diff options
Diffstat (limited to 'Documentation/devicetree')
146 files changed, 3823 insertions, 365 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 5fac246a953..3509707f932 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -14,6 +14,9 @@ Required nodes: - core-module: the root node to the Integrator platforms must have a core-module with regs and the compatible string "arm,core-module-integrator" +- external-bus-interface: the root node to the Integrator platforms + must have an external bus interface with regs and the + compatible-string "arm,external-bus-interface" Required properties for the core module: - regs: the location and size of the core module registers, one @@ -48,6 +51,11 @@ Required nodes: reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index ad031211b5b..2742e9cfd6b 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" + <chip> can be "at91rm9200" or "sama5d3" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 1196290082d..16f60b41c14 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -20,6 +20,10 @@ TC/TCLIB Timer required properties: - interrupts: Should contain all interrupts for the TC block Note that you can specify several interrupt cells if the TC block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. Examples: @@ -28,6 +32,8 @@ One interrupt per TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 4>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; One interrupt per TC channel in a TC block: @@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; interrupts = <26 4 27 4 28 4>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; }; RSTC Reset Controller required properties: @@ -50,7 +58,8 @@ Example: }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91sam9260-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", + "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", - reg: Should contain registers location and length For at91sam9263 and at91sam9g45 you must specify 2 entries. diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt new file mode 100644 index 00000000000..780d0392a66 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt @@ -0,0 +1,20 @@ +Trusted Foundations +------------------- + +Boards that use the Trusted Foundations secure monitor can signal its +presence by declaring a node compatible with "tlm,trusted-foundations" +under the /firmware/ node + +Required properties: +- compatible: "tlm,trusted-foundations" +- tlm,version-major: major version number of Trusted Foundations firmware +- tlm,version-minor: minor version number of Trusted Foundations firmware + +Example: + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt new file mode 100644 index 00000000000..8c7a4653508 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -0,0 +1,32 @@ +Hisilicon Platforms Device Tree Bindings +---------------------------------------------------- + +Hi4511 Board +Required root node properties: + - compatible = "hisilicon,hi3620-hi4511"; + +Hisilicon system controller + +Required properties: +- compatible : "hisilicon,sysctrl" +- reg : Register address and size + +Optional properties: +- smp-offset : offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go +- resume-offset : offset in sysctrl for notifying cpu0 when resume +- reboot-offset : offset in sysctrl for system reboot + +Example: + + /* for Hi3620 */ + sysctrl: system-controller@fc802000 { + compatible = "hisilicon,sysctrl"; + reg = <0xfc802000 0x1000>; + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index c0c7626fd0f..b513cb8196f 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -7,20 +7,21 @@ The ARM L2 cache representation in the device tree should be done as follows: Required properties: - compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "marvell,aurora-system-cache": Marvell Controller designed to be + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" + "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller + "marvell,aurora-system-cache": Marvell Controller designed to be compatible with the ARM one, with system cache mode (meaning maintenance operations on L1 are broadcasted to the L2 and L2 performs the same operation). - "marvell,"aurora-outer-cache: Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by - "brcm,bcm11351-a2-pl310-cache" + "marvell,aurora-outer-cache": Marvell Controller designed to be + compatible with the ARM one with outer cache mode. + "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible + with arm,pl310-cache controller. - cache-unified : Specifies the cache is a unified cache. - cache-level : Should be set to 2 for a level 2 cache. - reg : Physical base address and size of cache controller's memory mapped diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt new file mode 100644 index 00000000000..737afa5f814 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -0,0 +1,24 @@ +Marvell Berlin SoC Family Device Tree Bindings +--------------------------------------------------------------- + +Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 +shall have the following properties: + +* Required root node properties: +compatible: must contain "marvell,berlin" + +In addition, the above compatible shall be extended with the specific +SoC and board used. Currently known SoC compatibles are: + "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), + "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) + "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) + "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) + +* Example: + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; + + ... +} diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 00000000000..11087edb065 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt index 1a5a42ce21b..83f405bde13 100644 --- a/Documentation/devicetree/bindings/arm/omap/mpu.txt +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM. Required properties: - compatible : Should be "ti,omap3-mpu" for OMAP3 Should be "ti,omap4-mpu" for OMAP4 + Should be "ti,omap5-mpu" for OMAP5 - ti,hwmods: "mpu" Examples: +- For an OMAP5 SMP system: + +mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu" +}; + - For an OMAP4 SMP system: mpu { diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 808c1543b0f..34dc40cffdf 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -31,6 +31,59 @@ spinlock@1 { ti,hwmods = "spinlock"; }; +SoC Type (optional): + +- General Purpose devices + compatible = "ti,gp" +- High Security devices + compatible = "ti,hs" + +SoC Families: + +- OMAP2 generic - defaults to OMAP2420 + compatible = "ti,omap2" +- OMAP3 generic - defaults to OMAP3430 + compatible = "ti,omap3" +- OMAP4 generic - defaults to OMAP4430 + compatible = "ti,omap4" +- OMAP5 generic - defaults to OMAP5430 + compatible = "ti,omap5" +- DRA7 generic - defaults to DRA742 + compatible = "ti,dra7" +- AM43x generic - defaults to AM4372 + compatible = "ti,am43" + +SoCs: + +- OMAP2420 + compatible = "ti,omap2420", "ti,omap2" +- OMAP2430 + compatible = "ti,omap2430", "ti,omap2" + +- OMAP3430 + compatible = "ti,omap3430", "ti,omap3" +- AM3517 + compatible = "ti,am3517", "ti,omap3" +- OMAP3630 + compatible = "ti,omap36xx", "ti,omap3" +- AM33xx + compatible = "ti,am33xx", "ti,omap3" + +- OMAP4430 + compatible = "ti,omap4430", "ti,omap4" +- OMAP4460 + compatible = "ti,omap4460", "ti,omap4" + +- OMAP5430 + compatible = "ti,omap5430", "ti,omap5" +- OMAP5432 + compatible = "ti,omap5432", "ti,omap5" + +- DRA742 + compatible = "ti,dra7xx", "ti,dra7" + +- AM4372 + compatible = "ti,am4372", "ti,am43" Boards: diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 343781b9f24..3e1e498fea9 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,6 +7,7 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,armv8-pmuv3" "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 47ada1dff21..5d49f2b37f6 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -49,7 +49,7 @@ adc@12D10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { compatible = "ntc,ncp15wb473"; - pullup-uV = <1800000>; + pullup-uv = <1800000>; pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 5039c0a12f5..0ab3251a6ec 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,7 +1,12 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - name : should be 'sysreg'; - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; - reg : offset and length of the register set. + +Example: + syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index ed9c8533443..558ed4b4ef3 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -32,3 +32,8 @@ board-specific compatible values: nvidia,whistler toradex,colibri_t20-512 toradex,iris + +Trusted Foundations +------------------------------------------- +Tegra supports the Trusted Foundation secure monitor. See the +"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 1608a54e90e..68ac65f82a1 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -9,6 +9,7 @@ Required properties: - compatible : Should contain "nvidia,tegra<chip>-pmc". - reg : Offset and length of the register set for the device - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: "pclk" (The Tegra clock of that name), "clk32k_in" (The 32KHz clock input to Tegra). diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt index 9989eda755d..c9cf605bb99 100644 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -29,3 +29,8 @@ pic: pic@14000000 { clear-mask = <0xffffffff>; valid-mask = <0x003fffff>; }; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt index b5cdd20cde9..1c8351604d3 100644 --- a/Documentation/devicetree/bindings/ata/marvell.txt +++ b/Documentation/devicetree/bindings/ata/marvell.txt @@ -1,7 +1,7 @@ * Marvell Orion SATA Required Properties: -- compatibility : "marvell,orion-sata" +- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata" - reg : Address range of controller - interrupts : Interrupt controller is using - nr-ports : Number of SATA ports in use. diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt new file mode 100644 index 00000000000..1e6111333fa --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -0,0 +1,18 @@ +* Renesas R-Car SATA + +Required properties: +- compatible : should contain one of the following: + - "renesas,sata-r8a7779" for R-Car H1 + - "renesas,sata-r8a7790" for R-Car H2 + - "renesas,sata-r8a7791" for R-Car M2 +- reg : address and length of the SATA registers; +- interrupts : must consist of one interrupt specifier. + +Example: + +sata: sata@fc600000 { + compatible = "renesas,sata-r8a7779"; + reg = <0xfc600000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt new file mode 100644 index 00000000000..cd5e2391288 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -0,0 +1,339 @@ +Device Tree Clock bindings for arch-at91 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "atmel,at91rm9200-pmc" or + "atmel,at91sam9g45-pmc" or + "atmel,at91sam9n12-pmc" or + "atmel,at91sam9x5-pmc" or + "atmel,sama5d3-pmc": + at91 PMC (Power Management Controller) + All at91 specific clocks (clocks defined below) must be child + node of the PMC node. + + "atmel,at91rm9200-clk-main": + at91 main oscillator + + "atmel,at91rm9200-clk-master" or + "atmel,at91sam9x5-clk-master": + at91 master clock + + "atmel,at91sam9x5-clk-peripheral" or + "atmel,at91rm9200-clk-peripheral": + at91 peripheral clocks + + "atmel,at91rm9200-clk-pll" or + "atmel,at91sam9g45-clk-pll" or + "atmel,at91sam9g20-clk-pllb" or + "atmel,sama5d3-clk-pll": + at91 pll clocks + + "atmel,at91sam9x5-clk-plldiv": + at91 plla divisor + + "atmel,at91rm9200-clk-programmable" or + "atmel,at91sam9g45-clk-programmable" or + "atmel,at91sam9x5-clk-programmable": + at91 programmable clocks + + "atmel,at91sam9x5-clk-smd": + at91 SMD (Soft Modem) clock + + "atmel,at91rm9200-clk-system": + at91 system clocks + + "atmel,at91rm9200-clk-usb" or + "atmel,at91sam9x5-clk-usb" or + "atmel,at91sam9n12-clk-usb": + at91 usb clock + + "atmel,at91sam9x5-clk-utmi": + at91 utmi clock + +Required properties for PMC node: +- reg : defines the IO memory reserved for the PMC. +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- interrupts : shall be set to PMC interrupt line. +- interrupt-controller : tell that the PMC is an interrupt controller. +- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, + and reflect the bit position in the PMC_ER/DR/SR registers. + You can use the dt macros defined in dt-bindings/clk/at91.h. + 0 (AT91_PMC_MOSCS) -> main oscillator ready + 1 (AT91_PMC_LOCKA) -> PLL A ready + 2 (AT91_PMC_LOCKB) -> PLL B ready + 3 (AT91_PMC_MCKRDY) -> master clock ready + 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready + 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready + 16 (AT91_PMC_MOSCSELS) -> main oscillator selected + 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized + 18 (AT91_PMC_CFDEV) -> clock failure detected + +For example: + pmc: pmc@fffffc00 { + compatible = "atmel,sama5d3-pmc"; + interrupts = <1 4 7>; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #address-cells = <1>; + + /* put at91 clocks here */ + }; + +Required properties for main clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<0>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks (optional if clock-frequency is provided) : shall be the slow clock + phandle. This clock is used to calculate the main clock rate if + "clock-frequency" is not provided. +- clock-frequency : the main oscillator frequency.Prefer the use of + "clock-frequency" over automatic clock rate calculation. + +For example: + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + interrupt-parent = <&pmc>; + interrupts = <0>; + #clock-cells = <0>; + clocks = <&ck32k>; + clock-frequency = <18432000>; + }; + +Required properties for master clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<3>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the master clock sources (see atmel datasheet) phandles. + e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>". +- atmel,clk-output-range : minimum and maximum clock frequency (two u32 + fields). + e.g. output = <0 133000000>; <=> 0 to 133MHz. +- atmel,clk-divisors : master clock divisors table (four u32 fields). + 0 <=> reserved value. + e.g. divisors = <1 2 4 6>; +- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the + PRES field as CLOCK_DIV3 (e.g sam9x5). + +For example: + mck: mck { + compatible = "atmel,at91rm9200-clk-master"; + interrupt-parent = <&pmc>; + interrupts = <3>; + #clock-cells = <0>; + atmel,clk-output-range = <0 133000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + +Required properties for peripheral clocks: +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- clocks : shall be the master clock phandle. + e.g. clocks = <&mck>; +- name: device tree node describing a specific system clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg: peripheral id. See Atmel's datasheets to get a full + list of peripheral ids. + * atmel,clk-output-range : minimum and maximum clock frequency + (two u32 fields). Only valid on at91sam9x5-clk-peripheral + compatible IPs. + +For example: + periph: periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #size-cells = <0>; + #address-cells = <1>; + clocks = <&mck>; + + ssc0_clk { + #clock-cells = <0>; + reg = <2>; + atmel,clk-output-range = <0 133000000>; + }; + + usart0_clk { + #clock-cells = <0>; + reg = <3>; + atmel,clk-output-range = <0 66000000>; + }; + }; + + +Required properties for pll clocks: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<1>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the main clock phandle. +- reg : pll id. + 0 -> PLL A + 1 -> PLL B +- atmel,clk-input-range : minimum and maximum source clock frequency (two u32 + fields). + e.g. input = <1 32000000>; <=> 1 to 32MHz. +- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output + range description. Sould be set to 2, 3 + or 4. + * 1st and 2nd cells represent the frequency range (min-max). + * 3rd cell is optional and represents the OUT field value for the given + range. + * 4th cell is optional and represents the ICPLL field (PLLICPR + register) +- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter + depending on #atmel,pll-output-range-cells + property value. + +For example: + plla: pllack { + compatible = "atmel,at91sam9g45-clk-pll"; + interrupt-parent = <&pmc>; + interrupts = <1>; + #clock-cells = <0>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <74500000 800000000 0 0 + 69500000 750000000 1 0 + 64500000 700000000 2 0 + 59500000 650000000 3 0 + 54500000 600000000 0 1 + 49500000 550000000 1 1 + 44500000 500000000 2 1 + 40000000 450000000 3 1>; + }; + +Required properties for plldiv clocks (plldiv = pll / 2): +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the plla clock phandle. + +The pll divisor is equal to 2 and cannot be changed. + +For example: + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + +Required properties for programmable clocks: +- interrupt-parent : must reference the PMC node. +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- clocks : shall be the programmable clock source phandles. + e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; +- name: device tree node describing a specific prog clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg : programmable clock id (register offset from PCKx + register). + * interrupts : shall be set to "<(8 + id)>". + +For example: + prog: progck { + compatible = "atmel,at91sam9g45-clk-programmable"; + #size-cells = <0>; + #address-cells = <1>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <8>; + }; + + prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <9>; + }; + }; + + +Required properties for smd clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the smd clock source phandles. + e.g. clocks = <&plladiv>, <&utmi>; + +For example: + smd: smdck { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + +Required properties for system clocks: +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- name: device tree node describing a specific system clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg: system clock id (bit position in SCER/SCDR/SCSR registers). + See Atmel's datasheet to get a full list of system clock ids. + +For example: + system: systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + }; + + +Required properties for usb clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the smd clock source phandles. + e.g. clocks = <&pllb>; +- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"): + usb clock divisor table. + e.g. divisors = <1 2 4 0>; + +For example: + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + atmel,clk-divisors = <1 2 4 0>; + }; + + +Required properties for utmi clock: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall be the main clock source phandle. + +For example: + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <0>; + clocks = <&main>; + }; diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 75e2e1999f8..180e8835569 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -8,12 +8,29 @@ Required Properties: - compatible: should be one of the following: - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. - - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs. - + - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250 + SoCs. + - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420 + SoCs. - reg: physical base address and length of the controller's register set. - #clock-cells: should be 1. +- clocks: + - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" + is used if not specified. + - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" + is used if not specified. + - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if + not specified. + - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not + specified. + +- clock-names: Aliases for the above clocks. They should be "pll_ref", + "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular @@ -34,16 +51,30 @@ i2s_bus 6 sclk_i2s 7 pcm_bus 8 sclk_pcm 9 +adma 10 Exynos5420 + +Example 1: An example of a clock controller node using the default input + clock names is listed below. + +clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; +}; -Example 1: An example of a clock controller node is listed below. +Example 2: An example of a clock controller node with the input clocks + specified. clock_audss: audss-clock-controller@3810000 { compatible = "samsung,exynos5250-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, + <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; }; -Example 2: I2S controller node that consumes the clock generated by the clock +Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt new file mode 100644 index 00000000000..60bbb1a8c69 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt @@ -0,0 +1,98 @@ +Device tree Clock bindings for Renesas EMMA Mobile EV2 + +This binding uses the common clock binding. + +* SMU +System Management Unit described in user's manual R19UH0037EJ1000_SMU. +This is not a clock provider, but clocks under SMU depend on it. + +Required properties: +- compatible: Should be "renesas,emev2-smu" +- reg: Address and Size of SMU registers + +* SMU_CLKDIV +Function block with an input mux and a divider, which corresponds to +"Serial clock generator" in fig."Clock System Overview" of the manual, +and "xxx frequency division setting register" (XXXCLKDIV) registers. +This makes internal (neither input nor output) clock that is provided +to input of xxxGCLK block. + +Required properties: +- compatible: Should be "renesas,emev2-smu-clkdiv" +- reg: Byte offset from SMU base and Bit position in the register +- clocks: Parent clocks. Input clocks as described in clock-bindings.txt +- #clock-cells: Should be <0> + +* SMU_GCLK +Clock gating node shown as "Clock stop processing block" in the +fig."Clock System Overview" of the manual. +Registers are "xxx clock gate control register" (XXXGCLKCTRL). + +Required properties: +- compatible: Should be "renesas,emev2-smu-gclk" +- reg: Byte offset from SMU base and Bit position in the register +- clocks: Input clock as described in clock-bindings.txt +- #clock-cells: Should be <0> + +Example of provider: + +usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>; + #clock-cells = <0>; +}; + +usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; +}; + +Example of consumer: + +uart@e1020000 { + compatible = "renesas,em-uart"; + reg = <0xe1020000 0x38>; + interrupts = <0 8 0>; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; +}; + +Example of clock-tree description: + + This describes a clock path in the clock tree + c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk + +smu@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index c6bf8a6c8f5..a2ac2d9ac71 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -6,7 +6,7 @@ SoC's in the Exynos4 family. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 24765c146e3..72ce617dea8 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - reg: physical base address of the controller and length of memory mapped @@ -62,6 +62,7 @@ clock which they consume. div_i2s1 157 div_i2s2 158 sclk_hdmiphy 159 + div_pcm0 160 [Peripheral Clock Gates] @@ -159,6 +160,8 @@ clock which they consume. mixer 343 hdmi 344 g2d 345 + mdma0 346 + smmu_mdma0 347 [Clock Muxes] diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index 32aa34ecad3..458f34789e5 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC. Required Properties: -- comptible: should be one of the following. +- compatible: should be one of the following. - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - reg: physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 4499e9966bc..9955dc9c7d9 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC. Required Properties: -- comptible: should be "samsung,exynos5440-clock". +- compatible: should be "samsung,exynos5440-clock". - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt index 0b1fe782409..48ea0ad8ad4 100644 --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt @@ -10,6 +10,8 @@ Required properties: - clock-frequency : frequency of clock in Hz. Should be a single cell. Optional properties: +- clock-accuracy : accuracy of clock in ppb (parts per billion). + Should be a single cell. - gpios : From common gpio binding; gpio connection to clock enable pin. - clock-output-names : From common clock binding. @@ -18,4 +20,5 @@ Example: compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000000>; + clock-accuracy = <100>; }; diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt index 5757f9abfc2..1bae8527eb9 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt @@ -19,6 +19,6 @@ Example: compatible = "fixed-factor-clock"; clocks = <&parentclk>; #clock-cells = <0>; - div = <2>; - mult = <1>; + clock-div = <2>; + clock-mult = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt new file mode 100644 index 00000000000..4b71ab41be5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt @@ -0,0 +1,19 @@ +* Hisilicon Hi3620 Clock Controller + +The Hi3620 clock controller generates and supplies clock to various +controllers within the Hi3620 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt new file mode 100644 index 00000000000..a70356452a8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt @@ -0,0 +1,113 @@ +* Clock bindings for Freescale i.MX35 + +Required properties: +- compatible: Should be "fsl,imx35-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX35 +clocks and IDs. + + Clock ID + --------------------------- + ckih 0 + mpll 1 + ppll 2 + mpll_075 3 + arm 4 + hsp 5 + hsp_div 6 + hsp_sel 7 + ahb 8 + ipg 9 + arm_per_div 10 + ahb_per_div 11 + ipg_per 12 + uart_sel 13 + uart_div 14 + esdhc_sel 15 + esdhc1_div 16 + esdhc2_div 17 + esdhc3_div 18 + spdif_sel 19 + spdif_div_pre 20 + spdif_div_post 21 + ssi_sel 22 + ssi1_div_pre 23 + ssi1_div_post 24 + ssi2_div_pre 25 + ssi2_div_post 26 + usb_sel 27 + usb_div 28 + nfc_div 29 + asrc_gate 30 + pata_gate 31 + audmux_gate 32 + can1_gate 33 + can2_gate 34 + cspi1_gate 35 + cspi2_gate 36 + ect_gate 37 + edio_gate 38 + emi_gate 39 + epit1_gate 40 + epit2_gate 41 + esai_gate 42 + esdhc1_gate 43 + esdhc2_gate 44 + esdhc3_gate 45 + fec_gate 46 + gpio1_gate 47 + gpio2_gate 48 + gpio3_gate 49 + gpt_gate 50 + i2c1_gate 51 + i2c2_gate 52 + i2c3_gate 53 + iomuxc_gate 54 + ipu_gate 55 + kpp_gate 56 + mlb_gate 57 + mshc_gate 58 + owire_gate 59 + pwm_gate 60 + rngc_gate 61 + rtc_gate 62 + rtic_gate 63 + scc_gate 64 + sdma_gate 65 + spba_gate 66 + spdif_gate 67 + ssi1_gate 68 + ssi2_gate 69 + uart1_gate 70 + uart2_gate 71 + uart3_gate 72 + usbotg_gate 73 + wdog_gate 74 + max_gate 75 + admux_gate 76 + csi_gate 77 + csi_div 78 + csi_sel 79 + iim_gate 80 + gpu2d_gate 81 + +Examples: + +clks: ccm@53f80000 { + compatible = "fsl,imx35-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; +}; + +esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx35-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <7>; + clocks = <&clks 9>, <&clks 8>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index 4c029a8739d..cadc4d29ada 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -7,197 +7,8 @@ Required properties: - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX5 -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - ckil 1 - osc 2 - ckih1 3 - ckih2 4 - ahb 5 - ipg 6 - axi_a 7 - axi_b 8 - uart_pred 9 - uart_root 10 - esdhc_a_pred 11 - esdhc_b_pred 12 - esdhc_c_s 13 - esdhc_d_s 14 - emi_sel 15 - emi_slow_podf 16 - nfc_podf 17 - ecspi_pred 18 - ecspi_podf 19 - usboh3_pred 20 - usboh3_podf 21 - usb_phy_pred 22 - usb_phy_podf 23 - cpu_podf 24 - di_pred 25 - tve_s 27 - uart1_ipg_gate 28 - uart1_per_gate 29 - uart2_ipg_gate 30 - uart2_per_gate 31 - uart3_ipg_gate 32 - uart3_per_gate 33 - i2c1_gate 34 - i2c2_gate 35 - gpt_ipg_gate 36 - pwm1_ipg_gate 37 - pwm1_hf_gate 38 - pwm2_ipg_gate 39 - pwm2_hf_gate 40 - gpt_hf_gate 41 - fec_gate 42 - usboh3_per_gate 43 - esdhc1_ipg_gate 44 - esdhc2_ipg_gate 45 - esdhc3_ipg_gate 46 - esdhc4_ipg_gate 47 - ssi1_ipg_gate 48 - ssi2_ipg_gate 49 - ssi3_ipg_gate 50 - ecspi1_ipg_gate 51 - ecspi1_per_gate 52 - ecspi2_ipg_gate 53 - ecspi2_per_gate 54 - cspi_ipg_gate 55 - sdma_gate 56 - emi_slow_gate 57 - ipu_s 58 - ipu_gate 59 - nfc_gate 60 - ipu_di1_gate 61 - vpu_s 62 - vpu_gate 63 - vpu_reference_gate 64 - uart4_ipg_gate 65 - uart4_per_gate 66 - uart5_ipg_gate 67 - uart5_per_gate 68 - tve_gate 69 - tve_pred 70 - esdhc1_per_gate 71 - esdhc2_per_gate 72 - esdhc3_per_gate 73 - esdhc4_per_gate 74 - usb_phy_gate 75 - hsi2c_gate 76 - mipi_hsc1_gate 77 - mipi_hsc2_gate 78 - mipi_esc_gate 79 - mipi_hsp_gate 80 - ldb_di1_div_3_5 81 - ldb_di1_div 82 - ldb_di0_div_3_5 83 - ldb_di0_div 84 - ldb_di1_gate 85 - can2_serial_gate 86 - can2_ipg_gate 87 - i2c3_gate 88 - lp_apm 89 - periph_apm 90 - main_bus 91 - ahb_max 92 - aips_tz1 93 - aips_tz2 94 - tmax1 95 - tmax2 96 - tmax3 97 - spba 98 - uart_sel 99 - esdhc_a_sel 100 - esdhc_b_sel 101 - esdhc_a_podf 102 - esdhc_b_podf 103 - ecspi_sel 104 - usboh3_sel 105 - usb_phy_sel 106 - iim_gate 107 - usboh3_gate 108 - emi_fast_gate 109 - ipu_di0_gate 110 - gpc_dvfs 111 - pll1_sw 112 - pll2_sw 113 - pll3_sw 114 - ipu_di0_sel 115 - ipu_di1_sel 116 - tve_ext_sel 117 - mx51_mipi 118 - pll4_sw 119 - ldb_di1_sel 120 - di_pll4_podf 121 - ldb_di0_sel 122 - ldb_di0_gate 123 - usb_phy1_gate 124 - usb_phy2_gate 125 - per_lp_apm 126 - per_pred1 127 - per_pred2 128 - per_podf 129 - per_root 130 - ssi_apm 131 - ssi1_root_sel 132 - ssi2_root_sel 133 - ssi3_root_sel 134 - ssi_ext1_sel 135 - ssi_ext2_sel 136 - ssi_ext1_com_sel 137 - ssi_ext2_com_sel 138 - ssi1_root_pred 139 - ssi1_root_podf 140 - ssi2_root_pred 141 - ssi2_root_podf 142 - ssi_ext1_pred 143 - ssi_ext1_podf 144 - ssi_ext2_pred 145 - ssi_ext2_podf 146 - ssi1_root_gate 147 - ssi2_root_gate 148 - ssi3_root_gate 149 - ssi_ext1_gate 150 - ssi_ext2_gate 151 - epit1_ipg_gate 152 - epit1_hf_gate 153 - epit2_ipg_gate 154 - epit2_hf_gate 155 - can_sel 156 - can1_serial_gate 157 - can1_ipg_gate 158 - owire_gate 159 - gpu3d_s 160 - gpu2d_s 161 - gpu3d_gate 162 - gpu2d_gate 163 - garb_gate 164 - cko1_sel 165 - cko1_podf 166 - cko1 167 - cko2_sel 168 - cko2_podf 169 - cko2 170 - srtc_gate 171 - pata_gate 172 - sata_gate 173 - spdif_xtal_sel 174 - spdif0_sel 175 - spdif1_sel 176 - spdif0_pred 177 - spdif0_podf 178 - spdif1_pred 179 - spdif1_podf 180 - spdif0_com_sel 181 - spdif1_com_sel 182 - spdif0_gate 183 - spdif1_gate 184 - spdif_ipg_gate 185 - ocram 186 +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h +for the full list of i.MX5 clock IDs. Examples (for mx53): @@ -212,7 +23,7 @@ can1: can@53fc8000 { compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 12bd72605a3..225990f79b7 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -17,13 +17,14 @@ Required properties: - reg - pll control0 and pll multipler registers - reg-names : control and multiplier. The multiplier is applicable only for main pll clock -- fixed-postdiv : fixed post divider value +- fixed-postdiv : fixed post divider value. If absent, use clkod register bits + for postdiv Example: mainpllclk: mainpllclk@2310110 { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclksys>; reg = <0x02620350 4>, <0x02310110 4>; reg-names = "control", "multiplier"; fixed-postdiv = <2>; @@ -32,11 +33,10 @@ Example: papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkpass>; clock-output-names = "pa-pll-clk"; reg = <0x02620358 4>; reg-names = "control"; - fixed-postdiv = <6>; }; Required properties: diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt new file mode 100644 index 00000000000..96ce71bbd74 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -0,0 +1,38 @@ +Binding for Maxim MAX77686 32k clock generator block + +This is a part of device tree bindings of MAX77686 multi-function device. +More information can be found in bindings/mfd/max77686.txt file. + +The MAX77686 contains three 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. + +Following properties should be presend in main device node of the MFD chip. + +Required properties: +- #clock-cells: simple one-cell clock specifier format is used, where the + only cell is used as an index of the clock inside the provider. Following + indices are allowed: + - 0: 32khz_ap clock, + - 1: 32khz_cp clock, + - 2: 32khz_pmic clock. + +Example: Node of the MFD chip + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + +Example: Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77686 2>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt index 0c80c267710..9acea9d9316 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra114-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt new file mode 100644 index 00000000000..ded5d6212c8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -0,0 +1,63 @@ +NVIDIA Tegra124 Clock And Reset Controller + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CAR (Clock And Reset) Controller on Tegra is the HW module responsible +for muxing and gating Tegra's clocks, and setting their rates. + +Required properties : +- compatible : Should be "nvidia,tegra124-car" +- reg : Should contain CAR registers location and length +- clocks : Should contain phandle and clock specifiers for two clocks: + the 32 KHz "32k_in", and the board-specific oscillator "osc". +- #clock-cells : Should be 1. + In clock consumers, this cell represents the clock ID exposed by the + CAR. The assignments may be found in header file + <dt-bindings/clock/tegra124-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. + +Example SoC include file: + +/ { + tegra_car: clock { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + usb@c5004000 { + clocks = <&tegra_car TEGRA124_CLK_USB2>; + }; +}; + +Example board file: + +/ { + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + osc: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <112400000>; + }; + + clk_32k: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + &tegra_car { + clocks = <&clk_32k> <&osc>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index fcfed5bf73f..6c5901b503d 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra20-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra20-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt index 0f714081e98..63618cde12d 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt @@ -15,6 +15,9 @@ Required properties : In clock consumers, this cell represents the clock ID exposed by the CAR. The assignments may be found in header file <dt-bindings/clock/tegra30-car.h>. +- #reset-cells : Should be 1. + In clock consumers, this cell represents the bit number in the CAR's + array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. Example SoC include file: @@ -23,6 +26,7 @@ Example SoC include file: compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; usb@c5004000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt new file mode 100644 index 00000000000..767401f4287 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -0,0 +1,21 @@ +Qualcomm Global Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,gcc-msm8660" + "qcom,gcc-msm8960" + "qcom,gcc-msm8974" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + reg = <0x900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt new file mode 100644 index 00000000000..d572e9964c5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt @@ -0,0 +1,21 @@ +Qualcomm Multimedia Clock & Reset Controller Binding +---------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,mmcc-msm8660" + "qcom,mmcc-msm8960" + "qcom,mmcc-msm8974" + +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 +- #reset-cells : shall contain 1 + +Example: + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt new file mode 100644 index 00000000000..952e373178d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -0,0 +1,28 @@ +* Renesas CPG DIV6 Clock + +The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse +Generator (CPG). They clock input is divided by a configurable factor from 1 +to 64. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,cpg-div6-clock" for generic DIV6 clocks + - reg: Base address and length of the memory resource used by the DIV6 clock + - clocks: Reference to the parent clock + - #clock-cells: Must be 0 + - clock-output-names: The name of the clock as a free-form string + + +Example +------- + + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt new file mode 100644 index 00000000000..a6a352c2771 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -0,0 +1,51 @@ +* Renesas CPG Module Stop (MSTP) Clocks + +The CPG can gate SoC device clocks. The gates are organized in groups of up to +32 gates. + +This device tree binding describes a single 32 gate clocks group per node. +Clocks are referenced by user nodes by the MSTP node phandle and the clock +index in the group, from 0 to 31. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + - reg: Base address and length of the I/O mapped registers used by the MSTP + clocks. The first register is the clock control register and is mandatory. + The second register is the clock status register and is optional when not + implemented in hardware. + - clocks: Reference to the parent clocks, one per output clock. The parents + must appear in the same order as the output clocks. + - #clock-cells: Must be 1 + - clock-output-names: The name of the clocks as free-form strings + - renesas,indices: Indices of the gate clocks into the group (0 to 31) + +The clocks, clock-output-names and renesas,indices properties contain one +entry per gate clock. The MSTP groups are sparsely populated. Unimplemented +gate clocks must not be declared. + + +Example +------- + + #include <dt-bindings/clock/r8a7790-clock.h> + + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>; + #clock-cells = <1>; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0"; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 + >; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt new file mode 100644 index 00000000000..7b41c2fe54d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -0,0 +1,32 @@ +* Renesas R-Car Gen2 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs +and several fixed ratio dividers. + +Required Properties: + + - compatible: Must be one of + - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG + - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "main", + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z" + + +Example +------- + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0, "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", "z"; + }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt new file mode 100644 index 00000000000..c09f21e1d98 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt @@ -0,0 +1,39 @@ +Binding for Silicon Labs 570, 571, 598 and 599 programmable +I2C clock generators. + +Reference +This binding uses the common clock binding[1]. Details about the devices can be +found in the data sheets[2][3]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si570/571 Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf +[3] Si598/599 Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf + +Required properties: + - compatible: Shall be one of "silabs,si570", "silabs,si571", + "silabs,si598", "silabs,si599" + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + - factory-fout: Factory set default frequency. This frequency is part specific. + The correct frequency for the part used has to be provided in + order to generate the correct output frequencies. For more + details, please refer to the data sheet. + - temperature-stability: Temperature stability of the device in PPM. Should be + one of: 7, 20, 50 or 100. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si570". + - clock-frequency: Output frequency to generate. This defines the output + frequency set during boot. It can be reprogrammed during + runtime through the common clock framework. + +Example: + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + }; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 91a748fed13..c2cb7621ad2 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -7,8 +7,10 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be one of the following: "allwinner,sun4i-osc-clk" - for a gatable oscillator - "allwinner,sun4i-pll1-clk" - for the main PLL clock + "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 + "allwinner,sun4i-pll5-clk" - for the PLL5 clock + "allwinner,sun4i-pll6-clk" - for the PLL6 clock "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock "allwinner,sun4i-axi-clk" - for the AXI clock "allwinner,sun4i-axi-gates-clk" - for the AXI gates @@ -33,10 +35,14 @@ Required properties: "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 + "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks + "allwinner,sun7i-a20-out-clk" - for the external output clocks Required properties for all clocks: - reg : shall be the control register address for the clock. -- clocks : shall be the input parent clock(s) phandle for the clock +- clocks : shall be the input parent clock(s) phandle for the clock. For + multiplexed clocks, the list order must match the hardware + programming order. - #clock-cells : from common clock binding; shall be set to 0 except for "allwinner,*-gates-clk" where it shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index d99af878f5d..17b4a94916d 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -22,6 +22,10 @@ Required properties: Optional properties: - clocks : as described in the clock bindings - clock-names : as described in the clock bindings + - fclk-enable : Bit mask to enable FCLKs statically at boot time. + Bit [0..3] correspond to FCLK0..FCLK3. The corresponding + FCLK will only be enabled if it is actually running at + boot time. Clock inputs: The following strings are optional parameters to the 'clock-names' property in diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt new file mode 100644 index 00000000000..f2aab3dc2b5 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -0,0 +1,68 @@ +* Atmel HW cryptographic accelerators + +These are the HW cryptographic accelerators found on some Atmel products. + +* Advanced Encryption Standard (AES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-aes". +- reg: Should contain AES registers location and length. +- interrupts: Should contain the IRQ line for the AES. +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +aes@f8038000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf8038000 0x100>; + interrupts = <43 4 0>; + dmas = <&dma1 2 18>, + <&dma1 2 19>; + dma-names = "tx", "rx"; + +* Triple Data Encryption Standard (Triple DES) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-tdes". +- reg: Should contain TDES registers location and length. +- interrupts: Should contain the IRQ line for the TDES. + +Optional properties: +- dmas: List of two DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. + +Example: +tdes@f803c000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf803c000 0x100>; + interrupts = <44 4 0>; + dmas = <&dma1 2 20>, + <&dma1 2 21>; + dma-names = "tx", "rx"; +}; + +* Secure Hash Algorithm (SHA) + +Required properties: +- compatible : Should be "atmel,at91sam9g46-sha". +- reg: Should contain SHA registers location and length. +- interrupts: Should contain the IRQ line for the SHA. + +Optional properties: +- dmas: One DMA specifiers as described in + atmel-dma.txt and dma.txt files. +- dma-names: Contains one identifier string for each DMA specifier + in the dmas property. Only one "tx" string needed. + +Example: +sha@f8034000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf8034000 0x100>; + interrupts = <42 4 0>; + dmas = <&dma1 2 17>; + dma-names = "tx"; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt new file mode 100644 index 00000000000..6949e50f1f1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt @@ -0,0 +1,17 @@ +Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 . + +Required properties: +- compatible : Should be "fsl,<soc>-dcp" +- reg : Should contain MXS DCP registers location and length +- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but + is currently not implemented and not used. + +Example: + +dcp@80028000 { + compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <52 53>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index a8c21c256ba..1f5729f1062 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -50,6 +50,9 @@ Each dmas request consists of 4 cells: 0x00000008: Use fixed channel: Use automatic channel selection when unset Use DMA request line number when set + 0x00000010: Set channel as high priority: + Normal priority when unset + High priority when set Example: diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt index 90fa7da525b..c6908e7c42c 100644 --- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -5,6 +5,16 @@ Required properties: - reg: Should contain DMA registers location and length. This shuld include all of the per-channel registers. - interrupts: Should contain all of the per-channel DMA interrupts. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - dma +- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in + client nodes' dmas properties. The specifier represents the DMA request + select value for the peripheral. For more details, consult the Tegra TRM's + documentation of the APB DMA channel control register REQ_SEL field. Examples: @@ -27,4 +37,8 @@ apbdma: dma@6000a000 { 0 149 0x04 0 150 0x04 0 151 0x04 >; + clocks = <&tegra_car 34>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 7dab6a8f4a0..45414bbcd94 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -2,7 +2,11 @@ EXTCON FOR PALMAS/TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible: should contain one of: + * "ti,palmas-usb-vid". + * "ti,twl6035-usb-vid". + * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid"). + * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid"). Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt index b0019eb5330..798cfc9d383 100644 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on Every GPIO controller node must have #gpio-cells property defined, this information will be used to translate gpio-specifiers. +See bindings/gpio/gpio.txt for details of how to specify GPIO +information for devices. + +The GPIO module usually is connected to the SoC's internal interrupt +controller, see bindings/interrupt-controller/interrupts.txt (the +interrupt client nodes section) for details how to specify this GPIO +module's interrupt. + +The GPIO module may serve as another interrupt controller (cascaded to +the SoC's internal interrupt controller). See the interrupt controller +nodes section in bindings/interrupt-controller/interrupts.txt for +details. Required properties: -- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. +- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio" + for 83xx, "fsl,mpc8572-gpio" for 85xx, or + "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells: Should be two. The first cell is the pin number + and the second cell is used to specify optional + parameters (currently unused). +- interrupt-parent: Phandle for the interrupt controller that + services interrupts for this device. +- interrupts: Interrupt mapping for GPIO IRQ. +- gpio-controller: Marks the port as GPIO controller. + +Optional properties: +- interrupt-controller: Empty boolean property which marks the GPIO + module as an IRQ controller. +- #interrupt-cells: Should be two. Defines the number of integer + cells required to specify an interrupt within + this interrupt controller. The first cell + defines the pin number, the second cell + defines additional flags (trigger type, + trigger polarity). Note that the available + set of trigger conditions supported by the + GPIO module depends on the actual SoC. Example of gpio-controller nodes for a MPC8347 SoC: @@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC: #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xc00 0x100>; - interrupts = <74 0x8>; interrupt-parent = <&ipic>; + interrupts = <74 0x8>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; }; gpio2: gpio-controller@d00 { #gpio-cells = <2>; compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; reg = <0xd00 0x100>; - interrupts = <75 0x8>; interrupt-parent = <&ipic>; + interrupts = <75 0x8>; gpio-controller; }; -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = <number trigger>, where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: +Example of a peripheral using the GPIO module as an IRQ controller: funkyfpga@0 { compatible = "funky-fpga"; ... - interrupts = <4 3>; interrupt-parent = <&gpio1>; + interrupts = <4 3>; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt new file mode 100644 index 00000000000..a2e839d6e33 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -0,0 +1,41 @@ +Davinci GPIO controller bindings + +Required Properties: +- compatible: should be "ti,dm6441-gpio" + +- reg: Physical base address of the controller and the size of memory mapped + registers. + +- gpio-controller : Marks the device node as a gpio controller. + +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are + supported at a time. + +- ti,ngpio: The number of GPIO pins supported. + +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt + line to processor. + +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + +Example: + +gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH + 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt new file mode 100644 index 00000000000..80fcb7d70e1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt @@ -0,0 +1,37 @@ +TI/National Semiconductor LP3943 GPIO controller + +Required properties: + - compatible: "ti,lp3943-gpio" + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. See gpio.txt in this directory for a + description of the cells format. + +Example: +Simple LED controls with LP3943 GPIO controller + +&i2c4 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +leds { + compatible = "gpio-leds"; + indicator1 { + label = "indi1"; + gpios = <&gpioex 9 GPIO_ACTIVE_LOW>; + }; + + indicator2 { + label = "indi2"; + gpios = <&gpioex 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index daa30174bcc..3ddc7ccfe5f 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips): removed. - spi-max-frequency = The maximum frequency this chip is able to handle -Example I2C: +Optional properties: +- #interrupt-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. +- interrupt-controller: Marks the device node as a interrupt controller. +NOTE: The interrupt functionality is only supported for i2c versions of the +chips. The spi chips can also do the interrupts, but this is not supported by +the linux driver yet. + +Optional device specific properties: +- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices + with two interrupt outputs (these are the devices ending with 17 and + those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + IO 8-15 are bank 2. These chips have two different interrupt outputs: + One for bank 1 and another for bank 2. If irq-mirror is set, both + interrupts are generated regardless of the bank that an input change + occured on. If it is not set, the interrupt are only generated for the + bank they belong to. + On devices with only one interrupt output this property is useless. + +Example I2C (with interrupt): gpiom1: gpio@20 { compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells=<2>; + microchip,irq-mirror; }; Example SPI: diff --git a/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt new file mode 100644 index 00000000000..f8e8f185a3d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt @@ -0,0 +1,19 @@ +MOXA ART GPIO Controller + +Required properties: + +- #gpio-cells : Should be 2, The first cell is the pin number, + the second cell is used to specify polarity: + 0 = active high + 1 = active low +- compatible : Must be "moxa,moxart-gpio" +- reg : Should contain registers location and length + +Example: + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 8655df9440d..f61cef74a21 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -2,10 +2,11 @@ Required Properties: - - compatible: should be one of the following. + - compatible: should contain one of the following. - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. + - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller. - "renesas,gpio-rcar": for generic R-Car GPIO controller. - reg: Base address and length of each memory resource used by the GPIO diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index b4fa934ae3a..ab45c02aa65 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -9,6 +9,12 @@ Required properties: - #size-cells: The number of cells used to represent the size of an address range in the host1x address space. Should be 1. - ranges: The mapping of the host1x address space to the CPU address space. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - host1x The host1x top-level node defines a number of children, each representing one of the following host1x client modules: @@ -19,6 +25,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-mpe" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - mpe - vi: video input @@ -26,6 +38,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-vi" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi - epp: encoder pre-processor @@ -33,6 +51,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-epp" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - epp - isp: image signal processor @@ -40,6 +64,12 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-isp" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - isp - gr2d: 2D graphics engine @@ -47,12 +77,30 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-gr2d" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 2d - gr3d: 3D graphics engine Required properties: - compatible: "nvidia,tegra<chip>-gr3d" - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + (This property may be omitted if the only clock in the list is "3d") + - 3d + This MUST be the first entry. + - 3d2 (Only required on SoCs with two 3D clocks) + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - 3d + - 3d2 (Only required on SoCs with two 3D clocks) - dc: display controller @@ -60,6 +108,16 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-dc" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dc + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dc Each display controller node has a child node, named "rgb", that represents the RGB output associated with the controller. It can take the following @@ -76,6 +134,16 @@ of the following host1x client modules: - interrupts: The interrupt outputs from the controller. - vdd-supply: regulator for supply voltage - pll-supply: regulator for PLL + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - hdmi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - hdmi Optional properties: - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing @@ -88,12 +156,24 @@ of the following host1x client modules: - compatible: "nvidia,tegra<chip>-tvo" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. - dsi: display serial interface Required properties: - compatible: "nvidia,tegra<chip>-dsi" - reg: Physical base address and length of the controller's registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - dsi + This MUST be the first entry. + - parent + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - dsi Example: @@ -105,6 +185,9 @@ Example: reg = <0x50000000 0x00024000>; interrupts = <0 65 0x04 /* mpcore syncpt */ 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; #address-cells = <1>; #size-cells = <1>; @@ -115,41 +198,64 @@ Example: compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; interrupts = <0 68 0x04>; + clocks = <&tegra_car TEGRA20_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; }; vi { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; interrupts = <0 69 0x04>; + clocks = <&tegra_car TEGRA20_CLK_VI>; + resets = <&tegra_car 100>; + reset-names = "vi"; }; epp { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; interrupts = <0 70 0x04>; + clocks = <&tegra_car TEGRA20_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; }; isp { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; interrupts = <0 71 0x04>; + clocks = <&tegra_car TEGRA20_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; }; gr2d { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <0 72 0x04>; + clocks = <&tegra_car TEGRA20_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; }; dc@54200000 { compatible = "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; interrupts = <0 73 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP1>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "disp1", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; rgb { status = "disabled"; @@ -160,6 +266,11 @@ Example: compatible = "nvidia,tegra20-dc"; reg = <0x54240000 0x00040000>; interrupts = <0 74 0x04>; + clocks = <&tegra_car TEGRA20_CLK_DISP2>, + <&tegra_car TEGRA20_CLK_PLL_P>; + clock-names = "disp2", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; rgb { status = "disabled"; @@ -170,6 +281,11 @@ Example: compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <0 75 0x04>; + clocks = <&tegra_car TEGRA20_CLK_HDMI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; status = "disabled"; }; @@ -177,12 +293,18 @@ Example: compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <0 76 0x04>; + clocks = <&tegra_car TEGRA20_CLK_TVO>; status = "disabled"; }; dsi { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; status = "disabled"; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index b689a0d9441..4fade84bea1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -9,6 +9,7 @@ Required properties : - interrupts: interrupt number to the cpu. - #address-cells = <1>; - #size-cells = <0>; +- clocks: phandles to input clocks. Optional properties: - Child nodes conforming to i2c bus binding @@ -21,6 +22,7 @@ i2c0: i2c@fff84000 { interrupts = <12 4 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; 24c512@50 { compatible = "24c512"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt new file mode 100644 index 00000000000..34a3fb6f848 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -0,0 +1,50 @@ +* NXP PCA954x I2C bus switch + +Required Properties: + + - compatible: Must contain one of the following. + "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544", + "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548" + + - reg: The I2C address of the device. + + The following required properties are defined externally: + + - Standard I2C mux properties. See i2c-mux.txt in this directory. + - I2C child bus nodes. See i2c-mux.txt in this directory. + +Optional Properties: + + - reset-gpios: Reference to the GPIO connected to the reset input. + + +Example: + + i2c-switch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index 82e8f6f1717..582b4652a82 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -5,7 +5,11 @@ Required properties : - reg : Offset and length of the register set for the device - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c" - or "marvell,mv78230-i2c" + or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c" + Note: Only use "marvell,mv78230-a0-i2c" for a very rare, + initial version of the SoC which had broken offload + support. Linux auto-detects this and sets it + appropriately. - interrupts : The interrupt number Optional properties : diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/i2c-riic.txt new file mode 100644 index 00000000000..0bcc4716c31 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-riic.txt @@ -0,0 +1,29 @@ +Device tree configuration for Renesas RIIC driver + +Required properties: +- compatible : "renesas,riic-<soctype>". "renesas,riic-rz" as fallback +- reg : address start and address range size of device +- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI) +- clock-frequency : frequency of bus clock in Hz +- #address-cells : should be <1> +- #size-cells : should be <0> + +Pinctrl properties might be needed, too. See there. + +Example: + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, + <0 158 IRQ_TYPE_EDGE_RISING>, + <0 159 IRQ_TYPE_EDGE_RISING>, + <0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 164 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index 296eb453612..278de8e64bb 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -10,6 +10,8 @@ Required properties: inside HDMIPHY block found on several samsung SoCs (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used on EXYNOS5440 which does not need GPIO configuration. + (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as + a host to SATA PHY controller on an internal bus. - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index ef77cc7a0e4..87507e9ce6d 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -39,12 +39,23 @@ Required properties: - interrupts: Should contain I2C controller interrupts. - address-cells: Address cells for I2C device address. - size-cells: Size of the I2C device address. -- clocks: Clock ID as per - Documentation/devicetree/bindings/clock/tegra<chip-id>.txt - for I2C controller. -- clock-names: Name of the clock: - Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk". - Tegra114 I2C controller: "div-clk". +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - i2c +- dmas: Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names: Must include the following entries: + - rx + - tx Example: @@ -56,5 +67,9 @@ Example: #size-cells = <0>; clocks = <&tegra_car 12>, <&tegra_car 124>; clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index b1cb3415e6f..1a1ac2e560e 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -16,6 +16,7 @@ adt7461 +/-1C TDM Extended Temp Range I.C at,24c08 i2c serial eeprom (24cxx) atmel,24c02 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) +capella,cm32181 CM32181: Ambient Light Sensor catalyst,24c32 i2c serial eeprom dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM @@ -39,6 +40,7 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +isl,isl12057 Intersil ISL12057 I2C RTC Chip maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt new file mode 100644 index 00000000000..ecc24c199fd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/dht11.txt @@ -0,0 +1,14 @@ +* DHT11 humidity/temperature sensor (and compatibles like DHT22) + +Required properties: + - compatible: Should be "dht11" + - gpios: Should specify the GPIO connected to the sensor's data + line, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. + +Example: + +humidity_sensor { + compatible = "dht11"; + gpios = <&gpio0 6 0>; +} diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt new file mode 100644 index 00000000000..f91e809e736 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2563.txt @@ -0,0 +1,19 @@ +* AMS TAOS TSL2563 ambient light sensor + +Required properties: + + - compatible : should be "amstaos,tsl2563" + - reg : the I2C address of the sensor + +Optional properties: + + - amstaos,cover-comp-gain : integer used as multiplier for gain + compensation (default = 1) + +Example: + +tsl2563@29 { + compatible = "amstaos,tsl2563"; + reg = <0x29>; + amstaos,cover-comp-gain = <16>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt new file mode 100644 index 00000000000..90d5f34db04 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt @@ -0,0 +1,17 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + - reg : the I2C address of the magnetometer - typically 0x1e + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { + compatible = "honeywell,hmc5843" + reg = <0x1e>; +}; diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 2995fae7ee4..0382b8bd69c 100644 --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -13,6 +13,12 @@ Required properties: array of pin numbers which is used as column. - linux,keymap: The keymap for keys as described in the binding document devicetree/bindings/input/matrix-keymap.txt. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - kbc Optional properties, in addition to those specified by the shared matrix-keyboard bindings: @@ -31,6 +37,9 @@ keyboard: keyboard { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + resets = <&tegra_car 36>; + reset-names = "kbc"; nvidia,ghost-filter; nvidia,debounce-delay-ms = <640>; nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */ diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt index 3d3b2b91e33..32cec4b26cd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt @@ -14,5 +14,5 @@ intc: interrupt-controller { compatible = "allwinner,sun4i-ic"; reg = <0x01c20400 0x400>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt new file mode 100644 index 00000000000..492911744ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt @@ -0,0 +1,32 @@ +Synopsys DesignWare APB interrupt controller (dw_apb_ictl) + +Synopsys DesignWare provides interrupt controller IP for APB known as +dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with +APB bus, e.g. Marvell Armada 1500. + +Required properties: +- compatible: shall be "snps,dw-apb-ictl" +- reg: physical base address of the controller and length of memory mapped + region starting with ENABLE_LOW register +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 +- interrupts: interrupt reference to primary interrupt controller +- interrupt-parent: (optional) reference specific primary interrupt controller + +The interrupt sources map to the corresponding bits in the interrupt +registers, i.e. +- 0 maps to bit 0 of low interrupts, +- 1 maps to bit 1 of low interrupts, +- 32 maps to bit 0 of high interrupts, +- 33 maps to bit 1 of high interrupts, +- (optional) fast interrupts start at 64. + +Example: + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index fc2191ecfd6..8edcb9bd873 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -112,6 +112,15 @@ Following are properties of regulator subnode. ams,enable-tracking: Enable tracking with SD1, only supported by LDO3. +Power-off: +========= +AS3722 supports the system power off by turning off all its rail. This +is provided through pm_power_off. +The device node should have the following properties to enable this +functionality +ams,system-power-controller: Boolean, to enable the power off functionality + through this device. + Example: -------- #include <dt-bindings/mfd/as3722.h> @@ -120,6 +129,8 @@ ams3722 { compatible = "ams,as3722"; reg = <0x48>; + ams,system-power-controller; + interrupt-parent = <&intc>; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 5f229c5f6da..8009c3d87f3 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -17,6 +17,15 @@ Required properties (SPI): - compatible: "google,cros-ec-spi" - reg: SPI chip select +Optional properties (SPI): +- google,cros-ec-spi-msg-delay: Some implementations of the EC require some + additional processing time in order to accept new transactions. If the delay + between transactions is not long enough the EC may not be able to respond + properly to subsequent transactions and cause them to hang. This property + specifies the delay, in usecs, introduced between transactions to account + for the time required by the EC to get back into a state in which new data + can be accepted. + Required properties (LPC): - compatible: "google,cros-ec-lpc" - reg: List of (IO address, size) pairs defining the interface uses diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt new file mode 100644 index 00000000000..e8591d6b11b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -0,0 +1,33 @@ +TI/National Semiconductor LP3943 MFD driver + +Required properties: + - compatible: "ti,lp3943" + - reg: I2C slave address. From 0x60 to 0x67. + +LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. + +For the LP3943 GPIO properties please refer to: +Documentation/devicetree/bindings/gpio/gpio-lp3943.txt + +For the LP3943 PWM properties please refer to: +Documentation/devicetree/bindings/pwm/pwm-lp3943.txt + +Example: + +lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + gpioex: gpio { + compatible = "ti,lp3943-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index c6a3469d343..678f3cf0b8f 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c client while probing.This document describes the binding for mfd device and PMIC submodule. +Binding for the built-in 32k clock generator block is defined separately +in bindings/clk/maxim,max77686.txt file. + Required properties: - compatible : Must be "maxim,max77686"; - reg : Specifies the i2c slave address of PMIC block. diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 78a840d7510..15ee89c3cc7 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -60,7 +60,7 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are 1 to 38 - - Example: LDO0, LD01, LDO28 + - Example: LDO1, LD02, LDO28 - BUCKn - valid values for n are 1 to 10. - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index a45ae08c8ed..60960b2755f 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -6,6 +6,9 @@ Required properties: - atmel,at91sam9g45-ssc: support dma transfer - reg: Should contain SSC registers location and length - interrupts: Should contain SSC interrupt +- clock-names: tuple listing input clock names. + Required elements: "pclk" +- clocks: phandles to input clocks. Required properties for devices compatible with "atmel,at91sam9g45-ssc": @@ -20,6 +23,8 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; }; - DMA transfer: diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt index 91dfda2e4e1..d7a6deb6b21 100644 --- a/Documentation/devicetree/bindings/misc/bmp085.txt +++ b/Documentation/devicetree/bindings/misc/bmp085.txt @@ -8,6 +8,8 @@ Optional properties: - temp-measurement-period: temperature measurement period (milliseconds) - default-oversampling: default oversampling value to be used at startup, value range is 0-3 with rising sensitivity. +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ Example: @@ -17,4 +19,6 @@ pressure@77 { chip-id = <10>; temp-measurement-period = <100>; default-oversampling = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; }; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index c67b975c890..532b1d440ab 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index c6d7b11db9e..f357c16ea81 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver. Required properties: - compatible : Should be "nvidia,<chip>-sdhci" +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sdhci Optional properties: - power-gpios : Specify GPIOs for power control @@ -18,6 +24,9 @@ sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <47>; + clocks = <&tegra_car 14>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 00000000000..8de57996976 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 48b259e29e8..bad381faf03 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -4,7 +4,7 @@ This file provides information, what the device node for the davinci_emac interface contains. Required properties: -- compatible: "ti,davinci-dm6467-emac"; +- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac" - reg: Offset and length of the register set for the device - ti,davinci-ctrl-reg-offset: offset to control register - ti,davinci-ctrl-mod-reg-offset: offset to control module register diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index d5363922140..845ff848d89 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,7 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-supply: regulator that powers the Ethernet PHY. Example: @@ -25,4 +26,5 @@ ethernet@83fec000 { phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b4248..5a41a8658da 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt index 5aeee53ff9f..5ae601e7f51 100644 --- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt +++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt @@ -7,3 +7,15 @@ Required properties: - clock-frequency : the frequency of the i2c bus - gpios : the gpio used for ec request - slave-addr: the i2c address of the slave controller +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2c diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index d5d26d44369..d6fae13ff06 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -19,6 +19,8 @@ Required properties: to define the mapping of the PCIe interface to interrupt numbers. - num-lanes: number of lanes to use + +Optional properties: - reset-gpio: gpio pin number of power good signal Optional properties for fsl,imx6q-pcie diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 6b7510775c5..24cee06915c 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -42,14 +42,19 @@ Required properties: - 0xc2000000: prefetchable memory region Please refer to the standard PCI bus binding document for a more detailed explanation. -- clocks: List of clock inputs of the controller. Must contain an entry for - each entry in the clock-names property. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pex": The Tegra clock of that name - "afi": The Tegra clock of that name - "pcie_xclk": The Tegra clock of that name - "pll_e": The Tegra clock of that name - "cml": The Tegra clock of that name (not required for Tegra20) + - pex + - afi + - pll_e + - cml (not required for Tegra20) +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pex + - afi + - pcie_x Root ports are defined as subnodes of the PCIe controller node. @@ -91,9 +96,10 @@ SoC DTSI: 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ - clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>, - <&tegra_car 118>; - clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>; + clock-names = "pex", "afi", "pll_e"; + resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; status = "disabled"; pci@1,0 { diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt new file mode 100644 index 00000000000..3dc8b3d2ffb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt new file mode 100644 index 00000000000..9e9e9ef9f85 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt @@ -0,0 +1,461 @@ +Broadcom Capri Pin Controller + +This is a pin controller for the Broadcom BCM281xx SoC family, which includes +BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. + +=== Pin Controller Node === + +Required Properties: + +- compatible: Must be "brcm,capri-pinctrl". +- reg: Base address of the PAD Controller register block and the size + of the block. + +For example, the following is the bare minimum node: + + pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + }; + +As a pin controller device, in addition to the required properties, this node +should also contain the pin configuration nodes that client devices reference, +if any. + +=== Pin Configuration Node === + +Each pin configuration node is a sub-node of the pin controller node and is a +container of an arbitrary number of subnodes, called pin group nodes in this +document. + +Please refer to the pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the definition of a +"pin configuration node". + +=== Pin Group Node === + +A pin group node specifies the desired pin mux and/or pin configuration for an +arbitrary number of pins. The name of the pin group node is optional and not +used. + +A pin group node only affects the properties specified in the node, and has no +effect on any properties that are omitted. + +The pin group node accepts a subset of the generic pin config properties. For +details generic pin config properties, please refer to pinctrl-bindings.txt +and <include/linux/pinctrl/pinconfig-generic.h>. + +Each pin controlled by this pin controller belong to one of three types: +Standard, I2C, and HDMI. Each type accepts a different set of pin config +properties. A list of pins and their types is provided below. + +Required Properties (applicable to all pins): + +- pins: Multiple strings. Specifies the name(s) of one or more pins to + be configured by this node. + +Optional Properties (for standard pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. +- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. +- bias-pull-up: No arguments. Pull up on pin. +- bias-pull-down: No arguments. Pull down on pin. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) +- drive-strength: Integer. Drive strength in mA. Valid values are + 2, 4, 6, 8, 10, 12, 14, 16 mA. + +Optional Properties (for I2C pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 + pull-up resisitors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins, so the valid values + are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Optional Properties (for HDMI pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- slew-rate: Integer. Controls slew rate. + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Example: +// pin controller node +pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + + // pin configuration node + dev_a_default: dev_a_active { + //group node defining 1 standard pin + grp_1 { + pins = "std_pin1"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + // group node defining 2 I2C pins + grp_2 { + pins = "i2c_pin1", "i2c_pin2"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + // group node defining 2 HDMI pins + grp_3 { + pins = "hdmi_pin1", "hdmi_pin2"; + function = "alt3"; + slew-rate = <1>; + }; + + // other pin group nodes + ... + }; + + // other pin configuration nodes + ... +}; + +In the example above, "dev_a_active" is a pin configuration node with a number +of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in +the "pins" property. Thus, the remaining properties in the "grp_1" node applies +only to this pin, including the following settings: + - setting pinmux to "alt1" + - enabling schmitt-trigger (hystersis) mode + - disabling pin bias + - setting the slew-rate to 1 + - setting the drive strength to 4 mA +Note that neither "input-enable" nor "input-disable" was specified - the pinctrl +subsystem will therefore leave this property unchanged from whatever state it +was in before applying these changes. + +The "pins" property in the pin group node "grp_2" specifies two pins - +"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, +therefore, applies to both of these pins. The properties include: + - setting pinmux to "alt2" + - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors + in parallel) + - enabling both pins' input +"slew-rate" is not specified in this pin group node, so the slew-rate for these +pins are left as-is. + +Finally, "grp_3" defines two HDMI pins. The following properties are applied to +both pins: + - setting pinmux to "alt3" + - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps + Highspeed mode +The input is neither enabled or disabled, and is left untouched. + +=== Pin Names and Type === + +The following are valid pin names and their pin types: + + "adcsync", Standard + "bat_rm", Standard + "bsc1_scl", I2C + "bsc1_sda", I2C + "bsc2_scl", I2C + "bsc2_sda", I2C + "classgpwr", Standard + "clk_cx8", Standard + "clkout_0", Standard + "clkout_1", Standard + "clkout_2", Standard + "clkout_3", Standard + "clkreq_in_0", Standard + "clkreq_in_1", Standard + "cws_sys_req1", Standard + "cws_sys_req2", Standard + "cws_sys_req3", Standard + "digmic1_clk", Standard + "digmic1_dq", Standard + "digmic2_clk", Standard + "digmic2_dq", Standard + "gpen13", Standard + "gpen14", Standard + "gpen15", Standard + "gpio00", Standard + "gpio01", Standard + "gpio02", Standard + "gpio03", Standard + "gpio04", Standard + "gpio05", Standard + "gpio06", Standard + "gpio07", Standard + "gpio08", Standard + "gpio09", Standard + "gpio10", Standard + "gpio11", Standard + "gpio12", Standard + "gpio13", Standard + "gpio14", Standard + "gps_pablank", Standard + "gps_tmark", Standard + "hdmi_scl", HDMI + "hdmi_sda", HDMI + "ic_dm", Standard + "ic_dp", Standard + "kp_col_ip_0", Standard + "kp_col_ip_1", Standard + "kp_col_ip_2", Standard + "kp_col_ip_3", Standard + "kp_row_op_0", Standard + "kp_row_op_1", Standard + "kp_row_op_2", Standard + "kp_row_op_3", Standard + "lcd_b_0", Standard + "lcd_b_1", Standard + "lcd_b_2", Standard + "lcd_b_3", Standard + "lcd_b_4", Standard + "lcd_b_5", Standard + "lcd_b_6", Standard + "lcd_b_7", Standard + "lcd_g_0", Standard + "lcd_g_1", Standard + "lcd_g_2", Standard + "lcd_g_3", Standard + "lcd_g_4", Standard + "lcd_g_5", Standard + "lcd_g_6", Standard + "lcd_g_7", Standard + "lcd_hsync", Standard + "lcd_oe", Standard + "lcd_pclk", Standard + "lcd_r_0", Standard + "lcd_r_1", Standard + "lcd_r_2", Standard + "lcd_r_3", Standard + "lcd_r_4", Standard + "lcd_r_5", Standard + "lcd_r_6", Standard + "lcd_r_7", Standard + "lcd_vsync", Standard + "mdmgpio0", Standard + "mdmgpio1", Standard + "mdmgpio2", Standard + "mdmgpio3", Standard + "mdmgpio4", Standard + "mdmgpio5", Standard + "mdmgpio6", Standard + "mdmgpio7", Standard + "mdmgpio8", Standard + "mphi_data_0", Standard + "mphi_data_1", Standard + "mphi_data_2", Standard + "mphi_data_3", Standard + "mphi_data_4", Standard + "mphi_data_5", Standard + "mphi_data_6", Standard + "mphi_data_7", Standard + "mphi_data_8", Standard + "mphi_data_9", Standard + "mphi_data_10", Standard + "mphi_data_11", Standard + "mphi_data_12", Standard + "mphi_data_13", Standard + "mphi_data_14", Standard + "mphi_data_15", Standard + "mphi_ha0", Standard + "mphi_hat0", Standard + "mphi_hat1", Standard + "mphi_hce0_n", Standard + "mphi_hce1_n", Standard + "mphi_hrd_n", Standard + "mphi_hwr_n", Standard + "mphi_run0", Standard + "mphi_run1", Standard + "mtx_scan_clk", Standard + "mtx_scan_data", Standard + "nand_ad_0", Standard + "nand_ad_1", Standard + "nand_ad_2", Standard + "nand_ad_3", Standard + "nand_ad_4", Standard + "nand_ad_5", Standard + "nand_ad_6", Standard + "nand_ad_7", Standard + "nand_ale", Standard + "nand_cen_0", Standard + "nand_cen_1", Standard + "nand_cle", Standard + "nand_oen", Standard + "nand_rdy_0", Standard + "nand_rdy_1", Standard + "nand_wen", Standard + "nand_wp", Standard + "pc1", Standard + "pc2", Standard + "pmu_int", Standard + "pmu_scl", I2C + "pmu_sda", I2C + "rfst2g_mtsloten3g", Standard + "rgmii_0_rx_ctl", Standard + "rgmii_0_rxc", Standard + "rgmii_0_rxd_0", Standard + "rgmii_0_rxd_1", Standard + "rgmii_0_rxd_2", Standard + "rgmii_0_rxd_3", Standard + "rgmii_0_tx_ctl", Standard + "rgmii_0_txc", Standard + "rgmii_0_txd_0", Standard + "rgmii_0_txd_1", Standard + "rgmii_0_txd_2", Standard + "rgmii_0_txd_3", Standard + "rgmii_1_rx_ctl", Standard + "rgmii_1_rxc", Standard + "rgmii_1_rxd_0", Standard + "rgmii_1_rxd_1", Standard + "rgmii_1_rxd_2", Standard + "rgmii_1_rxd_3", Standard + "rgmii_1_tx_ctl", Standard + "rgmii_1_txc", Standard + "rgmii_1_txd_0", Standard + "rgmii_1_txd_1", Standard + "rgmii_1_txd_2", Standard + "rgmii_1_txd_3", Standard + "rgmii_gpio_0", Standard + "rgmii_gpio_1", Standard + "rgmii_gpio_2", Standard + "rgmii_gpio_3", Standard + "rtxdata2g_txdata3g1", Standard + "rtxen2g_txdata3g2", Standard + "rxdata3g0", Standard + "rxdata3g1", Standard + "rxdata3g2", Standard + "sdio1_clk", Standard + "sdio1_cmd", Standard + "sdio1_data_0", Standard + "sdio1_data_1", Standard + "sdio1_data_2", Standard + "sdio1_data_3", Standard + "sdio4_clk", Standard + "sdio4_cmd", Standard + "sdio4_data_0", Standard + "sdio4_data_1", Standard + "sdio4_data_2", Standard + "sdio4_data_3", Standard + "sim_clk", Standard + "sim_data", Standard + "sim_det", Standard + "sim_resetn", Standard + "sim2_clk", Standard + "sim2_data", Standard + "sim2_det", Standard + "sim2_resetn", Standard + "sri_c", Standard + "sri_d", Standard + "sri_e", Standard + "ssp_extclk", Standard + "ssp0_clk", Standard + "ssp0_fs", Standard + "ssp0_rxd", Standard + "ssp0_txd", Standard + "ssp2_clk", Standard + "ssp2_fs_0", Standard + "ssp2_fs_1", Standard + "ssp2_fs_2", Standard + "ssp2_fs_3", Standard + "ssp2_rxd_0", Standard + "ssp2_rxd_1", Standard + "ssp2_txd_0", Standard + "ssp2_txd_1", Standard + "ssp3_clk", Standard + "ssp3_fs", Standard + "ssp3_rxd", Standard + "ssp3_txd", Standard + "ssp4_clk", Standard + "ssp4_fs", Standard + "ssp4_rxd", Standard + "ssp4_txd", Standard + "ssp5_clk", Standard + "ssp5_fs", Standard + "ssp5_rxd", Standard + "ssp5_txd", Standard + "ssp6_clk", Standard + "ssp6_fs", Standard + "ssp6_rxd", Standard + "ssp6_txd", Standard + "stat_1", Standard + "stat_2", Standard + "sysclken", Standard + "traceclk", Standard + "tracedt00", Standard + "tracedt01", Standard + "tracedt02", Standard + "tracedt03", Standard + "tracedt04", Standard + "tracedt05", Standard + "tracedt06", Standard + "tracedt07", Standard + "tracedt08", Standard + "tracedt09", Standard + "tracedt10", Standard + "tracedt11", Standard + "tracedt12", Standard + "tracedt13", Standard + "tracedt14", Standard + "tracedt15", Standard + "txdata3g0", Standard + "txpwrind", Standard + "uartb1_ucts", Standard + "uartb1_urts", Standard + "uartb1_urxd", Standard + "uartb1_utxd", Standard + "uartb2_urxd", Standard + "uartb2_utxd", Standard + "uartb3_ucts", Standard + "uartb3_urts", Standard + "uartb3_urxd", Standard + "uartb3_utxd", Standard + "uartb4_ucts", Standard + "uartb4_urts", Standard + "uartb4_urxd", Standard + "uartb4_utxd", Standard + "vc_cam1_scl", I2C + "vc_cam1_sda", I2C + "vc_cam2_scl", I2C + "vc_cam2_sda", I2C + "vc_cam3_scl", I2C + "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt new file mode 100644 index 00000000000..fd653bde18d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt @@ -0,0 +1,23 @@ +* Freescale IMX25 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx25-pinfunc.h in device tree source folder for all available +imx25 PIN_FUNC_ID. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt index 353eca0efbf..d1706ea8257 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt @@ -52,12 +52,25 @@ Required properties for pin configuration node: CONFIG can be 0 or 1, meaning Pullup disable/enable. +The iomux controller has gpio child nodes which are embedded in the iomux +control registers. They have to be defined as child nodes of the iomux device +node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges" +properties for the iomux device node are required. Example: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { @@ -83,6 +96,15 @@ The above example using macros: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt new file mode 100644 index 00000000000..6464bf76946 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt @@ -0,0 +1,144 @@ +NVIDIA Tegra124 pinmux controller + +The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 +pinctrl binding, as described in nvidia,tegra20-pinmux.txt and +nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as +a baseline, and only documents the differences between the two bindings. + +Required properties: +- compatible: "nvidia,tegra124-pinmux" +- reg: Should contain a list of base address and size pairs for: + -- first entry - the drive strength and pad control registers. + -- second entry - the pinmux registers + +Tegra124 adds the following optional properties for pin configuration subnodes. +The macros for options are defined in the + include/dt-binding/pinctrl/pinctrl-tegra.h. +- nvidia,enable-input: Integer. Enable the pin's input path. + enable :TEGRA_PIN_ENABLE0 and + disable or output only: TEGRA_PIN_DISABLE. +- nvidia,open-drain: Integer. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,io-reset: Integer. Reset the IO path. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE + +Please refer the Tegra TRM for complete details regarding which groups +support which functionality. + +Valid values for pin and group names are: + + per-pin mux groups: + + These all support nvidia,function, nvidia,tristate, nvidia,pull, + nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, + nvidia,io-reset and nvidia,rcv-sel. + + ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, + ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, + ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, + dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, + sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, + ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, + uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, + gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, + dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, + pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, + pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, + sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, + sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, + cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, + pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, + kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, + kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, + kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, + spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, + dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, + sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, + sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, + pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, + gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, + pff2, dp_hpd_pff0, + + drive groups: + + These all support nvidia,pull-down-strength, nvidia,pull-up-strength, + nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all + support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode + and nvidia,drive-type. + + ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, + dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, + gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. + +Valid values for nvidia,functions are: + + blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, + displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, + gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, + i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, + pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, + sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, + vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, + dp, rtck, sys, clk tmds. + +Example: + + pinmux: pinmux { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164 /* Pad control registers */ + 0x70003000 0x434>; /* PinMux registers */ + }; + +Example pinmux entries: + + pinctrl { + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + sdhci@78000400 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc4_default>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 1958ca9f9e5..4414163e76d 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -151,6 +151,8 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA +input-enable - enable input on pin (no effect on output) +input-disable - disable input on pin (no effect on output) input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode input-debounce - debounce mode with debound time X @@ -158,6 +160,7 @@ low-power-enable - enable low power mode low-power-disable - disable low power mode output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +slew-rate - set the slew rate Some of the generic properties take arguments. For those that do, the arguments are described below. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 7069a0b84e3..bc0dfdfdb14 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -98,7 +98,7 @@ below for more information. In case when one register changes more than one pin's mux the pinctrl-single,bits need to be used which takes three parameters: - pinctrl-single,bits = <0xdc 0x18, 0xff>; + pinctrl-single,bits = <0xdc 0x18 0xff>; Where 0xdc is the offset from the pinctrl register base address for the device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt new file mode 100644 index 00000000000..4c352be5dd6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -0,0 +1,92 @@ +Qualcomm MSM8974 TLMM block + +Required properties: +- compatible: "qcom,msm8x74-pinctrl" +- reg: Should be the base address and length of the TLMM block. +- interrupts: Should be the parent IRQ of the TLMM block. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. + The first cell is the gpio pin number and the + second cell is used for optional parameters. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Qualcomm's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + +Non-empty subnodes must specify the 'pins' property. +Note that not all properties are valid for all pins. + + +Valid values for qcom,pins are: + gpio0-gpio145 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data + Supports bias and drive-strength + +Valid values for qcom,function are: + blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus + + (Note that this is not yet the complete list of functions) + + + +Example: + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_default>; + + uart2_default: uart2_default { + mux { + qcom,pins = "gpio4", "gpio5"; + qcom,function = "blsp_uart2"; + }; + + tx { + qcom,pins = "gpio4"; + drive-strength = <4>; + bias-disable; + }; + + rx { + qcom,pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index d5dac7b843a..35d2e1f186f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -26,6 +26,11 @@ Optional properties: - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden otherwise. Should be 3. + - interrupts-extended: Specify the interrupts associated with external + IRQ pins. This property is mandatory when the PFC handles GPIOs and + forbidden otherwise. When specified, it must contain one interrupt per + external IRQ, sorted by external IRQ number. + The PFC node also acts as a container for pin configuration nodes. Please refer to pinctrl-bindings.txt in this directory for the definition of the term "pin configuration node" and for the common pinctrl bindings used by client devices. @@ -103,6 +108,15 @@ Example 1: SH73A0 (SH-Mobile AG5) pin controller node <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; }; Example 2: A GPIO LED node that references a GPIO diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt new file mode 100644 index 00000000000..fa359690796 --- /dev/null +++ b/Documentation/devicetree/bindings/power/isp1704.txt @@ -0,0 +1,17 @@ +Binding for NXP ISP1704 USB Charger Detection + +Required properties: +- compatible: Should contain one of the following: + * "nxp,isp1704" +- nxp,enable-gpio: Should contain a phandle + gpio-specifier + to the GPIO pin connected to the chip's enable pin. +- usb-phy: Should contain a phandle to the USB PHY + the ISP1704 is connected to. + +Example: + +isp1704 { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; +}; diff --git a/Documentation/devicetree/bindings/power_supply/charger-manager.txt b/Documentation/devicetree/bindings/power_supply/charger-manager.txt new file mode 100644 index 00000000000..2b33750e3db --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/charger-manager.txt @@ -0,0 +1,81 @@ +charger-manager bindings +~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties : + - compatible : "charger-manager" + - <>-supply : for regulator consumer + - cm-num-chargers : number of chargers + - cm-chargers : name of chargers + - cm-fuel-gauge : name of battery fuel gauge + - subnode <regulator> : + - cm-regulator-name : name of charger regulator + - subnode <cable> : + - cm-cable-name : name of charger cable + - cm-cable-extcon : name of extcon dev +(optional) - cm-cable-min : minimum current of cable +(optional) - cm-cable-max : maximum current of cable + +Optional properties : + - cm-name : charger manager's name (default : "battery") + - cm-poll-mode : polling mode (enum polling_modes) + - cm-poll-interval : polling interval + - cm-battery-stat : battery status (enum data_source) + - cm-fullbatt-* : data for full battery checking + - cm-thermal-zone : name of external thermometer's thermal zone + - cm-battery-* : threshold battery temperature for charging + -cold : critical cold temperature of battery for charging + -cold-in-minus : flag that cold temerature is in minus degree + -hot : critical hot temperature of battery for charging + -temp-diff : temperature difference to allow recharging + - cm-dis/charging-max = limits of charging duration + +Example : + charger-manager@0 { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-ms = <30000>; + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-num-chargers = <3>; + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1" + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator@0 { + cm-regulator-name = "chg-reg"; + cable@0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable@1 { + cm-cable-name = "TA"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + + }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index c3fc57af877..c7ea9d4a988 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -7,6 +7,12 @@ Required properties: - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pwm Example: @@ -14,4 +20,7 @@ Example: compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; + clocks = <&tegra_car 17>; + resets = <&tegra_car 17>; + reset-names = "pwm"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt new file mode 100644 index 00000000000..7bd9d3b12ce --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt @@ -0,0 +1,58 @@ +TI/National Semiconductor LP3943 PWM controller + +Required properties: + - compatible: "ti,lp3943-pwm" + - #pwm-cells: Should be 2. See pwm.txt in this directory for a + description of the cells format. + Note that this hardware limits the period length to the + range 6250~1600000. + - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1. + 0 = output 0 + 1 = output 1 + . + . + 15 = output 15 + +Example: +PWM 0 is for RGB LED brightness control +PWM 1 is for brightness control of LP8557 backlight device + +&i2c3 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + /* + * PWM 0 : output 8, 9 and 10 + * PWM 1 : output 15 + */ + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; + }; + +}; + +/* LEDs control with PWM 0 of LP3943 */ +pwmleds { + compatible = "pwm-leds"; + rgb { + label = "indi::rgb"; + pwms = <&pwm3943 0 10000>; + max-brightness = <255>; + }; +}; + +&i2c4 { + /* Backlight control with PWM 1 of LP3943 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + + pwms = <&pwm3943 1 10000>; + pwm-names = "lp8557"; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt new file mode 100644 index 00000000000..31406fd4a43 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt @@ -0,0 +1,27 @@ +Haoyu Microelectronics HYM8563 Real Time Clock + +The HYM8563 provides basic rtc and alarm functionality +as well as a clock output of up to 32kHz. + +Required properties: +- compatible: should be: "haoyu,hym8563" +- reg: i2c address +- interrupts: rtc alarm/event interrupt +- #clock-cells: the value should be 0 + +Example: + +hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + #clock-cells = <0>; +}; + +device { +... + clocks = <&hym8563>; +... +}; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt new file mode 100644 index 00000000000..d0f937c355b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt @@ -0,0 +1,12 @@ +* Maxim (Dallas) DS1742/DS1743 Real Time Clock + +Required properties: +- compatible: Should contain "maxim,ds1742". +- reg: Physical base address of the RTC and length of memory + mapped region. + +Example: + rtc: rtc@10000000 { + compatible = "maxim,ds1742"; + reg = <0x10000000 0x800>; + }; diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt index 93f45e9dce7..652d1ff2e8b 100644 --- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt @@ -9,6 +9,8 @@ Required properties: - compatible : should be "nvidia,tegra20-rtc". - reg : Specifies base physical address and size of the registers. - interrupts : A single interrupt specifier. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -16,4 +18,5 @@ timer { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt new file mode 100644 index 00000000000..7cb9dbf3487 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -0,0 +1,17 @@ +* sun4i/sun7i Real Time Clock + +RTC controller for the Allwinner A10/A20 + +Required properties: +- compatible : Should be "allwinner,sun4i-rtc" or "allwinner,sun7i-a20-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. + +Example: + +rtc: rtc@01c20d00 { + compatible = "allwinner,sun4i-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; +}; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 2191dcb9f1d..9c5d19ac935 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -6,6 +6,9 @@ Required properties: additional mode or an USART new feature. - reg: Should contain registers location and length - interrupts: Should contain interrupt +- clock-names: tuple listing input clock names. + Required elements: "usart" +- clocks: phandles to input clocks. Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data @@ -26,6 +29,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x4000>; interrupts = <7>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; }; @@ -35,6 +40,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 4 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; dmas = <&dma0 2 0x3>, diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt new file mode 100644 index 00000000000..12f3cf834de --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt @@ -0,0 +1,28 @@ +* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible: Should be "cirrus,clps711x-uart". +- reg: Address and length of the register set for the device. +- interrupts: Should contain UART TX and RX interrupt. +- clocks: Should contain UART core clock number. +- syscon: Phandle to SYSCON node, which contain UART control bits. + +Optional properties: +- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS). + +Note: Each UART port should have an alias correctly numbered +in "aliases" node. + +Example: + aliases { + serial0 = &uart1; + }; + + uart1: uart@80000480 { + compatible = "cirrus,clps711x-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks 11>; + syscon = <&syscon1>; + uart-use-ms; + }; diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index 392a4493eeb..845850caf08 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this UART controller. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - serial +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Optional properties: - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable @@ -18,7 +27,11 @@ serial@70006000 { reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - nvidia,dma-request-selector = <&apbdma 8>; nvidia,enable-modem-interrupt; + clocks = <&tegra_car 6>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt new file mode 100644 index 00000000000..f372cf29068 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -0,0 +1,46 @@ +* Renesas SH-Mobile Serial Communication Interface + +Required properties: + + - compatible: Must contain one of the following: + + - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. + - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. + - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. + - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. + - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART. + - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. + - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. + - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. + - "renesas,scif" for generic SCIF compatible UART. + - "renesas,scifa" for generic SCIFA compatible UART. + - "renesas,scifb" for generic SCIFB compatible UART. + - "renesas,hscif" for generic HSCIF compatible UART. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed by the + generic version. + + - reg: Base address and length of the I/O registers used by the UART. + - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. + + - clocks: Must contain a phandle and clock-specifier pair for each entry + in clock-names. + - clock-names: Must contain "sci_ick" for the SCIx UART interface clock. + +Note: Each enabled SCIx UART should have an alias correctly numbered in the +"aliases" node. + +Example: + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic"; + reg = <0 0xe6c40000 0 64>; + interrupt-parent = <&gic>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; + clock-names = "sci_ick"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt new file mode 100644 index 00000000000..5875ca459ed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -0,0 +1,31 @@ +ADI AXI-I2S controller + +Required properties: + - compatible : Must be "adi,axi-i2s-1.00.a" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channels that are used by + the core. The core expects two dma channels, one for transmit and one for + receive. + - dma-names : "tx" for the transmit channel, "rx" for the receive channel. + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + i2s: i2s@0x77600000 { + compatible = "adi,axi-i2s-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>, <&ps7_dma 1>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt new file mode 100644 index 00000000000..46f34496531 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -0,0 +1,30 @@ +ADI AXI-SPDIF controller + +Required properties: + - compatible : Must be "adi,axi-spdif-1.00.a" + - reg : Must contain SPDIF core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects one dma channel for transmit. + - dma-names : Must be "tx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + spdif: spdif@0x77400000 { + compatible = "adi,axi-spdif-tx-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt new file mode 100644 index 00000000000..65783de0aed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt @@ -0,0 +1,25 @@ +* Broadcom BCM2835 SoC I2S/PCM module + +Required properties: +- compatible: "brcm,bcm2835-i2s" +- reg: A list of base address and size entries: + * The first entry should cover the PCM registers + * The second entry should cover the PCM clock registers +- dmas: List of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + + One of the DMA channels will be responsible for transmission (should be + named "tx") and one for reception (should be named "rx"). + +Example: + +bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x20>, + <0x7e101098 0x02>; + + dmas = <&dma 2>, + <&dma 3>; + dma-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt new file mode 100644 index 00000000000..bc03c9312a1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l52.txt @@ -0,0 +1,46 @@ +CS42L52 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l52" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - cirrus,reset-gpio : GPIO controller's phandle and the number + of the GPIO used to reset the codec. + + - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency. + Allowable values of 0x00 through 0x0F. These are raw values written to the + register, not the actual frequency. The frequency is determined by the following. + Frequency = (64xFs)/(N+2) + N = chgfreq_val + Fs = Sample Rate (variable) + + - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured + as a differential input. If not present then the MICA input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured + as a differential input. If not present then the MICB input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin + 0 = 0.5 x VA + 1 = 0.6 x VA + 2 = 0.7 x VA + 3 = 0.8 x VA + 4 = 0.83 x VA + 5 = 0.91 x VA + +Example: + +codec: codec@4a { + compatible = "cirrus,cs42l52"; + reg = <0x4a>; + reset-gpio = <&gpio 10 0>; + cirrus,chgfreq-divisor = <0x05>; + cirrus.mica-differential-cfg; + cirrus,micbias-lvl = <5>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index ed785b3f67b..569b26c4a81 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -4,7 +4,8 @@ Required properties: - compatible : "ti,dm646x-mcasp-audio" : for DM646x platforms "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, TI81xx) + "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) + "ti,dra7-mcasp-audio" : for DRA7xx platforms - reg : Should contain reg specifiers for the entries in the reg-names property. - reg-names : Should contain: @@ -36,7 +37,8 @@ Optional properties: - pinctrl-0: Should specify pin control group used for this controller. - pinctrl-names: Should contain only one value - "default", for more details please refer to pinctrl-bindings.txt - +- fck_parent : Should contain a valid clock name which will be used as parent + for the McASP fck Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt new file mode 100644 index 00000000000..d7b99fa637b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -0,0 +1,50 @@ +Freescale Enhanced Serial Audio Interface (ESAI) Controller + +The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port +for serial communication with a variety of serial devices, including industry +standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and +other DSPs. It has up to six transmitters and four receivers. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-esai". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks: Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock used to access registers + "extal" The esai baud clock for esai controller used to derive + HCK, SCK and FS. + "fsys" The system clock derived from ahb clock used to derive + HCK, SCK and FS. + + - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM]. + + - fsl,esai-synchronous: This is a boolean property. If present, indicating + that ESAI would work in the synchronous mode, which means all the settings + for Receiving would be duplicated from Transmition related registers. + +Example: + +esai: esai@02024000 { + compatible = "fsl,imx35-esai"; + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + clocks = <&clks 208>, <&clks 118>, <&clks 208>; + clock-names = "core", "extal", "fsys"; + dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <128>; + fsl,esai-synchronous; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 4303b6ab620..b93e9a91e30 100644 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs. It can be programmed in AC97, I2S, left-justified, or right-justified modes. Required properties: -- compatible: Compatible list, contains "fsl,ssi". +- compatible: Compatible list, should contain one of the following + compatibles: + fsl,mpc8610-ssi + fsl,imx51-ssi + fsl,imx35-ssi + fsl,imx21-ssi - cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. - reg: Offset and length of the register set for the device. - interrupts: <a b> where a is the interrupt number and b is a diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt new file mode 100644 index 00000000000..98611a6761c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -0,0 +1,40 @@ +Freescale Synchronous Audio Interface (SAI). + +The SAI is based on I2S module that used communicating with audio codecs, +which provides a synchronous audio interface that supports fullduplex +serial interfaces with frame synchronization such as I2S, AC97, TDM, and +codec/DSP interfaces. + + +Required properties: +- compatible: Compatible list, contains "fsl,vf610-sai". +- reg: Offset and length of the register set for the device. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names : Must include the "sai" entry. +- dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names : Two dmas have to be defined, "tx" and "rx". +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See ../pinctrl/pinctrl-bindings.txt for details of the property values. +- big-endian-regs: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + device registers. +- big-endian-data: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + fifo data. + +Example: +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; + big-endian-regs; + big-endian-data; +}; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt new file mode 100644 index 00000000000..31af7bca309 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -0,0 +1,17 @@ +Device-Tree bindings for dummy HDMI codec + +Required properties: + - compatible: should be "linux,hdmi-audio". + +CODEC output pins: + * TX + +CODEC input pins: + * RX + +Example node: + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt new file mode 100644 index 00000000000..e4c8b36dcf8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -0,0 +1,43 @@ +MAX98090 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "maxim,max98090". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Pins on the device (for linking into audio routes): + + * MIC1 + * MIC2 + * DMICL + * DMICR + * IN1 + * IN2 + * IN3 + * IN4 + * IN5 + * IN6 + * IN12 + * IN34 + * IN56 + * HPL + * HPR + * SPKL + * SPKR + * RCVL + * RCVR + * MICBIAS + +Example: + +audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt index 8b8903ef080..57f40f93453 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-alc5632" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt new file mode 100644 index 00000000000..9c7c55c7137 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt @@ -0,0 +1,51 @@ +NVIDIA Tegra audio complex, with MAX98090 CODEC + +Required properties: +- compatible : "nvidia,tegra-audio-max98090" +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the MAX98090's pins (as documented in its binding), and the jacks + on the board: + + * Headphones + * Speakers + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's + connected to the CODEC. +- nvidia,audio-codec : The phandle of the MAX98090 audio codec. + +Optional properties: +- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in + +Example: + +sound { + compatible = "nvidia,tegra-audio-max98090-venice2", + "nvidia,tegra-audio-max98090"; + nvidia,model = "NVIDIA Tegra Venice2"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt index dc6224994d6..7788808dcd0 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC Required properties: - compatible : "nvidia,tegra-audio-rt5640" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt index aab6ce0ad2f..96f6a57dd6b 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8753" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index 4b44dfb6ca0..b795d282818 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8903" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt index ad589b16363..436f6cd9d07 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt @@ -3,10 +3,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm9712" - clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - "pll_a" (The Tegra clock of that name), - "pll_a_out0" (The Tegra clock of that name), - "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt index c1454979c1e..eaf00102d92 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt @@ -4,19 +4,33 @@ Required properties: - compatible : "nvidia,tegra20-ac97" - reg : Should contain AC97 controller registers location and length - interrupts : Should contain AC97 interrupt -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for the AC97 controller +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - ac97 +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number of the GPIO used to reset the external AC97 codec - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number of the GPIO corresponding with the AC97 DAP _FS line + Example: ac97@70002000 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; interrupts = <0 81 0x04>; - nvidia,dma-request-selector = <&apbdma 12>; nvidia,codec-reset-gpio = <&gpio 170 0>; nvidia,codec-sync-gpio = <&gpio 120 0>; + clocks = <&tegra_car 3>; + resets = <&tegra_car 3>; + reset-names = "ac97"; + dmas = <&apbdma 12>, <&apbdma 12>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt index 0df2b5c816e..dc30c6bfbe9 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt @@ -4,8 +4,17 @@ Required properties: - compatible : "nvidia,tegra20-i2s" - reg : Should contain I2S registers location and length - interrupts : Should contain I2S interrupt -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this I2S controller +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -13,5 +22,9 @@ i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = < 45 >; - nvidia,dma-request-selector = < &apbdma 2 >; + clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt index 0e5c12c6652..946e2ac4609 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -7,18 +7,48 @@ Required properties: - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks. - Tegra114 requires an additional entry, for the APBIF2 register block. - interrupts : Should contain AHUB interrupt -- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each - entry contains the Tegra DMA controller's phandle and request selector. - If a single entry is present, the request selectors for the channels are - assumed to be contiguous, and increment from this value. - If multiple values are given, one value must be given per channel. -- clocks : Must contain an entry for each required entry in clock-names. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entries: - - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0, - dam1, dam2, spdif_in. - - Tegra114: Additionally requires amx, adx. + - d_audio + - apbif +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + Tegra30 and later: + - d_audio + - apbif + - i2s0 + - i2s1 + - i2s2 + - i2s3 + - i2s4 + - dam0 + - dam1 + - dam2 + - spdif + Tegra114 and later additionally require: + - amx + - adx + Tegra124 and later additionally require: + - amx1 + - adx1 + - afc0 + - afc1 + - afc2 + - afc3 + - afc4 + - afc5 - ranges : The bus address mapping for the configlink register bus. Can be empty since the mapping is 1:1. +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx0 .. rx<n> + - tx0 .. tx<n> + ... where n is: + Tegra30: 3 + Tegra114, Tegra124: 9 - #address-cells : For the configlink bus. Should be <1>; - #size-cells : For the configlink bus. Should be <1>. @@ -35,13 +65,20 @@ ahub@70080000 { reg = <0x70080000 0x200 0x70080200 0x100>; interrupts = < 0 103 0x04 >; nvidia,dma-request-selector = <&apbdma 1>; - clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, + clocks = <&tegra_car 106>, <&tegra_car 107>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, - <&tegra_car 110>, <&tegra_car 162>; - clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + <&tegra_car 110>, <&tegra_car 10>; + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", "i2s3", "i2s4", "dam0", "dam1", "dam2", - "spdif_in"; + "spdif"; + dmas = <&apbdma 1>, <&apbdma 1>; + <&apbdma 2>, <&apbdma 2>; + <&apbdma 3>, <&apbdma 3>; + <&apbdma 4>, <&apbdma 4>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3"; ranges; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt index dfa6c037124..0c113ffe381 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller Required properties: - compatible : "nvidia,tegra30-i2s" - reg : Should contain I2S registers location and length +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2s - nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. Example: -i2s@70002800 { +i2s@70080300 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car 11>; + resets = <&tegra_car 11>; + reset-names = "i2s"; }; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt new file mode 100644 index 00000000000..e9e20ec67d6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -0,0 +1,77 @@ +Simple-Card: + +Simple-Card specifies audio DAI connection of SoC <-> codec. + +Required properties: + +- compatible : "simple-audio-card" + +Optional properties: + +- simple-audio-card,format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- simple-audio-card,routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. + +Required subnodes: + +- simple-audio-card,cpu : CPU sub-node +- simple-audio-card,codec : CODEC sub-node + +Required CPU/CODEC subnodes properties: + +- sound-dai : phandle and port of CPU/CODEC + +Optional CPU/CODEC subnodes properties: + +- format : CPU/CODEC specific audio format if needed. + see simple-audio-card,format +- frame-master : bool property. add this if subnode is frame master +- bitclock-master : bool property. add this if subnode is bitclock master +- bitclock-inversion : bool property. add this if subnode has clock inversion +- frame-inversion : bool property. add this if subnode has frame inversion +- clocks / system-clock-frequency : specify subnode's clock if needed. + it can be specified via "clocks" if system has + clock node (= common clock), or "system-clock-frequency" + (if system doens't support common clock) + +Example: + +sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-routing = + "MIC_IN", "Mic Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + clocks = <&osc>; + }; +}; + +&i2c0 { + ak4648: ak4648@12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; +}; + +sh_fsi2: sh_fsi2@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 5e6040c2c2e..9d8ea14db49 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -6,6 +6,7 @@ Required properties: - compatible - "string" - One of: "ti,tlv320aic3x" - Generic TLV320AIC3x device + "ti,tlv320aic32x4" - TLV320AIC32x4 "ti,tlv320aic33" - TLV320AIC33 "ti,tlv320aic3007" - TLV320AIC3007 "ti,tlv320aic3106" - TLV320AIC3106 diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index 91ff771c7e7..7ea701e07dc 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -4,10 +4,19 @@ Required properties: - compatible : should be "nvidia,tegra114-spi". - reg: Should contain SPI registers location and length. - interrupts: Should contain SPI interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SPI controller. -- This is also require clock named "spi" as per binding document - Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names : Must include the following entries: + - spi +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. Recommended properties: - spi-max-frequency: Definition as per @@ -18,9 +27,14 @@ spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt index 7b53da5cb75..bdf08e6dec9 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra20-sflash". - reg: Should contain SFLASH registers location and length. - interrupts: Should contain SFLASH interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SFLASH controller. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Recommended properties: - spi-max-frequency: Definition as per @@ -17,10 +26,13 @@ spi@7000c380 { compatible = "nvidia,tegra20-sflash"; reg = <0x7000c380 0x80>; interrupts = <0 39 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 43>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; status = "disabled"; }; - diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt index eefe15e3d95..5db9144a33c 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt @@ -4,8 +4,17 @@ Required properties: - compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". - reg: Should contain SLINK registers location and length. - interrupts: Should contain SLINK interrupts. -- nvidia,dma-request-selector : The Tegra DMA controller's phandle and - request selector for this SLINK controller. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - spi +- dmas : Must contain an entry for each entry in clock-names. + See ../dma/dma.txt for details. +- dma-names : Must include the following entries: + - rx + - tx Recommended properties: - spi-max-frequency: Definition as per @@ -17,10 +26,13 @@ spi@7000d600 { compatible = "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; spi-max-frequency = <25000000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; - diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt deleted file mode 100644 index 6b9e5189669..00000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 SPI device - -Required properties: -- compatible : should be "nvidia,tegra20-spi". -- gpios : should specify GPIOs used for chipselect. diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt deleted file mode 100644 index 1a1b7cfa484..00000000000 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ /dev/null @@ -1,15 +0,0 @@ -Platform DesignWare HS OTG USB 2.0 controller ------------------------------------------------------ - -Required properties: -- compatible : "snps,dwc2" -- reg : Should contain 1 register range (address and length) -- interrupts : Should contain 1 interrupt - -Example: - - usb@101c0000 { - compatible = "ralink,rt3050-usb, snps,dwc2"; - reg = <0x101c0000 40000>; - interrupts = <18>; - }; diff --git a/Documentation/devicetree/bindings/staging/xillybus.txt b/Documentation/devicetree/bindings/staging/xillybus.txt new file mode 100644 index 00000000000..9e316dc2e40 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/xillybus.txt @@ -0,0 +1,20 @@ +* Xillybus driver for generic FPGA interface + +Required properties: +- compatible: Should be "xillybus,xillybus-1.00.a" +- reg: Address and length of the register set for the device +- interrupts: Contains one interrupt node, typically consisting of three cells. +- interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- dma-coherent: Present if DMA operations are coherent + +Example: + + xillybus@ff200400 { + compatible = "xillybus,xillybus-1.00.a"; + reg = < 0xff200400 0x00000080 >; + interrupts = < 0 40 1 >; + interrupt-parent = <&intc>; + } ; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt new file mode 100644 index 00000000000..7c26154b8bb --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -0,0 +1,22 @@ +Allwinner SoCs High Speed Timer Controller + +Required properties: + +- compatible : should be "allwinner,sun5i-a13-hstimer" or + "allwinner,sun7i-a20-hstimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i + one) +- clocks: phandle to the source clock (usually the AHB clock) + +Example: + +timer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 1>, + <0 52 1>, + <0 53 1>, + <0 54 1>; + clocks = <&ahb1_gates 19>; +}; diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt index e019fdc3877..4a864bd10d3 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt @@ -8,6 +8,8 @@ Required properties: - compatible : should be "nvidia,tegra20-timer". - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupts; one per timer channel. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. Example: @@ -18,4 +20,5 @@ timer { 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 132>; }; diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt index 906109d4c59..b5082a1cf46 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt @@ -10,6 +10,8 @@ Required properties: - reg : Specifies base physical address and size of the registers. - interrupts : A list of 6 interrupts; one per each of timer channels 1 through 5, and one for the shared interrupt for the remaining channels. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. timer { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; @@ -20,4 +22,5 @@ timer { 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 214>; }; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index b5a86d20ee3..167d5dab9f6 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -31,38 +31,58 @@ Required properties: 7: .. i: Local Timer Interrupt n -Example 1: In this example, the system uses only the first global timer - interrupt generated by MCT and the remaining three global timer - interrupts are unused. Two local timer interrupts have been - specified. + For MCT block that uses a per-processor interrupt for local timers, such + as ones compatible with "samsung,exynos4412-mct", only one local timer + interrupt might be specified, meaning that all local timers use the same + per processor interrupt. + +Example 1: In this example, the IP contains two local timers, using separate + interrupts, so two local timer interrupts have been specified, + in addition to four global timer interrupts. mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, <0 42 0>, <0 48 0>; }; -Example 2: In this example, the MCT global and local timer interrupts are - connected to two separate interrupt controllers. Hence, an - interrupt-map is created to map the interrupts to the respective - interrupt controllers. +Example 2: In this example, the timer interrupts are connected to two separate + interrupt controllers. Hence, an interrupt-map is created to map + the interrupts to the respective interrupt controllers. mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; + +Example 3: In this example, the IP contains four local timers, but using + a per-processor interrupt to handle them. Either all the local + timer interrupts can be specified, with the same interrupt specifier + value or just the first one. + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + + /* Both ways are possible in this case. Either: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>; + /* or: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index b4b5b7906c8..b4b5b7906c8 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt new file mode 100644 index 00000000000..b8b6871f116 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -0,0 +1,29 @@ +Platform DesignWare HS OTG USB 2.0 controller +----------------------------------------------------- + +Required properties: +- compatible : One of: + - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - snps,dwc2: A generic DWC2 USB controller with default parameters. +- reg : Should contain 1 register range (address and length) +- interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties + +Example: + + usb@101c0000 { + compatible = "ralink,rt3050-usb, snps,dwc2"; + reg = <0x101c0000 40000>; + interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + }; diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt new file mode 100644 index 00000000000..0c5118f7a91 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt @@ -0,0 +1,28 @@ +USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + +The GRUSBDC USB Device Controller core is available in the GRLIB VHDL +IP core library. + +Note: In the ordinary environment for the core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_USBDC" or "01_021" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +- epibufsizes : An array of buffer sizes for IN endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/usb/keystone-phy.txt b/Documentation/devicetree/bindings/usb/keystone-phy.txt new file mode 100644 index 00000000000..f37b3a86341 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-phy.txt @@ -0,0 +1,20 @@ +TI Keystone USB PHY + +Required properties: + - compatible: should be "ti,keystone-usbphy". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the usb phy control register set. + +The main purpose of this PHY driver is to enable the USB PHY reference clock +gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just +an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 +phy node in the USB Glue layer driver node. + +usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt new file mode 100644 index 00000000000..60527d335b5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -0,0 +1,42 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the USB subsystem on + the SOC. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt index df0933043a5..3dc9140e3df 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt @@ -8,7 +8,12 @@ and additions : Required properties : - compatible : Should be "nvidia,tegra20-ehci". - nvidia,phy : phandle of the PHY that the controller is connected to. - - clocks : Contains a single entry which defines the USB controller's clock. + - clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb Optional properties: - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 090e5e22bd2..c495135115c 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -87,6 +87,8 @@ Required properties: e.g. USB3 PHY and SATA PHY on OMAP5. "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on DRA7 platform. + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register for other types. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ce95ed1c6d3..520596da795 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) +amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation @@ -32,12 +33,16 @@ est ESTeem Wireless Modems fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +gmt Global Mixed-mode Technology, Inc. +haoyu Haoyu Microelectronic Co. Ltd. hisilicon Hisilicon Limited. hp Hewlett Packard ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. img Imagination Technologies Ltd. intercontrol Inter Control Group +isl Intersil +lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) marvell Marvell Technology Group Ltd. @@ -71,6 +76,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson ti Texas Instruments +tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz v3 V3 Semiconductor |