2 files changed, 118 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index d5176882d8b..a61727f9a6d 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,7 +1,7 @@
 Binding for TI/National Semiconductor LP55xx Led Drivers
 
 Required properties:
-- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562"
+- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501"
 - reg: I2C slave address
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
@@ -11,6 +11,11 @@ Each child has own specific current settings
 
 Optional properties:
 - label: Used for naming LEDs
+- pwr-sel: LP8501 specific property. Power selection for output channels.
+         0: D1~9 are connected to VDD
+         1: D1~6 with VDD, D7~9 with VOUT
+         2: D1~6 with VOUT, D7~9 with VDD
+         3: D1~9 are connected to VOUT
 
 Alternatively, each child can have specific channel name
 - chan-name: Name of each channel name
@@ -145,3 +150,68 @@ lp5562@30 {
 		max-cur = /bits/ 8 <0x60>;
 	};
 };
+
+example 4) LP8501
+9 channels are defined. The 'pwr-sel' is LP8501 specific property.
+Others are same as LP5523.
+
+lp8501@32 {
+	compatible = "ti,lp8501";
+	reg = <0x32>;
+	clock-mode = /bits/ 8 <2>;
+	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+	chan0 {
+		chan-name = "d1";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan1 {
+		chan-name = "d2";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan2 {
+		chan-name = "d3";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan3 {
+		chan-name = "d4";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan4 {
+		chan-name = "d5";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan5 {
+		chan-name = "d6";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan6 {
+		chan-name = "d7";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan7 {
+		chan-name = "d8";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan8 {
+		chan-name = "d9";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
new file mode 100644
index 00000000000..aece3eac1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -0,0 +1,47 @@
+LEDs connected to pca9632, pca9633 or pca9634
+
+Required properties:
+- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634"
+
+Optional properties:
+- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain
+- nxp,hw-blink : use hardware blinking instead of software blinking
+
+Each led is represented as a sub-node of the nxp,pca963x device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 3  in pca9632 or pca9633
+		or 0 to 7 in pca9634)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9632: pca9632 {
+	compatible = "nxp,pca9632";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x62>;
+
+	red@0 {
+		label = "red";
+		reg = <0>;
+		linux,default-trigger = "none";
+	};
+	green@1 {
+		label = "green";
+		reg = <1>;
+		linux,default-trigger = "none";
+	};
+	blue@2 {
+		label = "blue";
+		reg = <2>;
+		linux,default-trigger = "none";
+	};
+	unused@3 {
+		label = "unused";
+		reg = <3>;
+		linux,default-trigger = "none";
+	};
+};