diff options
| -rw-r--r-- | arch/mips/Kconfig | 10 | ||||
| -rw-r--r-- | arch/mips/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/kernel/cevt-r4k.c | 2 | ||||
| -rw-r--r-- | arch/mips/kernel/smp-mt.c | 4 | ||||
| -rw-r--r-- | arch/mips/mti-malta/malta-time.c | 10 | ||||
| -rw-r--r-- | drivers/irqchip/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/irqchip/Makefile | 1 | ||||
| -rw-r--r-- | drivers/irqchip/irq-mips-gic.c (renamed from arch/mips/kernel/irq-gic.c) | 0 |
8 files changed, 16 insertions, 16 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e08aeec7d91..e0b7c200690 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -320,7 +320,7 @@ config MIPS_MALTA select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM select IRQ_CPU - select IRQ_GIC + select MIPS_GIC select HW_HAS_PCI select I8253 select I8259 @@ -362,7 +362,7 @@ config MIPS_SEAD3 select CPU_MIPSR2_IRQ_EI select DMA_NONCOHERENT select IRQ_CPU - select IRQ_GIC + select MIPS_GIC select LIBFDT select MIPS_MSC select SYS_HAS_CPU_MIPS32_R1 @@ -1073,10 +1073,6 @@ config IRQ_TXX9 config IRQ_GT641XX bool -config IRQ_GIC - select MIPS_CM - bool - config PCI_GT64XXX_PCI0 bool @@ -1890,7 +1886,7 @@ config FORCE_MAX_ZONEORDER config CEVT_GIC bool "Use GIC global counter for clock events" - depends on IRQ_GIC && !MIPS_SEAD3 + depends on MIPS_GIC && !MIPS_SEAD3 help Use the GIC global counter for the clock events. The R4K clock event driver is always present, so if the platform ends up not diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 008a2fed058..3982e5138f6 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -68,7 +68,6 @@ obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_MIPS_MSC) += irq-msc01.o obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o -obj-$(CONFIG_IRQ_GIC) += irq-gic.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_32BIT) += scall32-o32.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index bc127e22fda..5b8f8e32b47 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -85,7 +85,7 @@ void mips_event_handler(struct clock_event_device *dev) */ static int c0_compare_int_pending(void) { -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (cpu_has_veic) return gic_get_timer_pending(); #endif diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 21f23add04f..d60475fe595 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -119,7 +119,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action) unsigned long flags; int vpflags; -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (gic_present) { gic_send_ipi_single(cpu, action); return; @@ -158,7 +158,7 @@ static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action) static void vsmp_init_secondary(void) { -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC /* This is Malta specific: IPI,performance and timer interrupts */ if (gic_present) change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index a4e035c8acf..17cfc8a379a 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -70,7 +70,7 @@ static void __init estimate_frequencies(void) { unsigned long flags; unsigned int count, start; -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC unsigned int giccount = 0, gicstart = 0; #endif @@ -87,7 +87,7 @@ static void __init estimate_frequencies(void) /* Initialize counters. */ start = read_c0_count(); -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (gic_present) GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart); #endif @@ -97,7 +97,7 @@ static void __init estimate_frequencies(void) while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); count = read_c0_count(); -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (gic_present) GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount); #endif @@ -107,7 +107,7 @@ static void __init estimate_frequencies(void) count -= start; mips_hpt_frequency = count; -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (gic_present) { giccount -= gicstart; gic_frequency = giccount; @@ -189,7 +189,7 @@ void __init plat_time_init(void) setup_pit_timer(); #endif -#ifdef CONFIG_IRQ_GIC +#ifdef CONFIG_MIPS_GIC if (gic_present) { freq = freqround(gic_frequency, 5000); printk("GIC frequency %d.%02d MHz\n", freq/1000000, diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index b21f12f1766..f2dde146bbd 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -125,3 +125,7 @@ config KEYSTONE_IRQ help Support for Texas Instruments Keystone 2 IRQ controller IP which is part of the Keystone 2 IPC mechanism + +config MIPS_GIC + bool + select MIPS_CM diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 173bb5fa2cc..021833079c9 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -38,3 +38,4 @@ obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o \ irq-bcm7120-l2.o obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o +obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o diff --git a/arch/mips/kernel/irq-gic.c b/drivers/irqchip/irq-mips-gic.c index 582883069ef..582883069ef 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/drivers/irqchip/irq-mips-gic.c |