3 files changed, 8 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
deleted file mode 100644
index 6b9e5189669..00000000000
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 800dafe5b01..e5a4d1b4acf 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -67,7 +67,7 @@ only 1(SINGLE), 2(DUAL) and 4(QUAD).
 Dual/Quad mode is not allowed when 3-wire mode is used.
 
 If a gpio chipselect is used for the SPI slave the gpio number will be passed
-via the cs_gpio
+via the SPI master node cs-gpios property.
 
 SPI example for an MPC5200 SPI bus:
 	spi@f00 {
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 1f9641ade0b..601a360531a 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -3,6 +3,11 @@ TI QSPI controller.
 Required properties:
 - compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
 - reg: Should contain QSPI registers location and length.
+- reg-names: Should contain the resource reg names.
+	- qspi_base: Qspi configuration register Address space
+	- qspi_mmap: Memory mapped Address space
+	- (optional) qspi_ctrlmod: Control module Address space
+- interrupts: should contain the qspi interrupt number.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ti,hwmods: Name of the hwmod associated to the QSPI
 
@@ -14,7 +19,8 @@ Example:
 
 qspi: qspi@4b300000 {
 	compatible = "ti,dra7xxx-qspi";
-	reg = <0x4b300000 0x100>;
+	reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+	reg-names = "qspi_base", "qspi_mmap";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	spi-max-frequency = <25000000>;