summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/video/via,vt8500-fb.txt')
-rw-r--r--Documentation/devicetree/bindings/video/via,vt8500-fb.txt48
1 files changed, 11 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
index c870b6478ec..2871e218a0f 100644
--- a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -5,58 +5,32 @@ Required properties:
- compatible : "via,vt8500-fb"
- reg : Should contain 1 register ranges(address and length)
- interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
-Required nodes:
-- display: a display node is required to initialize the lcd panel
- This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
- as specified below.
+Required subnodes:
+- display-timings: see display-timing.txt for information
Example:
- fb@d800e400 {
+ fb@d8050800 {
compatible = "via,vt8500-fb";
reg = <0xd800e400 0x400>;
interrupts = <12>;
- display = <&display>;
- default-mode = <&mode0>;
- };
-
-VIA VT8500 Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - hactive, vactive: Display resolution
- - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
- in pixels
- vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
- lines
- - clock: displayclock in Hz
- - bpp: lcd panel bit-depth.
- <16> for RGB565, <32> for RGB888
-
-Optional properties (as per of_videomode_helper):
- - width-mm, height-mm: Display dimensions in mm
- - hsync-active-high (bool): Hsync pulse is active high
- - vsync-active-high (bool): Vsync pulse is active high
- - interlaced (bool): This is an interlaced mode
- - doublescan (bool): This is a doublescan mode
+ bits-per-pixel = <16>;
-Example:
- display: display@0 {
- modes {
- mode0: mode@0 {
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 800x480 {
+ clock-frequency = <0>; /* unused but required */
hactive = <800>;
vactive = <480>;
- hback-porch = <88>;
hfront-porch = <40>;
+ hback-porch = <88>;
hsync-len = <0>;
vback-porch = <32>;
vfront-porch = <11>;
vsync-len = <1>;
- clock = <0>; /* unused but required */
- bpp = <16>; /* non-standard but required */
};
};
};
+