diff options
Diffstat (limited to 'Documentation/DocBook/dvb/dvbproperty.xml')
| -rw-r--r-- | Documentation/DocBook/dvb/dvbproperty.xml | 375 |
1 files changed, 307 insertions, 68 deletions
diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml index 97f397e2fb3..05ce60362e2 100644 --- a/Documentation/DocBook/dvb/dvbproperty.xml +++ b/Documentation/DocBook/dvb/dvbproperty.xml @@ -1,6 +1,312 @@ -<section id="FE_GET_PROPERTY"> +<section id="FE_GET_SET_PROPERTY"> <title>FE_GET_PROPERTY/FE_SET_PROPERTY</title> +<programlisting> +/* Reserved fields should be set to 0 */ +struct dtv_property { + __u32 cmd; + union { + __u32 data; + struct { + __u8 data[32]; + __u32 len; + __u32 reserved1[3]; + void *reserved2; + } buffer; + } u; + int result; +} __attribute__ ((packed)); + +/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ +#define DTV_IOCTL_MAX_MSGS 64 + +struct dtv_properties { + __u32 num; + struct dtv_property *props; +}; +</programlisting> + +<section id="FE_GET_PROPERTY"> +<title>FE_GET_PROPERTY</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns one or more frontend properties. This call only + requires read-only access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>, + dtv_properties ⋆props);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int num</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct dtv_property *props</para> +</entry><entry + align="char"> +<para>Points to the location where the front-end property commands are stored.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>ERRORS</para> +<informaltable><tgroup cols="2"><tbody><row> + <entry align="char"><para>EINVAL</para></entry> + <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry> + </row><row> + <entry align="char"><para>ENOMEM</para></entry> + <entry align="char"><para>Out of memory.</para></entry> + </row><row> + <entry align="char"><para>EFAULT</para></entry> + <entry align="char"><para>Failure while copying data from/to userspace.</para></entry> + </row><row> + <entry align="char"><para>EOPNOTSUPP</para></entry> + <entry align="char"><para>Property type not supported.</para></entry> + </row></tbody></tgroup></informaltable> +</section> + +<section id="FE_SET_PROPERTY"> +<title>FE_SET_PROPERTY</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call sets one or more frontend properties. This call only + requires read-only access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>, + dtv_properties ⋆props);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int num</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct dtv_property *props</para> +</entry><entry + align="char"> +<para>Points to the location where the front-end property commands are stored.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>ERRORS +</para> +<informaltable><tgroup cols="2"><tbody><row> + <entry align="char"><para>EINVAL</para></entry> + <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry> + </row><row> + <entry align="char"><para>ENOMEM</para></entry> + <entry align="char"><para>Out of memory.</para></entry> + </row><row> + <entry align="char"><para>EFAULT</para></entry> + <entry align="char"><para>Failure while copying data from/to userspace.</para></entry> + </row><row> + <entry align="char"><para>EOPNOTSUPP</para></entry> + <entry align="char"><para>Property type not supported.</para></entry> + </row></tbody></tgroup></informaltable> +</section> + +<para> +On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>, +the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to +get/set up to 64 properties. The actual meaning of each property is described on the next sections. +</para> + +<para>The Available frontend property types are:</para> +<programlisting> +#define DTV_UNDEFINED 0 +#define DTV_TUNE 1 +#define DTV_CLEAR 2 +#define DTV_FREQUENCY 3 +#define DTV_MODULATION 4 +#define DTV_BANDWIDTH_HZ 5 +#define DTV_INVERSION 6 +#define DTV_DISEQC_MASTER 7 +#define DTV_SYMBOL_RATE 8 +#define DTV_INNER_FEC 9 +#define DTV_VOLTAGE 10 +#define DTV_TONE 11 +#define DTV_PILOT 12 +#define DTV_ROLLOFF 13 +#define DTV_DISEQC_SLAVE_REPLY 14 +#define DTV_FE_CAPABILITY_COUNT 15 +#define DTV_FE_CAPABILITY 16 +#define DTV_DELIVERY_SYSTEM 17 +#define DTV_ISDBT_PARTIAL_RECEPTION 18 +#define DTV_ISDBT_SOUND_BROADCASTING 19 +#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 +#define DTV_ISDBT_SB_SEGMENT_IDX 21 +#define DTV_ISDBT_SB_SEGMENT_COUNT 22 +#define DTV_ISDBT_LAYERA_FEC 23 +#define DTV_ISDBT_LAYERA_MODULATION 24 +#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 +#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 +#define DTV_ISDBT_LAYERB_FEC 27 +#define DTV_ISDBT_LAYERB_MODULATION 28 +#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 +#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 +#define DTV_ISDBT_LAYERC_FEC 31 +#define DTV_ISDBT_LAYERC_MODULATION 32 +#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 +#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 +#define DTV_API_VERSION 35 +#define DTV_CODE_RATE_HP 36 +#define DTV_CODE_RATE_LP 37 +#define DTV_GUARD_INTERVAL 38 +#define DTV_TRANSMISSION_MODE 39 +#define DTV_HIERARCHY 40 +#define DTV_ISDBT_LAYER_ENABLED 41 +#define DTV_ISDBS_TS_ID 42 +</programlisting> + +<section id="fe_property_common"> + <title>Parameters that are common to all Digital TV standards</title> + <section id="DTV_FREQUENCY"> + <title><constant>DTV_FREQUENCY</constant></title> + + <para>Central frequency of the channel, in HZ.</para> + + <para>Notes:</para> + <para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. + E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of + the channel which is 6MHz.</para> + + <para>2)As in ISDB-Tsb the channel consists of only one or three segments the + frequency step is 429kHz, 3*429 respectively. As for ISDB-T the + central frequency of the channel is expected.</para> + </section> + + <section id="DTV_BANDWIDTH_HZ"> + <title><constant>DTV_BANDWIDTH_HZ</constant></title> + + <para>Bandwidth for the channel, in HZ.</para> + + <para>Possible values: + <constant>6000000</constant>, + <constant>7000000</constant>, + <constant>8000000</constant>. + </para> + + <para>Notes:</para> + + <para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para> + <para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para> + <para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth + for DVB-C depends on the symbol rate</para> + <para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from + other parameters (DTV_ISDBT_SB_SEGMENT_IDX, + DTV_ISDBT_SB_SEGMENT_COUNT).</para> + </section> + + <section id="DTV_DELIVERY_SYSTEM"> + <title><constant>DTV_DELIVERY_SYSTEM</constant></title> + + <para>Specifies the type of Delivery system</para> + + <para>Possible values: </para> +<programlisting> +typedef enum fe_delivery_system { + SYS_UNDEFINED, + SYS_DVBC_ANNEX_AC, + SYS_DVBC_ANNEX_B, + SYS_DVBT, + SYS_DSS, + SYS_DVBS, + SYS_DVBS2, + SYS_DVBH, + SYS_ISDBT, + SYS_ISDBS, + SYS_ISDBC, + SYS_ATSC, + SYS_ATSCMH, + SYS_DMBTH, + SYS_CMMB, + SYS_DAB, +} fe_delivery_system_t; +</programlisting> + + </section> + + <section id="DTV_TRANSMISSION_MODE"> + <title><constant>DTV_TRANSMISSION_MODE</constant></title> + + <para>Specifies the number of carriers used by the standard</para> + + <para>Possible values are:</para> +<programlisting> +typedef enum fe_transmit_mode { + TRANSMISSION_MODE_2K, + TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_AUTO, + TRANSMISSION_MODE_4K +} fe_transmit_mode_t; +</programlisting> + + <para>Notes:</para> + <para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called + 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para> + + <para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the + hardware will try to find the correct FFT-size (if capable) and will + use TMCC to fill in the missing parameters.</para> + </section> + + <section id="DTV_GUARD_INTERVAL"> + <title><constant>DTV_GUARD_INTERVAL</constant></title> + + <para>Possible values are:</para> +<programlisting> +typedef enum fe_guard_interval { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, + GUARD_INTERVAL_AUTO +} fe_guard_interval_t; +</programlisting> + + <para>Notes:</para> + <para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will + try to find the correct guard interval (if capable) and will use TMCC to fill + in the missing parameters.</para> + </section> +</section> + <section id="isdbt"> <title>ISDB-T frontend</title> <para>This section describes shortly what are the possible parameters in the Linux @@ -32,73 +338,6 @@ <para>Parameters used by ISDB-T and ISDB-Tsb.</para> - <section id="isdbt-parms"> - <title>Parameters that are common with DVB-T and ATSC</title> - - <section id="isdbt-freq"> - <title><constant>DTV_FREQUENCY</constant></title> - - <para>Central frequency of the channel.</para> - - <para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a - valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of - the channel which is 6MHz.</para> - - <para>As in ISDB-Tsb the channel consists of only one or three segments the - frequency step is 429kHz, 3*429 respectively. As for ISDB-T the - central frequency of the channel is expected.</para> - </section> - - <section id="isdbt-bw"> - <title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title> - - <para>Possible values:</para> - - <para>For ISDB-T it should be always 6000000Hz (6MHz)</para> - <para>For ISDB-Tsb it can vary depending on the number of connected segments</para> - - <para>Note: Hardware specific values might be given here, but standard - applications should not bother to set a value to this field as - standard demods are ignoring it anyway.</para> - - <para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from - other parameters (DTV_ISDBT_SB_SEGMENT_IDX, - DTV_ISDBT_SB_SEGMENT_COUNT).</para> - </section> - - <section id="isdbt-delivery-sys"> - <title><constant>DTV_DELIVERY_SYSTEM</constant></title> - - <para>Possible values: <constant>SYS_ISDBT</constant></para> - </section> - - <section id="isdbt-tx-mode"> - <title><constant>DTV_TRANSMISSION_MODE</constant></title> - - <para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called - 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para> - - <para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>, - <constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para> - - <para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the - hardware will try to find the correct FFT-size (if capable) and will - use TMCC to fill in the missing parameters.</para> - - <para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para> - </section> - - <section id="isdbt-guard-interval"> - <title><constant>DTV_GUARD_INTERVAL</constant></title> - - <para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>, - <constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para> - - <para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will - try to find the correct guard interval (if capable) and will use TMCC to fill - in the missing parameters.</para> - </section> - </section> <section id="isdbt-new-parms"> <title>ISDB-T only parameters</title> |