diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/davinci.txt | 28 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 48 |
2 files changed, 65 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/i2c/davinci.txt b/Documentation/devicetree/bindings/i2c/davinci.txt new file mode 100644 index 00000000000..2dc935b4113 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/davinci.txt @@ -0,0 +1,28 @@ +* Texas Instruments Davinci I2C + +This file provides information, what the device node for the +davinci i2c interface contain. + +Required properties: +- compatible: "ti,davinci-i2c"; +- reg : Offset and length of the register set for the device + +Recommended properties : +- interrupts : standard interrupt property. +- clock-frequency : desired I2C bus clock frequency in Hz. + +Example (enbw_cmc board): + i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + clock-frequency = <100000>; + interrupts = <15>; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + }; diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 79b4bcb3b85..b6185dccdf4 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -38,6 +38,8 @@ #include <linux/slab.h> #include <linux/cpufreq.h> #include <linux/gpio.h> +#include <linux/of_i2c.h> +#include <linux/of_device.h> #include <mach/hardware.h> #include <mach/i2c.h> @@ -114,6 +116,7 @@ struct davinci_i2c_dev { struct completion xfr_complete; struct notifier_block freq_transition; #endif + struct davinci_i2c_platform_data *pdata; }; /* default platform data to use if not supplied in the platform_device */ @@ -155,7 +158,7 @@ static void generic_i2c_clock_pulse(unsigned int scl_pin) static void i2c_recover_bus(struct davinci_i2c_dev *dev) { u32 flag = 0; - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; dev_err(dev->dev, "initiating i2c bus recovery\n"); /* Send NACK to the slave */ @@ -163,8 +166,7 @@ static void i2c_recover_bus(struct davinci_i2c_dev *dev) flag |= DAVINCI_I2C_MDR_NACK; /* write the data into mode register */ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); - if (pdata) - generic_i2c_clock_pulse(pdata->scl_pin); + generic_i2c_clock_pulse(pdata->scl_pin); /* Send STOP */ flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); flag |= DAVINCI_I2C_MDR_STP; @@ -187,7 +189,7 @@ static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; u16 psc; u32 clk; u32 d; @@ -235,10 +237,7 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) */ static int i2c_davinci_init(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; - - if (!pdata) - pdata = &davinci_i2c_platform_data_default; + struct davinci_i2c_platform_data *pdata = dev->pdata; /* put I2C into reset */ davinci_i2c_reset_ctrl(dev, 0); @@ -260,6 +259,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", pdata->bus_freq, pdata->bus_delay); + /* Take the I2C module out of reset: */ davinci_i2c_reset_ctrl(dev, 1); @@ -308,13 +308,11 @@ static int i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); - struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + struct davinci_i2c_platform_data *pdata = dev->pdata; u32 flag; u16 w; int r; - if (!pdata) - pdata = &davinci_i2c_platform_data_default; /* Introduce a delay, required for some boards (e.g Davinci EVM) */ if (pdata->bus_delay) udelay(pdata->bus_delay); @@ -635,6 +633,12 @@ static struct i2c_algorithm i2c_davinci_algo = { .functionality = i2c_davinci_func, }; +static const struct of_device_id davinci_i2c_of_match[] = { + {.compatible = "ti,davinci-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, davinci_i2c_of_match); + static int davinci_i2c_probe(struct platform_device *pdev) { struct davinci_i2c_dev *dev; @@ -674,8 +678,27 @@ static int davinci_i2c_probe(struct platform_device *pdev) #endif dev->dev = get_device(&pdev->dev); dev->irq = irq->start; + dev->pdata = dev->dev->platform_data; platform_set_drvdata(pdev, dev); + if (!dev->pdata && pdev->dev.of_node) { + u32 prop; + + dev->pdata = devm_kzalloc(&pdev->dev, + sizeof(struct davinci_i2c_platform_data), GFP_KERNEL); + if (!dev->pdata) { + r = -ENOMEM; + goto err_free_mem; + } + memcpy(dev->pdata, &davinci_i2c_platform_data_default, + sizeof(struct davinci_i2c_platform_data)); + if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &prop)) + dev->pdata->bus_freq = prop / 1000; + } else if (!dev->pdata) { + dev->pdata = &davinci_i2c_platform_data_default; + } + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { r = -ENODEV; @@ -711,6 +734,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) adap->algo = &i2c_davinci_algo; adap->dev.parent = &pdev->dev; adap->timeout = DAVINCI_I2C_TIMEOUT; + adap->dev.of_node = pdev->dev.of_node; adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); @@ -718,6 +742,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failure adding adapter\n"); goto err_free_irq; } + of_i2c_register_devices(adap); return 0; @@ -809,6 +834,7 @@ static struct platform_driver davinci_i2c_driver = { .name = "i2c_davinci", .owner = THIS_MODULE, .pm = davinci_i2c_pm_ops, + .of_match_table = of_match_ptr(davinci_i2c_of_match), }, }; |