diff options
Diffstat (limited to 'Documentation/dvb')
| -rw-r--r-- | Documentation/dvb/bt8xx.txt | 64 | ||||
| -rw-r--r-- | Documentation/dvb/cards.txt | 37 | ||||
| -rw-r--r-- | Documentation/dvb/contributors.txt | 17 | ||||
| -rw-r--r-- | Documentation/dvb/get_dvb_firmware | 19 |
4 files changed, 124 insertions, 13 deletions
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index cb63b7a93c8..df6c05453cb 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -1,5 +1,5 @@ -How to get the Nebula, PCTV and Twinhan DST cards working -========================================================= +How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working +========================================================================== This class of cards has a bt878a as the PCI interface, and require the bttv driver. @@ -26,27 +26,31 @@ Furthermore you need to enable In general you need to load the bttv driver, which will handle the gpio and i2c communication for us, plus the common dvb-bt8xx device driver. -The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and -TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. +The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst), +FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded +automatically by the dvb-bt8xx device driver. -3a) Nebula / Pinnacle PCTV --------------------------- +3a) Nebula / Pinnacle PCTV / FusionHDTV Lite +--------------------------------------------- $ modprobe bttv (normally bttv is being loaded automatically by kmod) - $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) + $ modprobe dvb-bt8xx + +(or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan and Clones -------------------------- - $ modprobe bttv i2c_hw=1 card=0x71 + $ modprobe bttv card=0x71 $ modprobe dvb-bt8xx $ modprobe dst The value 0x71 will override the PCI type detection for dvb-bt8xx, -which is necessary for TwinHan cards. +which is necessary for TwinHan cards. Omission of this parameter might result +in a system lockup. -If you're having an older card (blue color circuit) and card=0x71 locks +If you're having an older card (blue color PCB) and card=0x71 locks up your machine, try using 0x68, too. If that does not work, ask on the mailing list. @@ -64,11 +68,47 @@ verbose=0 means complete disabling of messages dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. 0x20 means it has a Conditional Access slot. -The autodected values are determined bythe cards 'response -string' which you can see in your logs e.g. +The autodetected values are determined by the cards 'response string' +which you can see in your logs e.g. dst_get_device_id: Recognise [DSTMCI] +If you need to sent in bug reports on the dst, please do send in a complete +log with the verbose=4 module parameter. For general usage, the default setting +of verbose=1 is ideal. + + +4) Multiple cards +-------------------------- + +If you happen to be running multiple cards, it would be advisable to load +the bttv module with the card id. This would help to solve any module loading +problems that you might face. + +For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite + + $ modprobe bttv card=0x71 card=0x87 + +Here the order of the card id is important and should be the same as that of the +physical order of the cards. Here card=0x71 represents the Twinhan and clones +and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be +specified in decimal, rather than hex: + + $ modprobe bttv card=113 card=135 + +Some examples of card-id's + +Pinnacle Sat 0x5e (94) +Nebula Digi TV 0x68 (104) +PC HDTV 0x70 (112) +Twinhan 0x71 (113) +FusionHDTV DVB-T Lite 0x80 (128) +FusionHDTV5 Lite 0x87 (135) + +For a full list of card-id's, see the V4L Documentation within the kernel +source: linux/Documentation/video4linux/CARDLIST.bttv + +If you have problems with this please do ask on the mailing list. -- Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index efdc4ee9d40..19329cf7b09 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -41,6 +41,12 @@ o Frontends drivers: - dib3000mb : DiBcom 3000-MB demodulator DVB-S/C/T: - dst : TwinHan DST Frontend + ATSC: + - nxt200x : Nxtwave NXT2002 & NXT2004 + - or51211 : or51211 based (pcHDTV HD2000 card) + - or51132 : or51132 based (pcHDTV HD3000 card) + - bcm3510 : Broadcom BCM3510 + - lgdt330x : LG Electronics DT3302 & DT3303 o Cards based on the Phillips saa7146 multimedia PCI bridge chip: @@ -62,6 +68,10 @@ o Cards based on the Conexant Bt8xx PCI bridge: - Nebula Electronics DigiTV - TwinHan DST - Avermedia DVB-T + - ChainTech digitop DST-1000 DVB-S + - pcHDTV HD-2000 TV + - DViCO FusionHDTV DVB-T Lite + - DViCO FusionHDTV5 Lite o Technotrend / Hauppauge DVB USB devices: - Nova USB @@ -83,3 +93,30 @@ o DiBcom DVB-T USB based devices: - DiBcom USB2.0 DVB-T reference device (non-public) o Experimental support for the analog module of the Siemens DVB-C PCI card + +o Cards based on the Conexant cx2388x PCI bridge: + - ADS Tech Instant TV DVB-T PCI + - ATI HDTV Wonder + - digitalnow DNTV Live! DVB-T + - DViCO FusionHDTV DVB-T1 + - DViCO FusionHDTV DVB-T Plus + - DViCO FusionHDTV3 Gold-Q + - DViCO FusionHDTV3 Gold-T + - DViCO FusionHDTV5 Gold + - Hauppauge Nova-T DVB-T + - KWorld/VStream XPert DVB-T + - pcHDTV HD3000 HDTV + - TerraTec Cinergy 1400 DVB-T + - WinFast DTV1000-T + +o Cards based on the Phillips saa7134 PCI bridge: + - Medion 7134 + - Pinnacle PCTV 300i DVB-T + PAL + - LifeView FlyDVB-T DUO + - Typhoon DVB-T Duo Digital/Analog Cardbus + - Philips TOUGH DVB-T reference design + - Philips EUROPA V3 reference design + - Compro Videomate DVB-T300 + - Compro Videomate DVB-T200 + - AVerMedia AVerTVHD MCE A180 + diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index c9d5ce37070..2cbd2d0f6fd 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -75,5 +75,22 @@ Ernst Peinlich <e.peinlich@inode.at> Peter Beutner <p.beutner@gmx.net> for the IR code for the ttusb-dec driver +Wilson Michaels <wilsonmichaels@earthlink.net> + for the lgdt330x frontend driver, and various bugfixes + +Michael Krufky <mkrufky@m1k.net> + for maintaining v4l/dvb inter-tree dependencies + +Taylor Jacob <rtjacob@earthlink.net> + for the nxt2002 frontend driver + +Jean-Francois Thibert <jeanfrancois@sagetv.com> + for the nxt2004 frontend driver + +Kirk Lapray <kirk.lapray@gmail.com> + for the or51211 and or51132 frontend drivers, and + for merging the nxt2002 and nxt2004 modules into a + single nxt200x frontend driver. + (If you think you should be in this list, but you are not, drop a line to the DVB mailing list) diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index a750f0101d9..be6eb4c7599 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -22,7 +22,7 @@ use File::Temp qw/ tempdir /; use IO::Handle; @components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", - "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", + "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb"); # Check args @@ -252,6 +252,23 @@ sub nxt2002 { $outfile; } +sub nxt2004 { + my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip"; + my $url = "http://www.aver.com/support/Drivers/$sourcefile"; + my $hash = "111cb885b1e009188346d72acfed024c"; + my $outfile = "dvb-fe-nxt2004.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + verify("$tmpdir/3xHybrid.sys", $hash); + extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile); + + $outfile; +} + sub or51211 { my $fwfile = "dvb-fe-or51211.fw"; my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; |