diff options
Diffstat (limited to 'Documentation/devicetree/bindings/crypto/fsl-sec4.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/crypto/fsl-sec4.txt | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt new file mode 100644 index 00000000000..fce16a85e2c --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -0,0 +1,409 @@ +===================================================================== +SEC 4 Device Tree Binding +Copyright (C) 2008-2011 Freescale Semiconductor Inc. + + CONTENTS + -Overview + -SEC 4 Node + -Job Ring Node + -Run Time Integrity Check (RTIC) Node + -Run Time Integrity Check (RTIC) Memory Node + -Secure Non-Volatile Storage (SNVS) Node + -Full Example + +NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator +Accelerator and Assurance Module (CAAM). + +===================================================================== +Overview + +DESCRIPTION + +SEC 4 h/w can process requests from 2 types of sources. +1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). +2. Job Rings (HW interface between cores & SEC 4 registers). + +High Speed Data Path Configuration: + +HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts +such as the P4080. The number of simultaneous dequeues the QI can make is +equal to the number of Descriptor Controller (DECO) engines in a particular +SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus +dequeue from 5 subportals simultaneously. + +Job Ring Data Path Configuration: + +Each JR is located on a separate 4k page, they may (or may not) be made visible +in the memory partition devoted to a particular core. The P4080 has 4 JRs, so +up to 4 JRs can be configured; and all 4 JRs process requests in parallel. + +===================================================================== +P4080 SEC 4 Node + +Description + + Node defines the base address of the SEC 4 block. + This block specifies the address range of all global + configuration registers for the SEC 4 block. It + also receives interrupts from the Run Time Integrity Check + (RTIC) function within the SEC 4 block. + +PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,p4080-sec4.0","fsl,sec-4.0" + + - #address-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. + + - #size-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical + address and length of the SEC4.0 configuration registers. + registers + + - ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical address + range of the SEC 4.0 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + + - interrupts + Usage: required + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + + - interrupt-parent + Usage: (required if interrupt property is defined) + Value type: <phandle> + Definition: A single <phandle> value that points + to the interrupt parent to which the child domain + is being mapped. + + Note: All other standard properties (see the ePAPR) are allowed + but are optional. + + +EXAMPLE + crypto@300000 { + compatible = "fsl,p4080-sec4.0", "fsl,sec4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupt-parent = <&mpic>; + interrupts = <92 2>; + }; + +===================================================================== +P4080 Job Ring (JR) Node + + Child of the crypto node defines data processing interface to SEC 4 + across the peripheral bus for purposes of processing + cryptographic descriptors. The specified address + range can be made visible to one (or more) cores. + The interrupt defined for this node is controlled within + the address range of this node. + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,p4080-sec4.0-job-ring","fsl,sec4.0-job-ring" + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies a two JR parameters: an offset from + the parent physical address and the length the JR registers. + + - fsl,liodn + Usage: optional-but-recommended + Value type: <prop-encoded-array> + Definition: + Specifies the LIODN to be used in conjunction with + the ppid-to-liodn table that specifies the PPID to LIODN mapping. + Needed if the PAMU is used. Value is a 12 bit value + where value is a LIODN ID for this JR. This property is + normally set by boot firmware. + + - interrupts + Usage: required + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + + - interrupt-parent + Usage: (required if interrupt property is defined) + Value type: <phandle> + Definition: A single <phandle> value that points + to the interrupt parent to which the child domain + is being mapped. + +EXAMPLE + jr@1000 { + compatible = "fsl,p4080-sec4.0-job-ring", + "fsl,sec4.0-job-ring"; + reg = <0x1000 0x1000>; + fsl,liodn = <0x081>; + interrupt-parent = <&mpic>; + interrupts = <88 2>; + }; + + +===================================================================== +P4080 Run Time Integrity Check (RTIC) Node + + Child node of the crypto node. Defines a register space that + contains up to 5 sets of addresses and their lengths (sizes) that + will be checked at run time. After an initial hash result is + calculated, these addresses are checked by HW to monitor any + change. If any memory is modified, a Security Violation is + triggered (see SNVS definition). + + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,p4080-sec4.0-rtic","fsl,sec4.0-rtic". + + - #address-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. Must + have a value of 1. + + - #size-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. Must have a value of 1. + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies a two parameters: + an offset from the parent physical address and the length + the SEC4 registers. + + - ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical address + range of the SEC 4 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + +EXAMPLE + rtic@6000 { + compatible = "fsl,p4080-sec4.0-rtic", + "fsl,sec4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + }; + +===================================================================== +P4080 Run Time Integrity Check (RTIC) Memory Node + A child node that defines individual RTIC memory regions that are used to + perform run-time integrity check of memory areas that should not modified. + The node defines a register that contains the memory address & + length (combined) and a second register that contains the hash result + in big endian format. + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,p4080-sec4.0-rtic-memory","fsl,sec4.0-rtic-memory". + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies two parameters: + an offset from the parent physical address and the length: + + 1. The location of the RTIC memory address & length registers. + 2. The location RTIC hash result. + + - fsl,rtic-region + Usage: optional-but-recommended + Value type: <prop-encoded-array> + Definition: + Specifies the HW address (36 bit address) for this region + followed by the length of the HW partition to be checked; + the address is represented as a 64 bit quantity followed + by a 32 bit length. + + - fsl,liodn + Usage: optional-but-recommended + Value type: <prop-encoded-array> + Definition: + Specifies the LIODN to be used in conjunction with + the ppid-to-liodn table that specifies the PPID to LIODN + mapping. Needed if the PAMU is used. Value is a 12 bit value + where value is a LIODN ID for this RTIC memory region. This + property is normally set by boot firmware. + +EXAMPLE + rtic-a@0 { + compatible = "fsl,p4080-sec4.0-rtic-memory", + "fsl,sec4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + fsl,liodn = <0x03c>; + fsl,rtic-region = <0x12345678 0x12345678 0x12345678>; + }; + +===================================================================== +P4080 Secure Non-Volatile Storage (SNVS) Node + + Node defines address range and the associated + interrupt for the SNVS function. This function + monitors security state information & reports + security violations. + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon". + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical + address and length of the SEC4 configuration + registers. + + - interrupts + Usage: required + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + + - interrupt-parent + Usage: (required if interrupt property is defined) + Value type: <phandle> + Definition: A single <phandle> value that points + to the interrupt parent to which the child domain + is being mapped. + +EXAMPLE + sec_mon@314000 { + compatible = "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon"; + reg = <0x314000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <93 2>; + }; + +===================================================================== +FULL EXAMPLE + + crypto: crypto@300000 { + compatible = "fsl,p4080-sec4.0", "fsl,sec4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupt-parent = <&mpic>; + interrupts = <92 2>; + + sec_jr0: jr@1000 { + compatible = "fsl,p4080-sec4.0-job-ring", + "fsl,sec4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <88 2>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,p4080-sec4.0-job-ring", + "fsl,sec4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <89 2>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,p4080-sec4.0-job-ring", + "fsl,sec4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <90 2>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,p4080-sec4.0-job-ring", + "fsl,sec4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <91 2>; + }; + + rtic@6000 { + compatible = "fsl,p4080-sec4.0-rtic", + "fsl,sec4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,p4080-sec4.0-rtic-memory", + "fsl,sec4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,p4080-sec4.0-rtic-memory", + "fsl,sec4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,p4080-sec4.0-rtic-memory", + "fsl,sec4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,p4080-sec4.0-rtic-memory", + "fsl,sec4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + + sec_mon: sec_mon@314000 { + compatible = "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon"; + reg = <0x314000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <93 2>; + }; + +===================================================================== |