summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt')
-rw-r--r--Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt36
1 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
new file mode 100644
index 00000000000..3ad115efed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+
+Optional ST33ZP24 Properties:
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
+
+&i2c2 {
+
+ status = "okay";
+
+ st33zp24: st33zp24@13 {
+
+ compatible = "st,st33zp24-i2c";
+
+ reg = <0x13>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+ lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+};