diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
118 files changed, 5543 insertions, 100 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 91f26148af7..fc81a7d6b0f 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -1,3 +1,15 @@ +ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) +----------------------------------------------------------------------------- +ARM's oldest Linux-supported platform with connectors for different core +tiles of ARMv4, ARMv5 and ARMv6 type. + +Required properties (in root node): + compatible = "arm,integrator-ap"; /* Application Platform */ + compatible = "arm,integrator-cp"; /* Compact Platform */ + +FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. + + ARM Versatile Application and Platform Baseboards ------------------------------------------------- ARM's development hardware platform with connectors for customizable diff --git a/Documentation/devicetree/bindings/arm/bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm2835.txt new file mode 100644 index 00000000000..ac683480c48 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm2835.txt @@ -0,0 +1,8 @@ +Broadcom BCM2835 device tree bindings +------------------------------------------- + +Boards with the BCM2835 SoC shall have the following properties: + +Required root node property: + +compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt new file mode 100644 index 00000000000..6622bdb2e8b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt @@ -0,0 +1,17 @@ +Calxeda Highbank Combination Phys for SATA + +Properties: +- compatible : Should be "calxeda,hb-combophy" +- #phy-cells: Should be 1. +- reg : Address and size for Combination Phy registers. +- phydev: device ID for programming the combophy. + +Example: + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt new file mode 100644 index 00000000000..31af1cbb60b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt @@ -0,0 +1,17 @@ +* Marvell Tauros2 Cache + +Required properties: +- compatible : Should be "marvell,tauros2-cache". +- marvell,tauros2-cache-features : Specify the features supported for the + tauros2 cache. + The features including + CACHE_TAUROS2_PREFETCH_ON (1 << 0) + CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1) + The definition can be found at + arch/arm/include/asm/hardware/cache-tauros2.h + +Example: + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt new file mode 100644 index 00000000000..8c5907b9cae --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -0,0 +1,38 @@ +* MSM Timer + +Properties: + +- compatible : Should at least contain "qcom,msm-timer". More specific + properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general + purpose timer and a debug timer respectively. + +- interrupts : Interrupt indicating a match event. + +- reg : Specifies the base address of the timer registers. The second region + specifies an optional register used to configure the clock divider. + +- clock-frequency : The frequency of the timer in Hz. + +Optional: + +- cpu-offset : per-cpu offset used when the timer is accessed without the + CPU remapping facilities. The offset is cpu-offset * cpu-nr. + +Example: + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 3 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ccdd0e53451..d0051a75058 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,6 +36,9 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" +- OMAP3 Tobi with Overo : Commercial expansion board with daughter board + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 1c044eb320c..343781b9f24 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,8 +7,12 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" + "arm,cortex-a7-pmu" + "arm,cortex-a5-pmu" + "arm,arm11mpcore-pmu" "arm,arm1176-pmu" "arm,arm1136-pmu" - interrupts : 1 combined interrupt or 1 per core. diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt new file mode 100644 index 00000000000..9989eda755d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -0,0 +1,31 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt new file mode 100644 index 00000000000..d657832c681 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.txt @@ -0,0 +1,14 @@ +VIA/Wondermedia VT8500 Platforms Device Tree Bindings +--------------------------------------- + +Boards with the VIA VT8500 SoC shall have the following properties: +Required root node property: +compatible = "via,vt8500"; + +Boards with the Wondermedia WM8505 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8505"; + +Boards with the Wondermedia WM8650 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8650"; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt new file mode 100644 index 00000000000..0a4ce1051b0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt @@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt new file mode 100644 index 00000000000..521b9c7de93 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia VT8500 Power Management Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-pmc" +- reg : Should contain 1 register ranges(address and length) + +Example: + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt new file mode 100644 index 00000000000..901c73f0d8e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Timer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-timer" +- reg : Should contain 1 register ranges(address and length) +- interrupts : interrupt for the timer + +Example: + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt new file mode 100644 index 00000000000..0f7b9c2109f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -0,0 +1,25 @@ +* Xen hypervisor device tree bindings + +Xen ARM virtual platforms shall have a top-level "hypervisor" node with +the following properties: + +- compatible: + compatible = "xen,xen-<version>", "xen,xen"; + where <version> is the version of the Xen ABI of the platform. + +- reg: specifies the base physical address and size of a region in + memory where the grant table should be mapped to, using an + HYPERVISOR_memory_op hypercall. The memory region is large enough to map + the whole grant table (it is larger or equal to gnttab_max_grant_frames()). + +- interrupts: the interrupt used by Xen to inject event notifications. + A GIC node is also required. + + +Example (assuming #address-cells = <2> and #size-cells = <2>): + +hypervisor { + compatible = "xen,xen-4.3", "xen,xen"; + reg = <0 0xb0000000 0 0x20000>; + interrupts = <1 15 0xf08>; +}; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 8bb8a76d42e..b519f9b699c 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -8,9 +8,18 @@ Required properties: - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> +Optional properties: +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each + SATA port to a combophy and a lane within that + combophy +- dma-coherent : Present if dma operations are coherent + Example: sata@ffe08000 { compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x1000>; interrupts = <115>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + }; diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt new file mode 100644 index 00000000000..95ec7f825ed --- /dev/null +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -0,0 +1,17 @@ +* ARASAN PATA COMPACT FLASH CONTROLLER + +Required properties: +- compatible: "arasan,cf-spear1340" +- reg: Address range of the CF registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the CF interrupt number + +Example: + + cf@fc000000 { + compatible = "arasan,cf-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt new file mode 100644 index 00000000000..d2fe064a828 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -0,0 +1,10 @@ +* OMAP OCP2SCP - ocp interface to scp interface + +properties: +- compatible : Should be "ti,omap-ocp2scp" +- #address-cells, #size-cells : Must be present if the device has sub-nodes +- ranges : the child address space are mapped 1:1 onto the parent address space +- ti,hwmods : must be "ocp2scp_usb_phy" + +Sub-nodes: +All the devices connected to ocp2scp are described using sub-node to ocp2scp diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt new file mode 100644 index 00000000000..a0b867ef8d9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -0,0 +1,76 @@ +* Clock bindings for Freescale i.MX23 + +Required properties: +- compatible: Should be "fsl,imx23-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX23 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_pwr 41 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 32 */ + ... + "end_of_list"; +}; + +auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt new file mode 100644 index 00000000000..aa2af2866fe --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -0,0 +1,99 @@ +* Clock bindings for Freescale i.MX28 + +Required properties: +- compatible: Should be "fsl,imx28-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX28 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_pwr 62 + usb1_pwr 63 + enet_out 64 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 45 */ + ... + "end_of_list"; +}; + +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt new file mode 100644 index 00000000000..492bd991d52 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -0,0 +1,222 @@ +* Clock bindings for Freescale i.MX6 Quad + +Required properties: +- compatible: Should be "fsl,imx6q-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX6Q +clocks and IDs. + + Clock ID + --------------------------- + dummy 0 + ckil 1 + ckih 2 + osc 3 + pll2_pfd0_352m 4 + pll2_pfd1_594m 5 + pll2_pfd2_396m 6 + pll3_pfd0_720m 7 + pll3_pfd1_540m 8 + pll3_pfd2_508m 9 + pll3_pfd3_454m 10 + pll2_198m 11 + pll3_120m 12 + pll3_80m 13 + pll3_60m 14 + twd 15 + step 16 + pll1_sw 17 + periph_pre 18 + periph2_pre 19 + periph_clk2_sel 20 + periph2_clk2_sel 21 + axi_sel 22 + esai_sel 23 + asrc_sel 24 + spdif_sel 25 + gpu2d_axi 26 + gpu3d_axi 27 + gpu2d_core_sel 28 + gpu3d_core_sel 29 + gpu3d_shader_sel 30 + ipu1_sel 31 + ipu2_sel 32 + ldb_di0_sel 33 + ldb_di1_sel 34 + ipu1_di0_pre_sel 35 + ipu1_di1_pre_sel 36 + ipu2_di0_pre_sel 37 + ipu2_di1_pre_sel 38 + ipu1_di0_sel 39 + ipu1_di1_sel 40 + ipu2_di0_sel 41 + ipu2_di1_sel 42 + hsi_tx_sel 43 + pcie_axi_sel 44 + ssi1_sel 45 + ssi2_sel 46 + ssi3_sel 47 + usdhc1_sel 48 + usdhc2_sel 49 + usdhc3_sel 50 + usdhc4_sel 51 + enfc_sel 52 + emi_sel 53 + emi_slow_sel 54 + vdo_axi_sel 55 + vpu_axi_sel 56 + cko1_sel 57 + periph 58 + periph2 59 + periph_clk2 60 + periph2_clk2 61 + ipg 62 + ipg_per 63 + esai_pred 64 + esai_podf 65 + asrc_pred 66 + asrc_podf 67 + spdif_pred 68 + spdif_podf 69 + can_root 70 + ecspi_root 71 + gpu2d_core_podf 72 + gpu3d_core_podf 73 + gpu3d_shader 74 + ipu1_podf 75 + ipu2_podf 76 + ldb_di0_podf 77 + ldb_di1_podf 78 + ipu1_di0_pre 79 + ipu1_di1_pre 80 + ipu2_di0_pre 81 + ipu2_di1_pre 82 + hsi_tx_podf 83 + ssi1_pred 84 + ssi1_podf 85 + ssi2_pred 86 + ssi2_podf 87 + ssi3_pred 88 + ssi3_podf 89 + uart_serial_podf 90 + usdhc1_podf 91 + usdhc2_podf 92 + usdhc3_podf 93 + usdhc4_podf 94 + enfc_pred 95 + enfc_podf 96 + emi_podf 97 + emi_slow_podf 98 + vpu_axi_podf 99 + cko1_podf 100 + axi 101 + mmdc_ch0_axi_podf 102 + mmdc_ch1_axi_podf 103 + arm 104 + ahb 105 + apbh_dma 106 + asrc 107 + can1_ipg 108 + can1_serial 109 + can2_ipg 110 + can2_serial 111 + ecspi1 112 + ecspi2 113 + ecspi3 114 + ecspi4 115 + ecspi5 116 + enet 117 + esai 118 + gpt_ipg 119 + gpt_ipg_per 120 + gpu2d_core 121 + gpu3d_core 122 + hdmi_iahb 123 + hdmi_isfr 124 + i2c1 125 + i2c2 126 + i2c3 127 + iim 128 + enfc 129 + ipu1 130 + ipu1_di0 131 + ipu1_di1 132 + ipu2 133 + ipu2_di0 134 + ldb_di0 135 + ldb_di1 136 + ipu2_di1 137 + hsi_tx 138 + mlb 139 + mmdc_ch0_axi 140 + mmdc_ch1_axi 141 + ocram 142 + openvg_axi 143 + pcie_axi 144 + pwm1 145 + pwm2 146 + pwm3 147 + pwm4 148 + per1_bch 149 + gpmi_bch_apb 150 + gpmi_bch 151 + gpmi_io 152 + gpmi_apb 153 + sata 154 + sdma 155 + spba 156 + ssi1 157 + ssi2 158 + ssi3 159 + uart_ipg 160 + uart_serial 161 + usboh3 162 + usdhc1 163 + usdhc2 164 + usdhc3 165 + usdhc4 166 + vdo_axi 167 + vpu_axi 168 + cko1 169 + pll1_sys 170 + pll2_bus 171 + pll3_usb_otg 172 + pll4_audio 173 + pll5_video 174 + pll6_mlb 175 + pll7_usb_host 176 + pll8_enet 177 + ssi1_ipg 178 + ssi2_ipg 179 + ssi3_ipg 180 + rom 181 + usbphy1 182 + usbphy2 183 + ldb_di0_div_3_5 184 + ldb_di1_div_3_5 185 + +Examples: + +clks: ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + clock-output-names = ... + "uart_ipg", + "uart_serial", + ...; +}; + +uart1: serial@02020000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt new file mode 100644 index 00000000000..a880c70d004 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vt8500.txt @@ -0,0 +1,72 @@ +Device Tree Clock bindings for arch-vt8500 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock + "wm,wm8650-pll-clock" - for a WM8650 PLL clock + "via,vt8500-device-clock" - for a VT/WM device clock + +Required properties for PLL clocks: +- reg : shall be the control register offset from PMC base for the pll clock. +- clocks : shall be the input parent clock phandle for the clock. This should + be the reference clock. +- #clock-cells : from common clock binding; shall be set to 0. + +Required properties for device clocks: +- clocks : shall be the input parent clock phandle for the clock. This should + be a pll output. +- #clock-cells : from common clock binding; shall be set to 0. + + +Device Clocks + +Device clocks are required to have one or both of the following sets of +properties: + + +Gated device clocks: + +Required properties: +- enable-reg : shall be the register offset from PMC base for the enable + register. +- enable-bit : shall be the bit within enable-reg to enable/disable the clock. + + +Divisor device clocks: + +Required property: +- divisor-reg : shall be the register offset from PMC base for the divisor + register. +Optional property: +- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f + if not specified. + + +For example: + +ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; +}; + +plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; +}; + +sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; +}; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt new file mode 100644 index 00000000000..4416ccc3347 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -0,0 +1,55 @@ +Generic CPU0 cpufreq driver + +It is a generic cpufreq driver for CPU0 frequency management. It +supports both uniprocessor (UP) and symmetric multiprocessor (SMP) +systems which share clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt + for details + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + transition-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index bf57ecd5d73..bd7ce120bc1 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -9,6 +9,7 @@ Copyright (C) 2008-2011 Freescale Semiconductor Inc. -Run Time Integrity Check (RTIC) Node -Run Time Integrity Check (RTIC) Memory Node -Secure Non-Volatile Storage (SNVS) Node + -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node -Full Example NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator @@ -294,6 +295,27 @@ Secure Non-Volatile Storage (SNVS) Node address and length of the SEC4 configuration registers. + - #address-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. Must + have a value of 1. + + - #size-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. Must have a value of 1. + + - ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical address + range of the SNVS register space. A triplet that includes + the child address, parent address, & length. + - interrupts Usage: required Value type: <prop_encoded-array> @@ -314,11 +336,34 @@ EXAMPLE sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; }; ===================================================================== +Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node + + A SNVS child node that defines SNVS LP RTC. + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical + address and length of the SNVS LP configuration registers. + +EXAMPLE + sec_mon_rtc_lp@314000 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; + +===================================================================== FULL EXAMPLE crypto: crypto@300000 { @@ -390,8 +435,14 @@ FULL EXAMPLE sec_mon: sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; + + sec_mon_rtc_lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; }; ===================================================================== diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 00000000000..47229b1a594 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,20 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible : should be "marvell,orion-crypto" +- reg : base physical address of the engine and length of memory mapped + region, followed by base physical address of sram and its memory + length +- reg-names : "regs" , "sram"; +- interrupts : interrupt number + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0x4000000 0x800>; + reg-names = "regs" , "sram"; + interrupts = <22>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt index a4cd273b2a6..36e27d54260 100644 --- a/Documentation/devicetree/bindings/dma/arm-pl330.txt +++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt @@ -9,6 +9,9 @@ Required properties: region. - interrupts: interrupt number to the cpu. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: pdma0: pdma@12680000 { diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt new file mode 100644 index 00000000000..a4fa4efa1d8 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -0,0 +1,74 @@ +* MARVELL MMP DMA controller + +Marvell Peripheral DMA Controller +Used platfroms: pxa688, pxa910, pxa3xx, etc + +Required properties: +- compatible: Should be "marvell,pdma-1.0" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for pdma device +- #dma-channels: Number of DMA channels supported by the controller. + +"marvell,pdma-1.0" +Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. + +Examples: + +/* + * Each channel has specific irq + * ICU parse out irq channel from ICU register, + * while DMA controller may not able to distinguish the irq channel + * Using this method, interrupt-parent is required as demuxer + * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, + * 18~21 is ADMA irq + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + interrupt-parent = <&intcmux32>; + #dma-channels = <16>; + }; + +/* + * One irq for all channels + * Dmaengine driver (DMA controller) distinguish irq channel via + * parsing internal register + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-channels = <16>; + }; + + +Marvell Two Channel DMA Controller used specifically for audio +Used platfroms: pxa688, pxa910 + +Required properties: +- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for dma device + +"marvell,adma-1.0" used on pxa688 +"marvell,pxa910-squ" used on pxa910 + +Examples: + +/* each channel has specific irq */ +adma0: dma-controller@d42a0800 { + compatible = "marvell,adma-1.0"; + reg = <0xd42a0800 0x100>; + interrupts = <18 19>; + interrupt-parent = <&intcmux32>; + }; + +/* One irq for all channels */ +squ: dma-controller@d42a0800 { + compatible = "marvell,pxa910-squ"; + reg = <0xd42a0800 0x100>; + interrupts = <46>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt new file mode 100644 index 00000000000..cc2608021f2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt @@ -0,0 +1,22 @@ +* Generic 8-bits shift register GPIO driver + +Required properties: +- compatible : Should be "fairchild,74hc595" +- reg : chip select number +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +- registers-number: Number of daisy-chained shift registers + +Example: + +gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <4>; + spi-max-frequency = <100000>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt new file mode 100644 index 00000000000..af66b272483 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt @@ -0,0 +1,34 @@ +Avionic Design N-bit GPIO expander bindings + +Required properties: +- compatible: should be "ad,gpio-adnp" +- reg: The I2C slave address for this device. +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- #gpio-cells: Should be 2. The first cell is the GPIO number and the + second cell is used to specify optional parameters: + - bit 0: polarity (0: normal, 1: inverted) +- gpio-controller: Marks the device as a GPIO controller +- nr-gpios: The number of pins supported by the controller. + +The GPIO expander can optionally be used as an interrupt controller, in +which case it uses the default two cell specifier as described in +Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. + +Example: + + gpioext: gpio-controller@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt new file mode 100644 index 00000000000..2dd457a3469 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -0,0 +1,25 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + +Optional properties: +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt new file mode 100644 index 00000000000..a6f3bec1da7 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -0,0 +1,53 @@ +* Marvell EBU GPIO controller + +Required properties: + +- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio" + or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for + Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada + 370. "marvell,mv78200-gpio" should be used for the Discovery + MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP + SoCs (MV78230, MV78260, MV78460). + +- reg: Address and length of the register set for the device. Only one + entry is expected, except for the "marvell,armadaxp-gpio" variant + for which two entries are expected: one for the general registers, + one for the per-cpu registers. + +- interrupts: The list of interrupts that are used for all the pins + managed by this GPIO bank. There can be more than one interrupt + (example: 1 interrupt per 8 pins on Armada XP, which means 4 + interrupts per bank of 32 GPIOs). + +- interrupt-controller: identifies the node as an interrupt controller + +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. Should be two. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +- gpio-controller: marks the device node as a gpio controller + +- ngpios: number of GPIOs this controller has + +- #gpio-cells: Should be two. The first cell is the pin number. The + second cell is reserved for flags, unused at the moment. + +Example: + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt index 5375625e8cd..f1e5dfecf55 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -39,3 +39,46 @@ Example: #gpio-cells = <4>; gpio-controller; }; + + +Samsung S3C24XX GPIO Controller + +Required properties: +- compatible: Compatible property value should be "samsung,s3c24xx-gpio". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes + should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [flags and pull up/down] + + Values for gpio specifier: + - Pin number: depending on the controller a number from 0 up to 15. + - Mux function: Depending on the SoC and the gpio bank the gpio can be set + as input, output or a special function + - Flags and Pull Up/Down: the values to use differ for the individual SoCs + example S3C2416/S3C2450: + 0 - Pull Up/Down Disabled. + 1 - Pull Down Enabled. + 2 - Pull Up Enabled. + Bit 16 (0x00010000) - Input is active low. + Consult the user manual for the correct values of Mux and Pull Up/Down. + +- gpio-controller: Specifies that the node is a gpio controller. +- #address-cells: should be 1. +- #size-cells: should be 1. + +Example: + + gpa: gpio-controller@56000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,s3c24xx-gpio"; + reg = <0x56000000 0x10>; + #gpio-cells = <3>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 16695d9cf1e..66788fda1db 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. +- ti,use-leds : Enables LEDA and LEDB outputs if set +- ti,debounce : if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -20,4 +25,5 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; + ti,use-leds; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt new file mode 100644 index 00000000000..f4dc5233167 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt @@ -0,0 +1,24 @@ +VIA/Wondermedia VT8500 GPIO Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" + or "wm,wm8650-gpio" depending on your SoC +- reg : Should contain 1 register range (address and length) +- #gpio-cells : should be <3>. + 1) bank + 2) pin number + 3) flags - should be 0 + +Example: + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + vibrate { + gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ + }; diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 9bb308abd22..edc83c1c0d5 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/gpio.txt. Active low LEDs should be + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1a85f986961..2f5322b119e 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller +ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt new file mode 100644 index 00000000000..313abefa37c --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -0,0 +1,38 @@ +Device-Tree bindings for input/gpio_keys_polled.c keyboard driver + +Required properties: + - compatible = "gpio-keys-polled"; + - poll-interval: Poll interval time in milliseconds + +Optional properties: + - autorepeat: Boolean, Enable auto repeat feature of Linux input + subsystem. + +Each button (key) is represented as a sub-node of "gpio-keys-polled": +Subnode properties: + + - gpios: OF device-tree gpio specification. + - label: Descriptive name of the key. + - linux,code: Keycode to emit. + +Optional subnode-properties: + - linux,input-type: Specify event type this button/key generates. + If not specified defaults to <1> == EV_KEY. + - debounce-interval: Debouncing interval time in milliseconds. + If not specified defaults to 5. + - gpio-key,wakeup: Boolean, button can wake-up the system. + +Example nodes: + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio1 0 1>; + }; + ... diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt new file mode 100644 index 00000000000..331549593ed --- /dev/null +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -0,0 +1,36 @@ +Rotary encoder DT bindings + +Required properties: +- gpios: a spec for two GPIOs to be used + +Optional properties: +- linux,axis: the input subsystem axis to map to this rotary encoder. + Defaults to 0 (ABS_X / REL_X) +- rotary-encoder,steps: Number of steps in a full turnaround of the + encoder. Only relevant for absolute axis. Defaults to 24 which is a + typical value for such devices. +- rotary-encoder,relative-axis: register a relative axis rather than an + absolute one. Relative axis will only generate +1/-1 events on the input + device, hence no steps need to be passed. +- rotary-encoder,rollover: Automatic rollove when the rotary value becomes + greater than the specified steps or smaller than 0. For absolute axis only. +- rotary-encoder,half-period: Makes the driver work on half-period mode. + +See Documentation/input/rotary-encoder.txt for more information. + +Example: + + rotary@0 { + compatible = "rotary-encoder"; + gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,relative-axis; + }; + + rotary@1 { + compatible = "rotary-encoder"; + gpios = <&gpio 21 0>, <&gpio 22 0>; + linux,axis = <1>; /* ABS_Y */ + rotary-encoder,steps = <24>; + rotary-encoder,rollover; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt new file mode 100644 index 00000000000..548892c08c5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -0,0 +1,110 @@ +BCM2835 Top-Level ("ARMCTRL") Interrupt Controller + +The BCM2835 contains a custom top-level interrupt controller, which supports +72 interrupt sources using a 2-level register scheme. The interrupt +controller, or the HW block containing it, is referred to occasionally +as "armctrl" in the SoC documentation, hence naming of this binding. + +Required properties: + +- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + + The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic + pending" register, or 1/2 respectively for interrupts in the "IRQ pending + 1/2" register. + + The 2nd cell contains the interrupt number within the bank. Valid values + are 0..7 for bank 0, and 0..31 for bank 1. + +The interrupt sources are as follows: + +Bank 0: +0: ARM_TIMER +1: ARM_MAILBOX +2: ARM_DOORBELL_0 +3: ARM_DOORBELL_1 +4: VPU0_HALTED +5: VPU1_HALTED +6: ILLEGAL_TYPE0 +7: ILLEGAL_TYPE1 + +Bank 1: +0: TIMER0 +1: TIMER1 +2: TIMER2 +3: TIMER3 +4: CODEC0 +5: CODEC1 +6: CODEC2 +7: VC_JPEG +8: ISP +9: VC_USB +10: VC_3D +11: TRANSPOSER +12: MULTICORESYNC0 +13: MULTICORESYNC1 +14: MULTICORESYNC2 +15: MULTICORESYNC3 +16: DMA0 +17: DMA1 +18: VC_DMA2 +19: VC_DMA3 +20: DMA4 +21: DMA5 +22: DMA6 +23: DMA7 +24: DMA8 +25: DMA9 +26: DMA10 +27: DMA11 +28: DMA12 +29: AUX +30: ARM +31: VPUDMA + +Bank 2: +0: HOSTPORT +1: VIDEOSCALER +2: CCP2TX +3: SDC +4: DSI0 +5: AVE +6: CAM0 +7: CAM1 +8: HDMI0 +9: HDMI1 +10: PIXELVALVE1 +11: I2CSPISLV +12: DSI1 +13: PWA0 +14: PWA1 +15: CPR +16: SMI +17: GPIO0 +18: GPIO1 +19: GPIO2 +20: GPIO3 +21: VC_I2C +22: VC_SPI +23: VC_I2SPCM +24: VC_SDIO +25: VC_UART +26: SLIMBUS +27: VEC +28: CPG +29: RNG +30: VC_ARASANSDIO +31: AVSPMON + +Example: + +intc: interrupt-controller { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt new file mode 100644 index 00000000000..72a06c0ab1d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -0,0 +1,95 @@ +Specifying interrupt information for devices +============================================ + +1) Interrupt client nodes +------------------------- + +Nodes that describe devices which generate interrupts must contain an +"interrupts" property. This property must contain a list of interrupt +specifiers, one per output interrupt. The format of the interrupt specifier is +determined by the interrupt controller to which the interrupts are routed; see +section 2 below for details. + +The "interrupt-parent" property is used to specify the controller to which +interrupts are routed and contains a single phandle referring to the interrupt +controller node. This property is inherited, so it may be specified in an +interrupt client node or in any of its parent nodes. + +2) Interrupt controller nodes +----------------------------- + +A device is marked as an interrupt controller with the "interrupt-controller" +property. This is a empty, boolean property. An additional "#interrupt-cells" +property defines the number of cells needed to specify a single interrupt. + +It is the responsibility of the interrupt controller's binding to define the +length and format of the interrupt specifier. The following two variants are +commonly used: + + a) one cell + ----------- + The #interrupt-cells property is set to 1 and the single cell defines the + index of the interrupt within the controller. + + Example: + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + b) two cells + ------------ + The #interrupt-cells property is set to 2 and the first cell defines the + index of the interrupt within the controller, while the second cell is used + to specify any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + + Example: + + i2c@7000c000 { + gpioext: gpio-adnp@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <1>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; + + sx8634@2b { + compatible = "smtc,sx8634"; + reg = <0x2b>; + + interrupt-parent = <&gpioext>; + interrupts = <3 0x8>; + + #address-cells = <1>; + #size-cells = <0>; + + threshold = <0x40>; + sensitivity = <7>; + }; + }; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt new file mode 100644 index 00000000000..9ceb19e0c7f --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt @@ -0,0 +1,52 @@ +* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin + +Required properties: +- compatible : Should be "jedec,lpddr2-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32> +- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32> + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type <u32> and the default unit is ps (pico seconds). Parameters with +a different unit have a suffix indicating the unit such as 'tRAS-max-ns' +- tRCD +- tWR +- tRAS-min +- tRRD +- tWTR +- tXP +- tRTP +- tDQSCK-max +- tFAW +- tZQCS +- tZQinit +- tRPab +- tZQCL +- tCKESR +- tRAS-max-ns +- tDQSCK-max-derated + +Example: + +timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; +}; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt new file mode 100644 index 00000000000..58354a075e1 --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt @@ -0,0 +1,102 @@ +* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 + +Required properties: +- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", + "jedec,lpddr2-s4" + + "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type + + "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type + + "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type + +- density : <u32> representing density in Mb (Mega bits) + +- io-width : <u32> representing bus width. Possible values are 8, 16, and 32 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRRD-min-tck +- tWTR-min-tck +- tXP-min-tck +- tRTP-min-tck +- tCKE-min-tck +- tRPab-min-tck +- tRCD-min-tck +- tWR-min-tck +- tRASmin-min-tck +- tCKESR-min-tck +- tFAW-min-tck + +Child nodes: +- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. Please see Documentation/devicetree/ + bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + +Example: + +elpida_ECB240ABACN : lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + +} diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt new file mode 100644 index 00000000000..0604d42f38d --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -0,0 +1,30 @@ +* Samsung Exynos5 G-Scaler device + +G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. + +Required properties: +- compatible: should be "samsung,exynos5-gsc" +- reg: should contain G-Scaler physical address location and length. +- interrupts: should contain G-Scaler interrupt number + +Example: + +gsc_0: gsc@0x13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; +}; + +Aliases: +Each G-Scaler node should have a numbered alias in the aliases node, +in the form of gscN, N = 0...3. G-Scaler driver uses these aliases +to retrieve the device IDs using "of_alias_get_id()" call. + +Example: + +aliases { + gsc0 =&gsc_0; + gsc1 =&gsc_1; + gsc2 =&gsc_2; + gsc3 =&gsc_3; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt new file mode 100644 index 00000000000..938f8e1ba20 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -0,0 +1,55 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> + is the IP revision of the specific EMIF instance. + +- phy-type : <u32> indicating the DDR phy type. Following are the + allowed values + <1> : Attila PHY + <2> : Intelli PHY + +- device-handle : phandle to a "lpddr2" node representing the memory part + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif<n>" where <n> is the number of the EMIF + instance with base 1. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-dll-calib-ctrl: Have this property if the controller + supports dll calibration control + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + device-handle = <&elpida_ECB240ABACN>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +}; diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt new file mode 100644 index 00000000000..63f3ee33759 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt @@ -0,0 +1,85 @@ +* Marvell 88PM860x Power Management IC + +Required parent device properties: +- compatible : "marvell,88pm860x" +- reg : the I2C slave address for the 88pm860x chip +- interrupts : IRQ line for the 88pm860x chip +- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the 88pm860x local IRQ number + +Optional parent device properties: +- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read +- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address + of one chip, and this property stores the I2C address of + another chip. + +88pm860x consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +88pm860x-onkey : : On key +88pm860x-rtc : : RTC +88pm8607 : : Regulators +88pm860x-backlight : : Backlight +88pm860x-led : : Led +88pm860x-touch : : Touchscreen + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 69e757a657a..ce83c8d3c00 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -23,6 +23,7 @@ Device IRQ Names Supply Names Description ab8500-bm : : : Battery Manager ab8500-btemp : : : Battery Temperature ab8500-charger : : : Battery Charger +ab8500-codec : : : Audio Codec ab8500-fg : : : Fuel Gauge ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : @@ -52,6 +53,14 @@ Optional child device properties: supplied in the interrupts property - <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree +Non-standard child device properties: + - Audio CODEC: + - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential) + - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) + ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ @@ -110,6 +119,12 @@ ab8500@5 { compatible = "stericsson,ab8500-pwm"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt new file mode 100644 index 00000000000..fe8150bb324 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -0,0 +1,20 @@ +* System Controller Registers R/W driver + +System controller node represents a register region containing a set +of miscellaneous registers. The registers are not cohesive enough to +represent as any specific type of device. The typical use-case is for +some other node's driver, or platform-specific code, to acquire a +reference to the syscon node (e.g. by phandle, node path, or search +using a specific compatible value), interrogate the node (or associated +OS driver) to determine the location of the registers, and access the +registers directly. + +Required properties: +- compatible: Should contain "syscon". +- reg: the register region can be accessed from syscon + +Examples: +gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index db03599ae4d..2e3304888ff 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -59,6 +59,8 @@ Optional properties: in TPS6591X datasheet) - ti,en-gpio-sleep: enable sleep control for gpios There should be 9 entries here, one for each gpio. +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep @@ -79,6 +81,8 @@ Example: #interrupt-cells = <2>; interrupt-controller; + ti,system-power-controller; + ti,vmbch-threshold = 0; ti,vmbch2-threshold = 0; ti,en-ck32k-xtal; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt new file mode 100644 index 00000000000..414d2ae0adf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt @@ -0,0 +1,46 @@ +Texas Instruments TWL family (twl4030) audio module + +The audio module inside the TWL family consist of an audio codec and a vibra +driver. + +Required properties: +- compatible : must be "ti,twl4030-audio" + +Optional properties, nodes: + +Audio functionality: +- codec { }: Need to be present if the audio functionality is used. Within this + section the following options can be used: +- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts + from the start of the recorded sample (in ms) +-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise +-ti,hs_extmute: Use external mute for HS pop reduction +-ti,hs_extmute_gpio: Use external GPIO to control the external mute +-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the + valid values. + +Vibra functionality +- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if + missing or it is 0, the vibra functionality is disabled. + +Example: +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + ti,enable-vibra = <1>; + + codec { + ti,ramp_delay_value = <3>; + }; + + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index c855240f3a0..0f5dd709d75 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -1,7 +1,7 @@ Texas Instruments TWL6040 family -The TWL6040s are 8-channel high quality low-power audio codecs providing audio -and vibra functionality on OMAP4+ platforms. +The TWL6040s are 8-channel high quality low-power audio codecs providing audio, +vibra and GPO functionality on OMAP4+ platforms. They are connected ot the host processor via i2c for commands, McPDM for audio data and commands. @@ -10,6 +10,8 @@ Required properties: - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC - interrupt-parent: The parent interrupt controller +- gpio-controller: +- #gpio-cells = <1>: twl6040 provides GPO lines. - twl6040,audpwron-gpio: Power on GPIO line for the twl6040 - vio-supply: Regulator for the twl6040 VIO supply @@ -37,7 +39,6 @@ Example: &i2c1 { twl6040: twl@4b { compatible = "ti,twl6040"; - reg = <0x4b>; interrupts = <0 119 4>; interrupt-parent = <&gic>; @@ -60,3 +61,5 @@ Example: }; }; }; + +/include/ "twl6040.dtsi" diff --git a/Documentation/devicetree/bindings/misc/at25.txt b/Documentation/devicetree/bindings/misc/at25.txt index ab3c327929d..1d3447165c3 100644 --- a/Documentation/devicetree/bindings/misc/at25.txt +++ b/Documentation/devicetree/bindings/misc/at25.txt @@ -1,21 +1,35 @@ -Atmel AT25 eeprom +EEPROMs (SPI) compatible with Atmel at25. Required properties: - compatible : "atmel,at25". - reg : chip select number - spi-max-frequency : max spi frequency to use +- pagesize : size of the eeprom page +- size : total eeprom size in bytes +- address-width : number of address bits (one of 8, 16, or 24) +Optional properties: +- spi-cpha : SPI shifted clock phase, as per spi-bus bindings. +- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. +- read-only : this parameter-less property disables writes to the eeprom + +Obsolete legacy properties are can be used in place of "size", "pagesize", +"address-width", and "read-only": - at25,byte-len : total eeprom size in bytes - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h - at25,page-size : size of the eeprom page -Examples: -at25@0 { - compatible = "atmel,at25"; - reg = <0> - spi-max-frequency = <5000000>; +Additional compatible properties are also allowed. + +Example: + at25@0 { + compatible = "atmel,at25", "st,m95256"; + reg = <0> + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; - at25,byte-len = <0x8000>; - at25,addr-mode = <2>; - at25,page-size = <64>; -}; + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt new file mode 100644 index 00000000000..5bdfffb0b9f --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt @@ -0,0 +1,41 @@ +IFM camera sensor interface on mpc5200 LocalPlus bus + +Required properties: +- compatible: "ifm,o2d-csi" +- reg: specifies sensor chip select number and associated address range +- interrupts: external interrupt line number and interrupt sense mode + of the interrupt line signaling frame valid events +- gpios: three gpio-specifiers for "capture", "reset" and "master enable" + GPIOs (strictly in this order). +- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor + clock generator. This node is usually a general purpose timer controller. +- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25) +- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16) +- ifm,csi-wait-cycles: sensor bus wait cycles + +Optional properties: +- ifm,csi-byte-swap: if this property is present, the byte swapping on + the bus will be enabled. + +Example: + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */ + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-clk-handle = <&timer7>; + gpios = <&gpio_simple 23 0 /* image_capture */ + &gpio_simple 26 0 /* image_reset */ + &gpio_simple 29 0>; /* image_master_en */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + +The base address of the used chip select is specified in the +ranges property of the parent localbus node, for example: + + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt new file mode 100644 index 00000000000..6def86f6b05 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/lis302.txt @@ -0,0 +1,112 @@ +LIS302 accelerometer devicetree bindings + +This device is matched via its bus drivers, and has a number of properties +that apply in on the generic device (independent from the bus). + + +Required properties for the SPI bindings: + - compatible: should be set to "st,lis3lv02d_spi" + - reg: the chipselect index + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless + constrained by external circuitry + - interrupts: the interrupt generated by the device + +Required properties for the I2C bindings: + - compatible: should be set to "st,lis3lv02d" + - reg: i2c slave address + - Vdd-supply: The input supply for Vdd + - Vdd_IO-supply: The input supply for Vdd_IO + + +Optional properties for all bus drivers: + + - st,click-single-{x,y,z}: if present, tells the device to issue an + interrupt on single click events on the + x/y/z axis. + - st,click-double-{x,y,z}: if present, tells the device to issue an + interrupt on double click events on the + x/y/z axis. + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold + - st,click-click-time-limit: click time limit, from 0 to 127.5msec + with step of 0.5 msec + - st,click-latency: click latency, from 0 to 255 msec with + step of 1 msec. + - st,click-window: click window, from 0 to 255 msec with + step of 1 msec. + - st,irq{1,2}-disable: disable IRQ 1/2 + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-click: raise IRQ 1/2 on click condition + - st,irq-open-drain: consider IRQ lines open-drain + - st,irq-active-low: make IRQ lines active low + - st,wu-duration-1: duration register for Free-Fall/Wake-Up + interrupt 1 + - st,wu-duration-2: duration register for Free-Fall/Wake-Up + interrupt 2 + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of + highpass cut-off frequency + - st,hipass{1,2}-disable: disable highpass 1/2. + - st,default-rate=: set the default rate + - st,axis-{x,y,z}=: set the axis to map to the three coordinates + - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis + (used by self-test) + + +Example for a SPI device node: + + lis302@0 { + compatible = "st,lis302dl-spi"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 0>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; + +Example for a I2C device node: + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa..1dd622546d0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,<chip>-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt new file mode 100644 index 00000000000..f1421e2bbab --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -0,0 +1,31 @@ +PXA3xx NAND DT bindings + +Required properties: + + - compatible: Should be "marvell,pxa3xx-nand" + - reg: The register base for the controller + - interrupts: The interrupt to map + - #address-cells: Set to <1> if the node includes partitions + +Optional properties: + + - marvell,nand-enable-arbiter: Set to enable the bus arbiter + - marvell,nand-keep-config: Set to keep the NAND controller config as set + by the bootloader + - num-cs: Number of chipselect lines to usw + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + + marvell,nand-enable-arbiter; + marvell,nand-keep-config; + num-cs = <1>; + + /* partitions (optional) */ + }; + diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt index 411727a3f82..c8ae996bd8f 100644 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt @@ -6,6 +6,9 @@ Required properties: - interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: ethernet@fff50000 { diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt new file mode 100644 index 00000000000..8f1ae81228e --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -0,0 +1,49 @@ +Bosch C_CAN/D_CAN controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible : Should be "bosch,c_can" for C_CAN controllers and + "bosch,d_can" for D_CAN controllers. +- reg : physical base address and size of the C_CAN/D_CAN + registers map +- interrupts : property with a value describing the interrupt + number + +Optional properties: +- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the + instance number + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Example: + +Step1: SoC common .dtsi file + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +(or) + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +Step 2: board specific .dts file + + &dcan1 { + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt new file mode 100644 index 00000000000..dcaabe9fe86 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -0,0 +1,109 @@ +TI SoC Ethernet Switch Controller Device Tree Bindings +------------------------------------------------------ + +Required properties: +- compatible : Should be "ti,cpsw" +- reg : physical base address and size of the cpsw + registers map +- interrupts : property with a value describing the interrupt + number +- interrupt-parent : The parent interrupt controller +- cpdma_channels : Specifies number of channels in CPDMA +- host_port_no : Specifies host port shift +- cpdma_reg_ofs : Specifies CPDMA submodule register offset +- cpdma_sram_ofs : Specifies CPDMA SRAM offset +- ale_reg_ofs : Specifies ALE submodule register offset +- ale_entries : Specifies No of entries ALE can hold +- host_port_reg_ofs : Specifies host port register offset +- hw_stats_reg_ofs : Specifies hardware statistics register offset +- bd_ram_ofs : Specifies internal desciptor RAM offset +- bd_ram_size : Specifies internal descriptor RAM size +- rx_descs : Specifies number of Rx descriptors +- mac_control : Specifies Default MAC control register content + for the specific platform +- slaves : Specifies number for slaves +- slave_reg_ofs : Specifies slave register offset +- sliver_reg_ofs : Specifies slave sliver register offset +- phy_id : Specifies slave phy id +- mac-address : Specifies slave MAC address + +Optional properties: +- ti,hwmods : Must be "cpgmac0" +- no_bd_ram : Must be 0 or 1 + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples: + + mac: ethernet@4A100000 { + compatible = "ti,cpsw"; + reg = <0x4A100000 0x1000>; + interrupts = <55 0x4>; + interrupt-parent = <&intc>; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + +(or) + mac: ethernet@4A100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt new file mode 100644 index 00000000000..72efaaf764f --- /dev/null +++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt @@ -0,0 +1,33 @@ +TI SoC Davinci MDIO Controller Device Tree Bindings +--------------------------------------------------- + +Required properties: +- compatible : Should be "ti,davinci_mdio" +- reg : physical base address and size of the davinci mdio + registers map +- bus_freq : Mdio Bus frequency + +Optional properties: +- ti,hwmods : Must be "davinci_mdio" + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples: + + mdio: davinci_mdio@4A101000 { + compatible = "ti,cpsw"; + reg = <0x4A101000 0x1000>; + bus_freq = <1000000>; + }; + +(or) + + mdio: davinci_mdio@4A101000 { + compatible = "ti,cpsw"; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt new file mode 100644 index 00000000000..8516929c725 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt @@ -0,0 +1,75 @@ +Properties for an MDIO bus multiplexer controlled by a memory-mapped device + +This is a special case of a MDIO bus multiplexer. A memory-mapped device, +like an FPGA, is used to control which child bus is connected. The mdio-mux +node must be a child of the memory-mapped device. The driver currently only +supports devices with eight-bit registers. + +Required properties in addition to the generic multiplexer properties: + +- compatible : string, must contain "mdio-mux-mmioreg" + +- reg : integer, contains the offset of the register that controls the bus + multiplexer. The size field in the 'reg' property is the size of + register, and must therefore be 1. + +- mux-mask : integer, contains an eight-bit mask that specifies which + bits in the register control the actual bus multiplexer. The + 'reg' property of each child mdio-mux node must be constrained by + this mask. + +Example: + +The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. +For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. +A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on +BRDCFG1 that control the actual mux. + + /* The FPGA node */ + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi2 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x6>; // EMI2 + + emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; + }; + + /* The parent MDIO bus. */ + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <100 1 0 0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt new file mode 100644 index 00000000000..8edc20e1b09 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt @@ -0,0 +1,74 @@ +Broadcom BCM2835 GPIO (and pinmux) controller + +The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt +controller, and pinmux/control device. + +Required properties: +- compatible: "brcm,bcm2835-gpio" +- reg: Should contain the physical address of the GPIO module's registes. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- interrupts : The interrupt outputs from the controller. One interrupt per + individual bank followed by the "all banks" interrupt. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + +Please refer to ../gpio/gpio.txt for a general description of GPIO bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Each pin configuration node lists the pin(s) to which it applies, and one or +more of the mux function to select on those pin(s), and pull-up/down +configuration. Each subnode only affects those parameters that are explicitly +listed. In other words, a subnode that lists only a mux function implies no +information about any pull configuration. Similarly, a subnode that lists only +a pul parameter implies no information about the mux function. + +Required subnode-properties: +- brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs + are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53. + +Optional subnode-properties: +- brcm,function: Integer, containing the function to mux to the pin(s): + 0: GPIO in + 1: GPIO out + 2: alt5 + 3: alt4 + 4: alt0 + 5: alt1 + 6: alt2 + 7: alt3 +- brcm,pull: Integer, representing the pull-down/up to apply to the pin(s): + 0: none + 1: down + 2: up + +Each of brcm,function and brcm,pull may contain either a single value which +will be applied to all pins in brcm,pins, or 1 value for each entry in +brcm,pins. + +Example: + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x2200000 0xb4>; + interrupts = <2 17>, <2 19>, <2 18>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt new file mode 100644 index 00000000000..1183f1a3be3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt @@ -0,0 +1,984 @@ +* Freescale IMX35 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx35-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx35 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +See below for available PIN_FUNC_ID for imx35: +0 MX35_PAD_CAPTURE__GPT_CAPIN1 +1 MX35_PAD_CAPTURE__GPT_CMPOUT2 +2 MX35_PAD_CAPTURE__CSPI2_SS1 +3 MX35_PAD_CAPTURE__EPIT1_EPITO +4 MX35_PAD_CAPTURE__CCM_CLK32K +5 MX35_PAD_CAPTURE__GPIO1_4 +6 MX35_PAD_COMPARE__GPT_CMPOUT1 +7 MX35_PAD_COMPARE__GPT_CAPIN2 +8 MX35_PAD_COMPARE__GPT_CMPOUT3 +9 MX35_PAD_COMPARE__EPIT2_EPITO +10 MX35_PAD_COMPARE__GPIO1_5 +11 MX35_PAD_COMPARE__SDMA_EXTDMA_2 +12 MX35_PAD_WDOG_RST__WDOG_WDOG_B +13 MX35_PAD_WDOG_RST__IPU_FLASH_STROBE +14 MX35_PAD_WDOG_RST__GPIO1_6 +15 MX35_PAD_GPIO1_0__GPIO1_0 +16 MX35_PAD_GPIO1_0__CCM_PMIC_RDY +17 MX35_PAD_GPIO1_0__OWIRE_LINE +18 MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 +19 MX35_PAD_GPIO1_1__GPIO1_1 +20 MX35_PAD_GPIO1_1__PWM_PWMO +21 MX35_PAD_GPIO1_1__CSPI1_SS2 +22 MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT +23 MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 +24 MX35_PAD_GPIO2_0__GPIO2_0 +25 MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK +26 MX35_PAD_GPIO3_0__GPIO3_0 +27 MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK +28 MX35_PAD_RESET_IN_B__CCM_RESET_IN_B +29 MX35_PAD_POR_B__CCM_POR_B +30 MX35_PAD_CLKO__CCM_CLKO +31 MX35_PAD_CLKO__GPIO1_8 +32 MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 +33 MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 +34 MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 +35 MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 +36 MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 +37 MX35_PAD_VSTBY__CCM_VSTBY +38 MX35_PAD_VSTBY__GPIO1_7 +39 MX35_PAD_A0__EMI_EIM_DA_L_0 +40 MX35_PAD_A1__EMI_EIM_DA_L_1 +41 MX35_PAD_A2__EMI_EIM_DA_L_2 +42 MX35_PAD_A3__EMI_EIM_DA_L_3 +43 MX35_PAD_A4__EMI_EIM_DA_L_4 +44 MX35_PAD_A5__EMI_EIM_DA_L_5 +45 MX35_PAD_A6__EMI_EIM_DA_L_6 +46 MX35_PAD_A7__EMI_EIM_DA_L_7 +47 MX35_PAD_A8__EMI_EIM_DA_H_8 +48 MX35_PAD_A9__EMI_EIM_DA_H_9 +49 MX35_PAD_A10__EMI_EIM_DA_H_10 +50 MX35_PAD_MA10__EMI_MA10 +51 MX35_PAD_A11__EMI_EIM_DA_H_11 +52 MX35_PAD_A12__EMI_EIM_DA_H_12 +53 MX35_PAD_A13__EMI_EIM_DA_H_13 +54 MX35_PAD_A14__EMI_EIM_DA_H2_14 +55 MX35_PAD_A15__EMI_EIM_DA_H2_15 +56 MX35_PAD_A16__EMI_EIM_A_16 +57 MX35_PAD_A17__EMI_EIM_A_17 +58 MX35_PAD_A18__EMI_EIM_A_18 +59 MX35_PAD_A19__EMI_EIM_A_19 +60 MX35_PAD_A20__EMI_EIM_A_20 +61 MX35_PAD_A21__EMI_EIM_A_21 +62 MX35_PAD_A22__EMI_EIM_A_22 +63 MX35_PAD_A23__EMI_EIM_A_23 +64 MX35_PAD_A24__EMI_EIM_A_24 +65 MX35_PAD_A25__EMI_EIM_A_25 +66 MX35_PAD_SDBA1__EMI_EIM_SDBA1 +67 MX35_PAD_SDBA0__EMI_EIM_SDBA0 +68 MX35_PAD_SD0__EMI_DRAM_D_0 +69 MX35_PAD_SD1__EMI_DRAM_D_1 +70 MX35_PAD_SD2__EMI_DRAM_D_2 +71 MX35_PAD_SD3__EMI_DRAM_D_3 +72 MX35_PAD_SD4__EMI_DRAM_D_4 +73 MX35_PAD_SD5__EMI_DRAM_D_5 +74 MX35_PAD_SD6__EMI_DRAM_D_6 +75 MX35_PAD_SD7__EMI_DRAM_D_7 +76 MX35_PAD_SD8__EMI_DRAM_D_8 +77 MX35_PAD_SD9__EMI_DRAM_D_9 +78 MX35_PAD_SD10__EMI_DRAM_D_10 +79 MX35_PAD_SD11__EMI_DRAM_D_11 +80 MX35_PAD_SD12__EMI_DRAM_D_12 +81 MX35_PAD_SD13__EMI_DRAM_D_13 +82 MX35_PAD_SD14__EMI_DRAM_D_14 +83 MX35_PAD_SD15__EMI_DRAM_D_15 +84 MX35_PAD_SD16__EMI_DRAM_D_16 +85 MX35_PAD_SD17__EMI_DRAM_D_17 +86 MX35_PAD_SD18__EMI_DRAM_D_18 +87 MX35_PAD_SD19__EMI_DRAM_D_19 +88 MX35_PAD_SD20__EMI_DRAM_D_20 +89 MX35_PAD_SD21__EMI_DRAM_D_21 +90 MX35_PAD_SD22__EMI_DRAM_D_22 +91 MX35_PAD_SD23__EMI_DRAM_D_23 +92 MX35_PAD_SD24__EMI_DRAM_D_24 +93 MX35_PAD_SD25__EMI_DRAM_D_25 +94 MX35_PAD_SD26__EMI_DRAM_D_26 +95 MX35_PAD_SD27__EMI_DRAM_D_27 +96 MX35_PAD_SD28__EMI_DRAM_D_28 +97 MX35_PAD_SD29__EMI_DRAM_D_29 +98 MX35_PAD_SD30__EMI_DRAM_D_30 +99 MX35_PAD_SD31__EMI_DRAM_D_31 +100 MX35_PAD_DQM0__EMI_DRAM_DQM_0 +101 MX35_PAD_DQM1__EMI_DRAM_DQM_1 +102 MX35_PAD_DQM2__EMI_DRAM_DQM_2 +103 MX35_PAD_DQM3__EMI_DRAM_DQM_3 +104 MX35_PAD_EB0__EMI_EIM_EB0_B +105 MX35_PAD_EB1__EMI_EIM_EB1_B +106 MX35_PAD_OE__EMI_EIM_OE +107 MX35_PAD_CS0__EMI_EIM_CS0 +108 MX35_PAD_CS1__EMI_EIM_CS1 +109 MX35_PAD_CS1__EMI_NANDF_CE3 +110 MX35_PAD_CS2__EMI_EIM_CS2 +111 MX35_PAD_CS3__EMI_EIM_CS3 +112 MX35_PAD_CS4__EMI_EIM_CS4 +113 MX35_PAD_CS4__EMI_DTACK_B +114 MX35_PAD_CS4__EMI_NANDF_CE1 +115 MX35_PAD_CS4__GPIO1_20 +116 MX35_PAD_CS5__EMI_EIM_CS5 +117 MX35_PAD_CS5__CSPI2_SS2 +118 MX35_PAD_CS5__CSPI1_SS2 +119 MX35_PAD_CS5__EMI_NANDF_CE2 +120 MX35_PAD_CS5__GPIO1_21 +121 MX35_PAD_NF_CE0__EMI_NANDF_CE0 +122 MX35_PAD_NF_CE0__GPIO1_22 +123 MX35_PAD_ECB__EMI_EIM_ECB +124 MX35_PAD_LBA__EMI_EIM_LBA +125 MX35_PAD_BCLK__EMI_EIM_BCLK +126 MX35_PAD_RW__EMI_EIM_RW +127 MX35_PAD_RAS__EMI_DRAM_RAS +128 MX35_PAD_CAS__EMI_DRAM_CAS +129 MX35_PAD_SDWE__EMI_DRAM_SDWE +130 MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 +131 MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 +132 MX35_PAD_SDCLK__EMI_DRAM_SDCLK +133 MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 +134 MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 +135 MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 +136 MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 +137 MX35_PAD_NFWE_B__EMI_NANDF_WE_B +138 MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 +139 MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC +140 MX35_PAD_NFWE_B__GPIO2_18 +141 MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 +142 MX35_PAD_NFRE_B__EMI_NANDF_RE_B +143 MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR +144 MX35_PAD_NFRE_B__IPU_DISPB_BCLK +145 MX35_PAD_NFRE_B__GPIO2_19 +146 MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 +147 MX35_PAD_NFALE__EMI_NANDF_ALE +148 MX35_PAD_NFALE__USB_TOP_USBH2_STP +149 MX35_PAD_NFALE__IPU_DISPB_CS0 +150 MX35_PAD_NFALE__GPIO2_20 +151 MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 +152 MX35_PAD_NFCLE__EMI_NANDF_CLE +153 MX35_PAD_NFCLE__USB_TOP_USBH2_NXT +154 MX35_PAD_NFCLE__IPU_DISPB_PAR_RS +155 MX35_PAD_NFCLE__GPIO2_21 +156 MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 +157 MX35_PAD_NFWP_B__EMI_NANDF_WP_B +158 MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 +159 MX35_PAD_NFWP_B__IPU_DISPB_WR +160 MX35_PAD_NFWP_B__GPIO2_22 +161 MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL +162 MX35_PAD_NFRB__EMI_NANDF_RB +163 MX35_PAD_NFRB__IPU_DISPB_RD +164 MX35_PAD_NFRB__GPIO2_23 +165 MX35_PAD_NFRB__ARM11P_TOP_TRCLK +166 MX35_PAD_D15__EMI_EIM_D_15 +167 MX35_PAD_D14__EMI_EIM_D_14 +168 MX35_PAD_D13__EMI_EIM_D_13 +169 MX35_PAD_D12__EMI_EIM_D_12 +170 MX35_PAD_D11__EMI_EIM_D_11 +171 MX35_PAD_D10__EMI_EIM_D_10 +172 MX35_PAD_D9__EMI_EIM_D_9 +173 MX35_PAD_D8__EMI_EIM_D_8 +174 MX35_PAD_D7__EMI_EIM_D_7 +175 MX35_PAD_D6__EMI_EIM_D_6 +176 MX35_PAD_D5__EMI_EIM_D_5 +177 MX35_PAD_D4__EMI_EIM_D_4 +178 MX35_PAD_D3__EMI_EIM_D_3 +179 MX35_PAD_D2__EMI_EIM_D_2 +180 MX35_PAD_D1__EMI_EIM_D_1 +181 MX35_PAD_D0__EMI_EIM_D_0 +182 MX35_PAD_CSI_D8__IPU_CSI_D_8 +183 MX35_PAD_CSI_D8__KPP_COL_0 +184 MX35_PAD_CSI_D8__GPIO1_20 +185 MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 +186 MX35_PAD_CSI_D9__IPU_CSI_D_9 +187 MX35_PAD_CSI_D9__KPP_COL_1 +188 MX35_PAD_CSI_D9__GPIO1_21 +189 MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 +190 MX35_PAD_CSI_D10__IPU_CSI_D_10 +191 MX35_PAD_CSI_D10__KPP_COL_2 +192 MX35_PAD_CSI_D10__GPIO1_22 +193 MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 +194 MX35_PAD_CSI_D11__IPU_CSI_D_11 +195 MX35_PAD_CSI_D11__KPP_COL_3 +196 MX35_PAD_CSI_D11__GPIO1_23 +197 MX35_PAD_CSI_D12__IPU_CSI_D_12 +198 MX35_PAD_CSI_D12__KPP_ROW_0 +199 MX35_PAD_CSI_D12__GPIO1_24 +200 MX35_PAD_CSI_D13__IPU_CSI_D_13 +201 MX35_PAD_CSI_D13__KPP_ROW_1 +202 MX35_PAD_CSI_D13__GPIO1_25 +203 MX35_PAD_CSI_D14__IPU_CSI_D_14 +204 MX35_PAD_CSI_D14__KPP_ROW_2 +205 MX35_PAD_CSI_D14__GPIO1_26 +206 MX35_PAD_CSI_D15__IPU_CSI_D_15 +207 MX35_PAD_CSI_D15__KPP_ROW_3 +208 MX35_PAD_CSI_D15__GPIO1_27 +209 MX35_PAD_CSI_MCLK__IPU_CSI_MCLK +210 MX35_PAD_CSI_MCLK__GPIO1_28 +211 MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC +212 MX35_PAD_CSI_VSYNC__GPIO1_29 +213 MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC +214 MX35_PAD_CSI_HSYNC__GPIO1_30 +215 MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK +216 MX35_PAD_CSI_PIXCLK__GPIO1_31 +217 MX35_PAD_I2C1_CLK__I2C1_SCL +218 MX35_PAD_I2C1_CLK__GPIO2_24 +219 MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK +220 MX35_PAD_I2C1_DAT__I2C1_SDA +221 MX35_PAD_I2C1_DAT__GPIO2_25 +222 MX35_PAD_I2C2_CLK__I2C2_SCL +223 MX35_PAD_I2C2_CLK__CAN1_TXCAN +224 MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR +225 MX35_PAD_I2C2_CLK__GPIO2_26 +226 MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 +227 MX35_PAD_I2C2_DAT__I2C2_SDA +228 MX35_PAD_I2C2_DAT__CAN1_RXCAN +229 MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC +230 MX35_PAD_I2C2_DAT__GPIO2_27 +231 MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 +232 MX35_PAD_STXD4__AUDMUX_AUD4_TXD +233 MX35_PAD_STXD4__GPIO2_28 +234 MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 +235 MX35_PAD_SRXD4__AUDMUX_AUD4_RXD +236 MX35_PAD_SRXD4__GPIO2_29 +237 MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 +238 MX35_PAD_SCK4__AUDMUX_AUD4_TXC +239 MX35_PAD_SCK4__GPIO2_30 +240 MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 +241 MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS +242 MX35_PAD_STXFS4__GPIO2_31 +243 MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 +244 MX35_PAD_STXD5__AUDMUX_AUD5_TXD +245 MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 +246 MX35_PAD_STXD5__CSPI2_MOSI +247 MX35_PAD_STXD5__GPIO1_0 +248 MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 +249 MX35_PAD_SRXD5__AUDMUX_AUD5_RXD +250 MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 +251 MX35_PAD_SRXD5__CSPI2_MISO +252 MX35_PAD_SRXD5__GPIO1_1 +253 MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 +254 MX35_PAD_SCK5__AUDMUX_AUD5_TXC +255 MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK +256 MX35_PAD_SCK5__CSPI2_SCLK +257 MX35_PAD_SCK5__GPIO1_2 +258 MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 +259 MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS +260 MX35_PAD_STXFS5__CSPI2_RDY +261 MX35_PAD_STXFS5__GPIO1_3 +262 MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 +263 MX35_PAD_SCKR__ESAI_SCKR +264 MX35_PAD_SCKR__GPIO1_4 +265 MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 +266 MX35_PAD_FSR__ESAI_FSR +267 MX35_PAD_FSR__GPIO1_5 +268 MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 +269 MX35_PAD_HCKR__ESAI_HCKR +270 MX35_PAD_HCKR__AUDMUX_AUD5_RXFS +271 MX35_PAD_HCKR__CSPI2_SS0 +272 MX35_PAD_HCKR__IPU_FLASH_STROBE +273 MX35_PAD_HCKR__GPIO1_6 +274 MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 +275 MX35_PAD_SCKT__ESAI_SCKT +276 MX35_PAD_SCKT__GPIO1_7 +277 MX35_PAD_SCKT__IPU_CSI_D_0 +278 MX35_PAD_SCKT__KPP_ROW_2 +279 MX35_PAD_FST__ESAI_FST +280 MX35_PAD_FST__GPIO1_8 +281 MX35_PAD_FST__IPU_CSI_D_1 +282 MX35_PAD_FST__KPP_ROW_3 +283 MX35_PAD_HCKT__ESAI_HCKT +284 MX35_PAD_HCKT__AUDMUX_AUD5_RXC +285 MX35_PAD_HCKT__GPIO1_9 +286 MX35_PAD_HCKT__IPU_CSI_D_2 +287 MX35_PAD_HCKT__KPP_COL_3 +288 MX35_PAD_TX5_RX0__ESAI_TX5_RX0 +289 MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC +290 MX35_PAD_TX5_RX0__CSPI2_SS2 +291 MX35_PAD_TX5_RX0__CAN2_TXCAN +292 MX35_PAD_TX5_RX0__UART2_DTR +293 MX35_PAD_TX5_RX0__GPIO1_10 +294 MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 +295 MX35_PAD_TX4_RX1__ESAI_TX4_RX1 +296 MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS +297 MX35_PAD_TX4_RX1__CSPI2_SS3 +298 MX35_PAD_TX4_RX1__CAN2_RXCAN +299 MX35_PAD_TX4_RX1__UART2_DSR +300 MX35_PAD_TX4_RX1__GPIO1_11 +301 MX35_PAD_TX4_RX1__IPU_CSI_D_3 +302 MX35_PAD_TX4_RX1__KPP_ROW_0 +303 MX35_PAD_TX3_RX2__ESAI_TX3_RX2 +304 MX35_PAD_TX3_RX2__I2C3_SCL +305 MX35_PAD_TX3_RX2__EMI_NANDF_CE1 +306 MX35_PAD_TX3_RX2__GPIO1_12 +307 MX35_PAD_TX3_RX2__IPU_CSI_D_4 +308 MX35_PAD_TX3_RX2__KPP_ROW_1 +309 MX35_PAD_TX2_RX3__ESAI_TX2_RX3 +310 MX35_PAD_TX2_RX3__I2C3_SDA +311 MX35_PAD_TX2_RX3__EMI_NANDF_CE2 +312 MX35_PAD_TX2_RX3__GPIO1_13 +313 MX35_PAD_TX2_RX3__IPU_CSI_D_5 +314 MX35_PAD_TX2_RX3__KPP_COL_0 +315 MX35_PAD_TX1__ESAI_TX1 +316 MX35_PAD_TX1__CCM_PMIC_RDY +317 MX35_PAD_TX1__CSPI1_SS2 +318 MX35_PAD_TX1__EMI_NANDF_CE3 +319 MX35_PAD_TX1__UART2_RI +320 MX35_PAD_TX1__GPIO1_14 +321 MX35_PAD_TX1__IPU_CSI_D_6 +322 MX35_PAD_TX1__KPP_COL_1 +323 MX35_PAD_TX0__ESAI_TX0 +324 MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK +325 MX35_PAD_TX0__CSPI1_SS3 +326 MX35_PAD_TX0__EMI_DTACK_B +327 MX35_PAD_TX0__UART2_DCD +328 MX35_PAD_TX0__GPIO1_15 +329 MX35_PAD_TX0__IPU_CSI_D_7 +330 MX35_PAD_TX0__KPP_COL_2 +331 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI +332 MX35_PAD_CSPI1_MOSI__GPIO1_16 +333 MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 +334 MX35_PAD_CSPI1_MISO__CSPI1_MISO +335 MX35_PAD_CSPI1_MISO__GPIO1_17 +336 MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 +337 MX35_PAD_CSPI1_SS0__CSPI1_SS0 +338 MX35_PAD_CSPI1_SS0__OWIRE_LINE +339 MX35_PAD_CSPI1_SS0__CSPI2_SS3 +340 MX35_PAD_CSPI1_SS0__GPIO1_18 +341 MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 +342 MX35_PAD_CSPI1_SS1__CSPI1_SS1 +343 MX35_PAD_CSPI1_SS1__PWM_PWMO +344 MX35_PAD_CSPI1_SS1__CCM_CLK32K +345 MX35_PAD_CSPI1_SS1__GPIO1_19 +346 MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 +347 MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 +348 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK +349 MX35_PAD_CSPI1_SCLK__GPIO3_4 +350 MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 +351 MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 +352 MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY +353 MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 +354 MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 +355 MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 +356 MX35_PAD_RXD1__UART1_RXD_MUX +357 MX35_PAD_RXD1__CSPI2_MOSI +358 MX35_PAD_RXD1__KPP_COL_4 +359 MX35_PAD_RXD1__GPIO3_6 +360 MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 +361 MX35_PAD_TXD1__UART1_TXD_MUX +362 MX35_PAD_TXD1__CSPI2_MISO +363 MX35_PAD_TXD1__KPP_COL_5 +364 MX35_PAD_TXD1__GPIO3_7 +365 MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 +366 MX35_PAD_RTS1__UART1_RTS +367 MX35_PAD_RTS1__CSPI2_SCLK +368 MX35_PAD_RTS1__I2C3_SCL +369 MX35_PAD_RTS1__IPU_CSI_D_0 +370 MX35_PAD_RTS1__KPP_COL_6 +371 MX35_PAD_RTS1__GPIO3_8 +372 MX35_PAD_RTS1__EMI_NANDF_CE1 +373 MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 +374 MX35_PAD_CTS1__UART1_CTS +375 MX35_PAD_CTS1__CSPI2_RDY +376 MX35_PAD_CTS1__I2C3_SDA +377 MX35_PAD_CTS1__IPU_CSI_D_1 +378 MX35_PAD_CTS1__KPP_COL_7 +379 MX35_PAD_CTS1__GPIO3_9 +380 MX35_PAD_CTS1__EMI_NANDF_CE2 +381 MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 +382 MX35_PAD_RXD2__UART2_RXD_MUX +383 MX35_PAD_RXD2__KPP_ROW_4 +384 MX35_PAD_RXD2__GPIO3_10 +385 MX35_PAD_TXD2__UART2_TXD_MUX +386 MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK +387 MX35_PAD_TXD2__KPP_ROW_5 +388 MX35_PAD_TXD2__GPIO3_11 +389 MX35_PAD_RTS2__UART2_RTS +390 MX35_PAD_RTS2__SPDIF_SPDIF_IN1 +391 MX35_PAD_RTS2__CAN2_RXCAN +392 MX35_PAD_RTS2__IPU_CSI_D_2 +393 MX35_PAD_RTS2__KPP_ROW_6 +394 MX35_PAD_RTS2__GPIO3_12 +395 MX35_PAD_RTS2__AUDMUX_AUD5_RXC +396 MX35_PAD_RTS2__UART3_RXD_MUX +397 MX35_PAD_CTS2__UART2_CTS +398 MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 +399 MX35_PAD_CTS2__CAN2_TXCAN +400 MX35_PAD_CTS2__IPU_CSI_D_3 +401 MX35_PAD_CTS2__KPP_ROW_7 +402 MX35_PAD_CTS2__GPIO3_13 +403 MX35_PAD_CTS2__AUDMUX_AUD5_RXFS +404 MX35_PAD_CTS2__UART3_TXD_MUX +405 MX35_PAD_RTCK__ARM11P_TOP_RTCK +406 MX35_PAD_TCK__SJC_TCK +407 MX35_PAD_TMS__SJC_TMS +408 MX35_PAD_TDI__SJC_TDI +409 MX35_PAD_TDO__SJC_TDO +410 MX35_PAD_TRSTB__SJC_TRSTB +411 MX35_PAD_DE_B__SJC_DE_B +412 MX35_PAD_SJC_MOD__SJC_MOD +413 MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR +414 MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR +415 MX35_PAD_USBOTG_PWR__GPIO3_14 +416 MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC +417 MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC +418 MX35_PAD_USBOTG_OC__GPIO3_15 +419 MX35_PAD_LD0__IPU_DISPB_DAT_0 +420 MX35_PAD_LD0__GPIO2_0 +421 MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 +422 MX35_PAD_LD1__IPU_DISPB_DAT_1 +423 MX35_PAD_LD1__GPIO2_1 +424 MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 +425 MX35_PAD_LD2__IPU_DISPB_DAT_2 +426 MX35_PAD_LD2__GPIO2_2 +427 MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 +428 MX35_PAD_LD3__IPU_DISPB_DAT_3 +429 MX35_PAD_LD3__GPIO2_3 +430 MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 +431 MX35_PAD_LD4__IPU_DISPB_DAT_4 +432 MX35_PAD_LD4__GPIO2_4 +433 MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 +434 MX35_PAD_LD5__IPU_DISPB_DAT_5 +435 MX35_PAD_LD5__GPIO2_5 +436 MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 +437 MX35_PAD_LD6__IPU_DISPB_DAT_6 +438 MX35_PAD_LD6__GPIO2_6 +439 MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 +440 MX35_PAD_LD7__IPU_DISPB_DAT_7 +441 MX35_PAD_LD7__GPIO2_7 +442 MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 +443 MX35_PAD_LD8__IPU_DISPB_DAT_8 +444 MX35_PAD_LD8__GPIO2_8 +445 MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 +446 MX35_PAD_LD9__IPU_DISPB_DAT_9 +447 MX35_PAD_LD9__GPIO2_9 +448 MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 +449 MX35_PAD_LD10__IPU_DISPB_DAT_10 +450 MX35_PAD_LD10__GPIO2_10 +451 MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 +452 MX35_PAD_LD11__IPU_DISPB_DAT_11 +453 MX35_PAD_LD11__GPIO2_11 +454 MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 +455 MX35_PAD_LD11__ARM11P_TOP_TRACE_4 +456 MX35_PAD_LD12__IPU_DISPB_DAT_12 +457 MX35_PAD_LD12__GPIO2_12 +458 MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 +459 MX35_PAD_LD12__ARM11P_TOP_TRACE_5 +460 MX35_PAD_LD13__IPU_DISPB_DAT_13 +461 MX35_PAD_LD13__GPIO2_13 +462 MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 +463 MX35_PAD_LD13__ARM11P_TOP_TRACE_6 +464 MX35_PAD_LD14__IPU_DISPB_DAT_14 +465 MX35_PAD_LD14__GPIO2_14 +466 MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 +467 MX35_PAD_LD14__ARM11P_TOP_TRACE_7 +468 MX35_PAD_LD15__IPU_DISPB_DAT_15 +469 MX35_PAD_LD15__GPIO2_15 +470 MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 +471 MX35_PAD_LD15__ARM11P_TOP_TRACE_8 +472 MX35_PAD_LD16__IPU_DISPB_DAT_16 +473 MX35_PAD_LD16__IPU_DISPB_D12_VSYNC +474 MX35_PAD_LD16__GPIO2_16 +475 MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 +476 MX35_PAD_LD16__ARM11P_TOP_TRACE_9 +477 MX35_PAD_LD17__IPU_DISPB_DAT_17 +478 MX35_PAD_LD17__IPU_DISPB_CS2 +479 MX35_PAD_LD17__GPIO2_17 +480 MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 +481 MX35_PAD_LD17__ARM11P_TOP_TRACE_10 +482 MX35_PAD_LD18__IPU_DISPB_DAT_18 +483 MX35_PAD_LD18__IPU_DISPB_D0_VSYNC +484 MX35_PAD_LD18__IPU_DISPB_D12_VSYNC +485 MX35_PAD_LD18__ESDHC3_CMD +486 MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 +487 MX35_PAD_LD18__GPIO3_24 +488 MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 +489 MX35_PAD_LD18__ARM11P_TOP_TRACE_11 +490 MX35_PAD_LD19__IPU_DISPB_DAT_19 +491 MX35_PAD_LD19__IPU_DISPB_BCLK +492 MX35_PAD_LD19__IPU_DISPB_CS1 +493 MX35_PAD_LD19__ESDHC3_CLK +494 MX35_PAD_LD19__USB_TOP_USBOTG_DIR +495 MX35_PAD_LD19__GPIO3_25 +496 MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 +497 MX35_PAD_LD19__ARM11P_TOP_TRACE_12 +498 MX35_PAD_LD20__IPU_DISPB_DAT_20 +499 MX35_PAD_LD20__IPU_DISPB_CS0 +500 MX35_PAD_LD20__IPU_DISPB_SD_CLK +501 MX35_PAD_LD20__ESDHC3_DAT0 +502 MX35_PAD_LD20__GPIO3_26 +503 MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 +504 MX35_PAD_LD20__ARM11P_TOP_TRACE_13 +505 MX35_PAD_LD21__IPU_DISPB_DAT_21 +506 MX35_PAD_LD21__IPU_DISPB_PAR_RS +507 MX35_PAD_LD21__IPU_DISPB_SER_RS +508 MX35_PAD_LD21__ESDHC3_DAT1 +509 MX35_PAD_LD21__USB_TOP_USBOTG_STP +510 MX35_PAD_LD21__GPIO3_27 +511 MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL +512 MX35_PAD_LD21__ARM11P_TOP_TRACE_14 +513 MX35_PAD_LD22__IPU_DISPB_DAT_22 +514 MX35_PAD_LD22__IPU_DISPB_WR +515 MX35_PAD_LD22__IPU_DISPB_SD_D_I +516 MX35_PAD_LD22__ESDHC3_DAT2 +517 MX35_PAD_LD22__USB_TOP_USBOTG_NXT +518 MX35_PAD_LD22__GPIO3_28 +519 MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR +520 MX35_PAD_LD22__ARM11P_TOP_TRCTL +521 MX35_PAD_LD23__IPU_DISPB_DAT_23 +522 MX35_PAD_LD23__IPU_DISPB_RD +523 MX35_PAD_LD23__IPU_DISPB_SD_D_IO +524 MX35_PAD_LD23__ESDHC3_DAT3 +525 MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 +526 MX35_PAD_LD23__GPIO3_29 +527 MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS +528 MX35_PAD_LD23__ARM11P_TOP_TRCLK +529 MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC +530 MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO +531 MX35_PAD_D3_HSYNC__GPIO3_30 +532 MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE +533 MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 +534 MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK +535 MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK +536 MX35_PAD_D3_FPSHIFT__GPIO3_31 +537 MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 +538 MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 +539 MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY +540 MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O +541 MX35_PAD_D3_DRDY__GPIO1_0 +542 MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 +543 MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 +544 MX35_PAD_CONTRAST__IPU_DISPB_CONTR +545 MX35_PAD_CONTRAST__GPIO1_1 +546 MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 +547 MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 +548 MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC +549 MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 +550 MX35_PAD_D3_VSYNC__GPIO1_2 +551 MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD +552 MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 +553 MX35_PAD_D3_REV__IPU_DISPB_D3_REV +554 MX35_PAD_D3_REV__IPU_DISPB_SER_RS +555 MX35_PAD_D3_REV__GPIO1_3 +556 MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB +557 MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 +558 MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS +559 MX35_PAD_D3_CLS__IPU_DISPB_CS2 +560 MX35_PAD_D3_CLS__GPIO1_4 +561 MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 +562 MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 +563 MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +564 MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC +565 MX35_PAD_D3_SPL__GPIO1_5 +566 MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 +567 MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 +568 MX35_PAD_SD1_CMD__ESDHC1_CMD +569 MX35_PAD_SD1_CMD__MSHC_SCLK +570 MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC +571 MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 +572 MX35_PAD_SD1_CMD__GPIO1_6 +573 MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL +574 MX35_PAD_SD1_CLK__ESDHC1_CLK +575 MX35_PAD_SD1_CLK__MSHC_BS +576 MX35_PAD_SD1_CLK__IPU_DISPB_BCLK +577 MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 +578 MX35_PAD_SD1_CLK__GPIO1_7 +579 MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK +580 MX35_PAD_SD1_DATA0__ESDHC1_DAT0 +581 MX35_PAD_SD1_DATA0__MSHC_DATA_0 +582 MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 +583 MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 +584 MX35_PAD_SD1_DATA0__GPIO1_8 +585 MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 +586 MX35_PAD_SD1_DATA1__ESDHC1_DAT1 +587 MX35_PAD_SD1_DATA1__MSHC_DATA_1 +588 MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS +589 MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 +590 MX35_PAD_SD1_DATA1__GPIO1_9 +591 MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 +592 MX35_PAD_SD1_DATA2__ESDHC1_DAT2 +593 MX35_PAD_SD1_DATA2__MSHC_DATA_2 +594 MX35_PAD_SD1_DATA2__IPU_DISPB_WR +595 MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 +596 MX35_PAD_SD1_DATA2__GPIO1_10 +597 MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 +598 MX35_PAD_SD1_DATA3__ESDHC1_DAT3 +599 MX35_PAD_SD1_DATA3__MSHC_DATA_3 +600 MX35_PAD_SD1_DATA3__IPU_DISPB_RD +601 MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 +602 MX35_PAD_SD1_DATA3__GPIO1_11 +603 MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 +604 MX35_PAD_SD2_CMD__ESDHC2_CMD +605 MX35_PAD_SD2_CMD__I2C3_SCL +606 MX35_PAD_SD2_CMD__ESDHC1_DAT4 +607 MX35_PAD_SD2_CMD__IPU_CSI_D_2 +608 MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 +609 MX35_PAD_SD2_CMD__GPIO2_0 +610 MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 +611 MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC +612 MX35_PAD_SD2_CLK__ESDHC2_CLK +613 MX35_PAD_SD2_CLK__I2C3_SDA +614 MX35_PAD_SD2_CLK__ESDHC1_DAT5 +615 MX35_PAD_SD2_CLK__IPU_CSI_D_3 +616 MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 +617 MX35_PAD_SD2_CLK__GPIO2_1 +618 MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 +619 MX35_PAD_SD2_CLK__IPU_DISPB_CS2 +620 MX35_PAD_SD2_DATA0__ESDHC2_DAT0 +621 MX35_PAD_SD2_DATA0__UART3_RXD_MUX +622 MX35_PAD_SD2_DATA0__ESDHC1_DAT6 +623 MX35_PAD_SD2_DATA0__IPU_CSI_D_4 +624 MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 +625 MX35_PAD_SD2_DATA0__GPIO2_2 +626 MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK +627 MX35_PAD_SD2_DATA1__ESDHC2_DAT1 +628 MX35_PAD_SD2_DATA1__UART3_TXD_MUX +629 MX35_PAD_SD2_DATA1__ESDHC1_DAT7 +630 MX35_PAD_SD2_DATA1__IPU_CSI_D_5 +631 MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 +632 MX35_PAD_SD2_DATA1__GPIO2_3 +633 MX35_PAD_SD2_DATA2__ESDHC2_DAT2 +634 MX35_PAD_SD2_DATA2__UART3_RTS +635 MX35_PAD_SD2_DATA2__CAN1_RXCAN +636 MX35_PAD_SD2_DATA2__IPU_CSI_D_6 +637 MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 +638 MX35_PAD_SD2_DATA2__GPIO2_4 +639 MX35_PAD_SD2_DATA3__ESDHC2_DAT3 +640 MX35_PAD_SD2_DATA3__UART3_CTS +641 MX35_PAD_SD2_DATA3__CAN1_TXCAN +642 MX35_PAD_SD2_DATA3__IPU_CSI_D_7 +643 MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 +644 MX35_PAD_SD2_DATA3__GPIO2_5 +645 MX35_PAD_ATA_CS0__ATA_CS0 +646 MX35_PAD_ATA_CS0__CSPI1_SS3 +647 MX35_PAD_ATA_CS0__IPU_DISPB_CS1 +648 MX35_PAD_ATA_CS0__GPIO2_6 +649 MX35_PAD_ATA_CS0__IPU_DIAGB_0 +650 MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 +651 MX35_PAD_ATA_CS1__ATA_CS1 +652 MX35_PAD_ATA_CS1__IPU_DISPB_CS2 +653 MX35_PAD_ATA_CS1__CSPI2_SS0 +654 MX35_PAD_ATA_CS1__GPIO2_7 +655 MX35_PAD_ATA_CS1__IPU_DIAGB_1 +656 MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 +657 MX35_PAD_ATA_DIOR__ATA_DIOR +658 MX35_PAD_ATA_DIOR__ESDHC3_DAT0 +659 MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR +660 MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 +661 MX35_PAD_ATA_DIOR__CSPI2_SS1 +662 MX35_PAD_ATA_DIOR__GPIO2_8 +663 MX35_PAD_ATA_DIOR__IPU_DIAGB_2 +664 MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 +665 MX35_PAD_ATA_DIOW__ATA_DIOW +666 MX35_PAD_ATA_DIOW__ESDHC3_DAT1 +667 MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP +668 MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 +669 MX35_PAD_ATA_DIOW__CSPI2_MOSI +670 MX35_PAD_ATA_DIOW__GPIO2_9 +671 MX35_PAD_ATA_DIOW__IPU_DIAGB_3 +672 MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 +673 MX35_PAD_ATA_DMACK__ATA_DMACK +674 MX35_PAD_ATA_DMACK__ESDHC3_DAT2 +675 MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT +676 MX35_PAD_ATA_DMACK__CSPI2_MISO +677 MX35_PAD_ATA_DMACK__GPIO2_10 +678 MX35_PAD_ATA_DMACK__IPU_DIAGB_4 +679 MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 +680 MX35_PAD_ATA_RESET_B__ATA_RESET_B +681 MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 +682 MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 +683 MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O +684 MX35_PAD_ATA_RESET_B__CSPI2_RDY +685 MX35_PAD_ATA_RESET_B__GPIO2_11 +686 MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 +687 MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 +688 MX35_PAD_ATA_IORDY__ATA_IORDY +689 MX35_PAD_ATA_IORDY__ESDHC3_DAT4 +690 MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 +691 MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO +692 MX35_PAD_ATA_IORDY__ESDHC2_DAT4 +693 MX35_PAD_ATA_IORDY__GPIO2_12 +694 MX35_PAD_ATA_IORDY__IPU_DIAGB_6 +695 MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 +696 MX35_PAD_ATA_DATA0__ATA_DATA_0 +697 MX35_PAD_ATA_DATA0__ESDHC3_DAT5 +698 MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 +699 MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC +700 MX35_PAD_ATA_DATA0__ESDHC2_DAT5 +701 MX35_PAD_ATA_DATA0__GPIO2_13 +702 MX35_PAD_ATA_DATA0__IPU_DIAGB_7 +703 MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 +704 MX35_PAD_ATA_DATA1__ATA_DATA_1 +705 MX35_PAD_ATA_DATA1__ESDHC3_DAT6 +706 MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 +707 MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK +708 MX35_PAD_ATA_DATA1__ESDHC2_DAT6 +709 MX35_PAD_ATA_DATA1__GPIO2_14 +710 MX35_PAD_ATA_DATA1__IPU_DIAGB_8 +711 MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 +712 MX35_PAD_ATA_DATA2__ATA_DATA_2 +713 MX35_PAD_ATA_DATA2__ESDHC3_DAT7 +714 MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 +715 MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS +716 MX35_PAD_ATA_DATA2__ESDHC2_DAT7 +717 MX35_PAD_ATA_DATA2__GPIO2_15 +718 MX35_PAD_ATA_DATA2__IPU_DIAGB_9 +719 MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 +720 MX35_PAD_ATA_DATA3__ATA_DATA_3 +721 MX35_PAD_ATA_DATA3__ESDHC3_CLK +722 MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 +723 MX35_PAD_ATA_DATA3__CSPI2_SCLK +724 MX35_PAD_ATA_DATA3__GPIO2_16 +725 MX35_PAD_ATA_DATA3__IPU_DIAGB_10 +726 MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 +727 MX35_PAD_ATA_DATA4__ATA_DATA_4 +728 MX35_PAD_ATA_DATA4__ESDHC3_CMD +729 MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 +730 MX35_PAD_ATA_DATA4__GPIO2_17 +731 MX35_PAD_ATA_DATA4__IPU_DIAGB_11 +732 MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 +733 MX35_PAD_ATA_DATA5__ATA_DATA_5 +734 MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 +735 MX35_PAD_ATA_DATA5__GPIO2_18 +736 MX35_PAD_ATA_DATA5__IPU_DIAGB_12 +737 MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 +738 MX35_PAD_ATA_DATA6__ATA_DATA_6 +739 MX35_PAD_ATA_DATA6__CAN1_TXCAN +740 MX35_PAD_ATA_DATA6__UART1_DTR +741 MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD +742 MX35_PAD_ATA_DATA6__GPIO2_19 +743 MX35_PAD_ATA_DATA6__IPU_DIAGB_13 +744 MX35_PAD_ATA_DATA7__ATA_DATA_7 +745 MX35_PAD_ATA_DATA7__CAN1_RXCAN +746 MX35_PAD_ATA_DATA7__UART1_DSR +747 MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD +748 MX35_PAD_ATA_DATA7__GPIO2_20 +749 MX35_PAD_ATA_DATA7__IPU_DIAGB_14 +750 MX35_PAD_ATA_DATA8__ATA_DATA_8 +751 MX35_PAD_ATA_DATA8__UART3_RTS +752 MX35_PAD_ATA_DATA8__UART1_RI +753 MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC +754 MX35_PAD_ATA_DATA8__GPIO2_21 +755 MX35_PAD_ATA_DATA8__IPU_DIAGB_15 +756 MX35_PAD_ATA_DATA9__ATA_DATA_9 +757 MX35_PAD_ATA_DATA9__UART3_CTS +758 MX35_PAD_ATA_DATA9__UART1_DCD +759 MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS +760 MX35_PAD_ATA_DATA9__GPIO2_22 +761 MX35_PAD_ATA_DATA9__IPU_DIAGB_16 +762 MX35_PAD_ATA_DATA10__ATA_DATA_10 +763 MX35_PAD_ATA_DATA10__UART3_RXD_MUX +764 MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC +765 MX35_PAD_ATA_DATA10__GPIO2_23 +766 MX35_PAD_ATA_DATA10__IPU_DIAGB_17 +767 MX35_PAD_ATA_DATA11__ATA_DATA_11 +768 MX35_PAD_ATA_DATA11__UART3_TXD_MUX +769 MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS +770 MX35_PAD_ATA_DATA11__GPIO2_24 +771 MX35_PAD_ATA_DATA11__IPU_DIAGB_18 +772 MX35_PAD_ATA_DATA12__ATA_DATA_12 +773 MX35_PAD_ATA_DATA12__I2C3_SCL +774 MX35_PAD_ATA_DATA12__GPIO2_25 +775 MX35_PAD_ATA_DATA12__IPU_DIAGB_19 +776 MX35_PAD_ATA_DATA13__ATA_DATA_13 +777 MX35_PAD_ATA_DATA13__I2C3_SDA +778 MX35_PAD_ATA_DATA13__GPIO2_26 +779 MX35_PAD_ATA_DATA13__IPU_DIAGB_20 +780 MX35_PAD_ATA_DATA14__ATA_DATA_14 +781 MX35_PAD_ATA_DATA14__IPU_CSI_D_0 +782 MX35_PAD_ATA_DATA14__KPP_ROW_0 +783 MX35_PAD_ATA_DATA14__GPIO2_27 +784 MX35_PAD_ATA_DATA14__IPU_DIAGB_21 +785 MX35_PAD_ATA_DATA15__ATA_DATA_15 +786 MX35_PAD_ATA_DATA15__IPU_CSI_D_1 +787 MX35_PAD_ATA_DATA15__KPP_ROW_1 +788 MX35_PAD_ATA_DATA15__GPIO2_28 +789 MX35_PAD_ATA_DATA15__IPU_DIAGB_22 +790 MX35_PAD_ATA_INTRQ__ATA_INTRQ +791 MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 +792 MX35_PAD_ATA_INTRQ__KPP_ROW_2 +793 MX35_PAD_ATA_INTRQ__GPIO2_29 +794 MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 +795 MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN +796 MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 +797 MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 +798 MX35_PAD_ATA_BUFF_EN__GPIO2_30 +799 MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 +800 MX35_PAD_ATA_DMARQ__ATA_DMARQ +801 MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 +802 MX35_PAD_ATA_DMARQ__KPP_COL_0 +803 MX35_PAD_ATA_DMARQ__GPIO2_31 +804 MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 +805 MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 +806 MX35_PAD_ATA_DA0__ATA_DA_0 +807 MX35_PAD_ATA_DA0__IPU_CSI_D_5 +808 MX35_PAD_ATA_DA0__KPP_COL_1 +809 MX35_PAD_ATA_DA0__GPIO3_0 +810 MX35_PAD_ATA_DA0__IPU_DIAGB_26 +811 MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 +812 MX35_PAD_ATA_DA1__ATA_DA_1 +813 MX35_PAD_ATA_DA1__IPU_CSI_D_6 +814 MX35_PAD_ATA_DA1__KPP_COL_2 +815 MX35_PAD_ATA_DA1__GPIO3_1 +816 MX35_PAD_ATA_DA1__IPU_DIAGB_27 +817 MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 +818 MX35_PAD_ATA_DA2__ATA_DA_2 +819 MX35_PAD_ATA_DA2__IPU_CSI_D_7 +820 MX35_PAD_ATA_DA2__KPP_COL_3 +821 MX35_PAD_ATA_DA2__GPIO3_2 +822 MX35_PAD_ATA_DA2__IPU_DIAGB_28 +823 MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 +824 MX35_PAD_MLB_CLK__MLB_MLBCLK +825 MX35_PAD_MLB_CLK__GPIO3_3 +826 MX35_PAD_MLB_DAT__MLB_MLBDAT +827 MX35_PAD_MLB_DAT__GPIO3_4 +828 MX35_PAD_MLB_SIG__MLB_MLBSIG +829 MX35_PAD_MLB_SIG__GPIO3_5 +830 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK +831 MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 +832 MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX +833 MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR +834 MX35_PAD_FEC_TX_CLK__CSPI2_MOSI +835 MX35_PAD_FEC_TX_CLK__GPIO3_6 +836 MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC +837 MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 +838 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK +839 MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 +840 MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX +841 MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP +842 MX35_PAD_FEC_RX_CLK__CSPI2_MISO +843 MX35_PAD_FEC_RX_CLK__GPIO3_7 +844 MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I +845 MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 +846 MX35_PAD_FEC_RX_DV__FEC_RX_DV +847 MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 +848 MX35_PAD_FEC_RX_DV__UART3_RTS +849 MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT +850 MX35_PAD_FEC_RX_DV__CSPI2_SCLK +851 MX35_PAD_FEC_RX_DV__GPIO3_8 +852 MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK +853 MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 +854 MX35_PAD_FEC_COL__FEC_COL +855 MX35_PAD_FEC_COL__ESDHC1_DAT7 +856 MX35_PAD_FEC_COL__UART3_CTS +857 MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 +858 MX35_PAD_FEC_COL__CSPI2_RDY +859 MX35_PAD_FEC_COL__GPIO3_9 +860 MX35_PAD_FEC_COL__IPU_DISPB_SER_RS +861 MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 +862 MX35_PAD_FEC_RDATA0__FEC_RDATA_0 +863 MX35_PAD_FEC_RDATA0__PWM_PWMO +864 MX35_PAD_FEC_RDATA0__UART3_DTR +865 MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 +866 MX35_PAD_FEC_RDATA0__CSPI2_SS0 +867 MX35_PAD_FEC_RDATA0__GPIO3_10 +868 MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 +869 MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 +870 MX35_PAD_FEC_TDATA0__FEC_TDATA_0 +871 MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 +872 MX35_PAD_FEC_TDATA0__UART3_DSR +873 MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 +874 MX35_PAD_FEC_TDATA0__CSPI2_SS1 +875 MX35_PAD_FEC_TDATA0__GPIO3_11 +876 MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 +877 MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 +878 MX35_PAD_FEC_TX_EN__FEC_TX_EN +879 MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 +880 MX35_PAD_FEC_TX_EN__UART3_RI +881 MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 +882 MX35_PAD_FEC_TX_EN__GPIO3_12 +883 MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS +884 MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 +885 MX35_PAD_FEC_MDC__FEC_MDC +886 MX35_PAD_FEC_MDC__CAN2_TXCAN +887 MX35_PAD_FEC_MDC__UART3_DCD +888 MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 +889 MX35_PAD_FEC_MDC__GPIO3_13 +890 MX35_PAD_FEC_MDC__IPU_DISPB_WR +891 MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 +892 MX35_PAD_FEC_MDIO__FEC_MDIO +893 MX35_PAD_FEC_MDIO__CAN2_RXCAN +894 MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 +895 MX35_PAD_FEC_MDIO__GPIO3_14 +896 MX35_PAD_FEC_MDIO__IPU_DISPB_RD +897 MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 +898 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR +899 MX35_PAD_FEC_TX_ERR__OWIRE_LINE +900 MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK +901 MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 +902 MX35_PAD_FEC_TX_ERR__GPIO3_15 +903 MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC +904 MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 +905 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR +906 MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 +907 MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 +908 MX35_PAD_FEC_RX_ERR__KPP_COL_4 +909 MX35_PAD_FEC_RX_ERR__GPIO3_16 +910 MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO +911 MX35_PAD_FEC_CRS__FEC_CRS +912 MX35_PAD_FEC_CRS__IPU_CSI_D_1 +913 MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR +914 MX35_PAD_FEC_CRS__KPP_COL_5 +915 MX35_PAD_FEC_CRS__GPIO3_17 +916 MX35_PAD_FEC_CRS__IPU_FLASH_STROBE +917 MX35_PAD_FEC_RDATA1__FEC_RDATA_1 +918 MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 +919 MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC +920 MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC +921 MX35_PAD_FEC_RDATA1__KPP_COL_6 +922 MX35_PAD_FEC_RDATA1__GPIO3_18 +923 MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 +924 MX35_PAD_FEC_TDATA1__FEC_TDATA_1 +925 MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 +926 MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS +927 MX35_PAD_FEC_TDATA1__KPP_COL_7 +928 MX35_PAD_FEC_TDATA1__GPIO3_19 +929 MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 +930 MX35_PAD_FEC_RDATA2__FEC_RDATA_2 +931 MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 +932 MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD +933 MX35_PAD_FEC_RDATA2__KPP_ROW_4 +934 MX35_PAD_FEC_RDATA2__GPIO3_20 +935 MX35_PAD_FEC_TDATA2__FEC_TDATA_2 +936 MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 +937 MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD +938 MX35_PAD_FEC_TDATA2__KPP_ROW_5 +939 MX35_PAD_FEC_TDATA2__GPIO3_21 +940 MX35_PAD_FEC_RDATA3__FEC_RDATA_3 +941 MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 +942 MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC +943 MX35_PAD_FEC_RDATA3__KPP_ROW_6 +944 MX35_PAD_FEC_RDATA3__GPIO3_22 +945 MX35_PAD_FEC_TDATA3__FEC_TDATA_3 +946 MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 +947 MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS +948 MX35_PAD_FEC_TDATA3__KPP_ROW_7 +949 MX35_PAD_FEC_TDATA3__GPIO3_23 +950 MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK +951 MX35_PAD_TEST_MODE__TCU_TEST_MODE diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt new file mode 100644 index 00000000000..daa76895606 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt @@ -0,0 +1,83 @@ +Lantiq FALCON pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-falcon" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, + jtag, slic, pcm, asc1 + + functions: + rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down +- lantiq,drive-current: Boolean, enables drive-current +- lantiq,slew-rate: Boolean, enables slew-rate + +Example: + pinmux0 { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt new file mode 100644 index 00000000000..b5469db1d7a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt @@ -0,0 +1,97 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, + req3 + + additional mux groups (XR9 only): + mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for XWAY pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for XR9 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Example: + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt new file mode 100644 index 00000000000..01ef408e205 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt @@ -0,0 +1,95 @@ +* Marvell Armada 370 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6710-pinctrl" + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, uart0(rxd) +mpp1 1 gpo, uart0(txd) +mpp2 2 gpio, i2c0(sck), uart0(txd) +mpp3 3 gpio, i2c0(sda), uart0(rxd) +mpp4 4 gpio, cpu_pd(vdd) +mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk) +mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo) +mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk) +mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk) +mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo) +mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi) +mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1), + sata1(prsnt), spi1(cs1) +mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0), + audio(spdifi) +mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk), + audio(rmclk) +mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi), + spi0(cs2) +mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso), + spi0(cs3) +mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk) +mpp17 17 gpo, ge(mdc) +mpp18 18 gpio, ge(mdio) +mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk) +mpp20 20 gpo, ge0(txd4), ge1(txd0) +mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd) +mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts) +mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi) +mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0) +mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd) +mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso) +mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts) +mpp28 28 gpio, ge0(rxd5), ge1(rxd3) +mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda) +mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck) +mpp31 31 gpio, tclk, ge0(txerr) +mpp32 32 gpio, spi0(cs0) +mpp33 33 gpio, dev(bootcs), spi0(cs0) +mpp34 34 gpo, dev(wen0), spi0(mosi) +mpp35 35 gpo, dev(oen), spi0(sck) +mpp36 36 gpo, dev(a1), spi0(miso) +mpp37 37 gpo, dev(a0), sata0(prsnt) +mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts) +mpp39 39 gpo, dev(ad0), audio(spdifo) +mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts) +mpp41 41 gpio, dev(ad2), uart1(rxd) +mpp42 42 gpo, dev(ad3), uart1(txd) +mpp43 43 gpo, dev(ad4), audio(bclk) +mpp44 44 gpo, dev(ad5), audio(mclk) +mpp45 45 gpo, dev(ad6), audio(lrclk) +mpp46 46 gpo, dev(ad7), audio(sdo) +mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo) +mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt), + spi0(cs1) +mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0), + audio(spdifi) +mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso), + audio(rmclk) +mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi) +mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck) +mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2), + pcie(clkreq1) +mpp54 54 gpo, dev(ad15), tdm(dtx) +mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt), + sata0(prsnt) +mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3), + pcie(clkreq0), spi1(cs1) +mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt), + audio(sdo) +mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk), + uart0(rts) +mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk) +mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out), + audio(sdi) +mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) +mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), + audio(mclk), uart0(cts) +mpp63 63 gpo, spi0(sck), tclk +mpp64 64 gpio, spi0(miso), spi0-1(cs1) +mpp65 65 gpio, spi0(mosi), spi0-1(cs2) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt new file mode 100644 index 00000000000..bfa0a2e5e0c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt @@ -0,0 +1,100 @@ +* Marvell Armada XP SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl", + "marvell,mv78460-pinctrl" + +This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Armada XP (all variants) + +name pins functions +================================================================================ +mpp0 0 gpio, ge0(txclko), lcd(d0) +mpp1 1 gpio, ge0(txd0), lcd(d1) +mpp2 2 gpio, ge0(txd1), lcd(d2) +mpp3 3 gpio, ge0(txd2), lcd(d3) +mpp4 4 gpio, ge0(txd3), lcd(d4) +mpp5 5 gpio, ge0(txctl), lcd(d5) +mpp6 6 gpio, ge0(rxd0), lcd(d6) +mpp7 7 gpio, ge0(rxd1), lcd(d7) +mpp8 8 gpio, ge0(rxd2), lcd(d8) +mpp9 9 gpio, ge0(rxd3), lcd(d9) +mpp10 10 gpio, ge0(rxctl), lcd(d10) +mpp11 11 gpio, ge0(rxclk), lcd(d11) +mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12) +mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13) +mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15) +mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17) +mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig) +mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq) +mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) +mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) +mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) +mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) +mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst) +mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk) +mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd) +mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig) +mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq) +mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd) +mpp30 30 gpio, tdm(int1), sd0(clk) +mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd) +mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd) +mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) +mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) +mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt) +mpp36 36 gpio, spi(mosi) +mpp37 37 gpio, spi(miso) +mpp38 38 gpio, spi(sck) +mpp39 39 gpio, spi(cs0) +mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd), + pcie(clkreq0) +mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), + pcie(clkreq1) +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer), + vdd(cpu0-pd) +mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout), + vdd(cpu2-3-pd){1} +mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), + mem(bat) +mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) +mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) +mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), + ref(clkout) +mpp48 48 gpio, tclk, dev(burst/last) + +* Marvell Armada XP (mv78260 and mv78460 only) + +name pins functions +================================================================================ +mpp49 49 gpio, dev(we3) +mpp50 50 gpio, dev(we2) +mpp51 51 gpio, dev(ad16) +mpp52 52 gpio, dev(ad17) +mpp53 53 gpio, dev(ad18) +mpp54 54 gpio, dev(ad19) +mpp55 55 gpio, dev(ad20), vdd(cpu0-pd) +mpp56 56 gpio, dev(ad21), vdd(cpu1-pd) +mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1} +mpp58 58 gpio, dev(ad23) +mpp59 59 gpio, dev(ad24) +mpp60 60 gpio, dev(ad25) +mpp61 61 gpio, dev(ad26) +mpp62 62 gpio, dev(ad27) +mpp63 63 gpio, dev(ad28) +mpp64 64 gpio, dev(ad29) +mpp65 65 gpio, dev(ad30) +mpp66 66 gpio, dev(ad31) + +Notes: +* {1} vdd(cpu2-3-pd) only available on mv78460. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt new file mode 100644 index 00000000000..a648aaad611 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt @@ -0,0 +1,72 @@ +* Marvell Dove SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,dove-pinctrl" +- clocks: (optional) phandle of pdma clock + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm) +mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm) +mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt), + uart1(rts) +mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act), + uart1(cts), lcd-spi(cs1) +mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso) +mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs) +mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi) +mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck) +mpp8 8 gpio, pmu, watchdog(rstout) +mpp9 9 gpio, pmu, pex1(clkreq) +mpp10 10 gpio, pmu, ssp(sclk) +mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl), + sdio1(ledctrl), pex0(clkreq) +mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act) +mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp), + ssp(extclk) +mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd) +mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm) +mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1) +mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda), + ac97-1(sysclko) +mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm) +mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck) +mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso), + ac97(sysclko) +mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0), + uart1(cts), ssp(sfrm) +mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi), + lcd-spi(mosi), uart1(cts), ssp(txd) +mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck), + lcd-spi(sck), ssp(sclk) +mpp_camera 24-39 gpio, camera +mpp_sdio0 40-45 gpio, sdio0 +mpp_sdio1 46-51 gpio, sdio1 +mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp, + ssp/twsi +mpp_spi0 58-61 gpio, spi0 +mpp_uart1 62-63 gpio, uart1 +mpp_nand 64-71 gpo, nand +audio0 - i2s, ac97 +twsi - none, opt1, opt2, opt3 + +Notes: +* group "mpp_audio1" allows the following functions and gpio pins: + - gpio : gpio on pins 52-57 + - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios + - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57 + - spdifo : spdifo on pin 57, gpio on pins 52-55 + - twsi : twsi on pins 56,57, gpio on pins 52-55 + - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios + - ssp : ssp on pins 52-55, gpio on pins 56,57 + - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios +* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated + audio0 pins. +* group "twsi" internally muxes twsi controller to the dedicated or option pins. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt new file mode 100644 index 00000000000..361bccb7ec8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -0,0 +1,279 @@ +* Marvell Kirkwood SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6180-pinctrl", + "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Kirkwood 88f6180 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, mii(rxerr) +mpp21 21 gpio, audio(spdifi) +mpp22 22 gpio, audio(spdifo) +mpp23 23 gpio, audio(rmclk) +mpp24 24 gpio, audio(bclk) +mpp25 25 gpio, audio(sdo) +mpp26 26 gpio, audio(lrclk) +mpp27 27 gpio, audio(mclk) +mpp28 28 gpio, audio(sdi) +mpp29 29 gpio, audio(extclk) + +* Marvell Kirkwood 88f6190 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0) +mpp21 21 gpio, ge1(txd1), sata0(act) +mpp22 22 gpio, ge1(txd2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt) +mpp24 24 gpio, ge1(rxd0) +mpp25 25 gpio, ge1(rxd1) +mpp26 26 gpio, ge1(rxd2) +mpp27 27 gpio, ge1(rxd3) +mpp28 28 gpio, ge1(col) +mpp29 29 gpio, ge1(txclk) +mpp30 30 gpio, ge1(rxclk) +mpp31 31 gpio, ge1(rxclk) +mpp32 32 gpio, ge1(txclko) +mpp33 33 gpo, ge1(txclk) +mpp34 34 gpio, ge1(txen) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr) + +* Marvell Kirkwood 88f6192 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) + +* Marvell Kirkwood 88f6281 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpio, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk) +mpp45 45 gpio, ts(mp9), tdm(pclk) +mpp46 46 gpio, ts(mp10), tdm(fs) +mpp47 47 gpio, ts(mp11), tdm(drx) +mpp48 48 gpio, ts(mp12), tdm(dtx) +mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk) + +* Marvell Kirkwood 88f6282 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync) +mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, spi(cs), lcd(pwm) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col), + mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs), + sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act) +mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda) +mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt), + audio(spdifi), audio-1(sdi) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act), + spi(cs) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act), lcd(extclk) +mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck) +mpp18 18 gpo, nand(io0), pex(clkreq) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act), lcd(d0) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo), lcd(d1) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt), lcd(d2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk), lcd(d3) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo), + lcd(d4) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk), + lcd(d5) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk), + lcd(d6) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi), + lcd(d7) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk), + lcd(d8) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12) +mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql), + lcd(d15) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk) +mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e) +mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) +mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) +mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) +mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt new file mode 100644 index 00000000000..0a26c3aa4e6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt @@ -0,0 +1,46 @@ +* Marvell SoC pinctrl core driver for mpp + +The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins +(mpp) to a specific function. For each SoC family there is a SoC specific +driver using this core driver. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +A Marvell SoC pin configuration node is a node of a group of pins which can +be used for a specific device or function. Each node requires one or more +mpp pins or group of pins and a mpp function common to all pins. + +Required properties for pinctrl driver: +- compatible: "marvell,<soc>-pinctrl" + Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs. + +Required properties for pin configuration node: +- marvell,pins: string array of mpp pins or group of pins to be muxed. +- marvell,function: string representing a function to mux to for all + marvell,pins given in this pin configuration node. The function has to be + common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for + valid pin/pin group names and available function names for each SoC. + +Examples: + +uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <7>; + + pinctrl-0 = <&pmx_uart1_sw>; + pinctrl-names = "default"; +}; + +pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x20>; + + pmx_uart1_sw: pmx-uart1-sw { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 5187f0dd8b2..2c81e45f137 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -14,10 +14,12 @@ Optional properties: - pinctrl-single,function-off : function off mode for disabled state if available and same for all registers; if not specified, disabling of pin functions is ignored +- pinctrl-single,bit-per-mux : boolean to indicate that one register controls + more than one pin -This driver assumes that there is only one register for each pin, -and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt -document in this directory. +This driver assumes that there is only one register for each pin (unless the +pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as +specified in the pinctrl-bindings.txt document in this directory. The pin configuration nodes for pinctrl-single are specified as pinctrl register offset and value pairs using pinctrl-single,pins. Only the bits @@ -31,6 +33,15 @@ device pinctrl register, and 0x118 contains the desired value of the pinctrl register. See the device example and static board pins example below for more information. +In case when one register changes more than one pin's mux the +pinctrl-single,bits need to be used which takes three parameters: + + pinctrl-single,bits = <0xdc 0x18, 0xff>; + +Where 0xdc is the offset from the pinctrl register base address for the +device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to +be used when applying this change to the register. + Example: /* SoC common file */ @@ -55,6 +66,15 @@ pmx_wkup: pinmux@4a31e040 { pinctrl-single,function-mask = <0xffff>; }; +control_devconf0: pinmux@48002274 { + compatible = "pinctrl-single"; + reg = <0x48002274 4>; /* Single register */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x5F>; +}; /* board specific .dts file */ @@ -87,6 +107,21 @@ pmx_wkup: pinmux@4a31e040 { }; }; +&control_devconf0 { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,bits = < + 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ + >; + }; + + mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { + pinctrl-single,bits = < + 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ + >; + }; + +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt new file mode 100644 index 00000000000..03dee50532f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -0,0 +1,196 @@ +Samsung GPIO and Pin Mux/Config controller + +Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware +controller. It controls the input/output settings on the available pads/pins +and also provides ability to multiplex and configure the output of various +on-chip controllers onto these pads. + +Required Properties: +- compatible: should be one of the following. + - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller. + - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller. + +- reg: Base address of the pin controller hardware module and length of + the address space it occupies. + +- interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + +- Pin mux/config groups as child nodes: The pin mux (selecting pin function + mode) and pin config (pull up/down, driver strength) settings are represented + as child nodes of the pin-controller node. There should be atleast one + child node and there is no limit on the count of these child nodes. + + The child node should contain a list of pin(s) on which a particular pin + function selection or pin configuration (or both) have to applied. This + list of pins is specified using the property name "samsung,pins". There + should be atleast one pin specfied for this property and there is no upper + limit on the count of pins that can be specified. The pins are specified + using pin names which are derived from the hardware manual of the SoC. As + an example, the pins in GPA0 bank of the pin controller can be represented + as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case. + The format of the pin names should be (as per the hardware manual) + "[pin bank name]-[pin number within the bank]". + + The pin function selection that should be applied on the pins listed in the + child node is specified using the "samsung,pin-function" property. The value + of this property that should be applied to each of the pins listed in the + "samsung,pins" property should be picked from the hardware manual of the SoC + for the specified pin group. This property is optional in the child node if + no specific function selection is desired for the pins listed in the child + node. The value of this property is used as-is to program the pin-controller + function selector register of the pin-bank. + + The child node can also optionally specify one or more of the pin + configuration that should be applied on all the pins listed in the + "samsung,pins" property of the child node. The following pin configuration + properties are supported. + + - samsung,pin-pud: Pull up/down configuration. + - samsung,pin-drv: Drive strength configuration. + - samsung,pin-pud-pdn: Pull up/down configuration in power down mode. + - samsung,pin-drv-pdn: Drive strength configuration in power down mode. + + The values specified by these config properties should be derived from the + hardware manual and these values are programmed as-is into the pin + pull up/down and driver strength register of the pin-controller. + + Note: A child should include atleast a pin function selection property or + pin configuration property (one or more) or both. + + The client nodes that require a particular pin function selection and/or + pin configuration should use the bindings listed in the "pinctrl-bindings.txt" + file. + +External GPIO and Wakeup Interrupts: + +The controller supports two types of external interrupts over gpio. The first +is the external gpio interrupt and second is the external wakeup interrupts. +The difference between the two is that the external wakeup interrupts can be +used as system wakeup events. + +A. External GPIO Interrupts: For supporting external gpio interrupts, the + following properties should be specified in the pin-controller device node. + +- interrupt-controller: identifies the controller node as interrupt-parent. +- #interrupt-cells: the value of this property should be 2. + - First Cell: represents the external gpio interrupt number local to the + external gpio interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered + +B. External Wakeup Interrupts: For supporting external wakeup interrupts, a + child node representing the external wakeup interrupt controller should be + included in the pin-controller device node. This child node should include + the following properties. + + - compatible: identifies the type of the external wakeup interrupt controller + The possible values are: + - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller + found on Samsung Exynos4210 SoC. + - interrupt-parent: phandle of the interrupt parent to which the external + wakeup interrupts are forwarded to. + - interrupt-controller: identifies the node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2 + - First Cell: represents the external wakeup interrupt number local to + the external wakeup interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered + +Aliases: + +All the pin controller nodes should be represented in the aliases node using +the following format 'pinctrl{n}' where n is a unique number for the alias. + +Example 1: A pin-controller node with pin groups. + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + +Example 2: A pin-controller node with external wakeup interrupt controller node. + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + interrupt-controller; + #interrupt-cells = <2>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, + <0 32 0>; + }; + }; + +Example 3: A uart client node that supports 'default' and 'flow-control' states. + + uart@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + pinctrl-names = "default", "flow-control; + pinctrl-0 = <&uart0_data>; + pinctrl-1 = <&uart0_data &uart0_fctl>; + }; + +Example 4: Set up the default pin state for uart controller. + + static int s3c24xx_serial_probe(struct platform_device *pdev) { + struct pinctrl *pinctrl; + ... + ... + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + } diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt new file mode 100644 index 00000000000..74499e5033f --- /dev/null +++ b/Documentation/devicetree/bindings/power/opp.txt @@ -0,0 +1,25 @@ +* Generic OPP Interface + +SoCs have a standard set of tuples consisting of frequency and +voltage pairs that the device will support per voltage domain. These +are called Operating Performance Points or OPPs. + +Properties: +- operating-points: An array of 2-tuples items, and each item consists + of frequency and voltage like <freq-kHz vol-uV>. + freq: clock frequency in kHz + vol: voltage in microvolt + +Examples: + +cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt index 939a26d541f..d5e370450ac 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt @@ -12,9 +12,12 @@ Properties: - #size-cells : Either one or two, depending on how large each chipselect can be. - reg : Offset and length of the register set for the device -- interrupts : IFC has two interrupts. The first one is the "common" - interrupt(CM_EVTER_STAT), and second is the NAND interrupt - (NAND_EVTER_STAT). +- interrupts: IFC may have one or two interrupts. If two interrupt + specifiers are present, the first is the "common" + interrupt (CM_EVTER_STAT), and the second is the NAND + interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + - ranges : Each range corresponds to a single chipselect, and covers the entire access window as configured. diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index b16f4a57d11..11963e4d6bc 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -11,7 +11,7 @@ Example: pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; }; diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 00000000000..1267b3e1a2c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 00000000000..371eccd1cd6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,69 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + +The valid names for regulators are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + mbatt_reg: mbatt { + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sd1 { + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sd2 { + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 66ece3f87bb..ecfc6ccd67e 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,10 +11,13 @@ Optional properties: - regulator-boot-on: bootloader/firmware enabled regulator - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) + +Deprecated properties: - regulator-compatible: If a regulator chip contains multiple regulators, and if the chip's binding contains a child node that describes each regulator, then this property indicates which regulator - this child node is intended to configure. + this child node is intended to configure. If this property is missing, + the node's name will be used instead. Example: diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index 0487e9675ba..d316fb895da 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -22,66 +22,49 @@ Example: compatible = "ti,tps65217"; regulators { - #address-cells = <1>; - #size-cells = <0>; - - dcdc1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "dcdc1"; + dcdc1_reg: dcdc1 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - dcdc2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "dcdc2"; + dcdc2_reg: dcdc2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - dcdc3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "dcdc3"; + dcdc3_reg: dcc3 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - ldo1_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo2_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo3_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo4_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db1..8b40cac24d9 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -6,20 +6,31 @@ Required properties: - interrupts: the interrupt outputs of the controller - #gpio-cells: number of cells to describe a GPIO - gpio-controller: mark the device as a GPIO controller -- regulators: list of regulators provided by this controller, must have - property "regulator-compatible" to match their hardware counterparts: - sm[0-2], ldo[0-9] and ldo_rtc -- sm0-supply: The input supply for the SM0. -- sm1-supply: The input supply for the SM1. -- sm2-supply: The input supply for the SM2. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. - vinldo01-supply: The input supply for the LDO1 and LDO2 - vinldo23-supply: The input supply for the LDO2 and LDO3 - vinldo4-supply: The input supply for the LDO4 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 - vinldo9-supply: The input supply for the LDO9 +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + Each regulator is defined using the standard binding for regulators. +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + Example: pmu: tps6586x@34 { @@ -30,9 +41,12 @@ Example: #gpio-cells = <2>; gpio-controller; - sm0-supply = <&some_reg>; - sm1-supply = <&some_reg>; - sm2-supply = <&some_reg>; + ti,system-power-controller; + + sys-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; vinldo01-supply = <...>; vinldo23-supply = <...>; vinldo4-supply = <...>; @@ -40,103 +54,80 @@ Example: vinldo9-supply = <...>; regulators { - #address-cells = <1>; - #size-cells = <0>; + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; - sm0_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sm0"; + sm0_reg: sm0 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm1_reg: regulator@1 { - reg = <1>; - regulator-compatible = "sm1"; + sm1_reg: sm1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm2_reg: regulator@2 { - reg = <2>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; regulator-boot-on; regulator-always-on; }; - ldo0_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo0"; + ldo0_reg: ldo0 { regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5_reg: ldo5 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6_reg: ldo6 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7_reg: ldo7 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8_reg: ldo8 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: regulator@12 { - reg = <12>; - regulator-compatible = "ldo9"; + ldo9_reg: ldo9 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt new file mode 100644 index 00000000000..8c6672a1b7d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt @@ -0,0 +1,14 @@ +* PXA RTC + +PXA specific RTC driver. + +Required properties: +- compatible : Should be "marvell,pxa-rtc" + +Examples: + +rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; +}; diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt new file mode 100644 index 00000000000..fb61ed77ada --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details. diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt new file mode 100644 index 00000000000..3c0484c4958 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Realtime Clock Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-rtc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : alarm interrupt + +Example: + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt new file mode 100644 index 00000000000..c58573b5b1a --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -0,0 +1,35 @@ +* Freescale i.MX UART controller + +Required properties: +- compatible : should be "fsl,imx21-uart" +- reg : Address and length of the register set for the device +- interrupts : Should contain UART interrupt number + +Optional properties: +- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used + +Note: Each uart controller should have an alias correctly numbered +in "aliases" node. + +Example: + +- From imx51.dtsi: +aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +}; + +uart1: serial@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + status = "disabled"; +} + +- From imx51-babbage.dts: +uart1: serial@73fbc000 { + fsl,uart-has-rtscts; + status = "okay"; +}; + diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt new file mode 100644 index 00000000000..6b222f9b8ef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -0,0 +1,21 @@ +CS4270 audio CODEC + +The driver for this device currently only supports I2C. + +Required properties: + + - compatible : "cirrus,cs4270" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpio : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + +Example: + +codec: cs4270@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; +}; diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt new file mode 100644 index 00000000000..c81b5fd5a5b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -0,0 +1,36 @@ +Cirrus Logic CS4271 DT bindings + +This driver supports both the I2C and the SPI bus. + +Required properties: + + - compatible: "cirrus,cs4271" + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Required properties on I2C: + + - reg: the i2c address + + +Optional properties: + + - reset-gpio: a GPIO spec to define which pin is connected to the chip's + !RESET pin + +Examples: + + codec_i2c: cs4271@10 { + compatible = "cirrus,cs4271"; + reg = <0x10>; + reset-gpio = <&gpio 23 0>; + }; + + codec_spi: cs4271@0 { + compatible = "cirrus,cs4271"; + reg = <0x0>; + reset-gpio = <&gpio 23 0>; + spi-max-frequency = <6000000>; + }; + diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt new file mode 100644 index 00000000000..374e145c2ef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -0,0 +1,45 @@ +Texas Instruments McASP controller + +Required properties: +- compatible : + "ti,dm646x-mcasp-audio" : for DM646x platforms + "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms + "ti,omap2-mcasp-audio" : for OMAP2 platforms (TI81xx, AM33xx) + +- reg : Should contain McASP registers offset and length +- interrupts : Interrupt number for McASP +- op-mode : I2S/DIT ops mode. +- tdm-slots : Slots for TDM operation. +- num-serializer : Serializers used by McASP. +- serial-dir : A list of serializer pin mode. The list number should be equal + to "num-serializer" parameter. Each entry is a number indication + serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX) + + +Optional properties: + +- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 +- tx-num-evt : FIFO levels. +- rx-num-evt : FIFO levels. +- sram-size-playback : size of sram to be allocated during playback +- sram-size-capture : size of sram to be allocated during capture + +Example: + +mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000 0x3000>; + interrupts = <82 83>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt new file mode 100644 index 00000000000..65dec876cb2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -0,0 +1,91 @@ +* Texas Instruments OMAP4+ and twl6040 based audio setups + +Required properties: +- compatible: "ti,abe-twl6040" +- ti,model: Name of the sound card ( for example "SDP4430") +- ti,mclk-freq: MCLK frequency for HPPLL operation +- ti,mcpdm: phandle for the McPDM node +- ti,twl6040: phandle for the twl6040 core node +- ti,audio-routing: List of connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + +Optional properties: +- ti,dmic: phandle for the OMAP dmic node if the machine have it connected +- ti,jack_detection: Need to be set to <1> if the board capable to detect jack + insertion, removal. + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headset Stereophone + * Earphone Spk + * Ext Spk + * Line Out + * Vibrator + * Headset Mic + * Main Handset Mic + * Sub Handset Mic + * Line In + * Digital Mic + +twl6040 pins: + * HSOL + * HSOR + * EP + * HFL + * HFR + * AUXL + * AUXR + * VIBRAL + * VIBRAR + * HSMIC + * MAINMIC + * SUBMIC + * AFML + * AFMR + + * Headset Mic Bias + * Main Mic Bias + * Digital Mic1 Bias + * Digital Mic2 Bias + +Digital mic pins: + * DMic + +Example: + +sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt new file mode 100644 index 00000000000..17cce449045 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt @@ -0,0 +1,37 @@ +* Texas Instruments OMAP2+ McBSP module + +Required properties: +- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420 + "ti,omap2430-mcbsp" for McBSP on OMAP2430 + "ti,omap3-mcbsp" for McBSP on OMAP3 + "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC +- reg: Register location and size, for OMAP4+ as an array: + <MPU access base address, size>, + <L3 interconnect address, size>; +- reg-names: Array of strings associated with the address space +- interrupts: Interrupt numbers for the McBSP port, as an array in case the + McBSP IP have more interrupt lines: + <OCP compliant irq>, + <TX irq>, + <RX irq>; +- interrupt-names: Array of strings associated with the interrupt numbers +- interrupt-parent: The parent interrupt controller +- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC) +- ti,hwmods: Name of the hwmod associated to the McBSP port + +Example: + +mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <0 17 0x4>, /* OCP compliant interrupt */ + <0 62 0x4>, /* TX interrupt */ + <0 63 0x4>, /* RX interrupt */ + <0 4 0x4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt new file mode 100644 index 00000000000..6fae51c7f76 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -0,0 +1,17 @@ +* Texas Instruments SoC with twl4030 based audio setups + +Required properties: +- compatible: "ti,omap-twl4030" +- ti,model: Name of the sound card (for example "omap3beagle") +- ti,mcbsp: phandle for the McBSP node +- ti,codec: phandle for the twl4030 audio node + +Example: + +sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt new file mode 100644 index 00000000000..e7b98f41fa5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -0,0 +1,20 @@ +Texas Instruments - tlv320aic3x Codec module + +The tlv320aic3x serial control bus communicates through I2C protocols + +Required properties: +- compatible - "string" - "ti,tlv320aic3x" +- reg - <int> - I2C slave address + + +Optional properties: + +- gpio-reset - gpio pin number used for codec reset +- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + +Example: + +tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; +}; diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt new file mode 100644 index 00000000000..48e071c96b4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt @@ -0,0 +1,39 @@ +* MOP500 Audio Machine Driver + +This node is responsible for linking together all ux500 Audio Driver components. + +Required properties: + - compatible : "stericsson,snd-soc-mop500" + +Non-standard properties: + - stericsson,cpu-dai : Phandle to the CPU-side DAI + - stericsson,audio-codec : Phandle to the Audio CODEC + - stericsson,card-name : Over-ride default card name + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt new file mode 100644 index 00000000000..99acd9c774e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt @@ -0,0 +1,43 @@ +* ux500 MSP (CPU-side Digital Audio Interface) + +Required properties: + - compatible :"stericsson,ux500-msp-i2s" + - reg : Physical base address and length of the device's registers. + +Optional properties: + - interrupts : The interrupt output from the device. + - interrupt-parent : The parent interrupt controller. + - <name>-supply : Phandle to the regulator <name> supply + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,platform-pcm-dma = <&pcm>; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + pcm: ux500-pcm { + compatible = "stericsson,ux500-pcm"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt new file mode 100644 index 00000000000..e2e13957c2a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt @@ -0,0 +1,22 @@ +* Freescale MX233/MX28 SSP/SPI + +Required properties: +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28" +- reg: Offset and length of the register set for the device +- interrupts: Should contain SSP interrupts (error irq first, dma irq second) +- fsl,ssp-dma-channel: APBX DMA channel for the SSP + +Optional properties: +- clock-frequency : Input clock frequency to the SPI block in Hz. + Default is 160000000 Hz. + +Example: + +ssp0: ssp@80010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + reg = <0x80010000 0x2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index e782add2e45..d2c33d0f533 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -21,6 +21,9 @@ assumption that board specific platform code will be used to manage chip selects. Individual drivers can define additional properties to support describing the chip select layout. +Optional property: +- num-cs : total number of chipselects + SPI slave nodes must be children of the SPI master node and can contain the following properties. - reg - (required) chip select address of device. diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt new file mode 100644 index 00000000000..8a824be1575 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt @@ -0,0 +1,29 @@ +SPI-GPIO devicetree bindings + +Required properties: + + - compatible: should be set to "spi-gpio" + - #address-cells: should be set to <0x1> + - ranges + - gpio-sck: GPIO spec for the SCK line to use + - gpio-miso: GPIO spec for the MISO line to use + - gpio-mosi: GPIO spec for the MOSI line to use + - cs-gpios: GPIOs to use for chipselect lines + - num-chipselects: number of chipselect lines + +Example: + + spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + ranges; + + gpio-sck = <&gpio 95 0>; + gpio-miso = <&gpio 98 0>; + gpio-mosi = <&gpio 97 0>; + cs-gpios = <&gpio 125 0>; + num-chipselects = <1>; + + /* clients */ + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-octeon.txt b/Documentation/devicetree/bindings/spi/spi-octeon.txt new file mode 100644 index 00000000000..431add19234 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-octeon.txt @@ -0,0 +1,33 @@ +Cavium, Inc. OCTEON SOC SPI master controller. + +Required properties: +- compatible : "cavium,octeon-3010-spi" +- reg : The register base for the controller. +- interrupts : One interrupt, used by the controller. +- #address-cells : <1>, as required by generic SPI binding. +- #size-cells : <0>, also as required by generic SPI binding. + +Child nodes as per the generic SPI binding. + +Example: + + spi@1070000001000 { + compatible = "cavium,octeon-3010-spi"; + reg = <0x10700 0x00001000 0x0 0x100>; + interrupts = <0 58>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-sc18is602.txt b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt new file mode 100644 index 00000000000..02f9033270a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt @@ -0,0 +1,23 @@ +NXP SC18IS602/SCIS603 + +Required properties: + - compatible : Should be one of + "nxp,sc18is602" + "nxp,sc18is602b" + "nxp,sc18is603" + - reg: I2C bus address + +Optional properties: + - clock-frequency : external oscillator clock frequency. If not + specified, the SC18IS602 default frequency (7372000) will be used. + +The clock-frequency property is relevant and needed only if the chip has an +external oscillator (SC18IS603). + +Example: + + sc18is603@28 { + compatible = "nxp,sc18is603"; + reg = <0x28>; + clock-frequency = <14744000>; + } diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt index 306ec3ff3c0..f158fd31cfd 100644 --- a/Documentation/devicetree/bindings/spi/spi_pl022.txt +++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt @@ -6,7 +6,29 @@ Required properties: - interrupts : Should contain SPI controller interrupt Optional properties: +- num-cs : total number of chipselects - cs-gpios : should specify GPIOs used for chipselects. The gpios will be referred to as reg = <index> in the SPI child nodes. If unspecified, a single SPI device without a chip select can be used. +- pl022,autosuspend-delay : delay in ms following transfer completion before + the runtime power management system suspends the + device. A setting of 0 indicates no delay and the + device will be suspended immediately +- pl022,rt : indicates the controller should run the message pump with realtime + priority to minimise the transfer latency on the bus (boolean) + + +SPI slave nodes must be children of the SPI master node and can +contain the following properties. + +- pl022,interface : interface type: + 0: SPI + 1: Texas Instruments Synchronous Serial Frame Format + 2: Microwire (Half Duplex) +- pl022,com-mode : polling, interrupt or dma +- pl022,rx-level-trig : Rx FIFO watermark level +- pl022,tx-level-trig : Tx FIFO watermark level +- pl022,ctrl-len : Microwire interface: Control length +- pl022,wait-state : Microwire interface: Wait state +- pl022,duplex : Microwire interface: Full/Half duplex diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt new file mode 100644 index 00000000000..801d58cb6d4 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt @@ -0,0 +1,15 @@ +* Freescale i.MX28 LRADC device driver + +Required properties: +- compatible: Should be "fsl,imx28-lradc" +- reg: Address and length of the register set for the device +- interrupts: Should contain the LRADC interrupts + +Examples: + + lradc@80050000 { + compatible = "fsl,imx28-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; + }; diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt new file mode 100644 index 00000000000..07654f0338b --- /dev/null +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt @@ -0,0 +1,41 @@ +Freescale i.MX IPUv3 +==================== + +Required properties: +- compatible: Should be "fsl,<chip>-ipu" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain sync interrupt and error interrupt, + in this order. +- #crtc-cells: 1, See below + +example: + +ipu: ipu@18000000 { + #crtc-cells = <1>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; +}; + +Parallel display support +======================== + +Required properties: +- compatible: Should be "fsl,imx-parallel-display" +- crtc: the crtc this display is connected to, see below +Optional properties: +- interface_pix_fmt: How this display is connected to the + crtc. Currently supported types: "rgb24", "rgb565" +- edid: verbatim EDID data block describing attached display. +- ddc: phandle describing the i2c bus handling the display data + channel + +example: + +display@di0 { + compatible = "fsl,imx-parallel-display"; + edid = [edid-data]; + crtc = <&ipu 0>; + interface-pix-fmt = "rgb24"; +}; diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt new file mode 100644 index 00000000000..2de21c2acf5 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -0,0 +1,22 @@ +BCM2835 System Timer + +The System Timer peripheral provides four 32-bit timer channels and a +single 64-bit free running counter. Each channel has an output compare +register, which is compared against the 32 least significant bits of the +free running counter values, and generates an interrupt. + +Required properties: + +- compatible : should be "brcm,bcm2835-system-timer.txt" +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 4 interrupt sinks; one per timer channel. +- clock-frequency : The frequency of the clock that drives the counter, in Hz. + +Example: + +timer { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + clock-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt new file mode 100644 index 00000000000..0d439dfc1aa --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt @@ -0,0 +1,14 @@ +* NXP LPC32xx SoC High Speed UART + +Required properties: +- compatible: Should be "nxp,lpc3220-hsuart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Example: + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 0>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 0847fdeee11..ba385f2e0dd 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -25,6 +25,8 @@ Optional properties: accesses to the UART (e.g. TI davinci). - used-by-rtas : set to indicate that the port is in use by the OpenFirmware RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode Example: diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt new file mode 100644 index 00000000000..5feef1ef167 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt @@ -0,0 +1,17 @@ +VIA/Wondermedia VT8500 UART Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-uart" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UART interrupt +- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) + +Example: + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt new file mode 100644 index 00000000000..ca8fa56e9f0 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -0,0 +1,14 @@ +AM33XX MUSB GLUE + - compatible : Should be "ti,musb-am33xx" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2" + represents PERIPHERAL. + - power : Should be "250". This signifies the controller can supply upto + 500mA when operating in host mode. diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt index 2c290418bb2..5778b9c83bd 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -7,7 +7,10 @@ Required properties: Optional properties: - fsl,usbphy: phandler of usb phy that connects to the only one port +- fsl,usbmisc: phandler of non-core register device, with one argument + that indicate usb controller index - vbus-supply: regulator for vbus +- disable-over-current: disable over current detect Examples: usb@02184000 { /* USB OTG */ @@ -15,4 +18,6 @@ usb@02184000 { /* USB OTG */ reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + disable-over-current; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt new file mode 100644 index 00000000000..29a043ecda5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -0,0 +1,33 @@ +OMAP GLUE + +OMAP MUSB GLUE + - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - interface_type : This is a board specific setting to describe the type of + interface between the controller and the phy. It should be "0" or "1" + specifying ULPI and UTMI respectively. + - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - power : Should be "50". This signifies the controller can supply upto + 100mA when operating in host mode. + +SOC specific device node entry +usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,omap4-musb"; + ti,hwmods = "usb_otg_hs"; + multipoint = <1>; + num_eps = <16>; + ram_bits = <12>; +}; + +Board specific device node entry +&usb_otg_hs { + interface_type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt new file mode 100644 index 00000000000..a4fb0719d15 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt @@ -0,0 +1,15 @@ +Generic Platform UHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "platform-uhci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UHCI controller interrupt + +Example: + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt new file mode 100644 index 00000000000..79729a948d5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/pxa-usb.txt @@ -0,0 +1,31 @@ +PXA USB controllers + +OHCI + +Required properties: + - compatible: Should be "marvell,pxa-ohci" for USB controllers + used in host mode. + +Optional properties: + - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3" + If present, enables the appropriate USB port of the controller. + - "marvell,port-mode" selects the mode of the ports: + 1 = PMM_NPS_MODE + 2 = PMM_GLOBAL_MODE + 3 = PMM_PERPORT_MODE + - "marvell,power-sense-low" - power sense pin is low-active. + - "marvell,power-control-low" - power control pin is low-active. + - "marvell,no-oc-protection" - disable over-current protection. + - "marvell,oc-mode-perport" - enable per-port over-current protection. + - "marvell,power_on_delay" Power On to Power Good time - in ms. + +Example: + + usb0: ohci@4c000000 { + compatible = "marvell,pxa-ohci", "usb-ohci"; + reg = <0x4c000000 0x100000>; + interrupts = <18>; + marvell,enable-port1; + marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ + }; + diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt new file mode 100644 index 00000000000..36b9aede3f4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt @@ -0,0 +1,40 @@ +USB COMPARATOR OF TWL CHIPS + +TWL6030 USB COMPARATOR + - compatible : Should be "ti,twl6030-usb" + - interrupts : Two interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts when + the controller has to act as host and the second interrupt number is the + usb interrupt number that raises VBUS interrupts when the controller has to + act as device + - usb-supply : phandle to the regulator device tree node. It should be vusb + if it is twl6030 or ldousb if it is twl6025 subclass. + +twl6030-usb { + compatible = "ti,twl6030-usb"; + interrupts = < 4 10 >; +}; + +Board specific device node entry +&twl6030-usb { + usb-supply = <&vusb>; +}; + +TWL4030 USB PHY AND COMPARATOR + - compatible : Should be "ti,twl4030-usb" + - interrupts : The interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts + and VBUS interrupts. The second interrupt number is optional. + - <supply-name>-supply : phandle to the regulator device tree node. + <supply-name> should be vusb1v5, vusb1v8 and vusb3v1 + - usb_mode : The mode used by the phy to connect to the controller. "1" + specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. + +twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = < 10 4 >; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt new file mode 100644 index 00000000000..80d4148cb66 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -0,0 +1,17 @@ +USB PHY + +OMAP USB2 PHY + +Required properties: + - compatible: Should be "ti,omap-usb2" + - reg : Address and length of the register set for the device. Also +add the address of control module dev conf register until a driver for +control module is added + +This is usually a subnode of ocp2scp to which it is connected. + +usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>, + <0x4a002300 0x4>; +}; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt new file mode 100644 index 00000000000..97ce94e1a6c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -0,0 +1,14 @@ +* Freescale i.MX non-core registers + +Required properties: +- #index-cells: Cells used to descibe usb controller index. Should be <1> +- compatible: Should be one of below: + "fsl,imx6q-usbmisc" for imx6q +- reg: Should contain registers location and length + +Examples: +usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; +}; diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt new file mode 100644 index 00000000000..17b3ad1d97e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 EHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-ehci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : ehci controller interrupt + +Example: + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt new file mode 100644 index 00000000000..5fb8fd6e250 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt @@ -0,0 +1,12 @@ +VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. + +Required properties: + - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". + - reg: Address range of the ehci registers. size should be 0x200 + - interrupts: Should contain the ehci interrupt. + +usb: ehci@D8007100 { + compatible = "wm,prizm-ehci", "usb-ehci"; + reg = <0xD8007100 0x200>; + interrupts = <1>; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index db4d3af3643..9de2b9ff9d6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -10,6 +10,7 @@ apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation bosch Bosch Sensortec GmbH +brcm Broadcom Corporation cavium Cavium, Inc. chrp Common Hardware Reference Platform cortina Cortina Systems, Inc. @@ -47,5 +48,7 @@ sirf SiRF Technology, Inc. st STMicroelectronics stericsson ST-Ericsson ti Texas Instruments +via VIA Technologies, Inc. wlf Wolfson Microelectronics +wm Wondermedia Technologies, Inc. xlnx Xilinx diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt new file mode 100644 index 00000000000..261df279931 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt new file mode 100644 index 00000000000..c870b6478ec --- /dev/null +++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt @@ -0,0 +1,62 @@ +VIA VT8500 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-fb" +- reg : Should contain 1 register ranges(address and length) +- interrupts : framebuffer controller interrupt +- display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. +- default-mode: a videomode within the display with timing parameters + as specified below. + +Example: + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + +VIA VT8500 Display +----------------------------------------------------- +Required properties (as per of_videomode_helper): + + - hactive, vactive: Display resolution + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters + in pixels + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in + lines + - clock: displayclock in Hz + - bpp: lcd panel bit-depth. + <16> for RGB565, <32> for RGB888 + +Optional properties (as per of_videomode_helper): + - width-mm, height-mm: Display dimensions in mm + - hsync-active-high (bool): Hsync pulse is active high + - vsync-active-high (bool): Vsync pulse is active high + - interlaced (bool): This is an interlaced mode + - doublescan (bool): This is a doublescan mode + +Example: + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt new file mode 100644 index 00000000000..a850fa011f0 --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia Graphics Engine Controller +----------------------------------------------------- + +Required properties: +- compatible : "wm,prizm-ge-rops" +- reg : Should contain 1 register ranges(address and length) + +Example: + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt new file mode 100644 index 00000000000..3d325e1d11e --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt @@ -0,0 +1,23 @@ +Wondermedia WM8505 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "wm,wm8505-fb" +- reg : Should contain 1 register ranges(address and length) +- via,display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. See definition in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt +- default-mode: a videomode node as specified in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt + +Example: + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt new file mode 100644 index 00000000000..6e09c35d9f1 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -0,0 +1,22 @@ +w1-gpio devicetree bindings + +Required properties: + + - compatible: "w1-gpio" + - gpios: one or two GPIO specs: + - the first one is used as data I/O pin + - the second one is optional. If specified, it is used as + enable pin for an external pin pullup. + +Optional properties: + + - linux,open-drain: if specified, the data pin is considered in + open-drain mode. + +Examples: + + onewire@0 { + compatible = "w1-gpio"; + gpios = <&gpio 126 0>, <&gpio 105 0>; + }; + |