diff options
-rw-r--r-- | drivers/gpu/drm/Kconfig | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/Kconfig | 12 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/Makefile | 6 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_connector.c | 141 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_drv.c | 99 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_drv.h | 141 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_encoder.c | 80 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_fb.c | 611 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_gem.c | 227 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_main.c | 338 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_modeset.c | 414 | ||||
-rw-r--r-- | drivers/gpu/drm/udl/udl_transfer.c | 253 |
13 files changed, 2324 insertions, 0 deletions
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 2418429a983..ed2f6901b1e 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -165,3 +165,4 @@ source "drivers/gpu/drm/vmwgfx/Kconfig" source "drivers/gpu/drm/gma500/Kconfig" +source "drivers/gpu/drm/udl/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 0cde1b80fdb..7f2029726db 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -37,4 +37,5 @@ obj-$(CONFIG_DRM_VIA) +=via/ obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/ obj-$(CONFIG_DRM_EXYNOS) +=exynos/ obj-$(CONFIG_DRM_GMA500) += gma500/ +obj-$(CONFIG_DRM_UDL) += udl/ obj-y += i2c/ diff --git a/drivers/gpu/drm/udl/Kconfig b/drivers/gpu/drm/udl/Kconfig new file mode 100644 index 00000000000..f96799d1b40 --- /dev/null +++ b/drivers/gpu/drm/udl/Kconfig @@ -0,0 +1,12 @@ +config DRM_UDL + tristate "DisplayLink" + depends on DRM && EXPERIMENTAL + select USB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO + select DRM_KMS_HELPER + help + This is a KMS driver for the USB displaylink video adapters. + Say M/Y to add support for these devices via drm/kms interfaces. diff --git a/drivers/gpu/drm/udl/Makefile b/drivers/gpu/drm/udl/Makefile new file mode 100644 index 00000000000..05c7481bfd4 --- /dev/null +++ b/drivers/gpu/drm/udl/Makefile @@ -0,0 +1,6 @@ + +ccflags-y := -Iinclude/drm + +udl-y := udl_drv.o udl_modeset.o udl_connector.o udl_encoder.o udl_main.o udl_fb.o udl_transfer.o udl_gem.o + +obj-$(CONFIG_DRM_UDL) := udl.o diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c new file mode 100644 index 00000000000..ba055e9ca00 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_connector.c @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2012 Red Hat + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include "drmP.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "drm_crtc_helper.h" +#include "udl_drv.h" + +/* dummy connector to just get EDID, + all UDL appear to have a DVI-D */ + +static u8 *udl_get_edid(struct udl_device *udl) +{ + u8 *block; + char rbuf[3]; + int ret, i; + + block = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (block == NULL) + return NULL; + + for (i = 0; i < EDID_LENGTH; i++) { + ret = usb_control_msg(udl->ddev->usbdev, + usb_rcvctrlpipe(udl->ddev->usbdev, 0), (0x02), + (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2, + HZ); + if (ret < 1) { + DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret); + i--; + goto error; + } + block[i] = rbuf[1]; + } + + return block; + +error: + kfree(block); + return NULL; +} + +static int udl_get_modes(struct drm_connector *connector) +{ + struct udl_device *udl = connector->dev->dev_private; + struct edid *edid; + int ret; + + edid = (struct edid *)udl_get_edid(udl); + + connector->display_info.raw_edid = (char *)edid; + + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + connector->display_info.raw_edid = NULL; + kfree(edid); + return ret; +} + +static int udl_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + return 0; +} + +static enum drm_connector_status +udl_detect(struct drm_connector *connector, bool force) +{ + if (drm_device_is_unplugged(connector->dev)) + return connector_status_disconnected; + return connector_status_connected; +} + +struct drm_encoder *udl_best_single_encoder(struct drm_connector *connector) +{ + int enc_id = connector->encoder_ids[0]; + struct drm_mode_object *obj; + struct drm_encoder *encoder; + + obj = drm_mode_object_find(connector->dev, enc_id, DRM_MODE_OBJECT_ENCODER); + if (!obj) + return NULL; + encoder = obj_to_encoder(obj); + return encoder; +} + +int udl_connector_set_property(struct drm_connector *connector, struct drm_property *property, + uint64_t val) +{ + return 0; +} + +static void udl_connector_destroy(struct drm_connector *connector) +{ + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +struct drm_connector_helper_funcs udl_connector_helper_funcs = { + .get_modes = udl_get_modes, + .mode_valid = udl_mode_valid, + .best_encoder = udl_best_single_encoder, +}; + +struct drm_connector_funcs udl_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = udl_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = udl_connector_destroy, + .set_property = udl_connector_set_property, +}; + +int udl_connector_init(struct drm_device *dev, struct drm_encoder *encoder) +{ + struct drm_connector *connector; + + connector = kzalloc(sizeof(struct drm_connector), GFP_KERNEL); + if (!connector) + return -ENOMEM; + + drm_connector_init(dev, connector, &udl_connector_funcs, DRM_MODE_CONNECTOR_DVII); + drm_connector_helper_add(connector, &udl_connector_helper_funcs); + + drm_sysfs_connector_add(connector); + drm_mode_connector_attach_encoder(connector, encoder); + + drm_connector_attach_property(connector, + dev->mode_config.dirty_info_property, + 1); + return 0; +} diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c new file mode 100644 index 00000000000..5340c5f3987 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_drv.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2012 Red Hat + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include "drm_usb.h" +#include "drm_crtc_helper.h" +#include "udl_drv.h" + +static struct drm_driver driver; + +static struct usb_device_id id_table[] = { + {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,}, + {}, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +MODULE_LICENSE("GPL"); + +static int udl_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + return drm_get_usb_dev(interface, id, &driver); +} + +static void udl_usb_disconnect(struct usb_interface *interface) +{ + struct drm_device *dev = usb_get_intfdata(interface); + + drm_kms_helper_poll_disable(dev); + drm_connector_unplug_all(dev); + udl_fbdev_unplug(dev); + udl_drop_usb(dev); + drm_unplug_dev(dev); +} + +static struct vm_operations_struct udl_gem_vm_ops = { + .fault = udl_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static const struct file_operations udl_driver_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .mmap = drm_gem_mmap, + .poll = drm_poll, + .read = drm_read, + .unlocked_ioctl = drm_ioctl, + .release = drm_release, + .fasync = drm_fasync, + .llseek = noop_llseek, +}; + +static struct drm_driver driver = { + .driver_features = DRIVER_MODESET | DRIVER_GEM, + .load = udl_driver_load, + .unload = udl_driver_unload, + + /* gem hooks */ + .gem_init_object = udl_gem_init_object, + .gem_free_object = udl_gem_free_object, + .gem_vm_ops = &udl_gem_vm_ops, + + .dumb_create = udl_dumb_create, + .dumb_map_offset = udl_gem_mmap, + .dumb_destroy = udl_dumb_destroy, + .fops = &udl_driver_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static struct usb_driver udl_driver = { + .name = "udl", + .probe = udl_usb_probe, + .disconnect = udl_usb_disconnect, + .id_table = id_table, +}; + +static int __init udl_init(void) +{ + return drm_usb_init(&driver, &udl_driver); +} + +static void __exit udl_exit(void) +{ + drm_usb_exit(&driver, &udl_driver); +} + +module_init(udl_init); +module_exit(udl_exit); diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h new file mode 100644 index 00000000000..1612954a5bc --- /dev/null +++ b/drivers/gpu/drm/udl/udl_drv.h @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2012 Red Hat + * + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef UDL_DRV_H +#define UDL_DRV_H + +#include <linux/usb.h> + +#define DRIVER_NAME "udl" +#define DRIVER_DESC "DisplayLink" +#define DRIVER_DATE "20120220" + +#define DRIVER_MAJOR 0 +#define DRIVER_MINOR 0 +#define DRIVER_PATCHLEVEL 1 + +struct udl_device; + +struct urb_node { + struct list_head entry; + struct udl_device *dev; + struct delayed_work release_urb_work; + struct urb *urb; +}; + +struct urb_list { + struct list_head list; + spinlock_t lock; + struct semaphore limit_sem; + int available; + int count; + size_t size; +}; + +struct udl_fbdev; + +struct udl_device { + struct device *dev; + struct drm_device *ddev; + + int sku_pixel_limit; + + struct urb_list urbs; + atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */ + + struct udl_fbdev *fbdev; + char mode_buf[1024]; + uint32_t mode_buf_len; + atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */ + atomic_t bytes_identical; /* saved effort with backbuffer comparison */ + atomic_t bytes_sent; /* to usb, after compression including overhead */ + atomic_t cpu_kcycles_used; /* transpired during pixel processing */ +}; + +struct udl_gem_object { + struct drm_gem_object base; + struct page **pages; + void *vmapping; +}; + +#define to_udl_bo(x) container_of(x, struct udl_gem_object, base) + +struct udl_framebuffer { + struct drm_framebuffer base; + struct udl_gem_object *obj; + bool active_16; /* active on the 16-bit channel */ +}; + +#define to_udl_fb(x) container_of(x, struct udl_framebuffer, base) + +/* modeset */ +int udl_modeset_init(struct drm_device *dev); +void udl_modeset_cleanup(struct drm_device *dev); +int udl_connector_init(struct drm_device *dev, struct drm_encoder *encoder); + +struct drm_encoder *udl_encoder_init(struct drm_device *dev); + +struct urb *udl_get_urb(struct drm_device *dev); + +int udl_submit_urb(struct drm_device *dev, struct urb *urb, size_t len); +void udl_urb_completion(struct urb *urb); + +int udl_driver_load(struct drm_device *dev, unsigned long flags); +int udl_driver_unload(struct drm_device *dev); + +int udl_fbdev_init(struct drm_device *dev); +void udl_fbdev_cleanup(struct drm_device *dev); +void udl_fbdev_unplug(struct drm_device *dev); +struct drm_framebuffer * +udl_fb_user_fb_create(struct drm_device *dev, + struct drm_file *file, + struct drm_mode_fb_cmd2 *mode_cmd); + +int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, + const char *front, char **urb_buf_ptr, + u32 byte_offset, u32 byte_width, + int *ident_ptr, int *sent_ptr); + +int udl_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args); +int udl_gem_mmap(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle, uint64_t *offset); +int udl_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle); + +int udl_gem_init_object(struct drm_gem_object *obj); +void udl_gem_free_object(struct drm_gem_object *gem_obj); +struct udl_gem_object *udl_gem_alloc_object(struct drm_device *dev, + size_t size); + +int udl_gem_vmap(struct udl_gem_object *obj); +void udl_gem_vunmap(struct udl_gem_object *obj); +int udl_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); + +int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, + int width, int height); + +int udl_drop_usb(struct drm_device *dev); + +#define CMD_WRITE_RAW8 "\xAF\x60" /**< 8 bit raw write command. */ +#define CMD_WRITE_RL8 "\xAF\x61" /**< 8 bit run length command. */ +#define CMD_WRITE_COPY8 "\xAF\x62" /**< 8 bit copy command. */ +#define CMD_WRITE_RLX8 "\xAF\x63" /**< 8 bit extended run length command. */ + +#define CMD_WRITE_RAW16 "\xAF\x68" /**< 16 bit raw write command. */ +#define CMD_WRITE_RL16 "\xAF\x69" /**< 16 bit run length command. */ +#define CMD_WRITE_COPY16 "\xAF\x6A" /**< 16 bit copy command. */ +#define CMD_WRITE_RLX16 "\xAF\x6B" /**< 16 bit extended run length command. */ + +#endif diff --git a/drivers/gpu/drm/udl/udl_encoder.c b/drivers/gpu/drm/udl/udl_encoder.c new file mode 100644 index 00000000000..56e75f0f1df --- /dev/null +++ b/drivers/gpu/drm/udl/udl_encoder.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2012 Red Hat + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include "drmP.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "udl_drv.h" + +/* dummy encoder */ +void udl_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); + kfree(encoder); +} + +static void udl_encoder_disable(struct drm_encoder *encoder) +{ +} + +static bool udl_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static void udl_encoder_prepare(struct drm_encoder *encoder) +{ +} + +static void udl_encoder_commit(struct drm_encoder *encoder) +{ +} + +static void udl_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ +} + +static void +udl_encoder_dpms(struct drm_encoder *encoder, int mode) +{ +} + +static const struct drm_encoder_helper_funcs udl_helper_funcs = { + .dpms = udl_encoder_dpms, + .mode_fixup = udl_mode_fixup, + .prepare = udl_encoder_prepare, + .mode_set = udl_encoder_mode_set, + .commit = udl_encoder_commit, + .disable = udl_encoder_disable, +}; + +static const struct drm_encoder_funcs udl_enc_funcs = { + .destroy = udl_enc_destroy, +}; + +struct drm_encoder *udl_encoder_init(struct drm_device *dev) +{ + struct drm_encoder *encoder; + + encoder = kzalloc(sizeof(struct drm_encoder), GFP_KERNEL); + if (!encoder) + return NULL; + + drm_encoder_init(dev, encoder, &udl_enc_funcs, DRM_MODE_ENCODER_TMDS); + drm_encoder_helper_add(encoder, &udl_helper_funcs); + encoder->possible_crtcs = 1; + return encoder; +} diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c new file mode 100644 index 00000000000..4d9c3a5d8a4 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -0,0 +1,611 @@ +/* + * Copyright (C) 2012 Red Hat + * + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/fb.h> + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "udl_drv.h" + +#include "drm_fb_helper.h" + +#define DL_DEFIO_WRITE_DELAY 5 /* fb_deferred_io.delay in jiffies */ + +static int fb_defio = 1; /* Optionally enable experimental fb_defio mmap support */ +static int fb_bpp = 16; + +module_param(fb_bpp, int, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP); +module_param(fb_defio, int, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP); + +struct udl_fbdev { + struct drm_fb_helper helper; + struct udl_framebuffer ufb; + struct list_head fbdev_list; + int fb_count; +}; + +#define DL_ALIGN_UP(x, a) ALIGN(x, a) +#define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a) + +/** Read the red component (0..255) of a 32 bpp colour. */ +#define DLO_RGB_GETRED(col) (uint8_t)((col) & 0xFF) + +/** Read the green component (0..255) of a 32 bpp colour. */ +#define DLO_RGB_GETGRN(col) (uint8_t)(((col) >> 8) & 0xFF) + +/** Read the blue component (0..255) of a 32 bpp colour. */ +#define DLO_RGB_GETBLU(col) (uint8_t)(((col) >> 16) & 0xFF) + +/** Return red/green component of a 16 bpp colour number. */ +#define DLO_RG16(red, grn) (uint8_t)((((red) & 0xF8) | ((grn) >> 5)) & 0xFF) + +/** Return green/blue component of a 16 bpp colour number. */ +#define DLO_GB16(grn, blu) (uint8_t)(((((grn) & 0x1C) << 3) | ((blu) >> 3)) & 0xFF) + +/** Return 8 bpp colour number from red, green and blue components. */ +#define DLO_RGB8(red, grn, blu) ((((red) << 5) | (((grn) & 3) << 3) | ((blu) & 7)) & 0xFF) + +#if 0 +static uint8_t rgb8(uint32_t col) +{ + uint8_t red = DLO_RGB_GETRED(col); + uint8_t grn = DLO_RGB_GETGRN(col); + uint8_t blu = DLO_RGB_GETBLU(col); + + return DLO_RGB8(red, grn, blu); +} + +static uint16_t rgb16(uint32_t col) +{ + uint8_t red = DLO_RGB_GETRED(col); + uint8_t grn = DLO_RGB_GETGRN(col); + uint8_t blu = DLO_RGB_GETBLU(col); + + return (DLO_RG16(red, grn) << 8) + DLO_GB16(grn, blu); +} +#endif + +/* + * NOTE: fb_defio.c is holding info->fbdefio.mutex + * Touching ANY framebuffer memory that triggers a page fault + * in fb_defio will cause a deadlock, when it also tries to + * grab the same mutex. + */ +static void udlfb_dpy_deferred_io(struct fb_info *info, + struct list_head *pagelist) +{ + struct page *cur; + struct fb_deferred_io *fbdefio = info->fbdefio; + struct udl_fbdev *ufbdev = info->par; + struct drm_device *dev = ufbdev->ufb.base.dev; + struct udl_device *udl = dev->dev_private; + struct urb *urb; + char *cmd; + cycles_t start_cycles, end_cycles; + int bytes_sent = 0; + int bytes_identical = 0; + int bytes_rendered = 0; + + if (!fb_defio) + return; + + start_cycles = get_cycles(); + + urb = udl_get_urb(dev); + if (!urb) + return; + + cmd = urb->transfer_buffer; + + /* walk the written page list and render each to device */ + list_for_each_entry(cur, &fbdefio->pagelist, lru) { + + if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8), + &urb, (char *) info->fix.smem_start, + &cmd, cur->index << PAGE_SHIFT, + PAGE_SIZE, &bytes_identical, &bytes_sent)) + goto error; + bytes_rendered += PAGE_SIZE; + } + + if (cmd > (char *) urb->transfer_buffer) { + /* Send partial buffer remaining before exiting */ + int len = cmd - (char *) urb->transfer_buffer; + udl_submit_urb(dev, urb, len); + bytes_sent += len; + } else + udl_urb_completion(urb); + +error: + atomic_add(bytes_sent, &udl->bytes_sent); + atomic_add(bytes_identical, &udl->bytes_identical); + atomic_add(bytes_rendered, &udl->bytes_rendered); + end_cycles = get_cycles(); + atomic_add(((unsigned int) ((end_cycles - start_cycles) + >> 10)), /* Kcycles */ + &udl->cpu_kcycles_used); +} + +int udl_handle_damage(struct udl_framebuffer *fb, int x, int y, + int width, int height) +{ + struct drm_device *dev = fb->base.dev; + struct udl_device *udl = dev->dev_private; + int i, ret; + char *cmd; + cycles_t start_cycles, end_cycles; + int bytes_sent = 0; + int bytes_identical = 0; + struct urb *urb; + int aligned_x; + int bpp = (fb->base.bits_per_pixel / 8); + + if (!fb->active_16) + return 0; + + if (!fb->obj->vmapping) + udl_gem_vmap(fb->obj); + + start_cycles = get_cycles(); + + aligned_x = DL_ALIGN_DOWN(x, sizeof(unsigned long)); + width = DL_ALIGN_UP(width + (x-aligned_x), sizeof(unsigned long)); + x = aligned_x; + + if ((width <= 0) || + (x + width > fb->base.width) || + (y + height > fb->base.height)) + return -EINVAL; + + urb = udl_get_urb(dev); + if (!urb) + return 0; + cmd = urb->transfer_buffer; + + for (i = y; i < y + height ; i++) { + const int line_offset = fb->base.pitches[0] * i; + const int byte_offset = line_offset + (x * bpp); + + if (udl_render_hline(dev, bpp, &urb, + (char *) fb->obj->vmapping, + &cmd, byte_offset, width * bpp, + &bytes_identical, &bytes_sent)) + goto error; + } + + if (cmd > (char *) urb->transfer_buffer) { + /* Send partial buffer remaining before exiting */ + int len = cmd - (char *) urb->transfer_buffer; + ret = udl_submit_urb(dev, urb, len); + bytes_sent += len; + } else + udl_urb_completion(urb); + +error: + atomic_add(bytes_sent, &udl->bytes_sent); + atomic_add(bytes_identical, &udl->bytes_identical); + atomic_add(width*height*bpp, &udl->bytes_rendered); + end_cycles = get_cycles(); + atomic_add(((unsigned int) ((end_cycles - start_cycles) + >> 10)), /* Kcycles */ + &udl->cpu_kcycles_used); + + return 0; +} + +static int udl_fb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end - vma->vm_start; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long page, pos; + + if (offset + size > info->fix.smem_len) + return -EINVAL; + + pos = (unsigned long)info->fix.smem_start + offset; + + pr_notice("mmap() framebuffer addr:%lu size:%lu\n", + pos, size); + + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ + return 0; +} + +static void udl_fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct udl_fbdev *ufbdev = info->par; + + sys_fillrect(info, rect); + + udl_handle_damage(&ufbdev->ufb, rect->dx, rect->dy, rect->width, + rect->height); +} + +static void udl_fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) +{ + struct udl_fbdev *ufbdev = info->par; + + sys_copyarea(info, region); + + udl_handle_damage(&ufbdev->ufb, region->dx, region->dy, region->width, + region->height); +} + +static void udl_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct udl_fbdev *ufbdev = info->par; + + sys_imageblit(info, image); + + udl_handle_damage(&ufbdev->ufb, image->dx, image->dy, image->width, + image->height); +} + +/* + * It's common for several clients to have framebuffer open simultaneously. + * e.g. both fbcon and X. Makes things interesting. + * Assumes caller is holding info->lock (for open and release at least) + */ +static int udl_fb_open(struct fb_info *info, int user) +{ + struct udl_fbdev *ufbdev = info->par; + struct drm_device *dev = ufbdev->ufb.base.dev; + struct udl_device *udl = dev->dev_private; + + /* If the USB device is gone, we don't accept new opens */ + if (drm_device_is_unplugged(udl->ddev)) + return -ENODEV; + + ufbdev->fb_count++; + + if (fb_defio && (info->fbdefio == NULL)) { + /* enable defio at last moment if not disabled by client */ + + struct fb_deferred_io *fbdefio; + + fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL); + + if (fbdefio) { + fbdefio->delay = DL_DEFIO_WRITE_DELAY; + fbdefio->deferred_io = udlfb_dpy_deferred_io; + } + + info->fbdefio = fbdefio; + fb_deferred_io_init(info); + } + + pr_notice("open /dev/fb%d user=%d fb_info=%p count=%d\n", + info->node, user, info, ufbdev->fb_count); + + return 0; +} + + +/* + * Assumes caller is holding info->lock mutex (for open and release at least) + */ +static int udl_fb_release(struct fb_info *info, int user) +{ + struct udl_fbdev *ufbdev = info->par; + + ufbdev->fb_count--; + + if ((ufbdev->fb_count == 0) && (info->fbdefio)) { + fb_deferred_io_cleanup(info); + kfree(info->fbdefio); + info->fbdefio = NULL; + info->fbops->fb_mmap = udl_fb_mmap; + } + + pr_warn("released /dev/fb%d user=%d count=%d\n", + info->node, user, ufbdev->fb_count); + + return 0; +} + +static struct fb_ops udlfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = drm_fb_helper_check_var, + .fb_set_par = drm_fb_helper_set_par, + .fb_fillrect = udl_fb_fillrect, + .fb_copyarea = udl_fb_copyarea, + .fb_imageblit = udl_fb_imageblit, + .fb_pan_display = drm_fb_helper_pan_display, + .fb_blank = drm_fb_helper_blank, + .fb_setcmap = drm_fb_helper_setcmap, + .fb_debug_enter = drm_fb_helper_debug_enter, + .fb_debug_leave = drm_fb_helper_debug_leave, + .fb_mmap = udl_fb_mmap, + .fb_open = udl_fb_open, + .fb_release = udl_fb_release, +}; + +void udl_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno) +{ +} + +void udl_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, int regno) +{ + *red = 0; + *green = 0; + *blue = 0; +} + +static int udl_user_framebuffer_dirty(struct drm_framebuffer *fb, + struct drm_file *file, + unsigned flags, unsigned color, + struct drm_clip_rect *clips, + unsigned num_clips) +{ + struct udl_framebuffer *ufb = to_udl_fb(fb); + int i; + + if (!ufb->active_16) + return 0; + + for (i = 0; i < num_clips; i++) { + udl_handle_damage(ufb, clips[i].x1, clips[i].y1, + clips[i].x2 - clips[i].x1, + clips[i].y2 - clips[i].y1); + } + return 0; +} + +static void udl_user_framebuffer_destroy(struct drm_framebuffer *fb) +{ + struct udl_framebuffer *ufb = to_udl_fb(fb); + + if (ufb->obj) + drm_gem_object_unreference_unlocked(&ufb->obj->base); + + drm_framebuffer_cleanup(fb); + kfree(ufb); +} + +static const struct drm_framebuffer_funcs udlfb_funcs = { + .destroy = udl_user_framebuffer_destroy, + .dirty = udl_user_framebuffer_dirty, + .create_handle = NULL, +}; + + +static int +udl_framebuffer_init(struct drm_device *dev, + struct udl_framebuffer *ufb, + struct drm_mode_fb_cmd2 *mode_cmd, + struct udl_gem_object *obj) +{ + int ret; + + ufb->obj = obj; + ret = drm_framebuffer_init(dev, &ufb->base, &udlfb_funcs); + drm_helper_mode_fill_fb_struct(&ufb->base, mode_cmd); + return ret; +} + + +static int udlfb_create(struct udl_fbdev *ufbdev, + struct drm_fb_helper_surface_size *sizes) +{ + struct drm_device *dev = ufbdev->helper.dev; + struct fb_info *info; + struct device *device = &dev->usbdev->dev; + struct drm_framebuffer *fb; + struct drm_mode_fb_cmd2 mode_cmd; + struct udl_gem_object *obj; + uint32_t size; + int ret = 0; + + if (sizes->surface_bpp == 24) + sizes->surface_bpp = 32; + + mode_cmd.width = sizes->surface_width; + mode_cmd.height = sizes->surface_height; + mode_cmd.pitches[0] = mode_cmd.width * ((sizes->surface_bpp + 7) / 8); + + mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, + sizes->surface_depth); + + size = mode_cmd.pitches[0] * mode_cmd.height; + size = ALIGN(size, PAGE_SIZE); + + obj = udl_gem_alloc_object(dev, size); + if (!obj) + goto out; + + ret = udl_gem_vmap(obj); + if (ret) { + DRM_ERROR("failed to vmap fb\n"); + goto out_gfree; + } + + info = framebuffer_alloc(0, device); + if (!info) { + ret = -ENOMEM; + goto out_gfree; + } + info->par = ufbdev; + + ret = udl_framebuffer_init(dev, &ufbdev->ufb, &mode_cmd, obj); + if (ret) + goto out_gfree; + + fb = &ufbdev->ufb.base; + + ufbdev->helper.fb = fb; + ufbdev->helper.fbdev = info; + + strcpy(info->fix.id, "udldrmfb"); + + info->screen_base = ufbdev->ufb.obj->vmapping; + info->fix.smem_len = size; + info->fix.smem_start = (unsigned long)ufbdev->ufb.obj->vmapping; + + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; + info->fbops = &udlfb_ops; + drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth); + drm_fb_helper_fill_var(info, &ufbdev->helper, sizes->fb_width, sizes->fb_height); + + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (ret) { + ret = -ENOMEM; + goto out_gfree; + } + + + DRM_DEBUG_KMS("allocated %dx%d vmal %p\n", + fb->width, fb->height, + ufbdev->ufb.obj->vmapping); + + return ret; +out_gfree: + drm_gem_object_unreference(&ufbdev->ufb.obj->base); +out: + return ret; +} + +static int udl_fb_find_or_create_single(struct drm_fb_helper *helper, + struct drm_fb_helper_surface_size *sizes) +{ + struct udl_fbdev *ufbdev = (struct udl_fbdev *)helper; + int new_fb = 0; + int ret; + + if (!helper->fb) { + ret = udlfb_create(ufbdev, sizes); + if (ret) + return ret; + + new_fb = 1; + } + return new_fb; +} + +static struct drm_fb_helper_funcs udl_fb_helper_funcs = { + .gamma_set = udl_crtc_fb_gamma_set, + .gamma_get = udl_crtc_fb_gamma_get, + .fb_probe = udl_fb_find_or_create_single, +}; + +static void udl_fbdev_destroy(struct drm_device *dev, + struct udl_fbdev *ufbdev) +{ + struct fb_info *info; + if (ufbdev->helper.fbdev) { + info = ufbdev->helper.fbdev; + unregister_framebuffer(info); + if (info->cmap.len) + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + } + drm_fb_helper_fini(&ufbdev->helper); + drm_framebuffer_cleanup(&ufbdev->ufb.base); + drm_gem_object_unreference_unlocked(&ufbdev->ufb.obj->base); +} + +int udl_fbdev_init(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + int bpp_sel = fb_bpp; + struct udl_fbdev *ufbdev; + int ret; + + ufbdev = kzalloc(sizeof(struct udl_fbdev), GFP_KERNEL); + if (!ufbdev) + return -ENOMEM; + + udl->fbdev = ufbdev; + ufbdev->helper.funcs = &udl_fb_helper_funcs; + + ret = drm_fb_helper_init(dev, &ufbdev->helper, + 1, 1); + if (ret) { + kfree(ufbdev); + return ret; + + } + + drm_fb_helper_single_add_all_connectors(&ufbdev->helper); + drm_fb_helper_initial_config(&ufbdev->helper, bpp_sel); + return 0; +} + +void udl_fbdev_cleanup(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + if (!udl->fbdev) + return; + + udl_fbdev_destroy(dev, udl->fbdev); + kfree(udl->fbdev); + udl->fbdev = NULL; +} + +void udl_fbdev_unplug(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + struct udl_fbdev *ufbdev; + if (!udl->fbdev) + return; + + ufbdev = udl->fbdev; + if (ufbdev->helper.fbdev) { + struct fb_info *info; + info = ufbdev->helper.fbdev; + unlink_framebuffer(info); + } +} + +struct drm_framebuffer * +udl_fb_user_fb_create(struct drm_device *dev, + struct drm_file *file, + struct drm_mode_fb_cmd2 *mode_cmd) +{ + struct drm_gem_object *obj; + struct udl_framebuffer *ufb; + int ret; + + obj = drm_gem_object_lookup(dev, file, mode_cmd->handles[0]); + if (obj == NULL) + return ERR_PTR(-ENOENT); + + ufb = kzalloc(sizeof(*ufb), GFP_KERNEL); + if (ufb == NULL) + return ERR_PTR(-ENOMEM); + + ret = udl_framebuffer_init(dev, ufb, mode_cmd, to_udl_bo(obj)); + if (ret) { + kfree(ufb); + return ERR_PTR(-EINVAL); + } + return &ufb->base; +} diff --git a/drivers/gpu/drm/udl/udl_gem.c b/drivers/gpu/drm/udl/udl_gem.c new file mode 100644 index 00000000000..852642dc118 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_gem.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2012 Red Hat + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include "drmP.h" +#include "udl_drv.h" +#include <linux/shmem_fs.h> + +struct udl_gem_object *udl_gem_alloc_object(struct drm_device *dev, + size_t size) +{ + struct udl_gem_object *obj; + + obj = kzalloc(sizeof(*obj), GFP_KERNEL); + if (obj == NULL) + return NULL; + + if (drm_gem_object_init(dev, &obj->base, size) != 0) { + kfree(obj); + return NULL; + } + + return obj; +} + +static int +udl_gem_create(struct drm_file *file, + struct drm_device *dev, + uint64_t size, + uint32_t *handle_p) +{ + struct udl_gem_object *obj; + int ret; + u32 handle; + + size = roundup(size, PAGE_SIZE); + + obj = udl_gem_alloc_object(dev, size); + if (obj == NULL) + return -ENOMEM; + + ret = drm_gem_handle_create(file, &obj->base, &handle); + if (ret) { + drm_gem_object_release(&obj->base); + kfree(obj); + return ret; + } + + drm_gem_object_unreference(&obj->base); + *handle_p = handle; + return 0; +} + +int udl_dumb_create(struct drm_file *file, + struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + args->pitch = args->width * ((args->bpp + 1) / 8); + args->size = args->pitch * args->height; + return udl_gem_create(file, dev, + args->size, &args->handle); +} + +int udl_dumb_destroy(struct drm_file *file, struct drm_device *dev, + uint32_t handle) +{ + return drm_gem_handle_delete(file, handle); +} + +int udl_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct udl_gem_object *obj = to_udl_bo(vma->vm_private_data); + struct page *page; + unsigned int page_offset; + int ret = 0; + + page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> + PAGE_SHIFT; + + if (!obj->pages) + return VM_FAULT_SIGBUS; + + page = obj->pages[page_offset]; + ret = vm_insert_page(vma, (unsigned long)vmf->virtual_address, page); + switch (ret) { + case -EAGAIN: + set_need_resched(); + case 0: + case -ERESTARTSYS: + return VM_FAULT_NOPAGE; + case -ENOMEM: + return VM_FAULT_OOM; + default: + return VM_FAULT_SIGBUS; + } +} + +int udl_gem_init_object(struct drm_gem_object *obj) +{ + BUG(); + + return 0; +} + +static int udl_gem_get_pages(struct udl_gem_object *obj, gfp_t gfpmask) +{ + int page_count, i; + struct page *page; + struct inode *inode; + struct address_space *mapping; + + if (obj->pages) + return 0; + + page_count = obj->base.size / PAGE_SIZE; + BUG_ON(obj->pages != NULL); + obj->pages = drm_malloc_ab(page_count, sizeof(struct page *)); + if (obj->pages == NULL) + return -ENOMEM; + + inode = obj->base.filp->f_path.dentry->d_inode; + mapping = inode->i_mapping; + gfpmask |= mapping_gfp_mask(mapping); + + for (i = 0; i < page_count; i++) { + page = shmem_read_mapping_page_gfp(mapping, i, gfpmask); + if (IS_ERR(page)) + goto err_pages; + obj->pages[i] = page; + } + + return 0; +err_pages: + while (i--) + page_cache_release(obj->pages[i]); + drm_free_large(obj->pages); + obj->pages = NULL; + return PTR_ERR(page); +} + +static void udl_gem_put_pages(struct udl_gem_object *obj) +{ + int page_count = obj->base.size / PAGE_SIZE; + int i; + + for (i = 0; i < page_count; i++) + page_cache_release(obj->pages[i]); + + drm_free_large(obj->pages); + obj->pages = NULL; +} + +int udl_gem_vmap(struct udl_gem_object *obj) +{ + int page_count = obj->base.size / PAGE_SIZE; + int ret; + + ret = udl_gem_get_pages(obj, GFP_KERNEL); + if (ret) + return ret; + + obj->vmapping = vmap(obj->pages, page_count, 0, PAGE_KERNEL); + if (!obj->vmapping) + return -ENOMEM; + return 0; +} + +void udl_gem_vunmap(struct udl_gem_object *obj) +{ + if (obj->vmapping) + vunmap(obj->vmapping); + + udl_gem_put_pages(obj); +} + +void udl_gem_free_object(struct drm_gem_object *gem_obj) +{ + struct udl_gem_object *obj = to_udl_bo(gem_obj); + + if (obj->vmapping) + udl_gem_vunmap(obj); + + if (obj->pages) + udl_gem_put_pages(obj); + + if (gem_obj->map_list.map) + drm_gem_free_mmap_offset(gem_obj); +} + +/* the dumb interface doesn't work with the GEM straight MMAP + interface, it expects to do MMAP on the drm fd, like normal */ +int udl_gem_mmap(struct drm_file *file, struct drm_device *dev, + uint32_t handle, uint64_t *offset) +{ + struct udl_gem_object *gobj; + struct drm_gem_object *obj; + int ret = 0; + + mutex_lock(&dev->struct_mutex); + obj = drm_gem_object_lookup(dev, file, handle); + if (obj == NULL) { + ret = -ENOENT; + goto unlock; + } + gobj = to_udl_bo(obj); + + ret = udl_gem_get_pages(gobj, GFP_KERNEL); + if (ret) + return ret; + if (!gobj->base.map_list.map) { + ret = drm_gem_create_mmap_offset(obj); + if (ret) + goto out; + } + + *offset = (u64)gobj->base.map_list.hash.key << PAGE_SHIFT; + +out: + drm_gem_object_unreference(&gobj->base); +unlock: + mutex_unlock(&dev->struct_mutex); + return ret; +} diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c new file mode 100644 index 00000000000..a8d5f09428c --- /dev/null +++ b/drivers/gpu/drm/udl/udl_main.c @@ -0,0 +1,338 @@ +/* + * Copyright (C) 2012 Red Hat + * + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ +#include "drmP.h" +#include "udl_drv.h" + +/* -BULK_SIZE as per usb-skeleton. Can we get full page and avoid overhead? */ +#define BULK_SIZE 512 + +#define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE) +#define WRITES_IN_FLIGHT (4) +#define MAX_VENDOR_DESCRIPTOR_SIZE 256 + +#define GET_URB_TIMEOUT HZ +#define FREE_URB_TIMEOUT (HZ*2) + +static int udl_parse_vendor_descriptor(struct drm_device *dev, + struct usb_device *usbdev) +{ + struct udl_device *udl = dev->dev_private; + char *desc; + char *buf; + char *desc_end; + + u8 total_len = 0; + + buf = kzalloc(MAX_VENDOR_DESCRIPTOR_SIZE, GFP_KERNEL); + if (!buf) + return false; + desc = buf; + + total_len = usb_get_descriptor(usbdev, 0x5f, /* vendor specific */ + 0, desc, MAX_VENDOR_DESCRIPTOR_SIZE); + if (total_len > 5) { + DRM_INFO("vendor descriptor length:%x data:%02x %02x %02x %02x" \ + "%02x %02x %02x %02x %02x %02x %02x\n", + total_len, desc[0], + desc[1], desc[2], desc[3], desc[4], desc[5], desc[6], + desc[7], desc[8], desc[9], desc[10]); + + if ((desc[0] != total_len) || /* descriptor length */ + (desc[1] != 0x5f) || /* vendor descriptor type */ + (desc[2] != 0x01) || /* version (2 bytes) */ + (desc[3] != 0x00) || + (desc[4] != total_len - 2)) /* length after type */ + goto unrecognized; + + desc_end = desc + total_len; + desc += 5; /* the fixed header we've already parsed */ + + while (desc < desc_end) { + u8 length; + u16 key; + + key = *((u16 *) desc); + desc += sizeof(u16); + length = *desc; + desc++; + + switch (key) { + case 0x0200: { /* max_area */ + u32 max_area; + max_area = le32_to_cpu(*((u32 *)desc)); + DRM_DEBUG("DL chip limited to %d pixel modes\n", + max_area); + udl->sku_pixel_limit = max_area; + break; + } + default: + break; + } + desc += length; + } + } + + goto success; + +unrecognized: + /* allow udlfb to load for now even if firmware unrecognized */ + DRM_ERROR("Unrecognized vendor firmware descriptor\n"); + +success: + kfree(buf); + return true; +} + +static void udl_release_urb_work(struct work_struct *work) +{ + struct urb_node *unode = container_of(work, struct urb_node, + release_urb_work.work); + + up(&unode->dev->urbs.limit_sem); +} + +void udl_urb_completion(struct urb *urb) +{ + struct urb_node *unode = urb->context; + struct udl_device *udl = unode->dev; + unsigned long flags; + + /* sync/async unlink faults aren't errors */ + if (urb->status) { + if (!(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN)) { + DRM_ERROR("%s - nonzero write bulk status received: %d\n", + __func__, urb->status); + atomic_set(&udl->lost_pixels, 1); + } + } + + urb->transfer_buffer_length = udl->urbs.size; /* reset to actual */ + + spin_lock_irqsave(&udl->urbs.lock, flags); + list_add_tail(&unode->entry, &udl->urbs.list); + udl->urbs.available++; + spin_unlock_irqrestore(&udl->urbs.lock, flags); + +#if 0 + /* + * When using fb_defio, we deadlock if up() is called + * while another is waiting. So queue to another process. + */ + if (fb_defio) + schedule_delayed_work(&unode->release_urb_work, 0); + else +#endif + up(&udl->urbs.limit_sem); +} + +static void udl_free_urb_list(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + int count = udl->urbs.count; + struct list_head *node; + struct urb_node *unode; + struct urb *urb; + int ret; + unsigned long flags; + + DRM_DEBUG("Waiting for completes and freeing all render urbs\n"); + + /* keep waiting and freeing, until we've got 'em all */ + while (count--) { + + /* Getting interrupted means a leak, but ok at shutdown*/ + ret = down_interruptible(&udl->urbs.limit_sem); + if (ret) + break; + + spin_lock_irqsave(&udl->urbs.lock, flags); + + node = udl->urbs.list.next; /* have reserved one with sem */ + list_del_init(node); + + spin_unlock_irqrestore(&udl->urbs.lock, flags); + + unode = list_entry(node, struct urb_node, entry); + urb = unode->urb; + + /* Free each separately allocated piece */ + usb_free_coherent(urb->dev, udl->urbs.size, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); + kfree(node); + } + udl->urbs.count = 0; +} + +static int udl_alloc_urb_list(struct drm_device *dev, int count, size_t size) +{ + struct udl_device *udl = dev->dev_private; + int i = 0; + struct urb *urb; + struct urb_node *unode; + char *buf; + + spin_lock_init(&udl->urbs.lock); + + udl->urbs.size = size; + INIT_LIST_HEAD(&udl->urbs.list); + + while (i < count) { + unode = kzalloc(sizeof(struct urb_node), GFP_KERNEL); + if (!unode) + break; + unode->dev = udl; + + INIT_DELAYED_WORK(&unode->release_urb_work, + udl_release_urb_work); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + kfree(unode); + break; + } + unode->urb = urb; + + buf = usb_alloc_coherent(udl->ddev->usbdev, MAX_TRANSFER, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + kfree(unode); + usb_free_urb(urb); + break; + } + + /* urb->transfer_buffer_length set to actual before submit */ + usb_fill_bulk_urb(urb, udl->ddev->usbdev, usb_sndbulkpipe(udl->ddev->usbdev, 1), + buf, size, udl_urb_completion, unode); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + list_add_tail(&unode->entry, &udl->urbs.list); + + i++; + } + + sema_init(&udl->urbs.limit_sem, i); + udl->urbs.count = i; + udl->urbs.available = i; + + DRM_DEBUG("allocated %d %d byte urbs\n", i, (int) size); + + return i; +} + +struct urb *udl_get_urb(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + int ret = 0; + struct list_head *entry; + struct urb_node *unode; + struct urb *urb = NULL; + unsigned long flags; + + /* Wait for an in-flight buffer to complete and get re-queued */ + ret = down_timeout(&udl->urbs.limit_sem, GET_URB_TIMEOUT); + if (ret) { + atomic_set(&udl->lost_pixels, 1); + DRM_INFO("wait for urb interrupted: %x available: %d\n", + ret, udl->urbs.available); + goto error; + } + + spin_lock_irqsave(&udl->urbs.lock, flags); + + BUG_ON(list_empty(&udl->urbs.list)); /* reserved one with limit_sem */ + entry = udl->urbs.list.next; + list_del_init(entry); + udl->urbs.available--; + + spin_unlock_irqrestore(&udl->urbs.lock, flags); + + unode = list_entry(entry, struct urb_node, entry); + urb = unode->urb; + +error: + return urb; +} + +int udl_submit_urb(struct drm_device *dev, struct urb *urb, size_t len) +{ + struct udl_device *udl = dev->dev_private; + int ret; + + BUG_ON(len > udl->urbs.size); + + urb->transfer_buffer_length = len; /* set to actual payload len */ + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + udl_urb_completion(urb); /* because no one else will */ + atomic_set(&udl->lost_pixels, 1); + DRM_ERROR("usb_submit_urb error %x\n", ret); + } + return ret; +} + +int udl_driver_load(struct drm_device *dev, unsigned long flags) +{ + struct udl_device *udl; + int ret; + + DRM_DEBUG("\n"); + udl = kzalloc(sizeof(struct udl_device), GFP_KERNEL); + if (!udl) + return -ENOMEM; + + udl->ddev = dev; + dev->dev_private = udl; + + if (!udl_parse_vendor_descriptor(dev, dev->usbdev)) { + DRM_ERROR("firmware not recognized. Assume incompatible device\n"); + goto err; + } + + if (!udl_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) { + ret = -ENOMEM; + DRM_ERROR("udl_alloc_urb_list failed\n"); + goto err; + } + + DRM_DEBUG("\n"); + ret = udl_modeset_init(dev); + + ret = udl_fbdev_init(dev); + return 0; +err: + kfree(udl); + DRM_ERROR("%d\n", ret); + return ret; +} + +int udl_drop_usb(struct drm_device *dev) +{ + udl_free_urb_list(dev); + return 0; +} + +int udl_driver_unload(struct drm_device *dev) +{ + struct udl_device *udl = dev->dev_private; + + if (udl->urbs.count) + udl_free_urb_list(dev); + + udl_fbdev_cleanup(dev); + udl_modeset_cleanup(dev); + kfree(udl); + return 0; +} diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c new file mode 100644 index 00000000000..b3ecb3d12a1 --- /dev/null +++ b/drivers/gpu/drm/udl/udl_modeset.c @@ -0,0 +1,414 @@ +/* + * Copyright (C) 2012 Red Hat + * + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include "drmP.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "udl_drv.h" + +/* + * All DisplayLink bulk operations start with 0xAF, followed by specific code + * All operations are written to buffers which then later get sent to device + */ +static char *udl_set_register(char *buf, u8 reg, u8 val) +{ + *buf++ = 0xAF; + *buf++ = 0x20; + *buf++ = reg; + *buf++ = val; + return buf; +} + +static char *udl_vidreg_lock(char *buf) +{ + return udl_set_register(buf, 0xFF, 0x00); +} + +static char *udl_vidreg_unlock(char *buf) +{ + return udl_set_register(buf, 0xFF, 0xFF); +} + +/* + * On/Off for driving the DisplayLink framebuffer to the display + * 0x00 H and V sync on + * 0x01 H and V sync off (screen blank but powered) + * 0x07 DPMS powerdown (requires modeset to come back) + */ +static char *udl_enable_hvsync(char *buf, bool enable) +{ + if (enable) + return udl_set_register(buf, 0x1F, 0x00); + else + return udl_set_register(buf, 0x1F, 0x07); +} + +static char *udl_set_color_depth(char *buf, u8 selection) +{ + return udl_set_register(buf, 0x00, selection); +} + +static char *udl_set_base16bpp(char *wrptr, u32 base) +{ + /* the base pointer is 16 bits wide, 0x20 is hi byte. */ + wrptr = udl_set_register(wrptr, 0x20, base >> 16); + wrptr = udl_set_register(wrptr, 0x21, base >> 8); + return udl_set_register(wrptr, 0x22, base); +} + +/* + * DisplayLink HW has separate 16bpp and 8bpp framebuffers. + * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer + */ +static char *udl_set_base8bpp(char *wrptr, u32 base) +{ + wrptr = udl_set_register(wrptr, 0x26, base >> 16); + wrptr = udl_set_register(wrptr, 0x27, base >> 8); + return udl_set_register(wrptr, 0x28, base); +} + +static char *udl_set_register_16(char *wrptr, u8 reg, u16 value) +{ + wrptr = udl_set_register(wrptr, reg, value >> 8); + return udl_set_register(wrptr, reg+1, value); +} + +/* + * This is kind of weird because the controller takes some + * register values in a different byte order than other registers. + */ +static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value) +{ + wrptr = udl_set_register(wrptr, reg, value); + return udl_set_register(wrptr, reg+1, value >> 8); +} + +/* + * LFSR is linear feedback shift register. The reason we have this is + * because the display controller needs to minimize the clock depth of + * various counters used in the display path. So this code reverses the + * provided value into the lfsr16 value by counting backwards to get + * the value that needs to be set in the hardware comparator to get the + * same actual count. This makes sense once you read above a couple of + * times and think about it from a hardware perspective. + */ +static u16 udl_lfsr16(u16 actual_count) +{ + u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */ + + while (actual_count--) { + lv = ((lv << 1) | + (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1)) + & 0xFFFF; + } + + return (u16) lv; +} + +/* + * This does LFSR conversion on the value that is to be written. + * See LFSR explanation above for more detail. + */ +static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value) +{ + return udl_set_register_16(wrptr, reg, udl_lfsr16(value)); +} + +/* + * This takes a standard fbdev screeninfo struct and all of its monitor mode + * details and converts them into the DisplayLink equivalent register commands. + ERR(vreg(dev, 0x00, (color_depth == 16) ? 0 : 1)); + ERR(vreg_lfsr16(dev, 0x01, xDisplayStart)); + ERR(vreg_lfsr16(dev, 0x03, xDisplayEnd)); + ERR(vreg_lfsr16(dev, 0x05, yDisplayStart)); + ERR(vreg_lfsr16(dev, 0x07, yDisplayEnd)); + ERR(vreg_lfsr16(dev, 0x09, xEndCount)); + ERR(vreg_lfsr16(dev, 0x0B, hSyncStart)); + ERR(vreg_lfsr16(dev, 0x0D, hSyncEnd)); + ERR(vreg_big_endian(dev, 0x0F, hPixels)); + ERR(vreg_lfsr16(dev, 0x11, yEndCount)); + ERR(vreg_lfsr16(dev, 0x13, vSyncStart)); + ERR(vreg_lfsr16(dev, 0x15, vSyncEnd)); + ERR(vreg_big_endian(dev, 0x17, vPixels)); + ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz)); + + ERR(vreg(dev, 0x1F, 0)); + + ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK))); + */ +static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode) +{ + u16 xds, yds; + u16 xde, yde; + u16 yec; + + /* x display start */ + xds = mode->crtc_htotal - mode->crtc_hsync_start; + wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds); + /* x display end */ + xde = xds + mode->crtc_hdisplay; + wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde); + + /* y display start */ + yds = mode->crtc_vtotal - mode->crtc_vsync_start; + wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds); + /* y display end */ + yde = yds + mode->crtc_vdisplay; + wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde); + + /* x end count is active + blanking - 1 */ + wrptr = udl_set_register_lfsr16(wrptr, 0x09, + mode->crtc_htotal - 1); + + /* libdlo hardcodes hsync start to 1 */ + wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1); + + /* hsync end is width of sync pulse + 1 */ + wrptr = udl_set_register_lfsr16(wrptr, 0x0D, + mode->crtc_hsync_end - mode->crtc_hsync_start + 1); + + /* hpixels is active pixels */ + wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay); + + /* yendcount is vertical active + vertical blanking */ + yec = mode->crtc_vtotal; + wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec); + + /* libdlo hardcodes vsync start to 0 */ + wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0); + + /* vsync end is width of vsync pulse */ + wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start); + + /* vpixels is active pixels */ + wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay); + + wrptr = udl_set_register_16be(wrptr, 0x1B, + mode->clock / 5); + + return wrptr; +} + +static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct udl_device *udl = dev->dev_private; + struct urb *urb; + char *buf; + int retval; + + urb = udl_get_urb(dev); + if (!urb) + return -ENOMEM; + + buf = (char *)urb->transfer_buffer; + + memcpy(buf, udl->mode_buf, udl->mode_buf_len); + retval = udl_submit_urb(dev, urb, udl->mode_buf_len); + DRM_INFO("write mode info %d\n", udl->mode_buf_len); + return retval; +} + + +static void udl_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct udl_device *udl = dev->dev_private; + int retval; + + if (mode == DRM_MODE_DPMS_OFF) { + char *buf; + struct urb *urb; + urb = udl_get_urb(dev); + if (!urb) + return; + + buf = (char *)urb->transfer_buffer; + buf = udl_vidreg_lock(buf); + buf = udl_enable_hvsync(buf, false); + buf = udl_vidreg_unlock(buf); + + retval = udl_submit_urb(dev, urb, buf - (char *) + urb->transfer_buffer); + } else { + if (udl->mode_buf_len == 0) { + DRM_ERROR("Trying to enable DPMS with no mode\n"); + return; + } + udl_crtc_write_mode_to_hw(crtc); + } + +} + +static bool udl_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) + +{ + return true; +} + +#if 0 +static int +udl_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, + int x, int y, enum mode_set_atomic state) +{ + return 0; +} + +static int +udl_pipe_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + return 0; +} +#endif + +static int udl_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) + +{ + struct drm_device *dev = crtc->dev; + struct udl_framebuffer *ufb = to_udl_fb(crtc->fb); + struct udl_device *udl = dev->dev_private; + char *buf; + char *wrptr; + int color_depth = 0; + + buf = (char *)udl->mode_buf; + + /* for now we just clip 24 -> 16 - if we fix that fix this */ + /*if (crtc->fb->bits_per_pixel != 16) + color_depth = 1; */ + + /* This first section has to do with setting the base address on the + * controller * associated with the display. There are 2 base + * pointers, currently, we only * use the 16 bpp segment. + */ + wrptr = udl_vidreg_lock(buf); + wrptr = udl_set_color_depth(wrptr, color_depth); + /* set base for 16bpp segment to 0 */ + wrptr = udl_set_base16bpp(wrptr, 0); + /* set base for 8bpp segment to end of fb */ + wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay); + + wrptr = udl_set_vid_cmds(wrptr, adjusted_mode); + wrptr = udl_enable_hvsync(wrptr, true); + wrptr = udl_vidreg_unlock(wrptr); + + ufb->active_16 = true; + if (old_fb) { + struct udl_framebuffer *uold_fb = to_udl_fb(old_fb); + uold_fb->active_16 = false; + } + udl->mode_buf_len = wrptr - buf; + + /* damage all of it */ + udl_handle_damage(ufb, 0, 0, ufb->base.width, ufb->base.height); + return 0; +} + + +static void udl_crtc_disable(struct drm_crtc *crtc) +{ + + +} + +static void udl_crtc_destroy(struct drm_crtc *crtc) +{ + drm_crtc_cleanup(crtc); + kfree(crtc); +} + +static void udl_load_lut(struct drm_crtc *crtc) +{ +} + +static void udl_crtc_prepare(struct drm_crtc *crtc) +{ +} + +static void udl_crtc_commit(struct drm_crtc *crtc) +{ + udl_crtc_dpms(crtc, DRM_MODE_DPMS_ON); +} + +static struct drm_crtc_helper_funcs udl_helper_funcs = { + .dpms = udl_crtc_dpms, + .mode_fixup = udl_crtc_mode_fixup, + .mode_set = udl_crtc_mode_set, + .prepare = udl_crtc_prepare, + .commit = udl_crtc_commit, + .disable = udl_crtc_disable, + .load_lut = udl_load_lut, +}; + +static const struct drm_crtc_funcs udl_crtc_funcs = { + .set_config = drm_crtc_helper_set_config, + .destroy = udl_crtc_destroy, +}; + +int udl_crtc_init(struct drm_device *dev) +{ + struct drm_crtc *crtc; + + crtc = kzalloc(sizeof(struct drm_crtc) + sizeof(struct drm_connector *), GFP_KERNEL); + if (crtc == NULL) + return -ENOMEM; + + drm_crtc_init(dev, crtc, &udl_crtc_funcs); + drm_crtc_helper_add(crtc, &udl_helper_funcs); + + return 0; +} + +static const struct drm_mode_config_funcs udl_mode_funcs = { + .fb_create = udl_fb_user_fb_create, + .output_poll_changed = NULL, +}; + +int udl_modeset_init(struct drm_device *dev) +{ + struct drm_encoder *encoder; + drm_mode_config_init(dev); + + dev->mode_config.min_width = 640; + dev->mode_config.min_height = 480; + + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + + dev->mode_config.prefer_shadow = 0; + dev->mode_config.preferred_depth = 24; + + dev->mode_config.funcs = (void *)&udl_mode_funcs; + + drm_mode_create_dirty_info_property(dev); + + udl_crtc_init(dev); + + encoder = udl_encoder_init(dev); + + udl_connector_init(dev, encoder); + + return 0; +} + +void udl_modeset_cleanup(struct drm_device *dev) +{ + drm_mode_config_cleanup(dev); +} diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c new file mode 100644 index 00000000000..b9320e2608d --- /dev/null +++ b/drivers/gpu/drm/udl/udl_transfer.c @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2012 Red Hat + * based in parts on udlfb.c: + * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> + * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> + * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/prefetch.h> + +#include "drmP.h" +#include "udl_drv.h" + +#define MAX_CMD_PIXELS 255 + +#define RLX_HEADER_BYTES 7 +#define MIN_RLX_PIX_BYTES 4 +#define MIN_RLX_CMD_BYTES (RLX_HEADER_BYTES + MIN_RLX_PIX_BYTES) + +#define RLE_HEADER_BYTES 6 +#define MIN_RLE_PIX_BYTES 3 +#define MIN_RLE_CMD_BYTES (RLE_HEADER_BYTES + MIN_RLE_PIX_BYTES) + +#define RAW_HEADER_BYTES 6 +#define MIN_RAW_PIX_BYTES 2 +#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES) + +/* + * Trims identical data from front and back of line + * Sets new front buffer address and width + * And returns byte count of identical pixels + * Assumes CPU natural alignment (unsigned long) + * for back and front buffer ptrs and width + */ +#if 0 +static int udl_trim_hline(const u8 *bback, const u8 **bfront, int *width_bytes) +{ + int j, k; + const unsigned long *back = (const unsigned long *) bback; + const unsigned long *front = (const unsigned long *) *bfront; + const int width = *width_bytes / sizeof(unsigned long); + int identical = width; + int start = width; + int end = width; + + prefetch((void *) front); + prefetch((void *) back); + + for (j = 0; j < width; j++) { + if (back[j] != front[j]) { + start = j; + break; + } + } + + for (k = width - 1; k > j; k--) { + if (back[k] != front[k]) { + end = k+1; + break; + } + } + + identical = start + (width - end); + *bfront = (u8 *) &front[start]; + *width_bytes = (end - start) * sizeof(unsigned long); + + return identical * sizeof(unsigned long); +} +#endif + +static inline u16 pixel32_to_be16p(const uint8_t *pixel) +{ + uint32_t pix = *(uint32_t *)pixel; + u16 retval; + + retval = (((pix >> 3) & 0x001f) | + ((pix >> 5) & 0x07e0) | + ((pix >> 8) & 0xf800)); + return retval; +} + +/* + * Render a command stream for an encoded horizontal line segment of pixels. + * + * A command buffer holds several commands. + * It always begins with a fresh command header + * (the protocol doesn't require this, but we enforce it to allow + * multiple buffers to be potentially encoded and sent in parallel). + * A single command encodes one contiguous horizontal line of pixels + * + * The function relies on the client to do all allocation, so that + * rendering can be done directly to output buffers (e.g. USB URBs). + * The function fills the supplied command buffer, providing information + * on where it left off, so the client may call in again with additional + * buffers if the line will take several buffers to complete. + * + * A single command can transmit a maximum of 256 pixels, + * regardless of the compression ratio (protocol design limit). + * To the hardware, 0 for a size byte means 256 + * + * Rather than 256 pixel commands which are either rl or raw encoded, + * the rlx command simply assumes alternating raw and rl spans within one cmd. + * This has a slightly larger header overhead, but produces more even results. + * It also processes all data (read and write) in a single pass. + * Performance benchmarks of common cases show it having just slightly better + * compression than 256 pixel raw or rle commands, with similar CPU consumpion. + * But for very rl friendly data, will compress not quite as well. + */ +static void udl_compress_hline16( + const u8 **pixel_start_ptr, + const u8 *const pixel_end, + uint32_t *device_address_ptr, + uint8_t **command_buffer_ptr, + const uint8_t *const cmd_buffer_end, int bpp) +{ + const u8 *pixel = *pixel_start_ptr; + uint32_t dev_addr = *device_address_ptr; + uint8_t *cmd = *command_buffer_ptr; + + while ((pixel_end > pixel) && + (cmd_buffer_end - MIN_RLX_CMD_BYTES > cmd)) { + uint8_t *raw_pixels_count_byte = 0; + uint8_t *cmd_pixels_count_byte = 0; + const u8 *raw_pixel_start = 0; + const u8 *cmd_pixel_start, *cmd_pixel_end = 0; + + prefetchw((void *) cmd); /* pull in one cache line at least */ + + *cmd++ = 0xaf; + *cmd++ = 0x6b; + *cmd++ = (uint8_t) ((dev_addr >> 16) & 0xFF); + *cmd++ = (uint8_t) ((dev_addr >> 8) & 0xFF); + *cmd++ = (uint8_t) ((dev_addr) & 0xFF); + + cmd_pixels_count_byte = cmd++; /* we'll know this later */ + cmd_pixel_start = pixel; + + raw_pixels_count_byte = cmd++; /* we'll know this later */ + raw_pixel_start = pixel; + + cmd_pixel_end = pixel + (min(MAX_CMD_PIXELS + 1, + min((int)(pixel_end - pixel) / bpp, + (int)(cmd_buffer_end - cmd) / 2))) * bpp; + + prefetch_range((void *) pixel, (cmd_pixel_end - pixel) * bpp); + + while (pixel < cmd_pixel_end) { + const u8 * const repeating_pixel = pixel; + + if (bpp == 2) + *(uint16_t *)cmd = cpu_to_be16p((uint16_t *)pixel); + else if (bpp == 4) + *(uint16_t *)cmd = cpu_to_be16(pixel32_to_be16p(pixel)); + + cmd += 2; + pixel += bpp; + + if (unlikely((pixel < cmd_pixel_end) && + (!memcmp(pixel, repeating_pixel, bpp)))) { + /* go back and fill in raw pixel count */ + *raw_pixels_count_byte = (((repeating_pixel - + raw_pixel_start) / bpp) + 1) & 0xFF; + + while ((pixel < cmd_pixel_end) + && (!memcmp(pixel, repeating_pixel, bpp))) { + pixel += bpp; + } + + /* immediately after raw data is repeat byte */ + *cmd++ = (((pixel - repeating_pixel) / bpp) - 1) & 0xFF; + + /* Then start another raw pixel span */ + raw_pixel_start = pixel; + raw_pixels_count_byte = cmd++; + } + } + + if (pixel > raw_pixel_start) { + /* finalize last RAW span */ + *raw_pixels_count_byte = ((pixel-raw_pixel_start) / bpp) & 0xFF; + } + + *cmd_pixels_count_byte = ((pixel - cmd_pixel_start) / bpp) & 0xFF; + dev_addr += ((pixel - cmd_pixel_start) / bpp) * 2; + } + + if (cmd_buffer_end <= MIN_RLX_CMD_BYTES + cmd) { + /* Fill leftover bytes with no-ops */ + if (cmd_buffer_end > cmd) + memset(cmd, 0xAF, cmd_buffer_end - cmd); + cmd = (uint8_t *) cmd_buffer_end; + } + + *command_buffer_ptr = cmd; + *pixel_start_ptr = pixel; + *device_address_ptr = dev_addr; + + return; +} + +/* + * There are 3 copies of every pixel: The front buffer that the fbdev + * client renders to, the actual framebuffer across the USB bus in hardware + * (that we can only write to, slowly, and can never read), and (optionally) + * our shadow copy that tracks what's been sent to that hardware buffer. + */ +int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr, + const char *front, char **urb_buf_ptr, + u32 byte_offset, u32 byte_width, + int *ident_ptr, int *sent_ptr) +{ + const u8 *line_start, *line_end, *next_pixel; + u32 base16 = 0 + (byte_offset / bpp) * 2; + struct urb *urb = *urb_ptr; + u8 *cmd = *urb_buf_ptr; + u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length; + + line_start = (u8 *) (front + byte_offset); + next_pixel = line_start; + line_end = next_pixel + byte_width; + + while (next_pixel < line_end) { + + udl_compress_hline16(&next_pixel, + line_end, &base16, + (u8 **) &cmd, (u8 *) cmd_end, bpp); + + if (cmd >= cmd_end) { + int len = cmd - (u8 *) urb->transfer_buffer; + if (udl_submit_urb(dev, urb, len)) + return 1; /* lost pixels is set */ + *sent_ptr += len; + urb = udl_get_urb(dev); + if (!urb) + return 1; /* lost_pixels is set */ + *urb_ptr = urb; + cmd = urb->transfer_buffer; + cmd_end = &cmd[urb->transfer_buffer_length]; + } + } + + *urb_buf_ptr = cmd; + + return 0; +} + |