_SAFE tristate "USB Safe Serial (Encapsulated) Driver" - depends on USB_SERIAL config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" @@ -532,7 +497,6 @@ config USB_SERIAL_SAFE_PADDED config USB_SERIAL_SIERRAWIRELESS tristate "USB Sierra Wireless Driver" - depends on USB_SERIAL help Say M here if you want to use a Sierra Wireless device (if using an PC 5220 or AC580 please use the Airprime driver @@ -543,7 +507,6 @@ config USB_SERIAL_SIERRAWIRELESS config USB_SERIAL_TI tristate "USB TI 3410/5052 Serial Driver" - depends on USB_SERIAL help Say Y here if you want to use the TI USB 3410 or 5052 serial devices. @@ -553,7 +516,6 @@ config USB_SERIAL_TI config USB_SERIAL_CYBERJACK tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" - depends on USB_SERIAL ---help--- Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard reader. This is an interface to ISO 7816 compatible contact-based @@ -566,7 +528,6 @@ config USB_SERIAL_CYBERJACK config USB_SERIAL_XIRCOM tristate "USB Xircom / Entregra Single Port Serial Driver" - depends on USB_SERIAL select USB_EZUSB help Say Y here if you want to use a Xircom or Entregra single port USB to @@ -578,7 +539,6 @@ config USB_SERIAL_XIRCOM config USB_SERIAL_OPTION tristate "USB driver for GSM and CDMA modems" - depends on USB_SERIAL help Say Y here if you have a GSM or CDMA modem that's connected to USB. @@ -597,7 +557,6 @@ config USB_SERIAL_OPTION config USB_SERIAL_OMNINET tristate "USB ZyXEL omni.net LCD Plus Driver" - depends on USB_SERIAL help Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. @@ -606,7 +565,6 @@ config USB_SERIAL_OMNINET config USB_SERIAL_DEBUG tristate "USB Debugging Device" - depends on USB_SERIAL help Say Y here if you have a USB debugging device used to receive debugging data from another machine. The most common of these |