diff options
Diffstat (limited to 'Documentation/hwmon/abituguru')
| -rw-r--r-- | Documentation/hwmon/abituguru | 31 |
1 files changed, 18 insertions, 13 deletions
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index b2c0d61b39a..87ffa0f5ec7 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -2,7 +2,7 @@ Kernel driver abituguru ======================= Supported chips: - * Abit uGuru revision 1-3 (Hardware Monitor part only) + * Abit uGuru revision 1 & 2 (Hardware Monitor part only) Prefix: 'abituguru' Addresses scanned: ISA 0x0E0 Datasheet: Not available, this driver is based on reverse engineering. @@ -20,8 +20,8 @@ Supported chips: uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty) uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) - uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8) - uGuru 4.xxxxx? (AT8 32X) (2) + uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, + AW9D-MAX) (2) 1) For revisions 2 and 3 uGuru's the driver can autodetect the sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's this doesnot always work. For these uGuru's the autodection can @@ -30,8 +30,9 @@ Supported chips: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards fan_sensors=5 - 2) The current version of the abituguru driver is known to NOT work - on these Motherboards + 2) There is a seperate abituguru3 driver for these motherboards, + the abituguru (without the 3 !) driver will not work on these + motherboards (and visa versa)! Authors: Hans de Goede <j.w.r.degoede@hhs.nl>, @@ -43,8 +44,10 @@ Module Parameters ----------------- * force: bool Force detection. Note this parameter only causes the - detection to be skipped, if the uGuru can't be read - the module initialization (insmod) will still fail. + detection to be skipped, and thus the insmod to + succeed. If the uGuru can't be read the actual hwmon + driver will not load and thus no hwmon device will get + registered. * bank1_types: int[] Bank1 sensortype autodetection override: -1 autodetect (default) 0 volt sensor @@ -69,13 +72,15 @@ dmesg | grep abituguru Description ----------- -This driver supports the hardware monitoring features of the Abit uGuru chip -found on Abit uGuru featuring motherboards (most modern Abit motherboards). +This driver supports the hardware monitoring features of the first and +second revision of the Abit uGuru chip found on Abit uGuru featuring +motherboards (most modern Abit motherboards). -The uGuru chip in reality is a Winbond W83L950D in disguise (despite Abit -claiming it is "a new microprocessor designed by the ABIT Engineers"). -Unfortunatly this doesn't help since the W83L950D is a generic -microcontroller with a custom Abit application running on it. +The first and second revision of the uGuru chip in reality is a Winbond +W83L950D in disguise (despite Abit claiming it is "a new microprocessor +designed by the ABIT Engineers"). Unfortunatly this doesn't help since the +W83L950D is a generic microcontroller with a custom Abit application running +on it. Despite Abit not releasing any information regarding the uGuru, Olle Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part |