diff options
47 files changed, 889 insertions, 685 deletions
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 9a1e0c514c0..b96ebfe4ef3 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -341,15 +341,14 @@ static void adm8211_interrupt_tci(struct ieee80211_hw *dev) pci_unmap_single(priv->pdev, info->mapping, info->skb->len, PCI_DMA_TODEVICE); - memset(&txi->status, 0, sizeof(txi->status)); + ieee80211_tx_info_clear_status(txi); + skb_pull(skb, sizeof(struct adm8211_tx_hdr)); memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (status & TDES0_STATUS_ES) - txi->status.excessive_retries = 1; - else - txi->flags |= IEEE80211_TX_STAT_ACK; - } + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && + !(status & TDES0_STATUS_ES)) + txi->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(dev, skb); info->skb = NULL; @@ -1691,8 +1690,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_hdr *hdr; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info); + u8 rc_flags; - short_preamble = !!(txrate->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE); + rc_flags = info->control.rates[0].flags; + short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE); plcp_signal = txrate->bitrate; hdr = (struct ieee80211_hdr *)skb->data; @@ -1724,10 +1725,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) if (short_preamble) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); - txhdr->retry_limit = info->control.retry_limit; + txhdr->retry_limit = info->control.rates[0].count; adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 44401f6f578..3773d983ea6 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -541,8 +541,8 @@ ath5k_pci_probe(struct pci_dev *pdev, /* set up multi-rate retry capabilities */ if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_altrates = 3; - hw->max_altrate_tries = 11; + hw->max_rates = 4; + hw->max_rate_tries = 11; } /* Finish private driver data initialization */ @@ -1181,7 +1181,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, (sc->power_level * 2), ieee80211_get_tx_rate(sc->hw, info)->hw_value, - info->control.retry_limit, keyidx, 0, flags, 0, 0); + info->control.rates[0].count, keyidx, 0, flags, 0, 0); if (ret) goto err_unmap; @@ -1193,7 +1193,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) break; mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.retries[i].limit; + mrr_tries[i] = info->control.rates[i + 1].count; } ah->ah_setup_mrr_tx_desc(ah, ds, @@ -1849,30 +1849,26 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - memset(&info->status, 0, sizeof(info->status)); - info->tx_rate_idx = ath5k_hw_to_driver_rix(sc, - ts.ts_rate[ts.ts_final_idx]); - info->status.retry_count = ts.ts_longretry; - + ieee80211_tx_info_clear_status(info); for (i = 0; i < 4; i++) { - struct ieee80211_tx_altrate *r = - &info->status.retries[i]; + struct ieee80211_tx_rate *r = + &info->status.rates[i]; if (ts.ts_rate[i]) { - r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->limit = ts.ts_retry[i]; + r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); + r->count = ts.ts_retry[i]; } else { - r->rate_idx = -1; - r->limit = 0; + r->idx = -1; + r->count = 0; } } - info->status.excessive_retries = 0; + /* count the successful attempt as well */ + info->status.rates[ts.ts_final_idx].count++; + if (unlikely(ts.ts_status)) { sc->ll_stats.dot11ACKFailureCount++; - if (ts.ts_status & AR5K_TXERR_XRETRY) - info->status.excessive_retries = 1; - else if (ts.ts_status & AR5K_TXERR_FILT) + if (ts.ts_status & AR5K_TXERR_FILT) info->flags |= IEEE80211_TX_STAT_TX_FILTERED; } else { info->flags |= IEEE80211_TX_STAT_ACK; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 32acaf7ff62..a7656a3ea1b 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -457,12 +457,13 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, DPRINTF(sc, ATH_DBG_XMIT, "%s: TX complete: skb: %p\n", __func__, skb); + ieee80211_tx_info_clear_status(tx_info); if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; + /* free driver's private data area of tx_info, XXX: HACK! */ + if (tx_info->control.vif != NULL) + kfree(tx_info->control.vif); + tx_info->control.vif = NULL; } if (tx_status->flags & ATH_TX_BAR) { @@ -470,17 +471,12 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { + if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; } - tx_info->status.retry_count = tx_status->retries; + tx_info->status.rates[0].count = tx_status->retries + 1; ieee80211_tx_status(hw, skb); if (an) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 9b252603096..6afafeddeda 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1864,24 +1864,21 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: UGLY HACK!! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; spin_lock_bh(&sc->node_lock); an = ath_node_find(sc, hdr->addr1); spin_unlock_bh(&sc->node_lock); - if (!an || !priv_sta || !ieee80211_is_data(fc)) { - if (tx_info->driver_data[0] != NULL) { - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + if (tx_info_priv == NULL) return; - } - if (tx_info->driver_data[0] != NULL) { + + if (an && priv_sta && ieee80211_is_data(fc)) ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv); - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + + kfree(tx_info_priv); + tx_info->control.vif = NULL; } static void ath_tx_aggr_resp(struct ath_softc *sc, @@ -1927,10 +1924,11 @@ static void ath_tx_aggr_resp(struct ath_softc *sc, } } -static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; @@ -1945,17 +1943,17 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - /* allocate driver private area of tx_info */ - tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); - ASSERT(tx_info->driver_data[0] != NULL); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* allocate driver private area of tx_info, XXX: UGLY HACK! */ + tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; + ASSERT(tx_info_priv != NULL); lowest_idx = rate_lowest_index(sband, sta); tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate_idx = lowest_idx; + tx_info->control.rates[0].idx = lowest_idx; return; } @@ -1966,8 +1964,10 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, tx_info_priv->rcs, &is_probe, false); +#if 0 if (is_probe) sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate; +#endif /* Ratecontrol sometimes returns invalid rate index */ if (tx_info_priv->rcs[0].rix != 0xff) @@ -1975,7 +1975,7 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, else tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix; - sel->rate_idx = tx_info_priv->rcs[0].rix; + tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix; /* Check if aggregation has to be enabled for this tid */ diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index ba818cc2fb5..9fa395418a6 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -168,7 +168,9 @@ static void fill_min_rates(struct sk_buff *skb, struct ath_tx_control *txctl) hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { txctl->use_minrate = 1; @@ -288,13 +290,16 @@ static int ath_tx_prepare(struct ath_softc *sc, if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; if (ieee80211_is_data(fc) && !txctl->use_minrate) { @@ -855,7 +860,9 @@ static int ath_tx_send_normal(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* update starting sequence number for subsequent ADDBA request */ @@ -1249,8 +1256,9 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) } skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && @@ -1431,7 +1439,8 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* Add sub-frame to BAW */ @@ -1466,7 +1475,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + tx_info->control.vif; /* XXX: HACK! */ memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); @@ -1927,7 +1936,8 @@ static int ath_tx_start_dma(struct ath_softc *sc, bf->bf_flags = txctl->flags; bf->bf_keytype = txctl->keytype; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; bf->bf_rcs[0] = rcs[0]; bf->bf_rcs[1] = rcs[1]; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 098f886976f..6d65a02b705 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1387,13 +1387,11 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, info = IEEE80211_SKB_CB(meta->skb); - memset(&info->status, 0, sizeof(info->status)); - /* * Call back to inform the ieee80211 subsystem about * the status of the transmission. */ - frame_succeed = b43_fill_txstatus_report(info, status); + frame_succeed = b43_fill_txstatus_report(dev, info, status); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 9aeeb6553a9..2a599fb772d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4555,7 +4555,7 @@ static int b43_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_ADHOC); hw->queues = b43_modparam_qos ? 4 : 1; - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 40159126759..1036bef8c4c 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -587,9 +587,8 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev, spin_lock(&q->lock); /* IRQs are already disabled. */ info = IEEE80211_SKB_CB(pack->skb); - memset(&info->status, 0, sizeof(info->status)); - b43_fill_txstatus_report(info, status); + b43_fill_txstatus_report(dev, info, status); total_len = pack->skb->len + b43_txhdr_size(dev); total_len = roundup(total_len, 4); diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 2fabcf8f047..adba89b816d 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -185,7 +185,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u8 *_txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr; @@ -202,6 +202,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u16 phy_ctl = 0; u8 extra_ft = 0; struct ieee80211_rate *txrate; + struct ieee80211_tx_rate *rates; memset(txhdr, 0, sizeof(*txhdr)); @@ -291,7 +292,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, phy_ctl |= B43_TXH_PHY_ENC_OFDM; else phy_ctl |= B43_TXH_PHY_ENC_CCK; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43_TXH_PHY_SHORTPRMBL; switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) { @@ -314,6 +315,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, B43_WARN_ON(1); } + rates = info->control.rates; /* MAC control */ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43_TXH_MAC_ACK; @@ -324,12 +326,22 @@ int b43_generate_txhdr(struct b43_wldev *dev, mac_ctl |= B43_TXH_MAC_STMSDU; if (phy->type == B43_PHYTYPE_A) mac_ctl |= B43_TXH_MAC_5GHZ; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43_TXH_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate, rts_rate_fb; @@ -344,7 +356,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, rts_rate_fb = b43_calc_fallback_rate(rts_rate); rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb); - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { struct ieee80211_cts *cts; if (b43_is_old_txhdr_format(dev)) { @@ -687,10 +699,18 @@ void b43_handle_txstatus(struct b43_wldev *dev, /* Fill out the mac80211 TXstatus report based on the b43-specific * txstatus report data. This returns a boolean whether the frame was * successfully transmitted. */ -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status) { bool frame_success = 1; + int retry_limit; + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = report->status.rates[0].count; + ieee80211_tx_info_clear_status(report); if (status->acked) { /* The frame was ACKed. */ @@ -700,14 +720,32 @@ bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) { /* ...but we expected an ACK. */ frame_success = 0; - report->status.excessive_retries = 1; } } if (status->frame_count == 0) { /* The frame was not transmitted at all. */ - report->status.retry_count = 0; - } else - report->status.retry_count = status->frame_count - 1; + report->status.rates[0].count = 0; + } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + report->status.rates[0].count = 0; + report->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + report->status.rates[0].count = retry_limit; + report->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + report->status.rates[0].count = status->frame_count; + report->status.rates[1].idx = -1; + } + } return frame_success; } diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 0215faf4754..4fb2a190f7a 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -178,7 +178,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, u8 * txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *txctl, u16 cookie); + struct ieee80211_tx_info *txctl, u16 cookie); /* Transmit Status */ struct b43_txstatus { @@ -294,7 +294,8 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr); void b43_handle_txstatus(struct b43_wldev *dev, const struct b43_txstatus *status); -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status); void b43_tx_suspend(struct b43_wldev *dev); diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index fb6819e40f3..308c2647f00 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -1411,6 +1411,7 @@ void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev, struct b43legacy_dmaring *ring; struct b43legacy_dmadesc_generic *desc; struct b43legacy_dmadesc_meta *meta; + int retry_limit; int slot; ring = parse_cookie(dev, status->cookie, &slot); @@ -1437,25 +1438,42 @@ void b43legacy_dma_handle_txstatus(struct b43legacy_wldev *dev, struct ieee80211_tx_info *info; BUG_ON(!meta->skb); info = IEEE80211_SKB_CB(meta->skb); - /* Call back to inform the ieee80211 subsystem about the - * status of the transmission. - * Some fields of txstat are already filled in dma_tx(). - */ - memset(&info->status, 0, sizeof(info->status)); + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); - if (status->acked) { + if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; } else { - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) - info->status.excessive_retries = 1; + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } } - if (status->frame_count == 0) { - /* The frame was not transmitted at all. */ - info->status.retry_count = 0; - } else - info->status.retry_count = status->frame_count - - 1; + + /* Call back to inform the ieee80211 subsystem about the + * status of the transmission. + * Some fields of txstat are already filled in dma_tx(). + */ ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb); /* skb is freed by ieee80211_tx_status_irqsafe() */ meta->skb = NULL; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 78e46365f69..9edbdf9cb50 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3682,7 +3682,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c index a86c7647fa2..746d5361bba 100644 --- a/drivers/net/wireless/b43legacy/pio.c +++ b/drivers/net/wireless/b43legacy/pio.c @@ -491,6 +491,7 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev, struct b43legacy_pioqueue *queue; struct b43legacy_pio_txpacket *packet; struct ieee80211_tx_info *info; + int retry_limit; queue = parse_cookie(dev, status->cookie, &packet); B43legacy_WARN_ON(!queue); @@ -503,11 +504,37 @@ void b43legacy_pio_handle_txstatus(struct b43legacy_wldev *dev, sizeof(struct b43legacy_txhdr_fw3)); info = IEEE80211_SKB_CB(packet->skb); - memset(&info->status, 0, sizeof(info->status)); + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; - info->status.retry_count = status->frame_count - 1; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } + } ieee80211_tx_status_irqsafe(dev->wl->hw, packet->skb); packet->skb = NULL; diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 65e83378160..12fca99f757 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -188,7 +188,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, struct b43legacy_txhdr_fw3 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { const struct ieee80211_hdr *wlhdr; @@ -201,6 +201,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, u32 mac_ctl = 0; u16 phy_ctl = 0; struct ieee80211_rate *tx_rate; + struct ieee80211_tx_rate *rates; wlhdr = (const struct ieee80211_hdr *)fragment_data; @@ -274,7 +275,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, /* PHY TX Control word */ if (rate_ofdm) phy_ctl |= B43legacy_TX4_PHY_OFDM; - if (dev->short_preamble) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL; switch (info->antenna_sel_tx) { case 0: @@ -291,6 +292,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, } /* MAC control */ + rates = info->control.rates; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43legacy_TX4_MAC_ACK; if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) @@ -299,12 +301,22 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, mac_ctl |= B43legacy_TX4_MAC_STMSDU; if (rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43legacy_TX4_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate; @@ -319,7 +331,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, if (rts_rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_CTSFALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { ieee80211_ctstoself_get(dev->wl->hw, info->control.vif, fragment_data, @@ -362,7 +374,7 @@ int b43legacy_generate_txhdr(struct b43legacy_wldev *dev, u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { return generate_txhdr_fw3(dev, (struct b43legacy_txhdr_fw3 *)txhdr, diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h index e56777e0fea..62e09d02788 100644 --- a/drivers/net/wireless/b43legacy/xmit.h +++ b/drivers/net/wireless/b43legacy/xmit.h @@ -80,7 +80,7 @@ int b43legacy_generate_txhdr(struct b43legacy_wldev *dev, u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index c25daec4f93..f440ed0fe54 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -422,34 +422,6 @@ static void rs_free_sta(void *priv, struct ieee80211_sta *sta, } -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate) -{ - int next_rate = iwl3945_get_prev_ieee_rate(rate); - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - if (rate == IWL_RATE_12M_INDEX) - next_rate = IWL_RATE_9M_INDEX; - else if (rate == IWL_RATE_6M_INDEX) - next_rate = IWL_RATE_6M_INDEX; - break; -/* XXX cannot be invoked in current mac80211 so not a regression - case MODE_IEEE80211B: - if (rate == IWL_RATE_11M_INDEX_TABLE) - next_rate = IWL_RATE_5M_INDEX_TABLE; - break; - */ - default: - break; - } - - return next_rate; -} /** * rs_tx_status - Update rate control values based on Tx results * @@ -460,17 +432,21 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { - u8 retries, current_count; + u8 retries = 0, current_count; int scale_rate_index, first_index, last_index; unsigned long flags; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate; struct iwl3945_rs_sta *rs_sta = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int i; IWL_DEBUG_RATE("enter\n"); - retries = info->status.retry_count; - first_index = sband->bitrates[info->tx_rate_idx].hw_value; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + retries += info->status.rates[i].count; + retries--; + + first_index = sband->bitrates[info->status.rates[0].idx].hw_value; if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) { IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index); return; @@ -502,7 +478,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband last_index = scale_rate_index; } else { current_count = priv->retry_rate; - last_index = rs_adjust_next_rate(priv, + last_index = iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -518,7 +494,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband if (retries) scale_rate_index = - rs_adjust_next_rate(priv, scale_rate_index); + iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -630,10 +606,11 @@ static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, * rate table and must reference the driver allocated rate table * */ -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; u8 low = IWL_RATE_INVALID; u8 high = IWL_RATE_INVALID; u16 high_low; @@ -649,6 +626,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; u16 fc, rate_mask; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); @@ -659,7 +637,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -792,9 +770,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, rs_sta->last_txrate_idx = index; if (sband->band == IEEE80211_BAND_5GHZ) - sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE; + info->control.rates[0].idx = rs_sta->last_txrate_idx - + IWL_FIRST_OFDM_RATE; else - sel->rate_idx = rs_sta->last_txrate_idx; + info->control.rates[0].idx = rs_sta->last_txrate_idx; IWL_DEBUG_RATE("leave: %d\n", index); } diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 8a00245be51..7afafb62970 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -261,6 +261,35 @@ static inline const char *iwl3945_get_tx_fail_reason(u32 status) } #endif +/* + * get ieee prev rate from rate scale table. + * for A and B mode we need to overright prev + * value + */ +int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate) +{ + int next_rate = iwl3945_get_prev_ieee_rate(rate); + + switch (priv->band) { + case IEEE80211_BAND_5GHZ: + if (rate == IWL_RATE_12M_INDEX) + next_rate = IWL_RATE_9M_INDEX; + else if (rate == IWL_RATE_6M_INDEX) + next_rate = IWL_RATE_6M_INDEX; + break; +/* XXX cannot be invoked in current mac80211 so not a regression + case MODE_IEEE80211B: + if (rate == IWL_RATE_11M_INDEX_TABLE) + next_rate = IWL_RATE_5M_INDEX_TABLE; + break; + */ + default: + break; + } + + return next_rate; +} + /** * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd @@ -308,6 +337,7 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->status); int rate_idx; + int fail, i; if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) { IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " @@ -318,9 +348,36 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, } info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); + + /* Fill the MRR chain with some info about on-chip retransmissions */ + rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + + fail = tx_resp->failure_frame; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + int next = iwl3945_rs_next_rate(priv, rate_idx); + + info->status.rates[i].idx = rate_idx; + + /* + * Put remaining into the last count as best approximation + * of saying exactly what the hardware would have done... + */ + if ((rate_idx == next) || (i == IEEE80211_TX_MAX_RATES - 1)) { + info->status.rates[i].count = fail; + break; + } + + info->status.rates[i].count = priv->retry_rate; + fail -= priv->retry_rate; + rate_idx = next; + if (fail <= 0) + break; + } + info->status.rates[i].count++; /* add final attempt */ - info->status.retry_count = tx_resp->failure_frame; /* tx_status->rts_retry_count = tx_resp->failure_rts; */ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; @@ -329,10 +386,6 @@ static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv, txq_id, iwl3945_get_tx_fail_reason(status), status, tx_resp->rate, tx_resp->failure_frame); - rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - info->tx_rate_idx = rate_idx; IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); iwl3945_tx_queue_reclaim(priv, txq_id, index); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index bdd32475b99..592c5958723 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -954,6 +954,8 @@ static inline int is_channel_ibss(const struct iwl3945_channel_info *ch) extern const struct iwl3945_channel_info *iwl3945_get_channel_info( const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel); +extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate); + /* Requires full declaration of iwl3945_priv before including */ #include "iwl-3945-io.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9838de5f436..222c2baa95c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -619,10 +619,10 @@ static void iwl4965_gain_computation(struct iwl_priv *priv, static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { *tx_flags |= TX_CMD_FLG_RTS_MSK; *tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { *tx_flags &= ~TX_CMD_FLG_RTS_MSK; *tx_flags |= TX_CMD_FLG_CTS_MSK; } @@ -2070,7 +2070,7 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -2227,7 +2227,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 56a3f0c84a1..d5282fa6508 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -390,8 +390,8 @@ static void iwl5000_chain_noise_reset(struct iwl_priv *priv) static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; else *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK; @@ -1154,7 +1154,7 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -1307,7 +1307,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags = iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index e10e0ca09ce..f685e5d6c28 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -798,7 +798,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, !(info->flags & IEEE80211_TX_STAT_AMPDU)) return; - retries = info->status.retry_count; + retries = info->status.rates[0].count - 1; if (retries > 15) retries = 15; @@ -830,20 +830,15 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, if (priv->band == IEEE80211_BAND_5GHZ) rs_index -= IWL_FIRST_OFDM_RATE; - if ((info->tx_rate_idx < 0) || - (tbl_type.is_SGI ^ - !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || - (tbl_type.ant_type ^ info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || - (!!(tx_rate & RATE_MCS_GF_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || + if ((info->status.rates[0].idx < 0) || + (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) || + (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || + (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) || + (tbl_type.ant_type != info->antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) || + (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) || (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { + hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) { IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); goto out; } @@ -2098,15 +2093,17 @@ static void rs_initialize_lq(struct iwl_priv *priv, return; } -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { int i; + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct iwl_priv *priv = (struct iwl_priv *)priv_r; struct ieee80211_conf *conf = &priv->hw->conf; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); __le16 fc; struct iwl_lq_sta *lq_sta; @@ -2117,7 +2114,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, fc = hdr->frame_control; if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -2143,13 +2140,13 @@ static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, } if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } if (sband->band == IEEE80211_BAND_5GHZ) i -= IWL_FIRST_OFDM_RATE; - sel->rate_idx = i; + info->control.rates[0].idx = i; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 10f5a0a233f..2c4162e4814 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -88,26 +88,27 @@ EXPORT_SYMBOL(iwl_rates); * translate ucode response to mac80211 tx status control values */ void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_info *control) + struct ieee80211_tx_info *info) { int rate_index; + struct ieee80211_tx_rate *r = &info->control.rates[0]; - control->antenna_sel_tx = + info->antenna_sel_tx = ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); if (rate_n_flags & RATE_MCS_HT_MSK) - control->flags |= IEEE80211_TX_CTL_OFDM_HT; + r->flags |= IEEE80211_TX_RC_MCS; if (rate_n_flags & RATE_MCS_GF_MSK) - control->flags |= IEEE80211_TX_CTL_GREEN_FIELD; + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; if (rate_n_flags & RATE_MCS_FAT_MSK) - control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH; + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (rate_n_flags & RATE_MCS_DUP_MSK) - control->flags |= IEEE80211_TX_CTL_DUP_DATA; + r->flags |= IEEE80211_TX_RC_DUP_DATA; if (rate_n_flags & RATE_MCS_SGI_MSK) - control->flags |= IEEE80211_TX_CTL_SHORT_GI; + r->flags |= IEEE80211_TX_RC_SHORT_GI; rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags); - if (control->band == IEEE80211_BAND_5GHZ) + if (info->band == IEEE80211_BAND_5GHZ) rate_index -= IWL_FIRST_OFDM_RATE; - control->tx_rate_idx = rate_index; + r->idx = rate_index; } EXPORT_SYMBOL(iwl_hwrate_to_tx_control); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b1464c71ea0..2cd33b4e9e1 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2395,6 +2395,7 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, { __le16 fc = hdr->frame_control; __le32 tx_flags = cmd->cmd.tx.tx_flags; + u8 rc_flags = info->control.rates[0].flags; cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { @@ -2421,10 +2422,10 @@ static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv, tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= TX_CMD_FLG_RTS_MSK; tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags &= ~TX_CMD_FLG_RTS_MSK; tx_flags |= TX_CMD_FLG_CTS_MSK; } diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 241ddcfa352..d1fc305de5f 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -592,14 +592,14 @@ EXPORT_SYMBOL_GPL(lbtf_remove_card); void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); - memset(&info->status, 0, sizeof(info->status)); + + ieee80211_tx_info_clear_status(info); /* * Commented out, otherwise we never go beyond 1Mbit/s using mac80211 * default pid rc algorithm. * * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt; */ - info->status.excessive_retries = fail ? 1 : 0; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail) info->flags |= IEEE80211_TX_STAT_ACK; skb_pull(priv->tx_skb, sizeof(struct txpd)); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index e2aeef8de70..c5765232528 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -209,7 +209,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, /* TODO: set mactime */ rx_status.freq = data->channel->center_freq; rx_status.band = data->channel->band; - rx_status.rate_idx = info->tx_rate_idx; + rx_status.rate_idx = info->control.rates[0].idx; /* TODO: simulate signal strength (and optional packet drop) */ /* Copy skb to all enabled radios that are on the current frequency */ @@ -269,13 +269,9 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (txi->control.sta) hwsim_check_sta_magic(txi->control.sta); - memset(&txi->status, 0, sizeof(txi->status)); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (ack) - txi->flags |= IEEE80211_TX_STAT_ACK; - else - txi->status.excessive_retries = 1; - } + ieee80211_tx_info_clear_status(txi); + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack) + txi->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); return NETDEV_TX_OK; } diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 81a9756254f..65be5eca234 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -548,7 +548,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) spin_lock_irqsave(&priv->tx_queue.lock, flags); while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - range = (void *)info->driver_data; + range = (void *)info->rate_driver_data; if (range->start_addr == addr) { struct p54_control_hdr *entry_hdr; struct p54_tx_control_allocdata *entry_data; @@ -559,7 +559,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct memrecord *mr; ni = IEEE80211_SKB_CB(entry->next); - mr = (struct memrecord *)ni->driver_data; + mr = (struct memrecord *)ni->rate_driver_data; freed = mr->start_addr - last_addr; } else freed = priv->rx_end - last_addr; @@ -568,7 +568,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) @@ -578,10 +578,8 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (!(payload->status & 0x01)) info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; } - info->status.retry_count = payload->retries - 1; + info->status.rates[0].count = payload->retries; info->status.ack_signal = p54_rssi_to_dbm(dev, le16_to_cpu(payload->ack_rssi)); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); @@ -699,7 +697,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, while (left--) { u32 hole_size; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; hole_size = range->start_addr - last_addr; if (!target_skb && hole_size >= len) { target_skb = entry->prev; @@ -715,7 +713,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, largest_hole = max(largest_hole, priv->rx_end - last_addr - len); if (!skb_queue_empty(&priv->tx_queue)) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(target_skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; target_addr = range->end_addr; } } else @@ -723,7 +721,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, if (skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; range->start_addr = target_addr; range->end_addr = target_addr + len; __skb_queue_after(&priv->tx_queue, target_skb, skb); @@ -806,6 +804,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) size_t padding, len; u8 rate; u8 cts_rate = 0x20; + u8 rc_flags; current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4]; if (unlikely(current_queue->len > current_queue->limit)) @@ -828,18 +827,19 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) hdr->magic1 = cpu_to_le16(0x0010); hdr->len = cpu_to_le16(len); hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1); - hdr->retry1 = hdr->retry2 = info->control.retry_limit; + hdr->retry1 = hdr->retry2 = info->control.rates[0].count; /* TODO: add support for alternate retry TX rates */ rate = ieee80211_get_tx_rate(dev, info)->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { rate |= 0x10; cts_rate |= 0x10; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { rate |= 0x40; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { rate |= 0x20; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 697806cf94e..e1feab8b6b0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -498,7 +498,9 @@ void rt2x00lib_txdone(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + u8 rate_idx, rate_flags; /* * Unmap the skb. @@ -528,14 +530,18 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->link.qual.tx_failed += test_bit(TXDONE_FAILURE, &txdesc->flags); + rate_idx = skbdesc->tx_rate_idx; + rate_flags = skbdesc->tx_rate_flags; + /* * Initialize TX status */ memset(&tx_info->status, 0, sizeof(tx_info->status)); tx_info->status.ack_signal = 0; - tx_info->status.excessive_retries = - test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags); - tx_info->status.retry_count = txdesc->retry; + tx_info->status.rates[0].idx = rate_idx; + tx_info->status.rates[0].flags = rate_flags; + tx_info->status.rates[0].count = txdesc->retry + 1; + tx_info->status.rates[1].idx = -1; /* terminate */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) @@ -544,7 +550,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 931183369f0..b32d59eafaa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -39,7 +39,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, unsigned int data_length; int retval = 0; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) data_length = sizeof(struct ieee80211_cts); else data_length = sizeof(struct ieee80211_rts); @@ -64,11 +64,11 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; - rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; @@ -84,7 +84,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, data_length += rt2x00crypto_tx_overhead(tx_info); #endif /* CONFIG_RT2X00_LIB_CRYPTO */ - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); @@ -146,8 +146,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT)) && + if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | + IEEE80211_TX_RC_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) goto exit_fail; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 451d410ecda..070786ebd07 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -230,8 +230,15 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Determine retry information. */ - txdesc->retry_limit = tx_info->control.retry_limit; - if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + txdesc->retry_limit = tx_info->control.rates[0].count - 1; + /* + * XXX: If at this point we knew whether the HW is going to use + * the RETRY_MODE bit or the retry_limit (currently all + * use the RETRY_MODE bit) we could do something like b43 + * does, set the RETRY_MODE bit when the RC algorithm is + * requesting more than the long retry limit. + */ + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); /* @@ -371,10 +378,12 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info; struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; unsigned int iv_len = 0; + u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -399,13 +408,18 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len; /* - * All information is retreived from the skb->cb array, + * All information is retrieved from the skb->cb array, * now we should claim ownership of the driver part of that - * array. + * array, preserving the bitrate index and flags. */ + tx_info = IEEE80211_SKB_CB(skb); + rate_idx = tx_info->control.rates[0].idx; + rate_flags = tx_info->control.rates[0].flags; skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + skbdesc->tx_rate_idx = rate_idx; + skbdesc->tx_rate_flags = rate_flags; /* * When hardware encryption is supported, and this frame diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 9dbf04f0f04..4d3c7246f9a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -104,6 +104,8 @@ enum skb_frame_desc_flags { * * @flags: Frame flags, see &enum skb_frame_desc_flags. * @desc_len: Length of the frame descriptor. + * @tx_rate_idx: the index of the TX rate, used for TX status reporting + * @tx_rate_flags: the TX rate flags, used for TX status reporting * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. @@ -113,9 +115,12 @@ enum skb_frame_desc_flags { * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { - unsigned int flags; + u8 flags; + + u8 desc_len; + u8 tx_rate_idx; + u8 tx_rate_flags; - unsigned int desc_len; void *desc; __le32 iv; diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c index e8d22393797..6c226c024dd 100644 --- a/drivers/net/wireless/rtl8180_dev.c +++ b/drivers/net/wireless/rtl8180_dev.c @@ -182,15 +182,13 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) skb->len, PCI_DMA_TODEVICE); info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (flags & RTL818X_TX_DESC_FLAG_TX_OK) - info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; - } - info->status.retry_count = flags & 0xFF; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; ieee80211_tx_status_irqsafe(dev, skb); if (ring->entries - skb_queue_len(&ring->queue) == 2) @@ -243,6 +241,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) unsigned int idx, prio; dma_addr_t mapping; u32 tx_flags; + u8 rc_flags; u16 plcp_len = 0; __le16 rts_duration = 0; @@ -261,15 +260,16 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) tx_flags |= RTL818X_TX_DESC_FLAG_DMA | RTL818X_TX_DESC_FLAG_NO_ENC; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= RTL818X_TX_DESC_FLAG_RTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags |= RTL818X_TX_DESC_FLAG_CTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, info); @@ -292,9 +292,9 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.retries[0].rate_idx >= 0 ? + entry->flags2 = info->control.rates[1].idx >= 0 ? ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; - entry->retry_limit = info->control.retry_limit; + entry->retry_limit = info->control.rates[0].count; entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) @@ -855,7 +855,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, priv = dev->priv; priv->pdev = pdev; - dev->max_altrates = 1; + dev->max_rates = 2; SET_IEEE80211_DEV(dev, &pdev->dev); pci_set_drvdata(pdev, dev); diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index cd839bcb6d7..6260ed8ce12 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -160,13 +160,13 @@ static void rtl8187_tx_cb(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *)urb->context; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; struct rtl8187_priv *priv = hw->priv; - usb_free_urb(info->driver_data[1]); + usb_free_urb(info->rate_driver_data[1]); skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : sizeof(struct rtl8187_tx_hdr)); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); info->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); } @@ -194,12 +194,12 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -210,7 +210,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) hdr->flags = cpu_to_le32(flags); hdr->len = 0; hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); buf = hdr; ep = 2; @@ -228,7 +228,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) memset(hdr, 0, sizeof(*hdr)); hdr->flags = cpu_to_le32(flags); hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); hdr->tx_duration = ieee80211_generic_frame_duration(dev, priv->vif, skb->len, txrate); @@ -240,8 +240,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) ep = epmap[skb_get_queue_mapping(skb)]; } - info->driver_data[0] = dev; - info->driver_data[1] = urb; + info->rate_driver_data[0] = dev; + info->rate_driver_data[1] = urb; usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6c3e21887fc..2f0802b29c4 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -296,15 +296,14 @@ static void zd_op_stop(struct ieee80211_hw *hw) * If no status information has been requested, the skb is freed. */ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, - u32 flags, int ackssi, bool success) + int ackssi, bool success) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!success) - info->status.excessive_retries = 1; - info->flags |= flags; + if (success) + info->flags |= IEEE80211_TX_STAT_ACK; info->status.ack_signal = ackssi; ieee80211_tx_status_irqsafe(hw, skb); } @@ -326,7 +325,7 @@ void zd_mac_tx_failed(struct ieee80211_hw *hw) if (skb == NULL) return; - tx_status(hw, skb, 0, 0, 0); + tx_status(hw, skb, 0, 0); } /** @@ -342,12 +341,12 @@ void zd_mac_tx_failed(struct ieee80211_hw *hw) void zd_mac_tx_to_dev(struct sk_buff *skb, int error) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; skb_pull(skb, sizeof(struct zd_ctrlset)); if (unlikely(error || (info->flags & IEEE80211_TX_CTL_NO_ACK))) { - tx_status(hw, skb, 0, 0, !error); + tx_status(hw, skb, 0, !error); } else { struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue; @@ -406,7 +405,8 @@ static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) } static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, - struct ieee80211_hdr *header, u32 flags) + struct ieee80211_hdr *header, + struct ieee80211_tx_info *info) { /* * CONTROL TODO: @@ -417,7 +417,7 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, cs->control = 0; /* First fragment */ - if (flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; /* Multicast */ @@ -428,10 +428,10 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, if (ieee80211_is_pspoll(header->frame_control)) cs->control |= ZD_CS_PS_POLL_FRAME; - if (flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) cs->control |= ZD_CS_RTS; - if (flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) cs->control |= ZD_CS_SELF_CTS; /* FIXME: Management frame? */ @@ -517,12 +517,12 @@ static int fill_ctrlset(struct zd_mac *mac, txrate = ieee80211_get_tx_rate(mac->hw, info); cs->modulation = txrate->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) cs->modulation = txrate->hw_value_short; cs->tx_length = cpu_to_le16(frag_len); - cs_set_control(mac, cs, hdr, info->flags); + cs_set_control(mac, cs, hdr, info); packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; ZD_ASSERT(packet_length <= 0xffff); @@ -577,7 +577,7 @@ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (r) return r; - info->driver_data[0] = hw; + info->rate_driver_data[0] = hw; r = zd_usb_tx(&mac->chip.usb, skb); if (r) @@ -618,7 +618,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) { __skb_unlink(skb, q); - tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); + tx_status(hw, skb, stats->signal, 1); goto out; } } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index a60ae86bd5c..d7a2f52e40c 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -907,7 +907,7 @@ free_urb: * it might be freed by zd_mac_tx_to_dev or mac80211) */ info = IEEE80211_SKB_CB(skb); - usb = &zd_hw_mac(info->driver_data[0])->chip.usb; + usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb; zd_mac_tx_to_dev(skb, urb->status); free_tx_urb(usb, urb); tx_dec_submitted_urbs(usb); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9801afb6254..3741c0a7978 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -214,29 +214,24 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons and always be clear for frames without a sequence number field. * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination * station - * @IEEE80211_TX_CTL_REQUEUE: TBD * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD - * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long retry value * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted from antenna_sel_tx, - * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n - * antennas marked use MIMO_n. - * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval - * @IEEE80211_TX_CTL_INJECTED: TBD + * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged @@ -244,62 +239,70 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). - * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence - * number to this frame, taking care of not overwriting the fragment - * number and increasing the sequence number only when the - * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly - * assign sequence numbers to QoS-data frames but cannot do so correctly - * for non-QoS-data and management frames because beacons need them from - * that counter as well and mac80211 cannot guarantee proper sequencing. - * If this flag is set, the driver should instruct the hardware to - * assign a sequence number to the frame or assign one itself. Cf. IEEE - * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for - * beacons always be clear for frames without a sequence number field. + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be + * set by rate control algorithms to indicate probe rate, will + * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_CTL_REQUEUE: REMOVE THIS */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), - IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), - IEEE80211_TX_CTL_NO_ACK = BIT(4), - IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), - IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), - IEEE80211_TX_CTL_REQUEUE = BIT(7), - IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), - IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), - IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), - IEEE80211_TX_CTL_AMPDU = BIT(13), - IEEE80211_TX_CTL_OFDM_HT = BIT(14), - IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), - IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), - IEEE80211_TX_CTL_DUP_DATA = BIT(17), - IEEE80211_TX_CTL_SHORT_GI = BIT(18), - IEEE80211_TX_CTL_INJECTED = BIT(19), - IEEE80211_TX_STAT_TX_FILTERED = BIT(20), - IEEE80211_TX_STAT_ACK = BIT(21), - IEEE80211_TX_STAT_AMPDU = BIT(22), - IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), - IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), + IEEE80211_TX_CTL_NO_ACK = BIT(2), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5), + IEEE80211_TX_CTL_AMPDU = BIT(6), + IEEE80211_TX_CTL_INJECTED = BIT(7), + IEEE80211_TX_STAT_TX_FILTERED = BIT(8), + IEEE80211_TX_STAT_ACK = BIT(9), + IEEE80211_TX_STAT_AMPDU = BIT(10), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + + /* XXX: remove this */ + IEEE80211_TX_CTL_REQUEUE = BIT(13), }; +enum mac80211_rate_control_flags { + IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), + IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), + IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an MCS rate number instead of an index */ + IEEE80211_TX_RC_MCS = BIT(3), + IEEE80211_TX_RC_GREEN_FIELD = BIT(4), + IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), + IEEE80211_TX_RC_DUP_DATA = BIT(6), + IEEE80211_TX_RC_SHORT_GI = BIT(7), +}; + + +/* there are 40 bytes if you don't need the rateset to be kept */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40 -#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ - (sizeof(((struct sk_buff *)0)->cb) - 8) -#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ - (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) +/* if you do need the rateset, then you have less space */ +#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24 -/* maximum number of alternate rate retry stages */ -#define IEEE80211_TX_MAX_ALTRATE 3 +/* maximum number of rate stages */ +#define IEEE80211_TX_MAX_RATES 5 /** - * struct ieee80211_tx_altrate - alternate rate selection/status + * struct ieee80211_tx_rate - rate selection/status * - * @rate_idx: rate index to attempt to send with + * @idx: rate index to attempt to send with + * @flags: rate control flags (&enum mac80211_rate_control_flags) * @limit: number of retries before fallback + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate along with the flags it used. */ -struct ieee80211_tx_altrate { - s8 rate_idx; - u8 limit; +struct ieee80211_tx_rate { + s8 idx; + u8 count; + u8 flags; }; /** @@ -314,15 +317,12 @@ struct ieee80211_tx_altrate { * it may be NULL. * * @flags: transmit info flags, defined above - * @band: TBD - * @tx_rate_idx: TBD + * @band: the band to transmit on (use for checking for races) * @antenna_sel_tx: antenna to use, 0 for automatic diversity * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. @@ -333,31 +333,43 @@ struct ieee80211_tx_info { /* common information */ u32 flags; u8 band; - s8 tx_rate_idx; + u8 antenna_sel_tx; - /* 1 byte hole */ + /* 2 byte hole */ union { struct { + union { + /* rate control */ + struct { + struct ieee80211_tx_rate rates[ + IEEE80211_TX_MAX_RATES]; + s8 rts_cts_rate_idx; + }; + /* only needed before rate control */ + unsigned long jiffies; + }; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; struct ieee80211_sta *sta; - unsigned long jiffies; - s8 rts_cts_rate_idx; - u8 retry_limit; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE]; } control; struct { + struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; + u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1]; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; + /* 8 bytes free */ } status; - void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + struct { + struct ieee80211_tx_rate driver_rates[ + IEEE80211_TX_MAX_RATES]; + void *rate_driver_data[ + IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; + }; + void *driver_data[ + IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)]; }; }; @@ -366,6 +378,41 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) return (struct ieee80211_tx_info *)skb->cb; } +/** + * ieee80211_tx_info_clear_status - clear TX status + * + * @info: The &struct ieee80211_tx_info to be cleared. + * + * When the driver passes an skb back to mac80211, it must report + * a number of things in TX status. This function clears everything + * in the TX status but the rate control information (it does clear + * the count since you need to fill that in anyway). + * + * NOTE: You can only use this function if you do NOT use + * info->driver_data! Use info->rate_driver_data + * instead if you need only the less space that allows. + */ +static inline void +ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) +{ + int i; + + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, control.rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); + /* clear the rate counts */ + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + info->status.rates[i].count = 0; + + BUILD_BUG_ON( + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23); + memset(&info->status.ampdu_ack_len, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); +} + /** * enum mac80211_rx_flags - receive flags @@ -869,8 +916,8 @@ enum ieee80211_hw_flags { * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. * - * @max_altrates: maximum number of alternate rate retry stages - * @max_altrate_tries: maximum number of tries for each stage + * @max_rates: maximum number of alternate rate retry stages + * @max_rate_tries: maximum number of tries for each stage */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -887,8 +934,8 @@ struct ieee80211_hw { u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; - u8 max_altrates; - u8 max_altrate_tries; + u8 max_rates; + u8 max_rate_tries; }; /** @@ -927,9 +974,9 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->tx_rate_idx < 0)) + if (WARN_ON(c->control.rates[0].idx < 0)) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } static inline struct ieee80211_rate * @@ -945,9 +992,9 @@ static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c, int idx) { - if (c->control.retries[idx].rate_idx < 0) + if (c->control.rates[idx + 1].idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx]; } /** @@ -1840,17 +1887,30 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, /* Rate control API */ + /** - * struct rate_selection - rate information for/from rate control algorithms - * - * @rate_idx: selected transmission rate index - * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used - * @probe_idx: rate for probing (or -1) - * @max_rate_idx: maximum rate index that can be used, this is - * input to the algorithm and will be enforced - */ -struct rate_selection { - s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx; + * struct ieee80211_tx_rate_control - rate control information for/from RC algo + * + * @hw: The hardware the algorithm is invoked for. + * @sband: The band this frame is being transmitted on. + * @bss_conf: the current BSS configuration + * @reported_rate: The rate control algorithm can fill this in to indicate + * which rate should be reported to userspace as the current rate and + * used for rate calculations in the mesh network. + * @rts: whether RTS will be used for this frame because it is longer than the + * RTS threshold + * @short_preamble: whether mac80211 will request short-preamble transmission + * if the selected rate supports it + * @max_rate_idx: user-requested maximum rate (not MCS for now) + */ +struct ieee80211_tx_rate_control { + struct ieee80211_hw *hw; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_conf *bss_conf; + struct sk_buff *skb; + struct ieee80211_tx_rate reported_rate; + bool rts, short_preamble; + u8 max_rate_idx; }; struct rate_control_ops { @@ -1869,10 +1929,8 @@ struct rate_control_ops { void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb); - void (*get_rate)(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel); + void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc); void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6f8756d26a9..fe4efdd4253 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -142,7 +142,6 @@ typedef unsigned __bitwise__ ieee80211_tx_result; #define IEEE80211_TX_FRAGMENTED BIT(0) #define IEEE80211_TX_UNICAST BIT(1) #define IEEE80211_TX_PS_BUFFERED BIT(2) -#define IEEE80211_TX_PROBE_LAST_FRAG BIT(3) struct ieee80211_tx_data { struct sk_buff *skb; @@ -153,11 +152,6 @@ struct ieee80211_tx_data { struct ieee80211_key *key; struct ieee80211_channel *channel; - s8 rate_idx; - /* use this rate (if set) for last fragment; rate can - * be set to lower rate for the first fragments, e.g., - * when using CTS protection with IEEE 802.11g. */ - s8 last_frag_rate_idx; /* Extra fragments (in addition to the first fragment * in skb) */ @@ -203,9 +197,7 @@ struct ieee80211_rx_data { struct ieee80211_tx_stored_packet { struct sk_buff *skb; struct sk_buff **extra_frag; - s8 last_frag_rate_idx; int num_extra_frag; - bool last_frag_rate_ctrl_probe; }; struct beacon_data { diff --git a/net/mac80211/main.c b/net/mac80211/main.c index ffff54944f9..88c1975a97a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -41,6 +41,8 @@ */ struct ieee80211_tx_status_rtap_hdr { struct ieee80211_radiotap_header hdr; + u8 rate; + u8 padding_for_rate; __le16 tx_flags; u8 data_retries; } __attribute__ ((packed)); @@ -465,13 +467,28 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_sub_if_data *sdata; struct net_device *prev_dev = NULL; struct sta_info *sta; + int retry_count = -1, i; + + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* the HW cannot have attempted that rate */ + if (i >= hw->max_rates) { + info->status.rates[i].idx = -1; + info->status.rates[i].count = 0; + } + + retry_count += info->status.rates[i].count; + } + if (retry_count < 0) + retry_count = 0; rcu_read_lock(); + sband = local->hw.wiphy->bands[info->band]; + sta = sta_info_get(local, hdr->addr1); if (sta) { - if (info->status.excessive_retries && + if (!(info->flags & IEEE80211_TX_STAT_ACK) && test_sta_flags(sta, WLAN_STA_PS)) { /* * The STA is in power save mode, so assume @@ -502,12 +519,11 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) rcu_read_unlock(); return; } else { - if (info->status.excessive_retries) + if (!(info->flags & IEEE80211_TX_STAT_ACK)) sta->tx_retry_failed++; - sta->tx_retry_count += info->status.retry_count; + sta->tx_retry_count += retry_count; } - sband = local->hw.wiphy->bands[info->band]; rate_control_tx_status(local, sband, sta, skb); } @@ -528,9 +544,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) local->dot11TransmittedFrameCount++; if (is_multicast_ether_addr(hdr->addr1)) local->dot11MulticastTransmittedFrameCount++; - if (info->status.retry_count > 0) + if (retry_count > 0) local->dot11RetryCount++; - if (info->status.retry_count > 1) + if (retry_count > 1) local->dot11MultipleRetryCount++; } @@ -574,19 +590,30 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); rthdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | - (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); + (1 << IEEE80211_RADIOTAP_DATA_RETRIES) | + (1 << IEEE80211_RADIOTAP_RATE)); if (!(info->flags & IEEE80211_TX_STAT_ACK) && !is_multicast_ether_addr(hdr->addr1)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) && - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + /* + * XXX: Once radiotap gets the bitmap reset thing the vendor + * extensions proposal contains, we can actually report + * the whole set of tries we did. + */ + if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); - else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + if (info->status.rates[0].idx >= 0 && + !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) + rthdr->rate = sband->bitrates[ + info->status.rates[0].idx].bitrate / 5; - rthdr->data_retries = info->status.retry_count; + /* for now report the total retry_count */ + rthdr->data_retries = retry_count; /* XXX: is this sufficient for BPF? */ skb_set_mac_header(skb, 0); @@ -671,8 +698,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, BUG_ON(!ops->configure_filter); local->ops = ops; - local->hw.queues = 1; /* default */ - + /* set up some defaults */ + local->hw.queues = 1; + local->hw.max_rates = 1; local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; local->hw.conf.long_frame_max_tx_count = 4; diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 501c7831adb..e8d573d592e 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -218,12 +218,16 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, if (sta->fail_avg >= 100) return MAX_METRIC; + + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS) + return MAX_METRIC; + err = (sta->fail_avg << ARITH_SHIFT) / 100; /* bitrate is in units of 100 Kbps, while we need rate in units of * 1Mbps. This will be corrected on tx_time computation. */ - rate = sband->bitrates[sta->last_txrate_idx].bitrate; + rate = sband->bitrates[sta->last_tx_rate.idx].bitrate; tx_time = (device_constant + 10 * test_frame_len / rate); estimated_retx = ((1 << (2 * ARITH_SHIFT)) / (s_unit - err)); result = (tx_time * estimated_retx) >> (2 * ARITH_SHIFT) ; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 5d786720d93..3fa7ab28506 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -199,48 +199,44 @@ static void rate_control_release(struct kref *kref) } void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel) + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc) { struct rate_control_ref *ref = sdata->local->rate_ctrl; void *priv_sta = NULL; struct ieee80211_sta *ista = NULL; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); int i; - sel->rate_idx = -1; - sel->nonerp_idx = -1; - sel->probe_idx = -1; - sel->max_rate_idx = sdata->max_ratectrl_rateidx; - if (sta) { ista = &sta->sta; priv_sta = sta->rate_ctrl_priv; } + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + info->control.rates[i].idx = -1; + info->control.rates[i].flags = 0; + info->control.rates[i].count = 1; + } + if (sta && sdata->force_unicast_rateidx > -1) - sel->rate_idx = sdata->force_unicast_rateidx; + info->control.rates[0].idx = sdata->force_unicast_rateidx; else - ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel); - - if (sdata->max_ratectrl_rateidx > -1 && - sel->rate_idx > sdata->max_ratectrl_rateidx) - sel->rate_idx = sdata->max_ratectrl_rateidx; - - BUG_ON(sel->rate_idx < 0); - - /* Select a non-ERP backup rate. */ - if (sel->nonerp_idx < 0) { - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *rate = &sband->bitrates[i]; - if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate) - break; - - if (rate_supported(ista, sband->band, i) && - !(rate->flags & IEEE80211_RATE_ERP_G)) - sel->nonerp_idx = i; - } + ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); + + /* + * try to enforce the maximum rate the user wanted + */ + if (sdata->max_ratectrl_rateidx > -1) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) + continue; + info->control.rates[i].idx = + min_t(s8, info->control.rates[i].idx, + sdata->max_ratectrl_rateidx); } + + BUG_ON(info->control.rates[0].idx < 0); } struct rate_control_ref *rate_control_get(struct rate_control_ref *ref) diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index d0092f847f8..7c25edf9ac5 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -31,9 +31,8 @@ struct rate_control_ref { struct rate_control_ref *rate_control_alloc(const char *name, struct ieee80211_local *local); void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel); + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc); struct rate_control_ref *rate_control_get(struct rate_control_ref *ref); void rate_control_put(struct rate_control_ref *ref); diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index f6d69dab07a..759ddd8bf0f 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -169,30 +169,20 @@ minstrel_tx_status(void *priv, struct ieee80211_supported_band *sband, { struct minstrel_sta_info *mi = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_altrate *ar = info->status.retries; - struct minstrel_priv *mp = priv; - int i, ndx, tries; - int success = 0; + struct ieee80211_tx_rate *ar = info->status.rates; + int i, ndx; + int success; - if (!info->status.excessive_retries) - success = 1; + success = !!(info->flags & IEEE80211_TX_STAT_ACK); - if (!mp->has_mrr || (ar[0].rate_idx < 0)) { - ndx = rix_to_ndx(mi, info->tx_rate_idx); - tries = info->status.retry_count + 1; - mi->r[ndx].success += success; - mi->r[ndx].attempts += tries; - return; - } - - for (i = 0; i < 4; i++) { - if (ar[i].rate_idx < 0) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (ar[i].idx < 0) break; - ndx = rix_to_ndx(mi, ar[i].rate_idx); - mi->r[ndx].attempts += ar[i].limit + 1; + ndx = rix_to_ndx(mi, ar[i].idx); + mi->r[ndx].attempts += ar[i].count; - if ((i != 3) && (ar[i + 1].rate_idx < 0)) + if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0)) mi->r[ndx].success += success; } @@ -210,9 +200,9 @@ minstrel_get_retry_count(struct minstrel_rate *mr, { unsigned int retry = mr->adjusted_retry_count; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) retry = max(2U, min(mr->retry_count_rtscts, retry)); - else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) retry = max(2U, min(mr->retry_count_cts, retry)); return retry; } @@ -234,14 +224,15 @@ minstrel_get_next_sample(struct minstrel_sta_info *mi) } void -minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +minstrel_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct minstrel_sta_info *mi = priv_sta; struct minstrel_priv *mp = priv; - struct ieee80211_tx_altrate *ar = info->control.retries; + struct ieee80211_tx_rate *ar = info->control.rates; unsigned int ndx, sample_ndx = 0; bool mrr; bool sample_slower = false; @@ -251,16 +242,12 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, int sample_rate; if (!sta || !mi || use_low_rate(skb)) { - sel->rate_idx = rate_lowest_index(sband, sta); + ar[0].idx = rate_lowest_index(sband, sta); + ar[0].count = mp->max_retry; return; } - mrr = mp->has_mrr; - - /* mac80211 does not allow mrr for RTS/CTS */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) - mrr = false; + mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot; if (time_after(jiffies, mi->stats_update + (mp->update_interval * HZ) / 1000)) @@ -315,13 +302,12 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, mi->sample_deferred++; } } - sel->rate_idx = mi->r[ndx].rix; - info->control.retry_limit = minstrel_get_retry_count(&mi->r[ndx], info); + ar[0].idx = mi->r[ndx].rix; + ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info); if (!mrr) { - ar[0].rate_idx = mi->lowest_rix; - ar[0].limit = mp->max_retry; - ar[1].rate_idx = -1; + ar[1].idx = mi->lowest_rix; + ar[1].count = mp->max_retry; return; } @@ -336,9 +322,9 @@ minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, } mrr_ndx[1] = mi->max_prob_rate; mrr_ndx[2] = 0; - for (i = 0; i < 3; i++) { - ar[i].rate_idx = mi->r[mrr_ndx[i]].rix; - ar[i].limit = mi->r[mrr_ndx[i]].adjusted_retry_count; + for (i = 1; i < 4; i++) { + ar[i].idx = mi->r[mrr_ndx[i - 1]].rix; + ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count; } } @@ -532,13 +518,13 @@ minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) /* maximum time that the hw is allowed to stay in one MRR segment */ mp->segment_size = 6000; - if (hw->max_altrate_tries > 0) - mp->max_retry = hw->max_altrate_tries; + if (hw->max_rate_tries > 0) + mp->max_retry = hw->max_rate_tries; else /* safe default, does not necessarily have to match hw properties */ mp->max_retry = 7; - if (hw->max_altrates >= 3) + if (hw->max_rates >= 4) mp->has_mrr = true; mp->hw = hw; diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h index ce099ea1d5d..1a873f00691 100644 --- a/net/mac80211/rc80211_pid.h +++ b/net/mac80211/rc80211_pid.h @@ -61,6 +61,7 @@ enum rc_pid_event_type { union rc_pid_event_data { /* RC_PID_EVENT_TX_STATUS */ struct { + u32 flags; struct ieee80211_tx_info tx_status; }; /* RC_PID_EVENT_TYPE_RATE_CHANGE */ diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index 86eb374e3b8..92caecfcee7 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -241,7 +241,7 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba /* Ignore all frames that were sent with a different rate than the rate * we currently advise mac80211 to use. */ - if (info->tx_rate_idx != spinfo->txrate_idx) + if (info->status.rates[0].idx != spinfo->txrate_idx) return; spinfo->tx_num_xmit++; @@ -253,10 +253,10 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba /* We count frames that totally failed to be transmitted as two bad * frames, those that made it out but had some retries as one good and * one bad frame. */ - if (info->status.excessive_retries) { + if (!(info->flags & IEEE80211_TX_STAT_ACK)) { spinfo->tx_num_failed += 2; spinfo->tx_num_xmit++; - } else if (info->status.retry_count) { + } else if (info->status.rates[0].count) { spinfo->tx_num_failed++; spinfo->tx_num_xmit++; } @@ -270,23 +270,32 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba } static void -rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel) +rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct rc_pid_sta_info *spinfo = priv_sta; int rateidx; u16 fc; + if (txrc->rts) + info->control.rates[0].count = + txrc->hw->conf.long_frame_max_tx_count; + else + info->control.rates[0].count = + txrc->hw->conf.short_frame_max_tx_count; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); if (!sta || !spinfo || (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || is_multicast_ether_addr(hdr->addr1)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -295,7 +304,7 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, if (rateidx >= sband->n_bitrates) rateidx = sband->n_bitrates - 1; - sel->rate_idx = rateidx; + info->control.rates[0].idx = rateidx; #ifdef CONFIG_MAC80211_DEBUGFS rate_control_pid_event_tx_rate(&spinfo->events, diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c index 8121d3bc683..a08a9b53034 100644 --- a/net/mac80211/rc80211_pid_debugfs.c +++ b/net/mac80211/rc80211_pid_debugfs.c @@ -43,6 +43,7 @@ void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf, { union rc_pid_event_data evd; + evd.flags = stat->flags; memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info)); rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd); } @@ -167,8 +168,8 @@ static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf, switch (ev->type) { case RC_PID_EVENT_TYPE_TX_STATUS: p += snprintf(pb + p, length - p, "tx_status %u %u", - ev->data.tx_status.status.excessive_retries, - ev->data.tx_status.status.retry_count); + !(ev->data.flags & IEEE80211_TX_STAT_ACK), + ev->data.tx_status.status.rates[0].idx); break; case RC_PID_EVENT_TYPE_RATE_CHANGE: p += snprintf(pb + p, length - p, "rate_change %d %d", diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 168a39a298b..4ac372aa75c 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -196,7 +196,7 @@ struct sta_ampdu_mlme { * @tx_packets: number of RX/TX MSDUs * @tx_bytes: TBD * @tx_fragments: number of transmitted MPDUs - * @last_txrate_idx: Index of the last used transmit rate + * @last_txrate: description of the last used transmit rate * @tid_seq: TBD * @ampdu_mlme: TBD * @timer_to_tid: identity mapping to ID timers @@ -267,7 +267,7 @@ struct sta_info { unsigned long tx_packets; unsigned long tx_bytes; unsigned long tx_fragments; - unsigned int last_txrate_idx; + struct ieee80211_tx_rate last_tx_rate; u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; /* diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 6f3e4be9763..21951bac1ef 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -46,13 +46,20 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr, struct ieee80211_local *local = tx->local; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + + /* assume HW handles this */ + if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) + return 0; + + /* uh huh? */ + if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) + return 0; sband = local->hw.wiphy->bands[tx->channel->band]; - txrate = &sband->bitrates[tx->rate_idx]; + txrate = &sband->bitrates[info->control.rates[0].idx]; - erp = 0; - if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) - erp = txrate->flags & IEEE80211_RATE_ERP_G; + erp = txrate->flags & IEEE80211_RATE_ERP_G; /* * data and mgmt (except PS Poll): @@ -437,140 +444,154 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) static ieee80211_tx_result debug_noinline ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) { - struct rate_selection rsel; - struct ieee80211_supported_band *sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + struct ieee80211_hdr *hdr = (void *)tx->skb->data; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, len; + bool inval = false, rts = false, short_preamble = false; + struct ieee80211_tx_rate_control txrc; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + memset(&txrc, 0, sizeof(txrc)); - if (likely(tx->rate_idx < 0)) { - rate_control_get_rate(tx->sdata, sband, tx->sta, - tx->skb, &rsel); - if (tx->sta) - tx->sta->last_txrate_idx = rsel.rate_idx; - tx->rate_idx = rsel.rate_idx; - if (unlikely(rsel.probe_idx >= 0)) { - info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - info->control.retries[0].rate_idx = tx->rate_idx; - info->control.retries[0].limit = tx->local->hw.max_altrate_tries; - tx->rate_idx = rsel.probe_idx; - } else if (info->control.retries[0].limit == 0) - info->control.retries[0].rate_idx = -1; - - if (unlikely(tx->rate_idx < 0)) - return TX_DROP; - } else - info->control.retries[0].rate_idx = -1; + sband = tx->local->hw.wiphy->bands[tx->channel->band]; - if (tx->sdata->vif.bss_conf.use_cts_prot && - (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) { - tx->last_frag_rate_idx = tx->rate_idx; - if (rsel.probe_idx >= 0) - tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG; - else - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - tx->rate_idx = rsel.nonerp_idx; - info->tx_rate_idx = rsel.nonerp_idx; - info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } else { - tx->last_frag_rate_idx = tx->rate_idx; - info->tx_rate_idx = tx->rate_idx; + len = min_t(int, tx->skb->len + FCS_LEN, + tx->local->fragmentation_threshold); + + /* set up the tx rate control struct we give the RC algo */ + txrc.hw = local_to_hw(tx->local); + txrc.sband = sband; + txrc.bss_conf = &tx->sdata->vif.bss_conf; + txrc.skb = tx->skb; + txrc.reported_rate.idx = -1; + txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; + + /* set up RTS protection if desired */ + if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD && + len > tx->local->rts_threshold) { + txrc.rts = rts = true; } - info->tx_rate_idx = tx->rate_idx; - return TX_CONTINUE; -} + /* + * Use short preamble if the BSS can handle it, but not for + * management frames unless we know the receiver can handle + * that -- the management frame might be to a station that + * just wants a probe response. + */ + if (tx->sdata->vif.bss_conf.use_short_preamble && + (ieee80211_is_data(hdr->frame_control) || + (tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) + txrc.short_preamble = short_preamble = true; -static ieee80211_tx_result debug_noinline -ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); - struct ieee80211_supported_band *sband; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + rate_control_get_rate(tx->sdata, tx->sta, &txrc); + + if (unlikely(info->control.rates[0].idx < 0)) + return TX_DROP; + + if (txrc.reported_rate.idx < 0) + txrc.reported_rate = info->control.rates[0]; if (tx->sta) - info->control.sta = &tx->sta->sta; + tx->sta->last_tx_rate = txrc.reported_rate; - if (!info->control.retry_limit) { - if (!is_multicast_ether_addr(hdr->addr1)) { - int len = min_t(int, tx->skb->len + FCS_LEN, - tx->local->fragmentation_threshold); - if (len > tx->local->rts_threshold - && tx->local->rts_threshold < - IEEE80211_MAX_RTS_THRESHOLD) { - info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS; - info->flags |= - IEEE80211_TX_CTL_LONG_RETRY_LIMIT; - info->control.retry_limit = - tx->local->hw.conf.long_frame_max_tx_count - 1; - } else { - info->control.retry_limit = - tx->local->hw.conf.short_frame_max_tx_count - 1; - } - } else { - info->control.retry_limit = 1; - } - } + if (unlikely(!info->control.rates[0].count)) + info->control.rates[0].count = 1; - if (tx->flags & IEEE80211_TX_FRAGMENTED) { - /* Do not use multiple retry rates when sending fragmented - * frames. - * TODO: The last fragment could still use multiple retry - * rates. */ - info->control.retries[0].rate_idx = -1; + if (is_multicast_ether_addr(hdr->addr1)) { + /* + * XXX: verify the rate is in the basic rateset + */ + return TX_CONTINUE; } - /* Use CTS protection for unicast frames sent using extended rates if - * there are associated non-ERP stations and RTS/CTS is not configured - * for the frame. */ - if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) && - (tx->flags & IEEE80211_TX_UNICAST) && - tx->sdata->vif.bss_conf.use_cts_prot && - !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)) - info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT; - - /* Transmit data frames using short preambles if the driver supports - * short preambles at the selected rate and short preambles are - * available on the network at the current point in time. */ - if (ieee80211_is_data(hdr->frame_control) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) && - tx->sdata->vif.bss_conf.use_short_preamble && - (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) { - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; + /* + * set up the RTS/CTS rate as the fastest basic rate + * that is not faster than the data rate + * + * XXX: Should this check all retry rates? + */ + if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { + s8 baserate = 0; + + rate = &sband->bitrates[info->control.rates[0].idx]; + + for (i = 0; i < sband->n_bitrates; i++) { + /* must be a basic rate */ + if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i))) + continue; + /* must not be faster than the data rate */ + if (sband->bitrates[i].bitrate > rate->bitrate) + continue; + /* maximum */ + if (sband->bitrates[baserate].bitrate < + sband->bitrates[i].bitrate) + baserate = i; + } + + info->control.rts_cts_rate_idx = baserate; } - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { - struct ieee80211_rate *rate; - s8 baserate = -1; - int idx; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* + * make sure there's no valid rate following + * an invalid one, just in case drivers don't + * take the API seriously to stop at -1. + */ + if (inval) { + info->control.rates[i].idx = -1; + continue; + } + if (info->control.rates[i].idx < 0) { + inval = true; + continue; + } - /* Do not use multiple retry rates when using RTS/CTS */ - info->control.retries[0].rate_idx = -1; + /* + * For now assume MCS is already set up correctly, this + * needs to be fixed. + */ + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) { + WARN_ON(info->control.rates[i].idx > 76); + continue; + } - /* Use min(data rate, max base rate) as CTS/RTS rate */ - rate = &sband->bitrates[tx->rate_idx]; + /* set up RTS protection if desired */ + if (rts) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_RTS_CTS; - for (idx = 0; idx < sband->n_bitrates; idx++) { - if (sband->bitrates[idx].bitrate > rate->bitrate) - continue; - if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) && - (baserate < 0 || - (sband->bitrates[baserate].bitrate - < sband->bitrates[idx].bitrate))) - baserate = idx; + /* RC is busted */ + if (WARN_ON(info->control.rates[i].idx >= + sband->n_bitrates)) { + info->control.rates[i].idx = -1; + continue; } - if (baserate >= 0) - info->control.rts_cts_rate_idx = baserate; - else - info->control.rts_cts_rate_idx = 0; + rate = &sband->bitrates[info->control.rates[i].idx]; + + /* set up short preamble */ + if (short_preamble && + rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_SHORT_PREAMBLE; + + /* set up G protection */ + if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && + rate->flags & IEEE80211_RATE_ERP_G) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_CTS_PROTECT; } + return TX_CONTINUE; +} + +static ieee80211_tx_result debug_noinline +ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + if (tx->sta) info->control.sta = &tx->sta->sta; @@ -678,6 +699,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) left = payload_len - per_fragm; for (i = 0; i < num_fragm - 1; i++) { struct ieee80211_hdr *fhdr; + struct ieee80211_tx_info *info; size_t copylen; if (left <= 0) @@ -692,20 +714,45 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) IEEE80211_ENCRYPT_TAILROOM); if (!frag) goto fail; + /* Make sure that all fragments use the same priority so * that they end up using the same TX queue */ frag->priority = first->priority; + skb_reserve(frag, tx->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); + + /* copy TX information */ + info = IEEE80211_SKB_CB(frag); + memcpy(info, first->cb, sizeof(frag->cb)); + + /* copy/fill in 802.11 header */ fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); memcpy(fhdr, first->data, hdrlen); - if (i == num_fragm - 2) - fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); + + if (i == num_fragm - 2) { + /* clear MOREFRAGS bit for the last fragment */ + fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); + } else { + /* + * No multi-rate retries for fragmented frames, that + * would completely throw off the NAV at other STAs. + */ + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); + info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; + } + + /* copy data */ copylen = left > per_fragm ? per_fragm : left; memcpy(skb_put(frag, copylen), pos, copylen); - memcpy(frag->cb, first->cb, sizeof(frag->cb)); + skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; @@ -765,12 +812,10 @@ ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) tx->extra_frag[0]->len); for (i = 0; i < tx->num_extra_frag; i++) { - if (i + 1 < tx->num_extra_frag) { + if (i + 1 < tx->num_extra_frag) next_len = tx->extra_frag[i + 1]->len; - } else { + else next_len = 0; - tx->rate_idx = tx->last_frag_rate_idx; - } hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data; hdr->duration_id = ieee80211_duration(tx, 0, next_len); @@ -823,7 +868,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, (struct ieee80211_radiotap_header *) skb->data; struct ieee80211_supported_band *sband; int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); sband = tx->local->hw.wiphy->bands[tx->channel->band]; @@ -837,8 +881,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, */ while (!ret) { - int i, target_rate; - ret = ieee80211_radiotap_iterator_next(&iterator); if (ret) @@ -852,38 +894,6 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, * get_unaligned((type *)iterator.this_arg) to dereference * iterator.this_arg for type "type" safely on all arches. */ - case IEEE80211_RADIOTAP_RATE: - /* - * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps - * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps - */ - target_rate = (*iterator.this_arg) * 5; - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *r; - - r = &sband->bitrates[i]; - - if (r->bitrate == target_rate) { - tx->rate_idx = i; - break; - } - } - break; - - case IEEE80211_RADIOTAP_ANTENNA: - /* - * radiotap uses 0 for 1st ant, mac80211 is 1 for - * 1st ant - */ - info->antenna_sel_tx = (*iterator.this_arg) + 1; - break; - -#if 0 - case IEEE80211_RADIOTAP_DBM_TX_POWER: - control->power_level = *iterator.this_arg; - break; -#endif - case IEEE80211_RADIOTAP_FLAGS: if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { /* @@ -949,8 +959,6 @@ __ieee80211_tx_prepare(struct ieee80211_tx_data *tx, tx->local = local; tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); tx->channel = local->hw.conf.channel; - tx->rate_idx = -1; - tx->last_frag_rate_idx = -1; /* * Set this flag (used below to indicate "automatic fragmentation"), * it will be cleared/left by radiotap as desired. @@ -1051,23 +1059,11 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, if (!tx->extra_frag[i]) continue; info = IEEE80211_SKB_CB(tx->extra_frag[i]); - info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT | - IEEE80211_TX_CTL_CLEAR_PS_FILT | + info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT); if (netif_subqueue_stopped(local->mdev, tx->extra_frag[i])) return IEEE80211_TX_FRAG_AGAIN; - if (i == tx->num_extra_frag) { - info->tx_rate_idx = tx->last_frag_rate_idx; - - if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG) - info->flags |= - IEEE80211_TX_CTL_RATE_CTRL_PROBE; - else - info->flags &= - ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } ret = local->ops->tx(local_to_hw(local), tx->extra_frag[i]); @@ -1204,9 +1200,6 @@ retry: store->skb = skb; store->extra_frag = tx.extra_frag; store->num_extra_frag = tx.num_extra_frag; - store->last_frag_rate_idx = tx.last_frag_rate_idx; - store->last_frag_rate_ctrl_probe = - !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG); } out: rcu_read_unlock(); @@ -1763,10 +1756,7 @@ void ieee80211_tx_pending(unsigned long data) store = &local->pending_packet[i]; tx.extra_frag = store->extra_frag; tx.num_extra_frag = store->num_extra_frag; - tx.last_frag_rate_idx = store->last_frag_rate_idx; tx.flags = 0; - if (store->last_frag_rate_ctrl_probe) - tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG; ret = __ieee80211_tx(local, store->skb, &tx); if (ret) { if (ret == IEEE80211_TX_FRAG_AGAIN) @@ -1854,7 +1844,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_if_ap *ap = NULL; struct ieee80211_if_sta *ifsta = NULL; - struct rate_selection rsel; struct beacon_data *beacon; struct ieee80211_supported_band *sband; enum ieee80211_band band = local->hw.conf.channel->band; @@ -1958,32 +1947,23 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, skb->do_not_encrypt = 1; info->band = band; - rate_control_get_rate(sdata, sband, NULL, skb, &rsel); - - if (unlikely(rsel.rate_idx < 0)) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: ieee80211_beacon_get: " - "no rate found\n", - wiphy_name(local->hw.wiphy)); - } - dev_kfree_skb_any(skb); - skb = NULL; - goto out; - } + /* + * XXX: For now, always use the lowest rate + */ + info->control.rates[0].idx = 0; + info->control.rates[0].count = 1; + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); info->control.vif = vif; - info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; - if (sdata->vif.bss_conf.use_short_preamble && - sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; - - info->control.retry_limit = 1; - -out: + out: rcu_read_unlock(); return skb; } diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index f7e442f80a1..31d2e74a1bc 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -636,8 +636,8 @@ static int ieee80211_ioctl_giwrate(struct net_device *dev, sta = sta_info_get(local, sdata->u.sta.bssid); - if (sta && sta->last_txrate_idx < sband->n_bitrates) - rate->value = sband->bitrates[sta->last_txrate_idx].bitrate; + if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) + rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate; else rate->value = 0; |