diff options
Diffstat (limited to 'Documentation/Intel-IOMMU.txt')
| -rw-r--r-- | Documentation/Intel-IOMMU.txt | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt new file mode 100644 index 00000000000..cbb4dbaef76 --- /dev/null +++ b/Documentation/Intel-IOMMU.txt @@ -0,0 +1,93 @@ +Linux IOMMU Support +=================== + +The architecture spec can be obtained from the below location. + +http://www.intel.com/technology/virtualization/ + +This guide gives a quick cheat sheet for some basic understanding. + +Some Keywords + +DMAR - DMA remapping +DRHD - DMA Engine Reporting Structure +RMRR - Reserved memory Region Reporting Structure +ZLR - Zero length reads from PCI devices +IOVA - IO Virtual address. + +Basic stuff +----------- + +ACPI enumerates and lists the different DMA engines in the platform, and +device scope relationships between PCI devices and which DMA engine controls +them. + +What is RMRR? +------------- + +There are some devices the BIOS controls, for e.g USB devices to perform +PS2 emulation. The regions of memory used for these devices are marked +reserved in the e820 map. When we turn on DMA translation, DMA to those +regions will fail. Hence BIOS uses RMRR to specify these regions along with +devices that need to access these regions. OS is expected to setup +unity mappings for these regions for these devices to access these regions. + +How is IOVA generated? +--------------------- + +Well behaved drivers call pci_map_*() calls before sending command to device +that needs to perform DMA. Once DMA is completed and mapping is no longer +required, device performs a pci_unmap_*() calls to unmap the region. + +The Intel IOMMU driver allocates a virtual address per domain. Each PCIE +device has its own domain (hence protection). Devices under p2p bridges +share the virtual address with all devices under the p2p bridge due to +transaction id aliasing for p2p bridges. + +IOVA generation is pretty generic. We used the same technique as vmalloc() +but these are not global address spaces, but separate for each domain. +Different DMA engines may support different number of domains. + +We also allocate gaurd pages with each mapping, so we can attempt to catch +any overflow that might happen. + + +Graphics Problems? +------------------ +If you encounter issues with graphics devices, you can try adding +option intel_iommu=igfx_off to turn off the integrated graphics engine. + +Some exceptions to IOVA +----------------------- +Interrupt ranges are not address translated, (0xfee00000 - 0xfeefffff). +The same is true for peer to peer transactions. Hence we reserve the +address from PCI MMIO ranges so they are not allocated for IOVA addresses. + +Boot Message Sample +------------------- + +Something like this gets printed indicating presence of DMAR tables +in ACPI. + +ACPI: DMAR (v001 A M I OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0 + +When DMAR is being processed and initialized by ACPI, prints DMAR locations +and any RMRR's processed. + +ACPI DMAR:Host address width 36 +ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000 +ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000 +ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000 +ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff +ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff + +When DMAR is enabled for use, you will notice.. + +PCI-DMA: Using DMAR IOMMU + +TBD +---- + +- For compatibility testing, could use unity map domain for all devices, just + provide a 1-1 for all useful memory under a single domain for all devices. +- API for paravirt ops for abstracting functionlity for VMM folks. |