summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt60
1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
new file mode 100644
index 00000000000..dff0e5f995e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -0,0 +1,60 @@
+* Allwinner A1X Pin Controller
+
+The pins controlled by sunXi pin controller are organized in banks,
+each bank has 32 pins. Each pin has 7 multiplexing functions, with
+the first two functions being GPIO in and out. The configuration on
+the pins includes drive strength and pull-up.
+
+Required properties:
+- compatible: "allwinner,<soc>-pinctrl". Supported SoCs for now are:
+ sun5i-a13.
+- reg: Should contain the register physical address and length for the
+ pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+A pinctrl node should contain at least one subnodes representing the
+pinctrl groups available on the machine. Each subnode will list the
+pins it needs, and how they should be configured, with regard to muxer
+configuration, drive strength and pullups. If one of these options is
+not set, its actual value will be unspecified.
+
+Required subnode-properties:
+
+- allwinner,pins: List of strings containing the pin name.
+- allwinner,function: Function to mux the pins listed above to.
+
+Optional subnode-properties:
+- allwinner,drive: Integer. Represents the current sent to the pin
+ 0: 10 mA
+ 1: 20 mA
+ 2: 30 mA
+ 3: 40 mA
+- allwinner,pull: Integer.
+ 0: No resistor
+ 1: Pull-up resistor
+ 2: Pull-down resistor
+
+Examples:
+
+pinctrl@01c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+};