diff options
Diffstat (limited to 'Documentation/devices.txt')
| -rw-r--r-- | Documentation/devices.txt | 127 |
1 files changed, 64 insertions, 63 deletions
diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 2be08240ee8..327de162475 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -1,7 +1,7 @@ LINUX ALLOCATED DEVICES (2.6+ version) - Maintained by Torben Mathiasen <device@lanana.org> + Maintained by Alan Cox <device@lanana.org> Last revised: 29 November 2006 @@ -67,6 +67,11 @@ up to date. Due to the number of registrations I have to maintain it in "batch mode", so there is likely additional registrations that haven't been listed yet. +Fourth, remember that Linux now has extensive support for dynamic allocation +of device numbering and can use sysfs and udev to handle the naming needs. +There are still some exceptions in the serial and boot device area. Before +asking for a device number make sure you actually need one. + Finally, sometimes I have to play "namespace police." Please don't be offended. I often get submissions for /dev names that would be bound to cause conflicts down the road. I am trying to avoid getting in a @@ -101,7 +106,7 @@ Your cooperation is appreciated. 0 = /dev/ram0 First RAM disk 1 = /dev/ram1 Second RAM disk ... - 250 = /dev/initrd Initial RAM disk {2.6} + 250 = /dev/initrd Initial RAM disk Older kernels had /dev/ramdisk (1, 1) here. /dev/initrd refers to a RAM disk which was preloaded @@ -340,7 +345,7 @@ Your cooperation is appreciated. 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen 15 = /dev/touchscreen/mk712 MK712 touchscreen 128 = /dev/beep Fancy beep device - 129 = /dev/modreq Kernel module load request {2.6} + 129 = 130 = /dev/watchdog Watchdog timer port 131 = /dev/temperature Machine internal temperature 132 = /dev/hwtrap Hardware fault trap @@ -350,10 +355,10 @@ Your cooperation is appreciated. 139 = /dev/openprom SPARC OpenBoot PROM 140 = /dev/relay8 Berkshire Products Octal relay card 141 = /dev/relay16 Berkshire Products ISO-16 relay card - 142 = /dev/msr x86 model-specific registers {2.6} + 142 = 143 = /dev/pciconf PCI configuration space 144 = /dev/nvram Non-volatile configuration RAM - 145 = /dev/hfmodem Soundcard shortwave modem control {2.6} + 145 = /dev/hfmodem Soundcard shortwave modem control 146 = /dev/graphics Linux/SGI graphics device 147 = /dev/opengl Linux/SGI OpenGL pipe 148 = /dev/gfx Linux/SGI graphics effects device @@ -435,6 +440,9 @@ Your cooperation is appreciated. 228 = /dev/hpet HPET driver 229 = /dev/fuse Fuse (virtual filesystem in user-space) 230 = /dev/midishare MidiShare driver + 231 = /dev/snapshot System memory snapshot device + 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions) + 233 = /dev/kmview View-OS A process with a view 240-254 Reserved for local use 255 Reserved for MISC_DYNAMIC_MINOR @@ -466,10 +474,7 @@ Your cooperation is appreciated. The device names specified are proposed -- if there are "standard" names for these devices, please let me know. - 12 block MSCDEX CD-ROM callback support {2.6} - 0 = /dev/dos_cd0 First MSCDEX CD-ROM - 1 = /dev/dos_cd1 Second MSCDEX CD-ROM - ... + 12 block 13 char Input core 0 = /dev/input/js0 First joystick @@ -498,7 +503,7 @@ Your cooperation is appreciated. 2 = /dev/midi00 First MIDI port 3 = /dev/dsp Digital audio 4 = /dev/audio Sun-compatible digital audio - 6 = /dev/sndstat Sound card status information {2.6} + 6 = 7 = /dev/audioctl SPARC audio control device 8 = /dev/sequencer2 Sequencer -- alternate device 16 = /dev/mixer1 Second soundcard mixer control @@ -510,14 +515,7 @@ Your cooperation is appreciated. 34 = /dev/midi02 Third MIDI port 50 = /dev/midi03 Fourth MIDI port - 14 block BIOS harddrive callback support {2.6} - 0 = /dev/dos_hda First BIOS harddrive whole disk - 64 = /dev/dos_hdb Second BIOS harddrive whole disk - 128 = /dev/dos_hdc Third BIOS harddrive whole disk - 192 = /dev/dos_hdd Fourth BIOS harddrive whole disk - - Partitions are handled in the same way as IDE disks - (see major number 3). + 14 block 15 char Joystick 0 = /dev/js0 First analog joystick @@ -535,14 +533,14 @@ Your cooperation is appreciated. 16 block GoldStar CD-ROM 0 = /dev/gscd GoldStar CD-ROM - 17 char Chase serial card + 17 char OBSOLETE (was Chase serial card) 0 = /dev/ttyH0 First Chase port 1 = /dev/ttyH1 Second Chase port ... 17 block Optics Storage CD-ROM 0 = /dev/optcd Optics Storage CD-ROM - 18 char Chase serial card - alternate devices + 18 char OBSOLETE (was Chase serial card - alternate devices) 0 = /dev/cuh0 Callout device for ttyH0 1 = /dev/cuh1 Callout device for ttyH1 ... @@ -644,8 +642,7 @@ Your cooperation is appreciated. 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3 - 26 char Quanta WinVision frame grabber {2.6} - 0 = /dev/wvisfgrab Quanta WinVision frame grabber + 26 char 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0 @@ -872,7 +869,7 @@ Your cooperation is appreciated. and "user level packet I/O." This board is also accessible as a standard networking "eth" device. - 38 block Reserved for Linux/AP+ + 38 block OBSOLETE (was Linux/AP+) 39 char ML-16P experimental I/O board 0 = /dev/ml16pa-a0 First card, first analog channel @@ -892,29 +889,16 @@ Your cooperation is appreciated. 50 = /dev/ml16pb-c1 Second card, second counter/timer 51 = /dev/ml16pb-c2 Second card, third counter/timer ... - 39 block Reserved for Linux/AP+ + 39 block - 40 char Matrox Meteor frame grabber {2.6} - 0 = /dev/mmetfgrab Matrox Meteor frame grabber + 40 char - 40 block Syquest EZ135 parallel port removable drive - 0 = /dev/eza Parallel EZ135 drive, whole disk - - This device is obsolete and will be removed in a - future version of Linux. It has been replaced with - the parallel port IDE disk driver at major number 45. - Partitions are handled in the same way as IDE disks - (see major number 3). + 40 block 41 char Yet Another Micro Monitor 0 = /dev/yamm Yet Another Micro Monitor - 41 block MicroSolutions BackPack parallel port CD-ROM - 0 = /dev/bpcd BackPack CD-ROM - - This device is obsolete and will be removed in a - future version of Linux. It has been replaced with - the parallel port ATAPI CD-ROM driver at major number 46. + 41 block 42 char Demo/sample use @@ -1681,13 +1665,7 @@ Your cooperation is appreciated. disks (see major number 3) except that the limit on partitions is 15. - 93 char IBM Smart Capture Card frame grabber {2.6} - 0 = /dev/iscc0 First Smart Capture Card - 1 = /dev/iscc1 Second Smart Capture Card - ... - 128 = /dev/isccctl0 First Smart Capture Card control - 129 = /dev/isccctl1 Second Smart Capture Card control - ... + 93 char 93 block NAND Flash Translation Layer filesystem 0 = /dev/nftla First NFTL layer @@ -1695,10 +1673,7 @@ Your cooperation is appreciated. ... 240 = /dev/nftlp 16th NTFL layer - 94 char miroVIDEO DC10/30 capture/playback device {2.6} - 0 = /dev/dcxx0 First capture card - 1 = /dev/dcxx1 Second capture card - ... + 94 char 94 block IBM S/390 DASD block storage 0 = /dev/dasda First DASD device, major @@ -1791,11 +1766,7 @@ Your cooperation is appreciated. ... 15 = /dev/amiraid/ar?p15 15th partition -102 char Philips SAA5249 Teletext signal decoder {2.6} - 0 = /dev/tlk0 First Teletext decoder - 1 = /dev/tlk1 Second Teletext decoder - 2 = /dev/tlk2 Third Teletext decoder - 3 = /dev/tlk3 Fourth Teletext decoder +102 char 102 block Compressed block device 0 = /dev/cbd/a First compressed block device, whole device @@ -1916,10 +1887,7 @@ Your cooperation is appreciated. DAC960 (see major number 48) except that the limit on partitions is 15. -111 char Philips SAA7146-based audio/video card {2.6} - 0 = /dev/av0 First A/V card - 1 = /dev/av1 Second A/V card - ... +111 char 111 block Compaq Next Generation Drive Array, eighth controller 0 = /dev/cciss/c7d0 First logical drive, whole disk @@ -2079,8 +2047,8 @@ Your cooperation is appreciated. ... 119 char VMware virtual network control - 0 = /dev/vmnet0 1st virtual network - 1 = /dev/vmnet1 2nd virtual network + 0 = /dev/vnet0 1st virtual network + 1 = /dev/vnet1 2nd virtual network ... 120-127 char LOCAL/EXPERIMENTAL USE @@ -2450,7 +2418,7 @@ Your cooperation is appreciated. 2 = /dev/raw/raw2 Second raw I/O device ... -163 char UNASSIGNED (was Radio Tech BIM-XXX-RS232 radio modem - see 51) +163 char 164 char Chase Research AT/PCI-Fast serial card 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0 @@ -2542,6 +2510,12 @@ Your cooperation is appreciated. 1 = /dev/clanvi1 Second cLAN adapter ... +179 block MMC block devices + 0 = /dev/mmcblk0 First SD/MMC card + 1 = /dev/mmcblk0p1 First partition on first MMC card + 8 = /dev/mmcblk1 Second SD/MMC card + ... + 179 char CCube DVXChip-based PCI products 0 = /dev/dvxirq0 First DVX device 1 = /dev/dvxirq1 Second DVX device @@ -2560,6 +2534,9 @@ Your cooperation is appreciated. 96 = /dev/usb/hiddev0 1st USB HID device ... 111 = /dev/usb/hiddev15 16th USB HID device + 112 = /dev/usb/auer0 1st auerswald ISDN device + ... + 127 = /dev/usb/auer15 16th auerswald ISDN device 128 = /dev/usb/brlvgr0 First Braille Voyager device ... 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device @@ -2810,6 +2787,16 @@ Your cooperation is appreciated. ... 190 = /dev/ttyUL3 Xilinx uartlite - port 3 191 = /dev/xvc0 Xen virtual console - port 0 + 192 = /dev/ttyPZ0 pmac_zilog - port 0 + ... + 195 = /dev/ttyPZ3 pmac_zilog - port 3 + 196 = /dev/ttyTX0 TX39/49 serial port 0 + ... + 204 = /dev/ttyTX7 TX39/49 serial port 7 + 205 = /dev/ttySC0 SC26xx serial port 0 + 206 = /dev/ttySC1 SC26xx serial port 1 + 207 = /dev/ttySC2 SC26xx serial port 2 + 208 = /dev/ttySC3 SC26xx serial port 3 205 char Low-density serial ports (alternate device) 0 = /dev/culu0 Callout device for ttyLU0 @@ -3145,6 +3132,20 @@ Your cooperation is appreciated. 1 = /dev/blockrom1 Second ROM card's translation layer interface ... +259 block Block Extended Major + Used dynamically to hold additional partition minor + numbers and allow large numbers of partitions per device + +259 char FPGA configuration interfaces + 0 = /dev/icap0 First Xilinx internal configuration + 1 = /dev/icap1 Second Xilinx internal configuration + +260 char OSD (Object-based-device) SCSI Device + 0 = /dev/osd0 First OSD Device + 1 = /dev/osd1 Second OSD Device + ... + 255 = /dev/osd255 256th OSD Device + **** ADDITIONAL /dev DIRECTORY ENTRIES This section details additional entries that should or may exist in |