diff options
Diffstat (limited to 'Documentation/devicetree')
33 files changed, 901 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt new file mode 100644 index 00000000000..c63097d6afe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt @@ -0,0 +1,65 @@ +* AT91's Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,at91sam9260-adc" + - reg: Should contain ADC registers location and length + - interrupts: Should contain the IRQ line for the ADC + - atmel,adc-channel-base: Offset of the first channel data register + - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this + device + - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC + - atmel,adc-num-channels: Number of channels available in the ADC + - atmel,adc-startup-time: Startup Time of the ADC in microseconds as + defined in the datasheet + - atmel,adc-status-register: Offset of the Interrupt Status Register + - atmel,adc-trigger-register: Offset of the Trigger Register + - atmel,adc-vref: Reference voltage in millivolts for the conversions + +Optional properties: + - atmel,adc-use-external: Boolean to enable of external triggers + +Optional trigger Nodes: + - Required properties: + * trigger-name: Name of the trigger exposed to the user + * trigger-value: Value to put in the Trigger register + to activate this trigger + - Optional properties: + * trigger-external: Is the trigger an external trigger? + +Examples: +adc0: adc@fffb0000 { + compatible = "atmel,at91sam9260-adc"; + reg = <0xfffb0000 0x100>; + interrupts = <20 4>; + atmel,adc-channel-base = <0x30>; + atmel,adc-channels-used = <0xff>; + atmel,adc-drdy-mask = <0x10000>; + atmel,adc-num-channels = <8>; + atmel,adc-startup-time = <40>; + atmel,adc-status-register = <0x1c>; + atmel,adc-trigger-register = <0x08>; + atmel,adc-use-external; + atmel,adc-vref = <3300>; + + trigger@0 { + trigger-name = "external-rising"; + trigger-value = <0x1>; + trigger-external; + }; + trigger@1 { + trigger-name = "external-falling"; + trigger-value = <0x2>; + trigger-external; + }; + + trigger@2 { + trigger-name = "external-any"; + trigger-value = <0x3>; + trigger-external; + }; + + trigger@3 { + trigger-name = "continuous"; + trigger-value = <0x6>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt new file mode 100644 index 00000000000..539adca19e8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt @@ -0,0 +1,38 @@ +* NXP LPC32xx Main Interrupt Controller + (MIC, including SIC1 and SIC2 secondary controllers) + +Required properties: +- compatible: Should be "nxp,lpc3220-mic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: Empty for the interrupt controller itself +- #interrupt-cells: The number of cells to define the interrupts. Should be 2. + The first cell is the IRQ number + The second cell is used to specify mode: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Default for internal sources should be set to 4 (active high). +- reg: Should contain MIC registers location and length + +Examples: + /* + * MIC + */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0x40008000 0xC000>; + }; + + /* + * ADC + */ + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt new file mode 100644 index 00000000000..56ec8ddc4a3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt @@ -0,0 +1,8 @@ +NXP LPC32xx Platforms Device Tree Bindings +------------------------------------------ + +Boards with the NXP LPC32xx SoC shall have the following properties: + +Required root node property: + +compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt new file mode 100644 index 00000000000..80b9a94d9a2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -0,0 +1,40 @@ +* Marvell MMP Interrupt controller + +Required properties: +- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or + "mrvl,mmp2-mux-intc" +- reg : Address and length of the register set of the interrupt controller. + If the interrupt controller is intc, address and length means the range + of the whold interrupt controller. If the interrupt controller is mux-intc, + address and length means one register. Since address of mux-intc is in the + range of intc. mux-intc is secondary interrupt controller. +- reg-names : Name of the register set of the interrupt controller. It's + only required in mux-intc interrupt controller. +- interrupts : Should be the port interrupt shared by mux interrupts. It's + only required in mux-intc interrupt controller. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. +- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt + controller. +- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge + detection first. + +Example: + intc: interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + intcmux4@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index d8de933e9d8..117d741a2e4 100644 --- a/Documentation/devicetree/bindings/arm/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings PXA168 Aspenite Board Required root node properties: - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; + +PXA910 DKB Board +Required root node properties: + - compatible = "mrvl,pxa910-dkb"; + +MMP2 Brownstone Board +Required root node properties: + - compatible = "mrvl,mmp2-brownstone"; diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt b/Documentation/devicetree/bindings/arm/mrvl/timer.txt new file mode 100644 index 00000000000..9a6e251462e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt @@ -0,0 +1,13 @@ +* Marvell MMP Timer controller + +Required properties: +- compatible : Should be "mrvl,mmp-timer". +- reg : Address and length of the register set of timer controller. +- interrupts : Should be the interrupt number. + +Example: + timer0: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <13>; + }; diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index f8e54f09232..aa5f355cc94 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties: Required root node property: compatible = "st,spear600"; + +Boards with the ST SPEAr300 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear300"; + +Boards with the ST SPEAr310 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear310"; + +Boards with the ST SPEAr320 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear320"; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt new file mode 100644 index 00000000000..c25a0a55151 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -0,0 +1,16 @@ +NVIDIA Tegra20 MC(Memory Controller) + +Required properties: +- compatible : "nvidia,tegra20-mc" +- reg : Should contain 2 register ranges(address and length); see the + example below. Note that the MC registers are interleaved with the + GART registers, and hence must be represented as multiple ranges. +- interrupts : Should contain MC General interrupt. + +Example: + mc { + compatible = "nvidia,tegra20-mc"; + reg = <0x7000f000 0x024 + 0x7000f03c 0x3c4>; + interrupts = <0 77 0x04>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt new file mode 100644 index 00000000000..e47e73f612f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt @@ -0,0 +1,18 @@ +NVIDIA Tegra30 MC(Memory Controller) + +Required properties: +- compatible : "nvidia,tegra30-mc" +- reg : Should contain 4 register ranges(address and length); see the + example below. Note that the MC registers are interleaved with the + SMMU registers, and hence must be represented as multiple ranges. +- interrupts : Should contain MC General interrupt. + +Example: + mc { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x010 + 0x7000f03c 0x1b4 + 0x7000f200 0x028 + 0x7000f284 0x17c>; + interrupts = <0 77 0x04>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt new file mode 100644 index 00000000000..ee87467ad8d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt @@ -0,0 +1,31 @@ +Nomadik GPIO controller + +Required properties: +- compatible : Should be "st,nomadik-gpio". +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. +- #gpio-cells : Should be two: + The first cell is the pin number. + The second cell is used to specify optional parameters: + - bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller : Marks the device node as an interrupt controller. +- gpio-bank : Specifies which bank a controller owns. +- st,supports-sleepmode : Specifies whether controller can sleep or not + +Example: + + gpio1: gpio@8012e080 { + compatible = "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + supports-sleepmode; + gpio-bank = <1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 1e34cfe5ebe..05428f39d9a 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -3,19 +3,25 @@ Required properties: - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" - reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all gpio pins, if -- interrupt-name : Should be the name of irq resource. - one number. +- interrupts : Should be the port interrupt shared by all gpio pins. + There're three gpio interrupts in arch-pxa, and they're gpio0, + gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, + gpio_mux. +- interrupt-name : Should be the name of irq resource. Each interrupt + binds its interrupt-name. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + compatible = "mrvl,mmp-gpio"; reg = <0xd4019000 0x1000>; - interrupts = <49>, <17>, <18>; - interrupt-name = "gpio_mux", "gpio0", "gpio1"; + interrupts = <49>; + interrupt-name = "gpio_mux"; gpio-controller; #gpio-cells = <1>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt index 071eb3caae9..b891ee21835 100644 --- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -3,34 +3,31 @@ Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a + - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required as shown in the example below. Recommended properties : - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : the interrupt number - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. + services interrupts for this device. If the parent is the default + interrupt controller in device tree, it could be ignored. - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. Examples: twsi1: i2c@d4011000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; }; twsi2: i2c@d4025000 { - compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; }; diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt new file mode 100644 index 00000000000..fe98ada33ee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/pnx.txt @@ -0,0 +1,36 @@ +* NXP PNX I2C Controller + +Required properties: + + - reg: Offset and length of the register set for the device + - compatible: should be "nxp,pnx-i2c" + - interrupts: configure one interrupt line + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: + + - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz + +Examples: + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&mic>; + interrupts = <50 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt new file mode 100644 index 00000000000..91dfda2e4e1 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bmp085.txt @@ -0,0 +1,20 @@ +BMP085/BMP18x digital pressure sensors + +Required properties: +- compatible: bosch,bmp085 + +Optional properties: +- chip-id: configurable chip id for non-default chip revisions +- temp-measurement-period: temperature measurement period (milliseconds) +- default-oversampling: default oversampling value to be used at startup, + value range is 0-3 with rising sensitivity. + +Example: + +pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + chip-id = <10>; + temp-measurement-period = <100>; + default-oversampling = <2>; +}; diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt new file mode 100644 index 00000000000..b2356b7d2fa --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt @@ -0,0 +1,50 @@ +NAND support for Marvell Orion SoC platforms + +Required properties: +- compatible : "mrvl,orion-nand". +- reg : Base physical address of the NAND and length of memory mapped + region + +Optional properties: +- cle : Address line number connected to CLE. Default is 0 +- ale : Address line number connected to ALE. Default is 1 +- bank-width : Width in bytes of the device. Default is 1 +- chip-delay : Chip dependent delay for transferring data from array to read + registers in usecs + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +nand@f4000000 { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + chip-delay = <25>; + compatible = "mrvl,orion-nand"; + reg = <0xf4000000 0x400>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x200000>; + }; + + partition@300000 { + label = "dtb"; + reg = <0x0300000 0x100000>; + }; + + partition@400000 { + label = "root"; + reg = <0x0400000 0x7d00000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 1ad80d5865a..f31b686d455 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -1,4 +1,4 @@ -Flexcan CAN contoller on Freescale's ARM and PowerPC system-on-a-chip (SOC). +Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). Required properties: diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt new file mode 100644 index 00000000000..585021acd17 --- /dev/null +++ b/Documentation/devicetree/bindings/net/lpc-eth.txt @@ -0,0 +1,24 @@ +* NXP LPC32xx SoC Ethernet Controller + +Required properties: +- compatible: Should be "nxp,lpc-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain ethernet controller interrupt + +Optional properties: +- phy-mode: String, operation mode of the PHY interface. + Supported values are: "mii", "rmii" (default) +- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering +- local-mac-address : 6 bytes, mac address + +Example: + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <29 0>; + + phy-mode = "rmii"; + use-iram; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt new file mode 100644 index 00000000000..3664d37e679 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -0,0 +1,108 @@ +ST Microelectronics, SPEAr pinmux controller + +Required properties: +- compatible : "st,spear300-pinmux" + : "st,spear310-pinmux" + : "st,spear320-pinmux" +- reg : Address range of the pinctrl registers +- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. + - Its values for SPEAr300: + - NAND_MODE : <0> + - NOR_MODE : <1> + - PHOTO_FRAME_MODE : <2> + - LEND_IP_PHONE_MODE : <3> + - HEND_IP_PHONE_MODE : <4> + - LEND_WIFI_PHONE_MODE : <5> + - HEND_WIFI_PHONE_MODE : <6> + - ATA_PABX_WI2S_MODE : <7> + - ATA_PABX_I2S_MODE : <8> + - CAML_LCDW_MODE : <9> + - CAMU_LCD_MODE : <10> + - CAMU_WLCD_MODE : <11> + - CAML_LCD_MODE : <12> + - Its values for SPEAr320: + - AUTO_NET_SMII_MODE : <0> + - AUTO_NET_MII_MODE : <1> + - AUTO_EXP_MODE : <2> + - SMALL_PRINTERS_MODE : <3> + - EXTENDED_MODE : <4> + +Please refer to pinctrl-bindings.txt in this directory for details of the common +pinctrl bindings used by client devices. + +SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each +of these subnodes represents muxing for a pin, a group, or a list of pins or +groups. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Required subnode-properties: +- st,pins : An array of strings. Each string contains the name of a pin or + group. +- st,function: A string containing the name of the function to mux to the pin or + group. See the SPEAr's TRM to determine which are valid for each pin or group. + + Valid values for group and function names can be found from looking at the + group and function arrays in driver files: + drivers/pinctrl/spear/pinctrl-spear3*0.c + +Valid values for group names are: +For All SPEAr3xx machines: + "firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp", + "gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp", + "gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp", + "timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp" + +For SPEAr300 machines: + "fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp", + "clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp", + "dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp", + "gpio1_0_to_3_grp", "gpio1_4_to_7_grp" + +For SPEAr310 machines: + "emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp", + "uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp" + +For SPEAr320 machines: + "clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp", + "sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp", + "uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp", + "uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp", + "uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp", + "uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp", + "uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp", + "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp", + "uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp", + "uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp", + "uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp", + "can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp", + "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp", + "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp", + "pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp", + "pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp", + "pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp", + "pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp", + "ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp", + "ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp", + "ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp", + "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", + "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" + +Valid values for function names are: +For All SPEAr3xx machines: + "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", + "uart0", "timer_0_1", "timer_2_3" + +For SPEAr300 machines: + "fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1" + +For SPEAr310 machines: + "emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0", + "rs485_1", "tdm" + +For SPEAr320 machines: + "clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem", + "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", + "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", + "mii0_1", "i2c1", "i2c2" diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt new file mode 100644 index 00000000000..e4acdd891e4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -0,0 +1,49 @@ +Freescale i.MX audio complex with SGTL5000 codec + +Required properties: +- compatible : "fsl,imx-audio-sgtl5000" +- model : The user-visible name of this sound complex +- ssi-controller : The phandle of the i.MX SSI controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names could be power + supplies, SGTL5000 pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) +- mux-ext-port : The external port of the i.MX audio muxer + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + +sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt new file mode 100644 index 00000000000..601c518edda --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -0,0 +1,17 @@ +* Freescale MXS audio complex with SGTL5000 codec + +Required properties: +- compatible: "fsl,mxs-audio-sgtl5000" +- model: The user-visible name of this sound complex +- saif-controllers: The phandle list of the MXS SAIF controller +- audio-codec: The phandle of the SGTL5000 audio codec + +Example: + +sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; +}; diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt new file mode 100644 index 00000000000..c37ba6143d9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -0,0 +1,36 @@ +* Freescale MXS Serial Audio Interface (SAIF) + +Required properties: +- compatible: Should be "fsl,<chip>-saif" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,saif-dma-channel: APBX DMA channel for the SAIF + +Optional properties: +- fsl,saif-master: phandle to the master SAIF. It's only required for + the slave SAIF. + +Note: Each SAIF controller should have an alias correctly numbered +in "aliases" node. + +Example: + +aliases { + saif0 = &saif0; + saif1 = &saif1; +}; + +saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; +}; + +saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + fsl,saif-master = <&saif0>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt new file mode 100644 index 00000000000..1ac7b164218 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra30 AHUB (Audio Hub) + +Required properties: +- compatible : "nvidia,tegra30-ahub" +- reg : Should contain the register physical address and length for each of + the AHUB's APBIF registers and the AHUB's own registers. +- interrupts : Should contain AHUB interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the first APBIF channel. +- ranges : The bus address mapping for the configlink register bus. + Can be empty since the mapping is 1:1. +- #address-cells : For the configlink bus. Should be <1>; +- #size-cells : For the configlink bus. Should be <1>. + +AHUB client modules need to specify the IDs of their CIFs (Client InterFaces). +For RX CIFs, the numbers indicate the register number within AHUB routing +register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1). +For TX CIFs, the numbers indicate the bit position within the AHUB routing +registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1). + +Example: + +ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 0x70080200 0x100>; + interrupts = < 0 103 0x04 >; + nvidia,dma-request-selector = <&apbdma 1>; + + ranges; + #address-cells = <1>; + #size-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt new file mode 100644 index 00000000000..dfa6c037124 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -0,0 +1,15 @@ +NVIDIA Tegra30 I2S controller + +Required properties: +- compatible : "nvidia,tegra30-i2s" +- reg : Should contain I2S registers location and length +- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback) + first, tx (capture) second. See nvidia,tegra30-ahub.txt for values. + +Example: + +i2s@70002800 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt new file mode 100644 index 00000000000..04b14cfb1f1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt @@ -0,0 +1,14 @@ +NVIDIA Tegra audio complex for TrimSlice + +Required properties: +- compatible : "nvidia,tegra-audio-trimslice" +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8903 audio codec + +Example: + +sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt new file mode 100644 index 00000000000..c4dd39ce616 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt @@ -0,0 +1,54 @@ +NVIDIA Tegra audio complex + +Required properties: +- compatible : "nvidia,tegra-audio-wm8753" +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM8753's pins, and the jacks on the board: + + WM8753 pins: + + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + + Board connectors: + + * Headphone Jack + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller +- nvidia,audio-codec : The phandle of the WM8753 audio codec +Example: + +sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753" + nvidia,model = "tegra-wm8753-harmony"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1"; + + nvidia,i2s-controller = <&i2s1>; + nvidia,audio-codec = <&wm8753>; +}; + diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt new file mode 100644 index 00000000000..b3629d3a9ad --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt @@ -0,0 +1,16 @@ +* NXP LPC32xx SoC ADC controller + +Required properties: +- compatible: must be "nxp,lpc3220-adc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The ADC interrupt + +Example: + + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + }; diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt new file mode 100644 index 00000000000..02ea23a63f2 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt @@ -0,0 +1,26 @@ +* ST SPEAr ADC device driver + +Required properties: +- compatible: Should be "st,spear600-adc" +- reg: Address and length of the register set for the device +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the ADC interrupt +- sampling-frequency: Default sampling frequency + +Optional properties: +- vref-external: External voltage reference in milli-volts. If omitted + the internal voltage reference will be used. +- average-samples: Number of samples to generate an average value. If + omitted, single data conversion will be used. + +Examples: + + adc: adc@d8200000 { + compatible = "st,spear600-adc"; + reg = <0xd8200000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <6>; + sampling-frequency = <5000000>; + vref-external = <2500>; /* 2.5V VRef */ + }; diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt new file mode 100644 index 00000000000..5405d99d9aa --- /dev/null +++ b/Documentation/devicetree/bindings/usb/isp1301.txt @@ -0,0 +1,25 @@ +* NXP ISP1301 USB transceiver + +Required properties: +- compatible: must be "nxp,isp1301" +- reg: I2C address of the ISP1301 device + +Optional properties of devices using ISP1301: +- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the + ISP1301 instance associated with the respective USB driver + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt new file mode 100644 index 00000000000..29f12a533f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt @@ -0,0 +1,28 @@ +* NXP LPC32xx SoC USB Device Controller (UDC) + +Required properties: +- compatible: Must be "nxp,lpc3220-udc" +- reg: Physical base address of the controller and length of memory mapped + region. +- interrupts: The USB interrupts: + * USB Device Low Priority Interrupt + * USB Device High Priority Interrupt + * USB Device DMA Interrupt + * External USB Transceiver Interrupt (OTG ATX) +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +Example: + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + }; diff --git a/Documentation/devicetree/bindings/usb/ohci-nxp.txt b/Documentation/devicetree/bindings/usb/ohci-nxp.txt new file mode 100644 index 00000000000..71e28c1017e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-nxp.txt @@ -0,0 +1,24 @@ +* OHCI controller, NXP ohci-nxp variant + +Required properties: +- compatible: must be "nxp,ohci-nxp" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The OHCI interrupt +- transceiver: phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +Example (LPC32xx): + + isp1301: usb-transceiver@2c { + compatible = "nxp,isp1301"; + reg = <0x2c>; + }; + + ohci@31020000 { + compatible = "nxp,ohci-nxp"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3b 0>; + transceiver = <&isp1301>; + }; diff --git a/Documentation/devicetree/bindings/usb/spear-usb.txt b/Documentation/devicetree/bindings/usb/spear-usb.txt new file mode 100644 index 00000000000..f8a464a2565 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/spear-usb.txt @@ -0,0 +1,39 @@ +ST SPEAr SoC USB controllers: +----------------------------- + +EHCI: +----- + +Required properties: +- compatible: "st,spear600-ehci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the EHCI interrupt + +Example: + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + +OHCI: +----- + +Required properties: +- compatible: "st,spear600-ohci" +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the OHCI interrupt + +Example: + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 82ac057a24a..107d8addf0e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -8,6 +8,7 @@ amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation +bosch Bosch Sensortec GmbH cavium Cavium, Inc. chrp Common Hardware Reference Platform cortina Cortina Systems, Inc. diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt new file mode 100644 index 00000000000..7c7f6887c79 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt @@ -0,0 +1,13 @@ +* NXP PNX watchdog timer + +Required properties: +- compatible: must be "nxp,pnx4008-wdt" +- reg: physical base address of the controller and length of memory mapped + region. + +Example: + + watchdog@4003C000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003C000 0x1000>; + }; |