diff options
Diffstat (limited to 'Documentation/aoe/aoe.txt')
| -rw-r--r-- | Documentation/aoe/aoe.txt | 60 |
1 files changed, 40 insertions, 20 deletions
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index 5f5aa16047f..c71487d399d 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -1,8 +1,16 @@ -The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ... +ATA over Ethernet is a network protocol that provides simple access to +block storage on the LAN. - http://www.coraid.com/SUPPORT/EtherDrive-HBA + http://support.coraid.com/documents/AoEr11.txt - It has many tips and hints! +The EtherDrive (R) HOWTO for 2.6 and 3.x kernels is found at ... + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html + +It has many tips and hints! Please see, especially, recommended +tunings for virtual memory: + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO-5.html#ss5.19 The aoetools are userland programs that are designed to work with this driver. The aoetools are on sourceforge. @@ -23,20 +31,12 @@ CREATING DEVICE NODES There is a udev-install.sh script that shows how to install these rules on your system. - If you are not using udev, two scripts are provided in - Documentation/aoe as examples of static device node creation for - using the aoe driver. - - rm -rf /dev/etherd - sh Documentation/aoe/mkdevs.sh /dev/etherd - - ... or to make just one shelf's worth of block device nodes ... - - sh Documentation/aoe/mkshelf.sh /dev/etherd 0 - There is also an autoload script that shows how to edit /etc/modprobe.d/aoe.conf to ensure that the aoe module is loaded when - necessary. + necessary. Preloading the aoe module is preferable to autoloading, + however, because AoE discovery takes a few seconds. It can be + confusing when an AoE device is not present the first time the a + command is run but appears a second later. USING DEVICE NODES @@ -51,9 +51,9 @@ USING DEVICE NODES "echo > /dev/etherd/discover" tells the driver to find out what AoE devices are available. - These character devices may disappear and be replaced by sysfs - counterparts. Using the commands in aoetools insulates users from - these implementation details. + In the future these character devices may disappear and be replaced + by sysfs counterparts. Using the commands in aoetools insulates + users from these implementation details. The block devices are named like this: @@ -76,8 +76,8 @@ USING SYSFS The netif attribute is the network interface on the localhost through which we are communicating with the remote AoE device. - There is a script in this directory that formats this information - in a convenient way. Users with aoetools can use the aoe-stat + There is a script in this directory that formats this information in + a convenient way. Users with aoetools should use the aoe-stat command. root@makki root# sh Documentation/aoe/status.sh @@ -121,3 +121,23 @@ DRIVER OPTIONS usage example for the module parameter. modprobe aoe_iflist="eth1 eth3" + + The aoe_deadsecs module parameter determines the maximum number of + seconds that the driver will wait for an AoE device to provide a + response to an AoE command. After aoe_deadsecs seconds have + elapsed, the AoE device will be marked as "down". A value of zero + is supported for testing purposes and makes the aoe driver keep + trying AoE commands forever. + + The aoe_maxout module parameter has a default of 128. This is the + maximum number of unresponded packets that will be sent to an AoE + target at one time. + + The aoe_dyndevs module parameter defaults to 1, meaning that the + driver will assign a block device minor number to a discovered AoE + target based on the order of its discovery. With dynamic minor + device numbers in use, a greater range of AoE shelf and slot + addresses can be supported. Users with udev will never have to + think about minor numbers. Using aoe_dyndevs=0 allows device nodes + to be pre-created using a static minor-number scheme with the + aoe-mkshelf script in the aoetools. |