diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
| -rw-r--r-- | Documentation/devicetree/bindings/memory.txt | 168 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt (renamed from Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt) | 8 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 17 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 18 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/pci/designware-pcie.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt (renamed from Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt) | 0 |
8 files changed, 42 insertions, 191 deletions
diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt deleted file mode 100644 index eb246936559..00000000000 --- a/Documentation/devicetree/bindings/memory.txt +++ /dev/null @@ -1,168 +0,0 @@ -*** Memory binding *** - -The /memory node provides basic information about the address and size -of the physical memory. This node is usually filled or updated by the -bootloader, depending on the actual memory configuration of the given -hardware. - -The memory layout is described by the following node: - -/ { - #address-cells = <(n)>; - #size-cells = <(m)>; - memory { - device_type = "memory"; - reg = <(baseaddr1) (size1) - (baseaddr2) (size2) - ... - (baseaddrN) (sizeN)>; - }; - ... -}; - -A memory node follows the typical device tree rules for "reg" property: -n: number of cells used to store base address value -m: number of cells used to store size value -baseaddrX: defines a base address of the defined memory bank -sizeX: the size of the defined memory bank - - -More than one memory bank can be defined. - - -*** Reserved memory regions *** - -In /memory/reserved-memory node one can create child nodes describing -particular reserved (excluded from normal use) memory regions. Such -memory regions are usually designed for the special usage by various -device drivers. A good example are contiguous memory allocations or -memory sharing with other operating system on the same hardware board. -Those special memory regions might depend on the board configuration and -devices used on the target system. - -Parameters for each memory region can be encoded into the device tree -with the following convention: - -[(label):] (name) { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <(address) (size)>; - (linux,default-contiguous-region); -}; - -compatible: one or more of: - - "linux,contiguous-memory-region" - enables binding of this - region to Contiguous Memory Allocator (special region for - contiguous memory allocations, shared with movable system - memory, Linux kernel-specific). - - "reserved-memory-region" - compatibility is defined, given - region is assigned for exclusive usage for by the respective - devices. - -reg: standard property defining the base address and size of - the memory region - -linux,default-contiguous-region: property indicating that the region - is the default region for all contiguous memory - allocations, Linux specific (optional) - -It is optional to specify the base address, so if one wants to use -autoconfiguration of the base address, '0' can be specified as a base -address in the 'reg' property. - -The /memory/reserved-memory node must contain the same #address-cells -and #size-cells value as the root node. - - -*** Device node's properties *** - -Once regions in the /memory/reserved-memory node have been defined, they -may be referenced by other device nodes. Bindings that wish to reference -memory regions should explicitly document their use of the following -property: - -memory-region = <&phandle_to_defined_region>; - -This property indicates that the device driver should use the memory -region pointed by the given phandle. - - -*** Example *** - -This example defines a memory consisting of 4 memory banks. 3 contiguous -regions are defined for Linux kernel, one default of all device drivers -(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the -framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB) -and one for multimedia processing (labelled multimedia_mem, placed at -0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000 -device for DMA memory allocations (Linux kernel drivers will use CMA is -available or dma-exclusive usage otherwise). 'multimedia_mem' is -assigned to scaler@12500000 and codec@12600000 devices for contiguous -memory allocations when CMA driver is enabled. - -The reason for creating a separate region for framebuffer device is to -match the framebuffer base address to the one configured by bootloader, -so once Linux kernel drivers starts no glitches on the displayed boot -logo appears. Scaller and codec drivers should share the memory -allocations. - -/ { - #address-cells = <1>; - #size-cells = <1>; - - /* ... */ - - memory { - reg = <0x40000000 0x10000000 - 0x50000000 0x10000000 - 0x60000000 0x10000000 - 0x70000000 0x10000000>; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - - /* - * global autoconfigured region for contiguous allocations - * (used only with Contiguous Memory Allocator) - */ - contig_region@0 { - compatible = "linux,contiguous-memory-region"; - reg = <0x0 0x4000000>; - linux,default-contiguous-region; - }; - - /* - * special region for framebuffer - */ - display_region: region@78000000 { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <0x78000000 0x800000>; - }; - - /* - * special region for multimedia processing devices - */ - multimedia_region: region@77000000 { - compatible = "linux,contiguous-memory-region"; - reg = <0x77000000 0x4000000>; - }; - }; - }; - - /* ... */ - - fb0: fb@12300000 { - status = "okay"; - memory-region = <&display_region>; - }; - - scaler: scaler@12500000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; - - codec: codec@12600000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; -}; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6d1c0988cfc..c67b975c890 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -1,11 +1,11 @@ -* Samsung Exynos specific extensions to the Synopsis Designware Mobile +* Samsung Exynos specific extensions to the Synopsys Designware Mobile Storage Host Controller -The Synopsis designware mobile storage host controller is used to interface +The Synopsys designware mobile storage host controller is used to interface a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsis dw mshc controller properties described -by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific -extensions to the Synopsis Designware Mobile Storage Host Controller. +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific +extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 8a3d91d47b6..c559f3f3630 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -1,11 +1,11 @@ -* Rockchip specific extensions to the Synopsis Designware Mobile +* Rockchip specific extensions to the Synopsys Designware Mobile Storage Host Controller -The Synopsis designware mobile storage host controller is used to interface +The Synopsys designware mobile storage host controller is used to interface a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsis dw mshc controller properties described -by synopsis-dw-mshc.txt and the properties used by the Rockchip specific -extensions to the Synopsis Designware Mobile Storage Host Controller. +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Rockchip specific +extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index cdcebea9c6f..066a78b034c 100644 --- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -1,14 +1,14 @@ -* Synopsis Designware Mobile Storage Host Controller +* Synopsys Designware Mobile Storage Host Controller -The Synopsis designware mobile storage host controller is used to interface +The Synopsys designware mobile storage host controller is used to interface a SoC with storage medium such as eMMC or SD/MMC cards. This file documents differences between the core mmc properties described by mmc.txt and the -properties used by the Synopsis Designware Mobile Storage Host Controller. +properties used by the Synopsys Designware Mobile Storage Host Controller. Required Properties: * compatible: should be - - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. + - snps,dw-mshc: for controllers compliant with synopsys dw-mshc. * #address-cells: should be 1. * #size-cells: should be 0. diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index df204e18e03..6a2a1160a70 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. +Required properties: +- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit + "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC + "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC + "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC + "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC + "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC + "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC + Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable - -When used with Renesas SDHI hardware, the following compatibility strings -configure various model-specific properties: - -"renesas,sh7372-sdhi": (default) compatible with SH7372 -"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to - wait for the interface to become idle. diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 2c6be0377f5..d2ea4605d07 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -86,6 +86,7 @@ General Properties: Clock Properties: + - fsl,cksel Timer reference clock source. - fsl,tclk-period Timer reference clock period in nanoseconds. - fsl,tmr-prsc Prescaler, divides the output clock. - fsl,tmr-add Frequency compensation value. @@ -97,7 +98,7 @@ Clock Properties: clock. You must choose these carefully for the clock to work right. Here is how to figure good values: - TimerOsc = system clock MHz + TimerOsc = selected reference clock MHz tclk_period = desired clock period nanoseconds NominalFreq = 1000 / tclk_period MHz FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0) @@ -114,6 +115,20 @@ Clock Properties: Pulse Per Second (PPS) signal, since this will be offered to the PPS subsystem to synchronize the Linux clock. + Reference clock source is determined by the value, which is holded + in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the + value, which will be directly written in those bits, that is why, + according to reference manual, the next clock sources can be used: + + <0> - external high precision timer reference clock (TSEC_TMR_CLK + input is used for this purpose); + <1> - eTSEC system clock; + <2> - eTSEC1 transmit clock; + <3> - RTC clock input. + + When this attribute is not used, eTSEC system clock will serve as + IEEE 1588 timer reference clock. + Example: ptp_clock@24E00 { @@ -121,6 +136,7 @@ Example: reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; interrupt-parent = < &ipic >; + fsl,cksel = <1>; fsl,tclk-period = <10>; fsl,tmr-prsc = <100>; fsl,tmr-add = <0x999999A4>; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index eabcb4b5db6..e216af35684 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,4 +1,4 @@ -* Synopsis Designware PCIe interface +* Synopsys Designware PCIe interface Required properties: - compatible: should contain "snps,dw-pcie" to identify the diff --git a/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt index c5e032c85bf..c5e032c85bf 100644 --- a/Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt +++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt |