summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/atm/ueagle-atm.c2
-rw-r--r--drivers/usb/class/cdc-acm.c2
-rw-r--r--drivers/usb/gadget/at91_udc.h2
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.c2
-rw-r--r--drivers/usb/gadget/omap_udc.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-sched.c2
-rw-r--r--drivers/usb/host/r8a66597.h2
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c2
-rw-r--r--drivers/usb/misc/usbtest.c2
-rw-r--r--drivers/usb/serial/io_edgeport.c8
-rw-r--r--drivers/usb/serial/mos7840.c8
12 files changed, 18 insertions, 18 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index fad5d916564..c5ec1a55eee 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
bi.dwAddress = swab32(blockidx->PageAddress);
uea_dbg(INS_TO_USBDEV(sc),
- "sending block %u for DSP page %u size %u adress %x\n",
+ "sending block %u for DSP page %u size %u address %x\n",
blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
/* send block info through the IDMA pipe */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b0f9873ce6b..bcc42136c93 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -915,7 +915,7 @@ next_desc:
}
if (data_interface_num != call_interface_num)
- dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+ dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
skip_normal_probe:
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index aecc7225a8c..f3095a90a0e 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -53,7 +53,7 @@
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
-#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
+#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d59eb92a847..63e8fa3a69e 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
spin_lock_irqsave(&udc->lock, flags);
- /* ------basic driver infomation ---- */
+ /* ------basic driver information ---- */
t = scnprintf(next, size,
DRIVER_DESC "\n"
"%s version: %s\n"
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7d6bef56cb0..e6d68bda428 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/* STATUS for zero length DATA stages is
* always an IN ... even for IN transfers,
- * a wierd case which seem to stall OMAP.
+ * a weird case which seem to stall OMAP.
*/
UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
UDC_CTRL_REG = UDC_CLR_EP;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f35795fbd89..adb0defa163 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -25,7 +25,7 @@
#include "ehci-fsl.h"
-/* FIXME: Power Managment is un-ported so temporarily disable it */
+/* FIXME: Power Management is un-ported so temporarily disable it */
#undef CONFIG_PM
/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 80d99bce2b3..dce305bd62a 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
* low/fullspeed transfer can "carry over" from one uframe to the next,
* since the TT just performs downstream transfers in sequence.
*
- * For example two seperate 100 usec transfers can start in the same uframe,
+ * For example two separate 100 usec transfers can start in the same uframe,
* and the second one would "carry over" 75 usecs into the next uframe.
*/
static void
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index fe9ceb077d9..57388252b69 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -405,7 +405,7 @@
struct r8a66597_pipe_info {
u16 pipenum;
- u16 address; /* R8A66597 HCD usb addres */
+ u16 address; /* R8A66597 HCD usb address */
u16 epnum;
u16 maxpacket;
u16 type;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 8832a72bb1f..cb7fa0eaf3a 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
usb_kill_urb(urb);
retval = -ETIMEDOUT;
} else {
- /* URB completed within timout */
+ /* URB completed within timeout */
retval = urb->status;
readbytes = urb->actual_length;
}
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index f1b886c204c..da922dfc0dc 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev *dev,
len += vary;
/* [real world] the "zero bytes IN" case isn't really used.
- * hardware can easily trip up in this wierd case, since its
+ * hardware can easily trip up in this weird case, since its
* status stage is IN, not OUT like other ep0in transfers.
*/
if (len > length)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index a5d2e115e16..3428ccc28da 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
*
* This function will block the close until one of the following:
* 1. Response to our Chase comes from Edgeport
- * 2. A timout of 10 seconds without activity has expired
+ * 2. A timeout of 10 seconds without activity has expired
* (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
*
************************************************************************/
@@ -999,7 +999,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
return;
}
} else {
- // Reset timout value back to 10 seconds
+ // Reset timeout value back to 10 seconds
dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
loop = 10;
}
@@ -1014,7 +1014,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
* This function will block the close until one of the following:
* 1. TX count are 0
* 2. The edgeport has stopped
- * 3. A timout of 3 seconds without activity has expired
+ * 3. A timeout of 3 seconds without activity has expired
*
************************************************************************/
static void block_until_tx_empty (struct edgeport_port *edge_port)
@@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
return;
}
} else {
- // Reset timout value back to seconds
+ // Reset timeout value back to seconds
loop = 30;
}
}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c29c9127113..869ecd374cb 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
* This function will block the close until one of the following:
* 1. TX count are 0
* 2. The mos7840 has stopped
- * 3. A timout of 3 seconds without activity has expired
+ * 3. A timeout of 3 seconds without activity has expired
*
************************************************************************/
static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
@@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
dbg("%s - TIMEOUT", __FUNCTION__);
return;
} else {
- /* Reset timout value back to seconds */
+ /* Reset timeout value back to seconds */
wait = 30;
}
}
@@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
*
* This function will block the close until one of the following:
* 1. Response to our Chase comes from mos7840
- * 2. A timout of 10 seconds without activity has expired
+ * 2. A timeout of 10 seconds without activity has expired
* (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
*
************************************************************************/
@@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_response(struct moschip_port
dbg("%s - TIMEOUT", __FUNCTION__);
return;
} else {
- /* Reset timout value back to seconds */
+ /* Reset timeout value back to seconds */
wait = 10;
}
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 09:14:03 +0000