diff options
| -rw-r--r-- | drivers/net/sundance.c | 62 |
1 files changed, 48 insertions, 14 deletions
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 5de0554fd7c..0ab9c38b4a3 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -80,7 +80,7 @@ I/O access could affect performance in ARM-based system - Add Linux software VLAN support - Version LK1.08 (D-Link): + Version LK1.08 (Philippe De Muyter phdm@macqel.be): - Fix bug of custom mac address (StationAddr register only accept word write) @@ -91,11 +91,14 @@ Version LK1.09a (ICPlus): - Add the delay time in reading the contents of EEPROM + Version LK1.10 (Philippe De Muyter phdm@macqel.be): + - Make 'unblock interface after Tx underrun' work + */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.09a" -#define DRV_RELDATE "10-Jul-2003" +#define DRV_VERSION "1.01+LK1.10" +#define DRV_RELDATE "28-Oct-2005" /* The user-configurable values. @@ -263,8 +266,10 @@ IV. Notes IVb. References The Sundance ST201 datasheet, preliminary version. -http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html -http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html +The Kendin KS8723 datasheet, preliminary version. +The ICplus IP100 datasheet, preliminary version. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html IVc. Errata @@ -500,6 +505,25 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int netdev_close(struct net_device *dev); static struct ethtool_ops ethtool_ops; +static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base + ASICCtrl; + int countdown; + + /* ST201 documentation states ASICCtrl is a 32bit register */ + iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); + /* ST201 documentation states reset can take up to 1 ms */ + countdown = 10 + 1; + while (ioread32 (ioaddr) & (ResetBusy << 16)) { + if (--countdown == 0) { + printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); + break; + } + udelay(100); + } +} + static int __devinit sundance_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1190,23 +1214,33 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs ("%s: Transmit status is %2.2x.\n", dev->name, tx_status); if (tx_status & 0x1e) { + if (netif_msg_tx_err(np)) + printk("%s: Transmit error status %4.4x.\n", + dev->name, tx_status); np->stats.tx_errors++; if (tx_status & 0x10) np->stats.tx_fifo_errors++; if (tx_status & 0x08) np->stats.collisions++; + if (tx_status & 0x04) + np->stats.tx_fifo_errors++; if (tx_status & 0x02) np->stats.tx_window_errors++; - /* This reset has not been verified!. */ - if (tx_status & 0x10) { /* Reset the Tx. */ - np->stats.tx_fifo_errors++; - spin_lock(&np->lock); - reset_tx(dev); - spin_unlock(&np->lock); + /* + ** This reset has been verified on + ** DFE-580TX boards ! phdm@macqel.be. + */ + if (tx_status & 0x10) { /* TxUnderrun */ + unsigned short txthreshold; + + txthreshold = ioread16 (ioaddr + TxStartThresh); + /* Restart Tx FIFO and transmitter */ + sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); + iowrite16 (txthreshold, ioaddr + TxStartThresh); + /* No need to reset the Tx pointer here */ } - if (tx_status & 0x1e) /* Restart the Tx. */ - iowrite16 (TxEnable, - ioaddr + MACCtrl1); + /* Restart the Tx. */ + iowrite16 (TxEnable, ioaddr + MACCtrl1); } /* Yup, this is a documentation bug. It cost me *hours*. */ iowrite16 (0, ioaddr + TxStatus); |