diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt | 41 |
1 files changed, 27 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index 374e145c2ef..ed785b3f67b 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -4,17 +4,25 @@ Required properties: - compatible : "ti,dm646x-mcasp-audio" : for DM646x platforms "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,omap2-mcasp-audio" : for OMAP2 platforms (TI81xx, AM33xx) - -- reg : Should contain McASP registers offset and length -- interrupts : Interrupt number for McASP -- op-mode : I2S/DIT ops mode. -- tdm-slots : Slots for TDM operation. -- num-serializer : Serializers used by McASP. -- serial-dir : A list of serializer pin mode. The list number should be equal - to "num-serializer" parameter. Each entry is a number indication - serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX) + "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, TI81xx) +- reg : Should contain reg specifiers for the entries in the reg-names property. +- reg-names : Should contain: + * "mpu" for the main registers (required). For compatibility with + existing software, it is recommended this is the first entry. + * "dat" for separate data port register access (optional). +- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF, + IEC60958-1, and AES-3 formats. +- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted + or received over one serializer. +- serial-dir : A list of serializer configuration. Each entry is a number + indication for serializer pin direction. + (0 - INACTIVE, 1 - TX, 2 - RX) +- dmas: two element list of DMA controller phandles and DMA request line + ordered pairs. +- dma-names: identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. The dma + identifiers must be "rx" and "tx". Optional properties: @@ -23,18 +31,23 @@ Optional properties: - rx-num-evt : FIFO levels. - sram-size-playback : size of sram to be allocated during playback - sram-size-capture : size of sram to be allocated during capture +- interrupts : Interrupt numbers for McASP, currently not used by the driver +- interrupt-names : Known interrupt names are "tx" and "rx" +- pinctrl-0: Should specify pin control group used for this controller. +- pinctrl-names: Should contain only one value - "default", for more details + please refer to pinctrl-bindings.txt + Example: mcasp0: mcasp0@1d00000 { compatible = "ti,da830-mcasp-audio"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x100000 0x3000>; - interrupts = <82 83>; + reg-names "mpu"; + interrupts = <82>, <83>; + interrupts-names = "tx", "rx"; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; - num-serializer = <16>; serial-dir = < 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 0 0 |