summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/lpc32xx-mic.txt38
-rw-r--r--Documentation/devicetree/bindings/arm/lpc32xx.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/mrvl/intc.txt40
-rw-r--r--Documentation/devicetree/bindings/arm/mrvl/mrvl.txt (renamed from Documentation/devicetree/bindings/arm/mrvl.txt)8
-rw-r--r--Documentation/devicetree/bindings/arm/mrvl/timer.txt13
-rw-r--r--Documentation/devicetree/bindings/arm/spear.txt18
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-nmk.txt31
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.txt18
-rw-r--r--Documentation/devicetree/bindings/i2c/mrvl-i2c.txt15
-rw-r--r--Documentation/devicetree/bindings/i2c/pnx.txt36
-rw-r--r--Documentation/devicetree/bindings/net/lpc-eth.txt24
11 files changed, 234 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
new file mode 100644
index 00000000000..539adca19e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
@@ -0,0 +1,38 @@
+* NXP LPC32xx Main Interrupt Controller
+ (MIC, including SIC1 and SIC2 secondary controllers)
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-mic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: Empty for the interrupt controller itself
+- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
+ The first cell is the IRQ number
+ The second cell is used to specify mode:
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ Default for internal sources should be set to 4 (active high).
+- reg: Should contain MIC registers location and length
+
+Examples:
+ /*
+ * MIC
+ */
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ interrupt-controller;
+ interrupt-parent;
+ #interrupt-cells = <2>;
+ reg = <0x40008000 0xC000>;
+ };
+
+ /*
+ * ADC
+ */
+ adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt
new file mode 100644
index 00000000000..56ec8ddc4a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt
@@ -0,0 +1,8 @@
+NXP LPC32xx Platforms Device Tree Bindings
+------------------------------------------
+
+Boards with the NXP LPC32xx SoC shall have the following properties:
+
+Required root node property:
+
+compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250"
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
new file mode 100644
index 00000000000..80b9a94d9a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -0,0 +1,40 @@
+* Marvell MMP Interrupt controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
+ "mrvl,mmp2-mux-intc"
+- reg : Address and length of the register set of the interrupt controller.
+ If the interrupt controller is intc, address and length means the range
+ of the whold interrupt controller. If the interrupt controller is mux-intc,
+ address and length means one register. Since address of mux-intc is in the
+ range of intc. mux-intc is secondary interrupt controller.
+- reg-names : Name of the register set of the interrupt controller. It's
+ only required in mux-intc interrupt controller.
+- interrupts : Should be the port interrupt shared by mux interrupts. It's
+ only required in mux-intc interrupt controller.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source.
+- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
+ controller.
+- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
+ detection first.
+
+Example:
+ intc: interrupt-controller@d4282000 {
+ compatible = "mrvl,mmp2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ intcmux4@d4282150 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x150 0x4>, <0x168 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
index d8de933e9d8..117d741a2e4 100644
--- a/Documentation/devicetree/bindings/arm/mrvl.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
@@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings
PXA168 Aspenite Board
Required root node properties:
- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+PXA910 DKB Board
+Required root node properties:
+ - compatible = "mrvl,pxa910-dkb";
+
+MMP2 Brownstone Board
+Required root node properties:
+ - compatible = "mrvl,mmp2-brownstone";
diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
new file mode 100644
index 00000000000..9a6e251462e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
@@ -0,0 +1,13 @@
+* Marvell MMP Timer controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-timer".
+- reg : Address and length of the register set of timer controller.
+- interrupts : Should be the interrupt number.
+
+Example:
+ timer0: timer@d4014000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <13>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index f8e54f09232..aa5f355cc94 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
Required root node property:
compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
new file mode 100644
index 00000000000..ee87467ad8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
@@ -0,0 +1,31 @@
+Nomadik GPIO controller
+
+Required properties:
+- compatible : Should be "st,nomadik-gpio".
+- reg : Physical base address and length of the controller's registers.
+- interrupts : The interrupt outputs from the controller.
+- #gpio-cells : Should be two:
+ The first cell is the pin number.
+ The second cell is used to specify optional parameters:
+ - bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller : Marks the device node as an interrupt controller.
+- gpio-bank : Specifies which bank a controller owns.
+- st,supports-sleepmode : Specifies whether controller can sleep or not
+
+Example:
+
+ gpio1: gpio@8012e080 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <0 120 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ supports-sleepmode;
+ gpio-bank = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 1e34cfe5ebe..05428f39d9a 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -3,19 +3,25 @@
Required properties:
- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins, if
-- interrupt-name : Should be the name of irq resource.
- one number.
+- interrupts : Should be the port interrupt shared by all gpio pins.
+ There're three gpio interrupts in arch-pxa, and they're gpio0,
+ gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
+ gpio_mux.
+- interrupt-name : Should be the name of irq resource. Each interrupt
+ binds its interrupt-name.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be one. It is the pin number.
Example:
gpio: gpio@d4019000 {
- compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+ compatible = "mrvl,mmp-gpio";
reg = <0xd4019000 0x1000>;
- interrupts = <49>, <17>, <18>;
- interrupt-name = "gpio_mux", "gpio0", "gpio1";
+ interrupts = <49>;
+ interrupt-name = "gpio_mux";
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index 071eb3caae9..b891ee21835 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -3,34 +3,31 @@
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+ - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
as shown in the example below.
Recommended properties :
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
+ - interrupts : the interrupt number
- interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
+ services interrupts for this device. If the parent is the default
+ interrupt controller in device tree, it could be ignored.
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
status register of i2c controller instead.
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
Examples:
twsi1: i2c@d4011000 {
- compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
mrvl,i2c-fast-mode;
};
twsi2: i2c@d4025000 {
- compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
};
diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt
new file mode 100644
index 00000000000..fe98ada33ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/pnx.txt
@@ -0,0 +1,36 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+ i2c1: i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <51 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@400a8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a8000 0x100>;
+ interrupt-parent = <&mic>;
+ interrupts = <50 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt
new file mode 100644
index 00000000000..585021acd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -0,0 +1,24 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: String, operation mode of the PHY interface.
+ Supported values are: "mii", "rmii" (default)
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+ mac: ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <29 0>;
+
+ phy-mode = "rmii";
+ use-iram;
+ };