diff options
38 files changed, 2564 insertions, 329 deletions
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 336e51dc612..436eed22801 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -776,7 +776,7 @@ int __init omap1_clk_init(void) arm_idlect1_mask = ~0; for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); cpu_mask = 0; if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 9774c1f5311..5218943c91c 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -53,11 +53,12 @@ #include <mach/clock.h> #include <mach/sram.h> #include <mach/tc.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/dma.h> #include <mach/dmtimer.h> +#include "pm.h" + static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; @@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; * going idle we continue to do idle even if we get * a clock tick interrupt . . */ -void omap_pm_idle(void) +void omap1_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; @@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void) #define EN_APICK 6 /* ARM_IDLECT2 */ #define DSP_EN 1 /* ARM_RSTCT1 */ -void omap_pm_suspend(void) +void omap1_pm_suspend(void) { unsigned long arg0 = 0, arg1 = 0; @@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: - omap_pm_suspend(); + omap1_pm_suspend(); break; default: return -EINVAL; @@ -683,7 +684,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap_pm_idle; + pm_idle = omap1_pm_idle; if (cpu_is_omap730()) setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h index ce6ee792753..9ed5e2c1de4 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -1,7 +1,7 @@ /* - * arch/arm/plat-omap/include/mach/pm.h + * arch/arm/mach-omap1/pm.h * - * Header file for OMAP Power Management Routines + * Header file for OMAP1 Power Management Routines * * Author: MontaVista Software, Inc. * support@mvista.com @@ -31,8 +31,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_ARCH_OMAP_PM_H -#define __ASM_ARCH_OMAP_PM_H +#ifndef __ARCH_ARM_MACH_OMAP1_PM_H +#define __ARCH_ARM_MACH_OMAP1_PM_H /* * ---------------------------------------------------------------------------- @@ -106,8 +106,7 @@ #if !defined(CONFIG_ARCH_OMAP730) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) && \ - !defined(CONFIG_ARCH_OMAP24XX) + !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" #endif @@ -115,29 +114,27 @@ #include <linux/clk.h> +extern struct kset power_subsys; + extern void prevent_idle_sleep(void); extern void allow_idle_sleep(void); -extern void omap_pm_idle(void); -extern void omap_pm_suspend(void); +extern void omap1_pm_idle(void); +extern void omap1_pm_suspend(void); + extern void omap730_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, - void __iomem *sdrc_power); extern void omap730_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern void omap24xx_idle_loop_suspend(void); extern unsigned int omap730_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap24xx_cpu_suspend_sz; extern unsigned int omap730_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; #ifdef CONFIG_OMAP_SERIAL_WAKE extern void omap_serial_wake_trigger(int enable); @@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable); #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] -#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x -#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] -#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] - /* * List of global OMAP registers to preserve. * More ones like CP and general purpose register values are preserved @@ -283,63 +276,5 @@ enum mpui1610_save_state { #endif }; -enum omap24xx_save_state { - OMAP24XX_SLEEP_SAVE_START = 0, - OMAP24XX_SLEEP_SAVE_INTC_MIR0, - OMAP24XX_SLEEP_SAVE_INTC_MIR1, - OMAP24XX_SLEEP_SAVE_INTC_MIR2, - - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, - - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, - - OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, - OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_OE, - OMAP24XX_SLEEP_SAVE_GPIO4_OE, - OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, - OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, - OMAP24XX_SLEEP_SAVE_SIZE -}; - #endif /* ASSEMBLER */ #endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 842090b148f..f754cee4f3c 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -26,9 +26,6 @@ #include <mach/mux.h> #include <mach/gpio.h> #include <mach/fpga.h> -#ifdef CONFIG_PM -#include <mach/pm.h> -#endif static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index f3eac932092..22e8568339b 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -35,7 +35,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> +#include "pm.h" .text diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 09fb3ad5249..3a48f2fb0ca 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -25,8 +25,10 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) -obj-y += pm.o +obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif # Clock framework @@ -62,9 +64,7 @@ obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o # Platform specific device init code -ifeq ($(CONFIG_USB_MUSB_SOC),y) obj-y += usb-musb.o -endif onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index dd37483f3d1..ba528f85749 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel_rate *clkr; u32 last_div = 0; - printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n", - clk->name, target_rate); + pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", + clk->name, target_rate); *new_div = 1; @@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, /* Sanity check */ if (clkr->div <= last_div) - printk(KERN_ERR "clock: clksel_rate table not sorted " + pr_err("clock: clksel_rate table not sorted " "for clock %s", clk->name); last_div = clkr->div; @@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, } if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor for target " + pr_err("clock: Could not find divisor for target " "rate %ld for clock %s parent %s\n", target_rate, clk->name, clk->parent->name); return ~0; @@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, *new_div = clkr->div; - printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div, - (clk->parent->rate / clkr->div)); + pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, + (clk->parent->rate / clkr->div)); return (clk->parent->rate / clkr->div); } @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk); diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index c442fe9f998..44de0271fc2 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -725,7 +725,7 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ba05aa42bd8..9e43fe5209d 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), @@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = { #define MAX_DPLL_WAIT_TRIES 1000000 +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk @@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; + u32 unlock_dll = 0; unsigned long validrate, sdrcrate; struct omap_sdrc_params *sp; @@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!sp) return -EINVAL; - pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, - validrate); - pr_info("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { + pr_debug("clock: will unlock SDRC DLL\n"); + unlock_dll = 1; + } + + pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, + validrate); + pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", + sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); /* REVISIT: SRAM code doesn't support other M2 divisors yet */ WARN_ON(new_div != 1 && new_div != 2); /* REVISIT: Add SDRC_MR changing to this code also */ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div); + sp->actim_ctrlb, new_div, unlock_dll); return 0; } @@ -956,7 +967,7 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_init_one(c->lk.clk); + clk_preinit(c->lk.clk); for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) if (c->cpu & cpu_clkflg) { diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 496f0e9caeb..e433aec4efd 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1230,6 +1230,37 @@ static struct clk d2d_26m_fck = { .recalc = &followparent_recalc, }; +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + static const struct clksel omap343x_gpt_clksel[] = { { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, { .parent = &sys_ck, .rates = gpt_sys_rates }, @@ -1947,8 +1978,6 @@ static struct clk usb_l4_ick = { .recalc = &omap2_clksel_recalc, }; -/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */ - /* SECURITY_L4_ICK2 based clocks */ static struct clk security_l4_ick2 = { diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 281d5da1918..fe319ae4ca0 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = { static struct clockdomain d2d_clkdm = { .name = "d2d_clkdm", .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP_SWSUP, .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 6f3f5a36aae..6923deb98a2 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -145,6 +145,8 @@ #define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ +#define OMAP3430_EN_MODEM (1 << 31) +#define OMAP3430_EN_MODEM_SHIFT 31 /* CM_ICLKEN1_CORE specific bits */ #define OMAP3430_EN_ICR (1 << 29) @@ -161,6 +163,8 @@ #define OMAP3430_EN_MAILBOXES_SHIFT 7 #define OMAP3430_EN_OMAPCTRL (1 << 6) #define OMAP3430_EN_OMAPCTRL_SHIFT 6 +#define OMAP3430_EN_SAD2D (1 << 3) +#define OMAP3430_EN_SAD2D_SHIFT 3 #define OMAP3430_EN_SDRC (1 << 1) #define OMAP3430_EN_SDRC_SHIFT 1 @@ -176,6 +180,10 @@ #define OMAP3430_EN_DES1 (1 << 0) #define OMAP3430_EN_DES1_SHIFT 0 +/* CM_ICLKEN3_CORE */ +#define OMAP3430_EN_MAD2D_SHIFT 3 +#define OMAP3430_EN_MAD2D (1 << 3) + /* CM_FCLKEN3_CORE specific bits */ #define OMAP3430ES2_EN_TS_SHIFT 1 #define OMAP3430ES2_EN_TS_MASK (1 << 1) @@ -231,6 +239,8 @@ #define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ +#define OMAP3430_AUTO_MODEM (1 << 31) +#define OMAP3430_AUTO_MODEM_SHIFT 31 #define OMAP3430ES2_AUTO_MMC3 (1 << 30) #define OMAP3430ES2_AUTO_MMC3_SHIFT 30 #define OMAP3430ES2_AUTO_ICR (1 << 29) @@ -287,6 +297,8 @@ #define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 #define OMAP3430ES1_AUTO_D2D (1 << 3) #define OMAP3430ES1_AUTO_D2D_SHIFT 3 +#define OMAP3430_AUTO_SAD2D (1 << 3) +#define OMAP3430_AUTO_SAD2D_SHIFT 3 #define OMAP3430_AUTO_SSI (1 << 0) #define OMAP3430_AUTO_SSI_SHIFT 0 @@ -308,6 +320,8 @@ #define OMAP3430ES2_AUTO_USBTLL (1 << 2) #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) +#define OMAP3430_AUTO_MAD2D_SHIFT 3 +#define OMAP3430_AUTO_MAD2D (1 << 3) /* CM_CLKSEL_CORE */ #define OMAP3430_CLKSEL_SSI_SHIFT 8 diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 998c5c45587..b82863887f1 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -28,7 +28,6 @@ #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 - /* Number of IRQ state bits in each MIR register */ #define IRQ_BITS_PER_REG 32 @@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, - .disable = omap_mask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) @@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG); } +int omap_irq_pending(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + struct omap_irq_bank *bank = irq_banks + i; + int irq; + + for (irq = 0; irq < bank->nr_irqs; irq += 32) + if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 + + ((irq >> 5) << 5))) + return 1; + } + return 0; +} + void __init omap_init_irq(void) { unsigned long nr_of_irqs = 0; diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c new file mode 100644 index 00000000000..6cc375a275b --- /dev/null +++ b/arch/arm/mach-omap2/pm-debug.c @@ -0,0 +1,152 @@ +/* + * OMAP Power Management debug routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * Jouni Hogander + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/clock.h> +#include <mach/board.h> + +#include "prm.h" +#include "cm.h" +#include "pm.h" + +int omap2_pm_debug; + +#define DUMP_PRM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = prm_read_mod_reg(mod, reg) +#define DUMP_CM_MOD_REG(mod, reg) \ + regs[reg_count].name = #mod "." #reg; \ + regs[reg_count++].val = cm_read_mod_reg(mod, reg) +#define DUMP_PRM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_CM_REG(reg) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(reg) +#define DUMP_INTC_REG(reg, off) \ + regs[reg_count].name = #reg; \ + regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off))) + +void omap2_pm_dump(int mode, int resume, unsigned int us) +{ + struct reg { + const char *name; + u32 val; + } regs[32]; + int reg_count = 0, i; + const char *s1 = NULL, *s2 = NULL; + + if (!resume) { +#if 0 + /* MPU */ + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); + DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST); + DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); +#endif +#if 0 + /* INTC */ + DUMP_INTC_REG(INTC_MIR0, 0x0084); + DUMP_INTC_REG(INTC_MIR1, 0x00a4); + DUMP_INTC_REG(INTC_MIR2, 0x00c4); +#endif +#if 0 + DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); + DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSRC_CTRL_OFFSET); + } + DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); + DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); + DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); + DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); + DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST); +#endif +#if 0 + /* DSP */ + if (cpu_is_omap24xx()) { + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); + DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL); + DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST); + } +#endif + } else { + DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); + if (cpu_is_omap24xx()) + DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); + DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); + DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +#if 1 + DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); + DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); + DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); +#endif + } + + switch (mode) { + case 0: + s1 = "full"; + s2 = "retention"; + break; + case 1: + s1 = "MPU"; + s2 = "retention"; + break; + case 2: + s1 = "MPU"; + s2 = "idle"; + break; + } + + if (!resume) +#ifdef CONFIG_NO_HZ + printk(KERN_INFO + "--- Going to %s %s (next timer after %u ms)\n", s1, s2, + jiffies_to_msecs(get_next_timer_interrupt(jiffies) - + jiffies)); +#else + printk(KERN_INFO "--- Going to %s %s\n", s1, s2); +#endif + else + printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", + us / 1000, us % 1000); + + for (i = 0; i < reg_count; i++) + printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); +} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c deleted file mode 100644 index ea8ceaed09c..00000000000 --- a/arch/arm/mach-omap2/pm.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm.c - * - * OMAP2 Power Management Routines - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * Based on pm.c for omap1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/suspend.h> -#include <linux/sched.h> -#include <linux/proc_fs.h> -#include <linux/interrupt.h> -#include <linux/sysfs.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/atomic.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/pm.h> - -static struct clk *vclk; -static void (*omap2_sram_idle)(void); -static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); -static void (*saved_idle)(void); - -extern void __init pmdomain_init(void); -extern void pmdomain_set_autoidle(void); - -static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE]; - -void omap2_pm_idle(void) -{ - local_irq_disable(); - local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } - - omap2_sram_idle(); - local_fiq_enable(); - local_irq_enable(); -} - -static int omap2_pm_prepare(void) -{ - /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; - return 0; -} - -static int omap2_pm_suspend(void) -{ - return 0; -} - -static int omap2_pm_enter(suspend_state_t state) -{ - int ret = 0; - - switch (state) - { - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - ret = omap2_pm_suspend(); - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static void omap2_pm_finish(void) -{ - pm_idle = saved_idle; -} - -static struct platform_suspend_ops omap_pm_ops = { - .prepare = omap2_pm_prepare, - .enter = omap2_pm_enter, - .finish = omap2_pm_finish, - .valid = suspend_valid_only_mem, -}; - -static int __init omap2_pm_init(void) -{ - return 0; -} - -__initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h new file mode 100644 index 00000000000..f7b3baf7667 --- /dev/null +++ b/arch/arm/mach-omap2/pm.h @@ -0,0 +1,38 @@ +/* + * OMAP2/3 Power Management Routines + * + * Copyright (C) 2008 Nokia Corporation + * Jouni Hogander + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_PM_H +#define __ARCH_ARM_MACH_OMAP2_PM_H + +extern int omap2_pm_init(void); +extern int omap3_pm_init(void); + +#ifdef CONFIG_PM_DEBUG +extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern int omap2_pm_debug; +#else +#define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_debug 0 +#endif /* CONFIG_PM_DEBUG */ + +extern void omap24xx_idle_loop_suspend(void); + +extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); +extern void omap34xx_cpu_suspend(u32 *addr, int save_state); +extern void save_secure_ram_context(u32 *addr); + +extern unsigned int omap24xx_idle_loop_suspend_sz; +extern unsigned int omap34xx_suspend_sz; +extern unsigned int save_secure_ram_context_sz; +extern unsigned int omap24xx_cpu_suspend_sz; +extern unsigned int omap34xx_cpu_suspend_sz; + +#endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c new file mode 100644 index 00000000000..db1025562fb --- /dev/null +++ b/arch/arm/mach-omap2/pm24xx.c @@ -0,0 +1,549 @@ +/* + * OMAP2 Power Management Routines + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Copyright (C) 2006-2008 Nokia Corporation + * + * Written by: + * Richard Woodruff <r-woodruff2@ti.com> + * Tony Lindgren + * Juha Yrjola + * Amit Kucheria <amit.kucheria@nokia.com> + * Igor Stoppa <igor.stoppa@nokia.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/suspend.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/time.h> +#include <linux/gpio.h> + +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/clock.h> +#include <mach/sram.h> +#include <mach/control.h> +#include <mach/mux.h> +#include <mach/dma.h> +#include <mach/board.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" +#include "sdrc.h" +#include "pm.h" + +#include <mach/powerdomain.h> +#include <mach/clockdomain.h> + +static void (*omap2_sram_idle)(void); +static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, + void __iomem *sdrc_power); + +static struct powerdomain *mpu_pwrdm; +static struct powerdomain *core_pwrdm; + +static struct clockdomain *dsp_clkdm; +static struct clockdomain *gfx_clkdm; + +static struct clk *osc_ck, *emul_ck; + +static int omap2_fclks_active(void) +{ + u32 f1, f2; + + f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2); + f2 &= ~OMAP24XX_EN_UART3; + + if (f1 | f2) + return 1; + return 0; +} + +static void omap2_enter_full_retention(void) +{ + u32 l; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* There is 1 reference hold for all children of the oscillator + * clock, the following will remove it. If no one else uses the + * oscillator itself it will be disabled if/when we enter retention + * mode. + */ + clk_disable(osc_ck); + + /* Clear old wake-up events */ + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Workaround to kill USB */ + l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; + omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); + + omap2_gpio_prepare_for_retention(); + + if (omap2_pm_debug) { + omap2_pm_dump(0, 0, 0); + getnstimeofday(&ts_preidle); + } + + /* One last check for pending IRQs to avoid extra latency due + * to sleeping unnecessarily. */ + if (omap_irq_pending()) + goto no_sleep; + + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + /* Jump to SRAM suspend code */ + omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL), + OMAP_SDRC_REGADDR(SDRC_POWER)); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + +no_sleep: + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(0, 1, tmp); + } + omap2_gpio_resume_after_retention(); + + clk_enable(osc_ck); + + /* clear CORE wake-up events */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + + /* wakeup domain events - bit 1: GPT1, bit5 GPIO */ + prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST); + + /* MPU domain wake events */ + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x01) + prm_write_mod_reg(0x01, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + if (l & 0x20) + prm_write_mod_reg(0x20, OCP_MOD, + OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); + + /* Mask future PRCM-to-MPU interrupts */ + prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); +} + +static int omap2_i2c_active(void) +{ + u32 l; + + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1); +} + +static int sti_console_enabled; + +static int omap2_allow_mpu_retention(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 | + OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 | + OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1)) + return 0; + /* Check for UART3. */ + l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3) + return 0; + if (sti_console_enabled) + return 0; + + return 1; +} + +static void omap2_enter_mpu_retention(void) +{ + int only_idle = 0; + struct timespec ts_preidle, ts_postidle, ts_idle; + + /* Putting MPU into the WFI state while a transfer is active + * seems to cause the I2C block to timeout. Why? Good question. */ + if (omap2_i2c_active()) + return; + + /* The peripherals seem not to be able to wake up the MPU when + * it is in retention mode. */ + if (omap2_allow_mpu_retention()) { + /* REVISIT: These write to reserved bits? */ + prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1); + prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); + prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); + + /* Try to enter MPU retention */ + prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | + OMAP_LOGICRETSTATE, + MPU_MOD, PM_PWSTCTRL); + } else { + /* Block MPU retention */ + + prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL); + only_idle = 1; + } + + if (omap2_pm_debug) { + omap2_pm_dump(only_idle ? 2 : 1, 0, 0); + getnstimeofday(&ts_preidle); + } + + omap2_sram_idle(); + + if (omap2_pm_debug) { + unsigned long long tmp; + + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; + omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); + } +} + +static int omap2_can_sleep(void) +{ + if (omap2_fclks_active()) + return 0; + if (osc_ck->usecount > 1) + return 0; + if (omap_dma_running()) + return 0; + + return 1; +} + +static void omap2_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap2_can_sleep()) { + if (omap_irq_pending()) + goto out; + omap2_enter_mpu_retention(); + goto out; + } + + if (omap_irq_pending()) + goto out; + + omap2_enter_full_retention(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap2_pm_prepare(void) +{ + /* We cannot sleep in idle until we have resumed */ + disable_hlt(); + return 0; +} + +static int omap2_pm_suspend(void) +{ + u32 wken_wkup, mir1; + + wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN); + + /* Mask GPT1 */ + mir1 = omap_readl(0x480fe0a4); + omap_writel(1 << 5, 0x480fe0ac); + + omap_uart_prepare_suspend(); + omap2_enter_full_retention(); + + omap_writel(mir1, 0x480fe0a4); + prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); + + return 0; +} + +static int omap2_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap2_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap2_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap2_pm_prepare, + .enter = omap2_pm_enter, + .finish = omap2_pm_finish, + .valid = suspend_valid_only_mem, +}; + +static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static void __init prcm_setup_regs(void) +{ + int i, num_mem_banks; + struct powerdomain *pwrdm; + + /* Enable autoidle */ + prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD, + OMAP2_PRCM_SYSCONFIG_OFFSET); + + /* Set all domain wakeup dependencies */ + prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP); + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + prm_write_mod_reg(0, CORE_MOD, PM_WKDEP); + if (cpu_is_omap2430()) + prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP); + + /* + * Set CORE powerdomain memory banks to retain their contents + * during RETENTION + */ + num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm); + for (i = 0; i < num_mem_banks; i++) + pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET); + + /* Set CORE powerdomain's next power state to RETENTION */ + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); + + /* + * Set MPU powerdomain's next power state to RETENTION; + * preserve logic state during retention + */ + pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + + /* Force-power down DSP, GFX powerdomains */ + + pwrdm = clkdm_get_pwrdm(dsp_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(dsp_clkdm); + + pwrdm = clkdm_get_pwrdm(gfx_clkdm); + pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); + omap2_clkdm_sleep(gfx_clkdm); + + /* Enable clockdomain hardware-supervised control for all clkdms */ + clkdm_for_each(_pm_clkdm_enable_hwsup); + + /* Enable clock autoidle for all domains */ + cm_write_mod_reg(OMAP24XX_AUTO_CAM | + OMAP24XX_AUTO_MAILBOXES | + OMAP24XX_AUTO_WDT4 | + OMAP2420_AUTO_WDT3 | + OMAP24XX_AUTO_MSPRO | + OMAP2420_AUTO_MMC | + OMAP24XX_AUTO_FAC | + OMAP2420_AUTO_EAC | + OMAP24XX_AUTO_HDQ | + OMAP24XX_AUTO_UART2 | + OMAP24XX_AUTO_UART1 | + OMAP24XX_AUTO_I2C2 | + OMAP24XX_AUTO_I2C1 | + OMAP24XX_AUTO_MCSPI2 | + OMAP24XX_AUTO_MCSPI1 | + OMAP24XX_AUTO_MCBSP2 | + OMAP24XX_AUTO_MCBSP1 | + OMAP24XX_AUTO_GPT12 | + OMAP24XX_AUTO_GPT11 | + OMAP24XX_AUTO_GPT10 | + OMAP24XX_AUTO_GPT9 | + OMAP24XX_AUTO_GPT8 | + OMAP24XX_AUTO_GPT7 | + OMAP24XX_AUTO_GPT6 | + OMAP24XX_AUTO_GPT5 | + OMAP24XX_AUTO_GPT4 | + OMAP24XX_AUTO_GPT3 | + OMAP24XX_AUTO_GPT2 | + OMAP2420_AUTO_VLYNQ | + OMAP24XX_AUTO_DSS, + CORE_MOD, CM_AUTOIDLE1); + cm_write_mod_reg(OMAP24XX_AUTO_UART3 | + OMAP24XX_AUTO_SSI | + OMAP24XX_AUTO_USB, + CORE_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(OMAP24XX_AUTO_SDRC | + OMAP24XX_AUTO_GPMC | + OMAP24XX_AUTO_SDMA, + CORE_MOD, CM_AUTOIDLE3); + cm_write_mod_reg(OMAP24XX_AUTO_PKA | + OMAP24XX_AUTO_AES | + OMAP24XX_AUTO_RNG | + OMAP24XX_AUTO_SHA | + OMAP24XX_AUTO_DES, + CORE_MOD, OMAP24XX_CM_AUTOIDLE4); + + cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE); + + /* Put DPLL and both APLLs into autoidle mode */ + cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) | + (0x03 << OMAP24XX_AUTO_96M_SHIFT) | + (0x03 << OMAP24XX_AUTO_54M_SHIFT), + PLL_MOD, CM_AUTOIDLE); + + cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL | + OMAP24XX_AUTO_WDT1 | + OMAP24XX_AUTO_MPU_WDT | + OMAP24XX_AUTO_GPIOS | + OMAP24XX_AUTO_32KSYNC | + OMAP24XX_AUTO_GPT1, + WKUP_MOD, CM_AUTOIDLE); + + /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk + * stabilisation */ + prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_CLKSSETUP_OFFSET); + + /* Configure automatic voltage transition */ + prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, + OMAP2_PRCM_VOLTSETUP_OFFSET); + prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT | + (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) | + OMAP24XX_MEMRETCTRL | + (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) | + (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT), + OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET); + + /* Enable wake-up events */ + prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1, + WKUP_MOD, PM_WKEN); +} + +int __init omap2_pm_init(void) +{ + u32 l; + + if (!cpu_is_omap24xx()) + return -ENODEV; + + printk(KERN_INFO "Power Management for OMAP2 initializing\n"); + l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET); + printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); + + /* Look up important powerdomains, clockdomains */ + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (!mpu_pwrdm) + pr_err("PM: mpu_pwrdm not found\n"); + + core_pwrdm = pwrdm_lookup("core_pwrdm"); + if (!core_pwrdm) + pr_err("PM: core_pwrdm not found\n"); + + dsp_clkdm = clkdm_lookup("dsp_clkdm"); + if (!dsp_clkdm) + pr_err("PM: mpu_clkdm not found\n"); + + gfx_clkdm = clkdm_lookup("gfx_clkdm"); + if (!gfx_clkdm) + pr_err("PM: gfx_clkdm not found\n"); + + + osc_ck = clk_get(NULL, "osc_ck"); + if (IS_ERR(osc_ck)) { + printk(KERN_ERR "could not get osc_ck\n"); + return -ENODEV; + } + + if (cpu_is_omap242x()) { + emul_ck = clk_get(NULL, "emul_ck"); + if (IS_ERR(emul_ck)) { + printk(KERN_ERR "could not get emul_ck\n"); + clk_put(osc_ck); + return -ENODEV; + } + } + + prcm_setup_regs(); + + /* Hack to prevent MPU retention when STI console is enabled. */ + { + const struct omap_sti_console_config *sti; + + sti = omap_get_config(OMAP_TAG_STI_CONSOLE, + struct omap_sti_console_config); + if (sti != NULL && sti->enable) + sti_console_enabled = 1; + } + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + if (cpu_is_omap24xx()) { + omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, + omap24xx_idle_loop_suspend_sz); + + omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, + omap24xx_cpu_suspend_sz); + } + + suspend_set_ops(&omap_pm_ops); + pm_idle = omap2_pm_idle; + + return 0; +} + +late_initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c new file mode 100644 index 00000000000..841d4c5ed8b --- /dev/null +++ b/arch/arm/mach-omap2/pm34xx.c @@ -0,0 +1,710 @@ +/* + * OMAP3 Power Management Routines + * + * Copyright (C) 2006-2008 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Jouni Hogander + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/gpio.h> + +#include <mach/sram.h> +#include <mach/clockdomain.h> +#include <mach/powerdomain.h> +#include <mach/control.h> +#include <mach/serial.h> + +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" + +#include "prm.h" +#include "pm.h" + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; + u32 saved_state; + struct list_head node; +}; + +static LIST_HEAD(pwrst_list); + +static void (*_omap_sram_idle)(u32 *addr, int save_state); + +static struct powerdomain *mpu_pwrdm; + +/* PRCM Interrupt Handler for wakeups */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 wkst, irqstatus_mpu; + u32 fclk, iclk; + + /* WKUP */ + wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); + while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + } + + /* CORE */ + wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); + prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); + while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); + } + wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); + if (wkst) { + iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); + cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); + while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) + cpu_relax(); + cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + } + + /* PER */ + wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); + while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); + } + + if (omap_rev() > OMAP3430_REV_ES1_0) { + /* USBHOST */ + wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); + if (wkst) { + iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, + PM_WKST); + while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + PM_WKST)) + cpu_relax(); + cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, + CM_ICLKEN); + cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } + } + + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) + cpu_relax(); + + return IRQ_HANDLED; +} + +static void omap_sram_idle(void) +{ + /* Variable to tell what needs to be saved and restored + * in omap_sram_idle*/ + /* save_state = 0 => Nothing to save and restored */ + /* save_state = 1 => Only L1 and logic lost */ + /* save_state = 2 => Only L2 lost */ + /* save_state = 3 => L1, L2 and logic lost */ + int save_state = 0, mpu_next_state; + + if (!_omap_sram_idle) + return; + + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); + switch (mpu_next_state) { + case PWRDM_POWER_RET: + /* No need to save context */ + save_state = 0; + break; + default: + /* Invalid state */ + printk(KERN_ERR "Invalid mpu state in sram_idle\n"); + return; + } + omap2_gpio_prepare_for_retention(); + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + omap_uart_prepare_idle(2); + + _omap_sram_idle(NULL, save_state); + cpu_init(); + + omap_uart_resume_idle(2); + omap_uart_resume_idle(1); + omap_uart_resume_idle(0); + omap2_gpio_resume_after_retention(); +} + +/* + * Check if functional clocks are enabled before entering + * sleep. This function could be behind CONFIG_PM_DEBUG + * when all drivers are configuring their sysconfig registers + * properly and using their clocks properly. + */ +static int omap3_fclks_active(void) +{ + u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, + fck_cam = 0, fck_per = 0, fck_usbhost = 0; + + fck_core1 = cm_read_mod_reg(CORE_MOD, + CM_FCLKEN1); + if (omap_rev() > OMAP3430_REV_ES1_0) { + fck_core3 = cm_read_mod_reg(CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, + CM_FCLKEN); + } else + fck_sgx = cm_read_mod_reg(GFX_MOD, + OMAP3430ES2_CM_FCLKEN3); + fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, + CM_FCLKEN); + fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, + CM_FCLKEN); + fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, + CM_FCLKEN); + + /* Ignore UART clocks. These are handled by UART core (serial.c) */ + fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); + fck_per &= ~OMAP3430_EN_UART3; + + if (fck_core1 | fck_core3 | fck_sgx | fck_dss | + fck_cam | fck_per | fck_usbhost) + return 1; + return 0; +} + +static int omap3_can_sleep(void) +{ + if (!omap_uart_can_sleep()) + return 0; + if (omap3_fclks_active()) + return 0; + return 1; +} + +/* This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. */ +static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + } + +err: + return ret; +} + +static void omap3_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + + if (!omap3_can_sleep()) + goto out; + + if (omap_irq_pending()) + goto out; + + omap_sram_idle(); + +out: + local_fiq_enable(); + local_irq_enable(); +} + +static int omap3_pm_prepare(void) +{ + disable_hlt(); + return 0; +} + +static int omap3_pm_suspend(void) +{ + struct power_state *pwrst; + int state, ret = 0; + + /* Read current next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + /* Set ones wanted by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + goto restore; + if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) + goto restore; + } + + omap_uart_prepare_suspend(); + omap_sram_idle(); + +restore: + /* Restore next_pwrsts */ + list_for_each_entry(pwrst, &pwrst_list, node) { + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + printk(KERN_INFO "Powerdomain (%s) didn't enter " + "target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + } + if (ret) + printk(KERN_ERR "Could not enter target state in pm_suspend\n"); + else + printk(KERN_INFO "Successfully put all powerdomains " + "to target state\n"); + + return ret; +} + +static int omap3_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap3_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap3_pm_finish(void) +{ + enable_hlt(); +} + +static struct platform_suspend_ops omap_pm_ops = { + .prepare = omap3_pm_prepare, + .enter = omap3_pm_enter, + .finish = omap3_pm_finish, + .valid = suspend_valid_only_mem, +}; + + +/** + * omap3_iva_idle(): ensure IVA is in idle so it can be put into + * retention + * + * In cases where IVA2 is activated by bootcode, it may prevent + * full-chip retention or off-mode because it is not idle. This + * function forces the IVA2 into idle state so it can go + * into retention/off and thus allow full-chip retention/off. + * + **/ +static void __init omap3_iva_idle(void) +{ + /* ensure IVA2 clock is disabled */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* if no clock activity, nothing else to do */ + if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) & + OMAP3430_CLKACTIVITY_IVA2_MASK)) + return; + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Enable IVA2 clock */ + cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2, + OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Set IVA2 boot mode to 'idle' */ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); + + /* Un-reset IVA2 */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL); + + /* Disable IVA2 clock */ + cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); + + /* Reset IVA2 */ + prm_write_mod_reg(OMAP3430_RST1_IVA2 | + OMAP3430_RST2_IVA2 | + OMAP3430_RST3_IVA2, + OMAP3430_IVA2_MOD, RM_RSTCTRL); +} + +static void __init omap3_d2d_idle(void) +{ + u16 mask, padconf; + + /* In a stand alone OMAP3430 where there is not a stacked + * modem for the D2D Idle Ack and D2D MStandby must be pulled + * high. S CONTROL_PADCONF_SAD2D_IDLEACK and + * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ + mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); + + padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); + padconf |= mask; + omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); + + /* reset modem */ + prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, + CORE_MOD, RM_RSTCTRL); + prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL); +} + +static void __init prcm_setup_regs(void) +{ + /* XXX Reset all wkdeps. This should be done when initializing + * powerdomains */ + prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); + prm_write_mod_reg(0, MPU_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP); + if (omap_rev() > OMAP3430_REV_ES1_0) { + prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP); + prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + } else + prm_write_mod_reg(0, GFX_MOD, PM_WKDEP); + + /* + * Enable interface clock autoidle for all modules. + * Note that in the long run this should be done by clockfw + */ + cm_write_mod_reg( + OMAP3430_AUTO_MODEM | + OMAP3430ES2_AUTO_MMC3 | + OMAP3430ES2_AUTO_ICR | + OMAP3430_AUTO_AES2 | + OMAP3430_AUTO_SHA12 | + OMAP3430_AUTO_DES2 | + OMAP3430_AUTO_MMC2 | + OMAP3430_AUTO_MMC1 | + OMAP3430_AUTO_MSPRO | + OMAP3430_AUTO_HDQ | + OMAP3430_AUTO_MCSPI4 | + OMAP3430_AUTO_MCSPI3 | + OMAP3430_AUTO_MCSPI2 | + OMAP3430_AUTO_MCSPI1 | + OMAP3430_AUTO_I2C3 | + OMAP3430_AUTO_I2C2 | + OMAP3430_AUTO_I2C1 | + OMAP3430_AUTO_UART2 | + OMAP3430_AUTO_UART1 | + OMAP3430_AUTO_GPT11 | + OMAP3430_AUTO_GPT10 | + OMAP3430_AUTO_MCBSP5 | + OMAP3430_AUTO_MCBSP1 | + OMAP3430ES1_AUTO_FAC | /* This is es1 only */ + OMAP3430_AUTO_MAILBOXES | + OMAP3430_AUTO_OMAPCTRL | + OMAP3430ES1_AUTO_FSHOSTUSB | + OMAP3430_AUTO_HSOTGUSB | + OMAP3430_AUTO_SAD2D | + OMAP3430_AUTO_SSI, + CORE_MOD, CM_AUTOIDLE1); + + cm_write_mod_reg( + OMAP3430_AUTO_PKA | + OMAP3430_AUTO_AES1 | + OMAP3430_AUTO_RNG | + OMAP3430_AUTO_SHA11 | + OMAP3430_AUTO_DES1, + CORE_MOD, CM_AUTOIDLE2); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430_AUTO_MAD2D | + OMAP3430ES2_AUTO_USBTLL, + CORE_MOD, CM_AUTOIDLE3); + } + + cm_write_mod_reg( + OMAP3430_AUTO_WDT2 | + OMAP3430_AUTO_WDT1 | + OMAP3430_AUTO_GPIO1 | + OMAP3430_AUTO_32KSYNC | + OMAP3430_AUTO_GPT12 | + OMAP3430_AUTO_GPT1 , + WKUP_MOD, CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_DSS, + OMAP3430_DSS_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_CAM, + OMAP3430_CAM_MOD, + CM_AUTOIDLE); + + cm_write_mod_reg( + OMAP3430_AUTO_GPIO6 | + OMAP3430_AUTO_GPIO5 | + OMAP3430_AUTO_GPIO4 | + OMAP3430_AUTO_GPIO3 | + OMAP3430_AUTO_GPIO2 | + OMAP3430_AUTO_WDT3 | + OMAP3430_AUTO_UART3 | + OMAP3430_AUTO_GPT9 | + OMAP3430_AUTO_GPT8 | + OMAP3430_AUTO_GPT7 | + OMAP3430_AUTO_GPT6 | + OMAP3430_AUTO_GPT5 | + OMAP3430_AUTO_GPT4 | + OMAP3430_AUTO_GPT3 | + OMAP3430_AUTO_GPT2 | + OMAP3430_AUTO_MCBSP4 | + OMAP3430_AUTO_MCBSP3 | + OMAP3430_AUTO_MCBSP2, + OMAP3430_PER_MOD, + CM_AUTOIDLE); + + if (omap_rev() > OMAP3430_REV_ES1_0) { + cm_write_mod_reg( + OMAP3430ES2_AUTO_USBHOST, + OMAP3430ES2_USBHOST_MOD, + CM_AUTOIDLE); + } + + /* + * Set all plls to autoidle. This is needed until autoidle is + * enabled by clockfw + */ + cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT, + OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT, + MPU_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) | + (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT), + PLL_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT, + PLL_MOD, + CM_AUTOIDLE2); + + /* + * Enable control of expternal oscillator through + * sys_clkreq. In the long run clock framework should + * take care of this. + */ + prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, + 1 << OMAP_AUTOEXTCLKMODE_SHIFT, + OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + + /* setup wakup source */ + prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | + OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, + WKUP_MOD, PM_WKEN); + /* No need to write EN_IO, that is always enabled */ + prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | + OMAP3430_EN_GPT12, + WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + /* For some reason IO doesn't generate wakeup event even if + * it is selected to mpu wakeup goup */ + prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, + OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + omap3_iva_idle(); + omap3_d2d_idle(); +} + +static int __init pwrdms_setup(struct powerdomain *pwrdm) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL); + if (!pwrst) + return -ENOMEM; + pwrst->pwrdm = pwrdm; + pwrst->next_state = PWRDM_POWER_RET; + list_add(&pwrst->node, &pwrst_list); + + if (pwrdm_has_hdwr_sar(pwrdm)) + pwrdm_enable_hdwr_sar(pwrdm); + + return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/* + * Enable hw supervised mode for all clockdomains if it's + * supported. Initiate sleep transition for other clockdomains, if + * they are not used + */ +static int __init clkdms_setup(struct clockdomain *clkdm) +{ + if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) + omap2_clkdm_allow_idle(clkdm); + else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && + atomic_read(&clkdm->usecount) == 0) + omap2_clkdm_sleep(clkdm); + return 0; +} + +int __init omap3_pm_init(void) +{ + struct power_state *pwrst, *tmp; + int ret; + + if (!cpu_is_omap34xx()) + return -ENODEV; + + printk(KERN_ERR "Power Management for TI OMAP3.\n"); + + /* XXX prcm_setup_regs needs to be before enabling hw + * supervised mode for powerdomains */ + prcm_setup_regs(); + + ret = request_irq(INT_34XX_PRCM_MPU_IRQ, + (irq_handler_t)prcm_interrupt_handler, + IRQF_DISABLED, "prcm", NULL); + if (ret) { + printk(KERN_ERR "request_irq failed to register for 0x%x\n", + INT_34XX_PRCM_MPU_IRQ); + goto err1; + } + + ret = pwrdm_for_each(pwrdms_setup); + if (ret) { + printk(KERN_ERR "Failed to setup powerdomains\n"); + goto err2; + } + + (void) clkdm_for_each(clkdms_setup); + + mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); + if (mpu_pwrdm == NULL) { + printk(KERN_ERR "Failed to get mpu_pwrdm\n"); + goto err2; + } + + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); + + suspend_set_ops(&omap_pm_ops); + + pm_idle = omap3_pm_idle; + +err1: + return ret; +err2: + free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { + list_del(&pwrst->node); + kfree(pwrst); + } + return ret; +} + +late_initcall(omap3_pm_init); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 812d50ee495..cb1ae84e092 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -276,6 +276,8 @@ /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP3430_EN_GPIO1 (1 << 3) #define OMAP3430_EN_GPIO1_SHIFT 3 +#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_SHIFT 1 #define OMAP3430_EN_GPT1 (1 << 0) #define OMAP3430_EN_GPT1_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 7c8e0c42b05..9937e281469 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -203,9 +203,11 @@ #define OMAP3430_PM_MPUGRPSEL 0x00a4 #define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL +#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8 #define OMAP3430_PM_IVAGRPSEL 0x00a8 #define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL +#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4 #define OMAP3430_PM_PREPWSTST 0x00e8 diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2a30060cb4b..2045441e838 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +/* SDRC_POWER register bits */ +#define SDRC_POWER_EXTCLKDIS_SHIFT 3 +#define SDRC_POWER_PWDENA_SHIFT 2 +#define SDRC_POWER_PAGEPOLICY_SHIFT 0 /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate @@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) { struct omap_sdrc_params *sp; + if (!sdrc_init_params) + return NULL; + sp = sdrc_init_params; - while (sp->rate != r) + while (sp->rate && sp->rate != r) sp++; if (!sp->rate) @@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) omap2_sms_base = omap2_globals->sms; } -/* turn on smart idle modes for SDRAM scheduler and controller */ +/** + * omap2_sdrc_init - initialize SMS, SDRC devices on boot + * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * + * Turn on smart idle modes for SDRAM scheduler and controller. + * Program a known-good configuration for the SDRC to deal with buggy + * bootloaders. + */ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) { u32 l; @@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) sdrc_write_reg(l, SDRC_SYSCONFIG); sdrc_init_params = sp; + + /* XXX Enable SRFRONIDLEREQ here also? */ + l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | + (1 << SDRC_POWER_PWDENA_SHIFT) | + (1 << SDRC_POWER_PAGEPOLICY_SHIFT); + sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 29dc6f52905..b094c15bfe4 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -6,6 +6,8 @@ * Copyright (C) 2005-2008 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * + * Major rework for PM support by Kevin Hilman + * * Based off of arch/arm/mach-omap/omap1/serial.c * * Copyright (C) 2009 Texas Instruments @@ -24,9 +26,50 @@ #include <mach/common.h> #include <mach/board.h> +#include <mach/clock.h> +#include <mach/control.h> + +#include "prm.h" +#include "pm.h" +#include "prm-regbits-34xx.h" + +#define UART_OMAP_WER 0x17 /* Wake-up enable register */ + +#define DEFAULT_TIMEOUT (5 * HZ) + +struct omap_uart_state { + int num; + int can_sleep; + struct timer_list timer; + u32 timeout; -static struct clk *uart_ick[OMAP_MAX_NR_PORTS]; -static struct clk *uart_fck[OMAP_MAX_NR_PORTS]; + void __iomem *wk_st; + void __iomem *wk_en; + u32 wk_mask; + u32 padconf; + + struct clk *ick; + struct clk *fck; + int clocked; + + struct plat_serial8250_port *p; + struct list_head node; + +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + int context_valid; + + /* Registers to be saved/restored for OFF-mode */ + u16 dll; + u16 dlh; + u16 ier; + u16 sysc; + u16 scr; + u16 wer; +#endif +}; + +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; +static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data[] = { { @@ -77,30 +120,358 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ -static inline void __init omap_serial_reset(struct plat_serial8250_port *p) +static inline void __init omap_uart_reset(struct omap_uart_state *uart) { + struct plat_serial8250_port *p = uart->p; + serial_write_reg(p, UART_OMAP_MDR1, 0x07); serial_write_reg(p, UART_OMAP_SCR, 0x08); serial_write_reg(p, UART_OMAP_MDR1, 0x00); serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); } -void omap_serial_enable_clocks(int enable) +#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) + +static int enable_off_mode; /* to be removed by full off-mode patches */ + +static void omap_uart_save_context(struct omap_uart_state *uart) { - int i; - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - if (uart_ick[i] && uart_fck[i]) { - if (enable) { - clk_enable(uart_ick[i]); - clk_enable(uart_fck[i]); - } else { - clk_disable(uart_ick[i]); - clk_disable(uart_fck[i]); + u16 lcr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + lcr = serial_read_reg(p, UART_LCR); + serial_write_reg(p, UART_LCR, 0xBF); + uart->dll = serial_read_reg(p, UART_DLL); + uart->dlh = serial_read_reg(p, UART_DLM); + serial_write_reg(p, UART_LCR, lcr); + uart->ier = serial_read_reg(p, UART_IER); + uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); + uart->scr = serial_read_reg(p, UART_OMAP_SCR); + uart->wer = serial_read_reg(p, UART_OMAP_WER); + + uart->context_valid = 1; +} + +static void omap_uart_restore_context(struct omap_uart_state *uart) +{ + u16 efr = 0; + struct plat_serial8250_port *p = uart->p; + + if (!enable_off_mode) + return; + + if (!uart->context_valid) + return; + + uart->context_valid = 0; + + serial_write_reg(p, UART_OMAP_MDR1, 0x7); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(p, UART_EFR); + serial_write_reg(p, UART_EFR, UART_EFR_ECB); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, 0x0); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_DLL, uart->dll); + serial_write_reg(p, UART_DLM, uart->dlh); + serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(p, UART_IER, uart->ier); + serial_write_reg(p, UART_FCR, 0xA1); + serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(p, UART_EFR, efr); + serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(p, UART_OMAP_SCR, uart->scr); + serial_write_reg(p, UART_OMAP_WER, uart->wer); + serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ +} +#else +static inline void omap_uart_save_context(struct omap_uart_state *uart) {} +static inline void omap_uart_restore_context(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */ + +static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) +{ + if (uart->clocked) + return; + + clk_enable(uart->ick); + clk_enable(uart->fck); + uart->clocked = 1; + omap_uart_restore_context(uart); +} + +#ifdef CONFIG_PM + +static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_save_context(uart); + uart->clocked = 0; + clk_disable(uart->ick); + clk_disable(uart->fck); +} + +static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, + int enable) +{ + struct plat_serial8250_port *p = uart->p; + u16 sysc; + + sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; + if (enable) + sysc |= 0x2 << 3; + else + sysc |= 0x1 << 3; + + serial_write_reg(p, UART_OMAP_SYSC, sysc); +} + +static void omap_uart_block_sleep(struct omap_uart_state *uart) +{ + omap_uart_enable_clocks(uart); + + omap_uart_smart_idle_enable(uart, 0); + uart->can_sleep = 0; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + del_timer(&uart->timer); +} + +static void omap_uart_allow_sleep(struct omap_uart_state *uart) +{ + if (!uart->clocked) + return; + + omap_uart_smart_idle_enable(uart, 1); + uart->can_sleep = 1; + del_timer(&uart->timer); +} + +static void omap_uart_idle_timer(unsigned long data) +{ + struct omap_uart_state *uart = (struct omap_uart_state *)data; + + omap_uart_allow_sleep(uart); +} + +void omap_uart_prepare_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num && uart->can_sleep) { + omap_uart_disable_clocks(uart); + return; + } + } +} + +void omap_uart_resume_idle(int num) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (num == uart->num) { + omap_uart_enable_clocks(uart); + + /* Check for IO pad wakeup */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 p = omap_ctrl_readw(uart->padconf); + + if (p & OMAP3_PADCONF_WAKEUPEVENT0) + omap_uart_block_sleep(uart); } + + /* Check for normal UART wakeup */ + if (__raw_readl(uart->wk_st) & uart->wk_mask) + omap_uart_block_sleep(uart); + + return; } } } +void omap_uart_prepare_suspend(void) +{ + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + omap_uart_allow_sleep(uart); + } +} + +int omap_uart_can_sleep(void) +{ + struct omap_uart_state *uart; + int can_sleep = 1; + + list_for_each_entry(uart, &uart_list, node) { + if (!uart->clocked) + continue; + + if (!uart->can_sleep) { + can_sleep = 0; + continue; + } + + /* This UART can now safely sleep. */ + omap_uart_allow_sleep(uart); + } + + return can_sleep; +} + +/** + * omap_uart_interrupt() + * + * This handler is used only to detect that *any* UART interrupt has + * occurred. It does _nothing_ to handle the interrupt. Rather, + * any UART interrupt will trigger the inactivity timer so the + * UART will not idle or sleep for its timeout period. + * + **/ +static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) +{ + struct omap_uart_state *uart = dev_id; + + omap_uart_block_sleep(uart); + + return IRQ_NONE; +} + +static u32 sleep_timeout = DEFAULT_TIMEOUT; + +static void omap_uart_idle_init(struct omap_uart_state *uart) +{ + u32 v; + struct plat_serial8250_port *p = uart->p; + int ret; + + uart->can_sleep = 0; + uart->timeout = sleep_timeout; + setup_timer(&uart->timer, omap_uart_idle_timer, + (unsigned long) uart); + mod_timer(&uart->timer, jiffies + uart->timeout); + omap_uart_smart_idle_enable(uart, 0); + + if (cpu_is_omap34xx()) { + u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 wk_mask = 0; + u32 padconf = 0; + + uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1); + uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1); + switch (uart->num) { + case 0: + wk_mask = OMAP3430_ST_UART1_MASK; + padconf = 0x182; + break; + case 1: + wk_mask = OMAP3430_ST_UART2_MASK; + padconf = 0x17a; + break; + case 2: + wk_mask = OMAP3430_ST_UART3_MASK; + padconf = 0x19e; + break; + } + uart->wk_mask = wk_mask; + uart->padconf = padconf; + } else if (cpu_is_omap24xx()) { + u32 wk_mask = 0; + + if (cpu_is_omap2430()) { + uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1); + } else if (cpu_is_omap2420()) { + uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1); + uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1); + } + switch (uart->num) { + case 0: + wk_mask = OMAP24XX_ST_UART1_MASK; + break; + case 1: + wk_mask = OMAP24XX_ST_UART2_MASK; + break; + case 2: + wk_mask = OMAP24XX_ST_UART3_MASK; + break; + } + uart->wk_mask = wk_mask; + } else { + uart->wk_en = 0; + uart->wk_st = 0; + uart->wk_mask = 0; + uart->padconf = 0; + } + + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v; + + v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } + + p->flags |= UPF_SHARE_IRQ; + ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, + "serial idle", (void *)uart); + WARN_ON(ret); +} + +static ssize_t sleep_timeout_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", sleep_timeout / HZ); +} + +static ssize_t sleep_timeout_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + struct omap_uart_state *uart; + unsigned int value; + + if (sscanf(buf, "%u", &value) != 1) { + printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + return -EINVAL; + } + sleep_timeout = value * HZ; + list_for_each_entry(uart, &uart_list, node) { + uart->timeout = sleep_timeout; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + } + return n; +} + +static struct kobj_attribute sleep_timeout_attr = + __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); + +#else +static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#endif /* CONFIG_PM */ + static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, @@ -111,7 +482,7 @@ static struct platform_device serial_device = { void __init omap_serial_init(void) { - int i; + int i, err; const struct omap_uart_config *info; char name[16]; @@ -132,6 +503,7 @@ void __init omap_serial_init(void) for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; + struct omap_uart_state *uart = &omap_uart[i]; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -140,23 +512,39 @@ void __init omap_serial_init(void) } sprintf(name, "uart%d_ick", i+1); - uart_ick[i] = clk_get(NULL, name); - if (IS_ERR(uart_ick[i])) { + uart->ick = clk_get(NULL, name); + if (IS_ERR(uart->ick)) { printk(KERN_ERR "Could not get uart%d_ick\n", i+1); - uart_ick[i] = NULL; - } else - clk_enable(uart_ick[i]); + uart->ick = NULL; + } sprintf(name, "uart%d_fck", i+1); - uart_fck[i] = clk_get(NULL, name); - if (IS_ERR(uart_fck[i])) { + uart->fck = clk_get(NULL, name); + if (IS_ERR(uart->fck)) { printk(KERN_ERR "Could not get uart%d_fck\n", i+1); - uart_fck[i] = NULL; - } else - clk_enable(uart_fck[i]); + uart->fck = NULL; + } + + if (!uart->ick || !uart->fck) + continue; - omap_serial_reset(p); + uart->num = i; + p->private_data = uart; + uart->p = p; + list_add(&uart->node, &uart_list); + + omap_uart_enable_clocks(uart); + omap_uart_reset(uart); + omap_uart_idle_init(uart); } - platform_device_register(&serial_device); + err = platform_device_register(&serial_device); + +#ifdef CONFIG_PM + if (!err) + err = sysfs_create_file(&serial_device.dev.kobj, + &sleep_timeout_attr.attr); +#endif + } + diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index bf9e96105e1..130aadbfa08 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -28,7 +28,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/pm.h> #include <mach/omap24xx.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S new file mode 100644 index 00000000000..e5e2553e79a --- /dev/null +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -0,0 +1,436 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2007 + * Texas Instruments + * Karthik Dasu <karthik-dp@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/io.h> +#include <mach/control.h> + +#include "prm.h" +#include "sdrc.h" + +#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ + OMAP3430_PM_PREPWSTST) +#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is + * available */ +#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ + OMAP343X_CONTROL_MEM_WKUP +\ + SCRATCHPAD_MEM_OFFS) +#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) + + .text +/* Function call to get the restore pointer for resume from OFF */ +ENTRY(get_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_restore_pointer_sz) + .word . - get_restore_pointer_sz +/* + * Forces OMAP into idle state + * + * omap34xx_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap34xx_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack +loop: + /*b loop*/ @Enable to debug by stepping through code + /* r0 contains restore pointer in sdram */ + /* r1 contains information about saving context */ + ldr r4, sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + + cmp r1, #0x0 + /* If context save is required, do that and execute wfi */ + bne save_context_wfi + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore: + /* b restore*/ @ Enable to debug restore code + /* Check what was the reason for mpu reset and store the reason in r9*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost - In this case, we wont be here */ + /* 3 - Both L1 and L2 lost */ + ldr r1, pm_pwstctrl_mpu + ldr r2, [r1] + and r2, r2, #0x3 + cmp r2, #0x0 @ Check if target power state was OFF or RET + moveq r9, #0x3 @ MPU OFF => L1 and L2 lost + movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation + bne logic_l1_restore + /* Execute smi to invalidate L2 cache */ + mov r12, #0x1 @ set up to invalide L2 +smi: .word 0xE1600070 @ Call SMI monitor (smieq) +logic_l1_restore: + mov r1, #0 + /* Invalidate all instruction caches to PoU + * and flush branch target cache */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r4, scratchpad_base + ldr r3, [r4,#0xBC] + ldmia r3!, {r4-r6} + mov sp, r4 + msr spsr_cxsf, r5 + mov lr, r6 + + ldmia r3!, {r4-r9} + /* Coprocessor access Control Register */ + mcr p15, 0, r4, c1, c0, 2 + + /* TTBR0 */ + MCR p15, 0, r5, c2, c0, 0 + /* TTBR1 */ + MCR p15, 0, r6, c2, c0, 1 + /* Translation table base control register */ + MCR p15, 0, r7, c2, c0, 2 + /*domain access Control Register */ + MCR p15, 0, r8, c3, c0, 0 + /* data fault status Register */ + MCR p15, 0, r9, c5, c0, 0 + + ldmia r3!,{r4-r8} + /* instruction fault status Register */ + MCR p15, 0, r4, c5, c0, 1 + /*Data Auxiliary Fault Status Register */ + MCR p15, 0, r5, c5, c1, 0 + /*Instruction Auxiliary Fault Status Register*/ + MCR p15, 0, r6, c5, c1, 1 + /*Data Fault Address Register */ + MCR p15, 0, r7, c6, c0, 0 + /*Instruction Fault Address Register*/ + MCR p15, 0, r8, c6, c0, 2 + ldmia r3!,{r4-r7} + + /* user r/w thread and process ID */ + MCR p15, 0, r4, c13, c0, 2 + /* user ro thread and process ID */ + MCR p15, 0, r5, c13, c0, 3 + /*Privileged only thread and process ID */ + MCR p15, 0, r6, c13, c0, 4 + /* cache size selection */ + MCR p15, 2, r7, c0, c0, 0 + ldmia r3!,{r4-r8} + /* Data TLB lockdown registers */ + MCR p15, 0, r4, c10, c0, 0 + /* Instruction TLB lockdown registers */ + MCR p15, 0, r5, c10, c0, 1 + /* Secure or Nonsecure Vector Base Address */ + MCR p15, 0, r6, c12, c0, 0 + /* FCSE PID */ + MCR p15, 0, r7, c13, c0, 0 + /* Context PID */ + MCR p15, 0, r8, c13, c0, 1 + + ldmia r3!,{r4-r5} + /* primary memory remap register */ + MCR p15, 0, r4, c10, c2, 0 + /*normal memory remap register */ + MCR p15, 0, r5, c10, c2, 1 + + /* Restore cpsr */ + ldmia r3!,{r4} /*load CPSR from SDRAM*/ + msr cpsr, r4 /*store cpsr */ + + /* Enabling MMU here */ + mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */ + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error +usettbr0: + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 /* r4 = 31 to 20 bits of pc */ + /* Extract the value to be written to table entry */ + ldr r1, table_entry + add r1, r1, r4 /* r1 has value to be written to table entry*/ + /* Getting the address of table entry to modify */ + lsr r4, #18 + add r2, r4 /* r2 has the location which needs to be modified */ + /* Storing previous entry of location being modified */ + ldr r5, scratchpad_base + ldr r4, [r2] + str r4, [r5, #0xC0] + /* Modify the table entry */ + str r1, [r2] + /* Storing address of entry being modified + * - will be restored after enabling MMU */ + ldr r5, scratchpad_base + str r2, [r5, #0xC4] + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + /* Restore control register but dont enable caches here*/ + /* Caches will be enabled after restoring MMU table entry */ + ldmia r3!, {r4} + /* Store previous value of control register in scratchpad */ + str r4, [r5, #0xC8] + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + + ldmfd sp!, {r0-r12, pc} @ restore regs and return +save_context_wfi: + /*b save_context_wfi*/ @ enable to debug save code + mov r8, r0 /* Store SDRAM address in r8 */ + /* Check what that target sleep state is:stored in r1*/ + /* 1 - Only L1 and logic lost */ + /* 2 - Only L2 lost */ + /* 3 - Both L1 and L2 lost */ + cmp r1, #0x2 /* Only L2 lost */ + beq clean_l2 + cmp r1, #0x1 /* L2 retained */ + /* r9 stores whether to clean L2 or not*/ + moveq r9, #0x0 /* Dont Clean L2 */ + movne r9, #0x1 /* Clean L2 */ +l1_logic_lost: + /* Store sp and spsr to SDRAM */ + mov r4, sp + mrs r5, spsr + mov r6, lr + stmia r8!, {r4-r6} + /* Save all ARM registers */ + /* Coprocessor access control register */ + mrc p15, 0, r6, c1, c0, 2 + stmia r8!, {r6} + /* TTBR0, TTBR1 and Translation table base control */ + mrc p15, 0, r4, c2, c0, 0 + mrc p15, 0, r5, c2, c0, 1 + mrc p15, 0, r6, c2, c0, 2 + stmia r8!, {r4-r6} + /* Domain access control register, data fault status register, + and instruction fault status register */ + mrc p15, 0, r4, c3, c0, 0 + mrc p15, 0, r5, c5, c0, 0 + mrc p15, 0, r6, c5, c0, 1 + stmia r8!, {r4-r6} + /* Data aux fault status register, instruction aux fault status, + datat fault address register and instruction fault address register*/ + mrc p15, 0, r4, c5, c1, 0 + mrc p15, 0, r5, c5, c1, 1 + mrc p15, 0, r6, c6, c0, 0 + mrc p15, 0, r7, c6, c0, 2 + stmia r8!, {r4-r7} + /* user r/w thread and process ID, user r/o thread and process ID, + priv only thread and process ID, cache size selection */ + mrc p15, 0, r4, c13, c0, 2 + mrc p15, 0, r5, c13, c0, 3 + mrc p15, 0, r6, c13, c0, 4 + mrc p15, 2, r7, c0, c0, 0 + stmia r8!, {r4-r7} + /* Data TLB lockdown, instruction TLB lockdown registers */ + mrc p15, 0, r5, c10, c0, 0 + mrc p15, 0, r6, c10, c0, 1 + stmia r8!, {r5-r6} + /* Secure or non secure vector base address, FCSE PID, Context PID*/ + mrc p15, 0, r4, c12, c0, 0 + mrc p15, 0, r5, c13, c0, 0 + mrc p15, 0, r6, c13, c0, 1 + stmia r8!, {r4-r6} + /* Primary remap, normal remap registers */ + mrc p15, 0, r4, c10, c2, 0 + mrc p15, 0, r5, c10, c2, 1 + stmia r8!,{r4-r5} + + /* Store current cpsr*/ + mrs r2, cpsr + stmia r8!, {r2} + + mrc p15, 0, r4, c1, c0, 0 + /* save control register */ + stmia r8!, {r4} +clean_caches: + /* Clean Data or unified cache to POU*/ + /* How to invalidate only L1 cache???? - #FIX_ME# */ + /* mcr p15, 0, r11, c7, c11, 1 */ + cmp r9, #1 /* Check whether L2 inval is required or not*/ + bne skip_l2_inval +clean_l2: + /* read clidr */ + mrc p15, 1, r0, c0, c0, 1 + /* extract loc from clidr */ + ands r3, r0, #0x7000000 + /* left align loc bit field */ + mov r3, r3, lsr #23 + /* if loc is 0, then no need to clean */ + beq finished + /* start clean at cache level 0 */ + mov r10, #0 +loop1: + /* work out 3x current cache level */ + add r2, r10, r10, lsr #1 + /* extract cache type bits from clidr*/ + mov r1, r0, lsr r2 + /* mask of the bits for current cache only */ + and r1, r1, #7 + /* see what cache we have at this level */ + cmp r1, #2 + /* skip if no cache, or just i-cache */ + blt skip + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + /* isb to sych the new cssr&csidr */ + isb + /* read the new csidr */ + mrc p15, 1, r1, c0, c0, 0 + /* extract the length of the cache lines */ + and r2, r1, #7 + /* add 4 (line length offset) */ + add r2, r2, #4 + ldr r4, assoc_mask + /* find maximum number on the way size */ + ands r4, r4, r1, lsr #3 + /* find bit position of way size increment */ + clz r5, r4 + ldr r7, numset_mask + /* extract max number of the index size*/ + ands r7, r7, r1, lsr #13 +loop2: + mov r9, r4 + /* create working copy of max way size*/ +loop3: + /* factor way and cache number into r11 */ + orr r11, r10, r9, lsl r5 + /* factor index number into r11 */ + orr r11, r11, r7, lsl r2 + /*clean & invalidate by set/way */ + mcr p15, 0, r11, c7, c10, 2 + /* decrement the way*/ + subs r9, r9, #1 + bge loop3 + /*decrement the index */ + subs r7, r7, #1 + bge loop2 +skip: + add r10, r10, #2 + /* increment cache number */ + cmp r3, r10 + bgt loop1 +finished: + /*swith back to cache level 0 */ + mov r10, #0 + /* select current cache level in cssr */ + mcr p15, 2, r10, c0, c0, 0 + isb +skip_l2_inval: + /* Data memory barrier and Data sync barrier */ + mov r1, #0 + mcr p15, 0, r1, c7, c10, 4 + mcr p15, 0, r1, c7, c10, 5 + + wfi @ wait for interrupt + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bl i_dll_wait + /* restore regs and return */ + ldmfd sp!, {r0-r12, pc} + +i_dll_wait: + ldr r4, clk_stabilize_delay + +i_dll_delay: + subs r4, r4, #0x1 + bne i_dll_delay + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +pm_prepwstst_core: + .word PM_PREPWSTST_CORE_V +pm_prepwstst_mpu: + .word PM_PREPWSTST_MPU_V +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sdrc_power: + .word SDRC_POWER_V +context_mem: + .word 0x803E3E14 +clk_stabilize_delay: + .word 0x000001FF +assoc_mask: + .word 0x3ff +numset_mask: + .word 0x7fff +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +cache_pred_disable_mask: + .word 0xFFFFE7FB +ENTRY(omap34xx_cpu_suspend_sz) + .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 2c714613634..c080c82521e 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -40,69 +40,74 @@ /* * Change frequency of core dpll * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for + * SDRC rates < 83MHz */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack + ldr r4, [sp, #52] @ pull extra args off the stack + dsb @ flush buffered writes to interconnect cmp r3, #0x2 blne configure_sdrc - cmp r3, #0x2 + cmp r4, #0x1 + bleq unlock_dll blne lock_dll - cmp r3, #0x1 - blne unlock_dll bl sdram_in_selfrefresh @ put the SDRAM in self refresh bl configure_core_dpll bl enable_sdrc - cmp r3, #0x1 - blne wait_dll_unlock - cmp r3, #0x2 + cmp r4, #0x1 + bleq wait_dll_unlock blne wait_dll_lock cmp r3, #0x1 blne configure_sdrc + isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return unlock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - orr r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + orr r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr lock_dll: - ldr r4, omap3_sdrc_dlla_ctrl - ldr r5, [r4] - bic r5, r5, #0x4 - str r5, [r4] + ldr r11, omap3_sdrc_dlla_ctrl + ldr r12, [r11] + bic r12, r12, #0x4 + str r12, [r11] @ (no OCP barrier needed) bx lr sdram_in_selfrefresh: - mov r5, #0x0 @ Move 0 to R5 - mcr p15, 0, r5, c7, c10, 5 @ memory barrier - ldr r4, omap3_sdrc_power @ read the SDRC_POWER register - ldr r5, [r4] @ read the contents of SDRC_POWER - orr r5, r5, #0x40 @ enable self refresh on idle req - str r5, [r4] @ write back to SDRC_POWER register - ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg - ldr r5, [r4] - bic r5, r5, #0x2 @ disable iclk bit for SRDC - str r5, [r4] + ldr r11, omap3_sdrc_power @ read the SDRC_POWER register + ldr r12, [r11] @ read the contents of SDRC_POWER + mov r9, r12 @ keep a copy of SDRC_POWER bits + orr r12, r12, #0x40 @ enable self refresh on idle req + bic r12, r12, #0x4 @ clear PWDENA + str r12, [r11] @ write back to SDRC_POWER register + ldr r12, [r11] @ posted-write barrier for SDRC + ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r12, [r11] + bic r12, r12, #0x2 @ disable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 @ check for SDRC idle - cmp r5, #2 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 @ check for SDRC idle + cmp r12, #2 bne wait_sdrc_idle bx lr configure_core_dpll: - ldr r4, omap3_cm_clksel1_pll - ldr r5, [r4] - ldr r6, core_m2_mask_val @ modify m2 for core dpll - and r5, r5, r6 - orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val - str r5, [r4] - mov r5, #0x800 @ wait for the clock to stabilise + ldr r11, omap3_cm_clksel1_pll + ldr r12, [r11] + ldr r10, core_m2_mask_val @ modify m2 for core dpll + and r12, r12, r10 + orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val + str r12, [r11] + ldr r12, [r11] @ posted-write barrier for CM + mov r12, #0x800 @ wait for the clock to stabilise cmp r3, #2 bne wait_clk_stable bx lr wait_clk_stable: - subs r5, r5, #1 + subs r12, r12, #1 bne wait_clk_stable nop nop @@ -116,42 +121,42 @@ wait_clk_stable: nop bx lr enable_sdrc: - ldr r4, omap3_cm_iclken1_core - ldr r5, [r4] - orr r5, r5, #0x2 @ enable iclk bit for SDRC - str r5, [r4] + ldr r11, omap3_cm_iclken1_core + ldr r12, [r11] + orr r12, r12, #0x2 @ enable iclk bit for SDRC + str r12, [r11] wait_sdrc_idle1: - ldr r4, omap3_cm_idlest1_core - ldr r5, [r4] - and r5, r5, #0x2 - cmp r5, #0 + ldr r11, omap3_cm_idlest1_core + ldr r12, [r11] + and r12, r12, #0x2 + cmp r12, #0 bne wait_sdrc_idle1 - ldr r4, omap3_sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] +restore_sdrc_power_val: + ldr r11, omap3_sdrc_power + str r9, [r11] @ restore SDRC_POWER, no barrier needed bx lr wait_dll_lock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x4 bne wait_dll_lock bx lr wait_dll_unlock: - ldr r4, omap3_sdrc_dlla_status - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x0 + ldr r11, omap3_sdrc_dlla_status + ldr r12, [r11] + and r12, r12, #0x4 + cmp r12, #0x0 bne wait_dll_unlock bx lr configure_sdrc: - ldr r4, omap3_sdrc_rfr_ctrl - str r0, [r4] - ldr r4, omap3_sdrc_actim_ctrla - str r1, [r4] - ldr r4, omap3_sdrc_actim_ctrlb - str r2, [r4] + ldr r11, omap3_sdrc_rfr_ctrl + str r0, [r11] + ldr r11, omap3_sdrc_actim_ctrla + str r1, [r11] + ldr r11, omap3_sdrc_actim_ctrlb + str r2, [r11] + ldr r2, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 34a56a136ef..d85296dc896 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,10 +28,20 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pm.h> #include <mach/mux.h> #include <mach/usb.h> +#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404) + +static void __init usb_musb_pm_init(void) +{ + /* Ensure force-idle mode for OTG controller */ + if (cpu_is_omap34xx()) + omap_writel(0, OTG_SYSCONFIG); +} + +#ifdef CONFIG_USB_MUSB_SOC + static struct resource musb_resources[] = { [0] = { /* start and end set dynamically */ .flags = IORESOURCE_MEM, @@ -184,4 +194,13 @@ void __init usb_musb_init(void) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); return; } + + usb_musb_pm_init(); +} + +#else +void __init usb_musb_init(void) +{ + usb_musb_pm_init(); } +#endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 89499e67b67..f8a61249f7d 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -176,7 +176,7 @@ endchoice config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" - depends on OMAP_MUX + depends on ARCH_OMAP1 && OMAP_MUX default y help Select this option if you want to have your system wake up diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 0fcfcd68709..e8c327a45a5 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -273,13 +273,13 @@ void recalculate_root_clocks(void) } /** - * clk_init_one - initialize any fields in the struct clk before clk init + * clk_preinit - initialize any fields in the struct clk before clk init * @clk: struct clk * to initialize * * Initialize any struct clk fields needed before normal clk initialization * can run. No return value. */ -void clk_init_one(struct clk *clk) +void clk_preinit(struct clk *clk) { INIT_LIST_HEAD(&clk->children); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 66738c3854c..ebcf006406f 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/pm.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index c20e02ec303..f9f65e1ba3f 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -121,7 +121,7 @@ struct clk_functions { extern unsigned int mpurate; extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_init_one(struct clk *clk); +extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index 4b188334c66..fdeab421b4d 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -33,8 +33,6 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -extern void omap_serial_init(void); -extern void omap_serial_enable_clocks(int enable); #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index f45ec621da9..8140dbccb7b 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -144,6 +144,10 @@ #define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +/* 34xx D2D idle-related pins, handled by PM core */ +#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 +#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -189,6 +193,15 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) +/* CONTROL_IVA2_BOOTMOD bits */ +#define OMAP3_IVA2_BOOTMOD_SHIFT 0 +#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) +#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) + +/* CONTROL_PADCONF_X bits */ +#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) +#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 5bc331e93cf..8015fe27c8b 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -556,6 +556,7 @@ #ifndef __ASSEMBLY__ extern void omap_init_irq(void); +extern int omap_irq_pending(void); #endif #include <mach/hardware.h> diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index e37894e423b..13abd02d152 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -52,4 +52,13 @@ __ret; \ }) +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +extern int omap_uart_can_sleep(void); +extern void omap_uart_check_wakeup(void); +extern void omap_uart_prepare_suspend(void); +extern void omap_uart_prepare_idle(int num); +extern void omap_uart_resume_idle(int num); +#endif + #endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index ab35d622dcf..dca7c16ae90 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz; extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2); + u32 sdrc_actim_ctrlb, u32 m2, + u32 unlock_dll); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h index 69f0ceed500..f337e1761e2 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/mach/usb.h @@ -27,13 +27,7 @@ #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE -#ifdef CONFIG_USB_MUSB_SOC extern void usb_musb_init(void); -#else -static inline void usb_musb_init(void) -{ -} -#endif #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 67a90708b68..a5b9bcd6b10 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -214,6 +214,15 @@ void __init omap_map_sram(void) base = OMAP3_SRAM_PA; base = ROUND_DOWN(base, PAGE_SIZE); omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; } if (cpu_is_omap44xx()) { @@ -362,14 +371,15 @@ static inline int omap243x_sram_init(void) static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, u32 sdrc_actim_ctrlb, - u32 m2); + u32 m2, u32 unlock_dll); u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2) + u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll) { BUG_ON(!_omap3_sram_configure_core_dpll); return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2); + sdrc_actim_ctrlb, m2, + unlock_dll); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index f2e9de1414d..6391e3dc800 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -39,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/onenand.h> #include <mach/gpio.h> -#include <mach/pm.h> #include <mach/dma.h> |