diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt new file mode 100644 index 00000000000..492911744ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt @@ -0,0 +1,32 @@ +Synopsys DesignWare APB interrupt controller (dw_apb_ictl) + +Synopsys DesignWare provides interrupt controller IP for APB known as +dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with +APB bus, e.g. Marvell Armada 1500. + +Required properties: +- compatible: shall be "snps,dw-apb-ictl" +- reg: physical base address of the controller and length of memory mapped + region starting with ENABLE_LOW register +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 +- interrupts: interrupt reference to primary interrupt controller +- interrupt-parent: (optional) reference specific primary interrupt controller + +The interrupt sources map to the corresponding bits in the interrupt +registers, i.e. +- 0 maps to bit 0 of low interrupts, +- 1 maps to bit 1 of low interrupts, +- 32 maps to bit 0 of high interrupts, +- 33 maps to bit 1 of high interrupts, +- (optional) fast interrupts start at 64. + +Example: + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; |