diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r-- | Documentation/devicetree/bindings/arm/lpc32xx-mic.txt | 38 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/lpc32xx.txt | 8 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/mrvl/intc.txt | 40 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/mrvl/mrvl.txt (renamed from Documentation/devicetree/bindings/arm/mrvl.txt) | 8 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/mrvl/timer.txt | 13 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/arm/spear.txt | 18 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-nmk.txt | 31 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 18 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/i2c/mrvl-i2c.txt | 15 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/i2c/pnx.txt | 36 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/net/lpc-eth.txt | 24 |
11 files changed, 234 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt new file mode 100644 index 00000000000..539adca19e8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt @@ -0,0 +1,38 @@ +* NXP LPC32xx Main Interrupt Controller + (MIC, including SIC1 and SIC2 secondary controllers) + +Required properties: +- compatible: Should be "nxp,lpc3220-mic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: Empty for the interrupt controller itself +- #interrupt-cells: The number of cells to define the interrupts. Should be 2. + The first cell is the IRQ number + The second cell is used to specify mode: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Default for internal sources should be set to 4 (active high). +- reg: Should contain MIC registers location and length + +Examples: + /* + * MIC + */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0x40008000 0xC000>; + }; + + /* + * ADC + */ + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt new file mode 100644 index 00000000000..56ec8ddc4a3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt @@ -0,0 +1,8 @@ +NXP LPC32xx Platforms Device Tree Bindings +------------------------------------------ + +Boards with the NXP LPC32xx SoC shall have the following properties: + +Required root node property: + +compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt new file mode 100644 index 00000000000..80b9a94d9a2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -0,0 +1,40 @@ +* Marvell MMP Interrupt controller + +Required properties: +- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or + "mrvl,mmp2-mux-intc" +- reg : Address and length of the register set of the interrupt controller. + If the interrupt controller is intc, address and length means the range + of the whold interrupt controller. If the interrupt controller is mux-intc, + address and length means one register. Since address of mux-intc is in the + range of intc. mux-intc is secondary interrupt controller. +- reg-names : Name of the register set of the interrupt controller. It's + only required in mux-intc interrupt controller. +- interrupts : Should be the port interrupt shared by mux interrupts. It's + only required in mux-intc interrupt controller. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. +- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt + controller. +- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge + detection first. + +Example: + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + intcmux4@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index d8de933e9d8..117d741a2e4 100644 --- a/Documentation/devicetree/bindings/arm/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings PXA168 Aspenite Board Required root node properties: - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; + +PXA910 DKB Board +Required root node properties: + - compatible = "mrvl,pxa910-dkb"; + +MMP2 Brownstone Board +Required root node properties: + - compatible = "mrvl,mmp2-brownstone"; diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt b/Documentation/devicetree/bindings/arm/mrvl/timer.txt new file mode 100644 index 00000000000..9a6e251462e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt @@ -0,0 +1,13 @@ +* Marvell MMP Timer controller + +Required properties: +- compatible : Should be "mrvl,mmp-timer". +- reg : Address and length of the register set of timer controller. +- interrupts : Should be the interrupt number. + +Example: + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index f8e54f09232..aa5f355cc94 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties: Required root node property: compatible = "st,spear600"; + +Boards with the ST SPEAr300 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear300"; + +Boards with the ST SPEAr310 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear310"; + +Boards with the ST SPEAr320 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear320"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt new file mode 100644 index 00000000000..ee87467ad8d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt @@ -0,0 +1,31 @@ +Nomadik GPIO controller + +Required properties: +- compatible : Should be "st,nomadik-gpio". +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. +- #gpio-cells : Should be two: + The first cell is the pin number. + The second cell is used to specify optional parameters: + - bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller : Marks the device node as an interrupt controller. +- gpio-bank : Specifies which bank a controller owns. +- st,supports-sleepmode : Specifies whether controller can sleep or not + +Example: + + gpio1: gpio@8012e080 { + compatible = "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + supports-sleepmode; + gpio-bank = <1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 1e34cfe5ebe..05428f39d9a 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -3,19 +3,25 @@ Required properties: - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" - reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all gpio pins, if -- interrupt-name : Should be the name of irq resource. - one number. +- interrupts : Should be the port interrupt shared by all gpio pins. + There're three gpio interrupts in arch-pxa, and they're gpio0, + gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, + gpio_mux. +- interrupt-name : Should be the name of irq resource. Each interrupt + binds its interrupt-name. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + compatible = "mrvl,mmp-gpio"; reg = <0xd4019000 0x1000>; - interrupts = <49>, <17>, <18>; - interrupt-name = "gpio_mux", "gpio0", "gpio1"; + interrupts = <49>; + interrupt-name = "gpio_mux"; gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index 071eb3caae9..b891ee21835 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -3,34 +3,31 @@ Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a + - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required as shown in the example below. Recommended properties : - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : the interrupt number - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. + services interrupts for this device. If the parent is the default + interrupt controller in device tree, it could be ignored. - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. Examples: twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; }; twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; }; diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt new file mode 100644 index 00000000000..fe98ada33ee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/pnx.txt @@ -0,0 +1,36 @@ +* NXP PNX I2C Controller + +Required properties: + + - reg: Offset and length of the register set for the device + - compatible: should be "nxp,pnx-i2c" + - interrupts: configure one interrupt line + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: + + - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz + +Examples: + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&mic>; + interrupts = <50 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt new file mode 100644 index 00000000000..585021acd17 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lpc-eth.txt @@ -0,0 +1,24 @@ +* NXP LPC32xx SoC Ethernet Controller + +Required properties: +- compatible: Should be "nxp,lpc-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain ethernet controller interrupt + +Optional properties: +- phy-mode: String, operation mode of the PHY interface. + Supported values are: "mii", "rmii" (default) +- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering +- local-mac-address : 6 bytes, mac address + +Example: + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <29 0>; + + phy-mode = "rmii"; + use-iram; + }; |