diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/partition.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/partition.txt | 36 |
1 files changed, 34 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 6e1f61f1e78..9315ac96b49 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -5,8 +5,12 @@ on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -#address-cells & #size-cells must both be present in the mtd device and be -equal to 1. +#address-cells & #size-cells must both be present in the mtd device. There are +two valid values for both: +<1>: for partitions that require a single 32-bit cell to represent their + size/address (aka the value is below 4 GiB) +<2>: for partitions that require two 32-bit cells to represent their + size/address (aka the value is 4 GiB or greater). Required properties: - reg : The partition's offset and size within the mtd bank. @@ -36,3 +40,31 @@ flash@0 { reg = <0x0100000 0x200000>; }; }; + +flash@1 { + #address-cells = <1>; + #size-cells = <2>; + + /* a 4 GiB partition */ + partition@0 { + label = "filesystem"; + reg = <0x00000000 0x1 0x00000000>; + }; +}; + +flash@2 { + #address-cells = <2>; + #size-cells = <2>; + + /* an 8 GiB partition */ + partition@0 { + label = "filesystem #1"; + reg = <0x0 0x00000000 0x2 0x00000000>; + }; + + /* a 4 GiB partition */ + partition@200000000 { + label = "filesystem #2"; + reg = <0x2 0x00000000 0x1 0x00000000>; + }; +}; |