4 files changed, 64 insertions, 2 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 82e418d648d..7f5fc3ba9c9 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -20,6 +20,8 @@ Samsung-S3C24XX
 	- S3C24XX ARM Linux Overview
 Sharp-LH
 	- Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
+SPEAr
+	- ST SPEAr platform Linux Overview
 VFP/
 	- Release notes for Linux Kernel Vector Floating Point support code
 empeg/
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy
index 7197a9e958e..f9f62e8c071 100644
--- a/Documentation/arm/SA1100/ADSBitsy
+++ b/Documentation/arm/SA1100/ADSBitsy
@@ -32,7 +32,7 @@ Notes:
 
 - The flash on board is divided into 3 partitions.
   You should be careful to use flash on board.
-  It's partition is different from GraphicsClient Plus and GraphicsMaster
+  Its partition is different from GraphicsClient Plus and GraphicsMaster
 
 - 16bpp mode requires a different cable than what ships with the board.
   Contact ADS or look through the manual to wire your own. Currently,
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
new file mode 100644
index 00000000000..253a35c6f78
--- /dev/null
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -0,0 +1,60 @@
+			SPEAr ARM Linux Overview
+			==========================
+
+Introduction
+------------
+
+  SPEAr (Structured Processor Enhanced Architecture).
+  weblink : http://www.st.com/spear
+
+  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
+  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
+  series is in progress.
+
+  Hierarchy in SPEAr is as follows:
+
+  SPEAr (Platform)
+	- SPEAr3XX (3XX SOC series, based on ARM9)
+		- SPEAr300 (SOC)
+			- SPEAr300_EVB (Evaluation Board)
+		- SPEAr310 (SOC)
+			- SPEAr310_EVB (Evaluation Board)
+		- SPEAr320 (SOC)
+			- SPEAr320_EVB (Evaluation Board)
+	- SPEAr6XX (6XX SOC series, based on ARM9)
+		- SPEAr600 (SOC)
+			- SPEAr600_EVB (Evaluation Board)
+	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+		- SPEAr1300 (SOC)
+
+  Configuration
+  -------------
+
+  A generic configuration is provided for each machine, and can be used as the
+  default by
+	make spear600_defconfig
+	make spear300_defconfig
+	make spear310_defconfig
+	make spear320_defconfig
+
+  Layout
+  ------
+
+  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
+  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  with headers in plat/.
+
+  Each machine series have a directory with name arch/arm/mach-spear followed by
+  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
+  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
+  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
+  mach-spear* also contains board specific files for each machine type.
+
+
+  Document Author
+  ---------------
+
+  Viresh Kumar, (c) 2010 ST Microelectronics
diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
index 1e6a23fdf2f..dc460f05564 100644
--- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
+++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
@@ -7,7 +7,7 @@ The driver only implements a four-wire touch panel protocol.
 
 The touchscreen driver is maintenance free except for the pen-down or
 touch threshold.  Some resistive displays and board combinations may
-require tuning of this threshold.  The driver exposes some of it's
+require tuning of this threshold.  The driver exposes some of its
 internal state in the sys filesystem.  If the kernel is configured
 with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
 directory