diff options
Diffstat (limited to 'Documentation/hwmon/adm1275')
| -rw-r--r-- | Documentation/hwmon/adm1275 | 32 |
1 files changed, 24 insertions, 8 deletions
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index ab70d96d2df..2cfa2566712 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -2,6 +2,10 @@ Kernel driver adm1275 ===================== Supported chips: + * Analog Devices ADM1075 + Prefix: 'adm1075' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf * Analog Devices ADM1275 Prefix: 'adm1275' Addresses scanned: - @@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com> Description ----------- -This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276 -Hot-Swap Controller and Digital Power Monitor. +This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, +and ADM1276 Hot-Swap Controller and Digital Power Monitor. -ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be -removed from or inserted into a live backplane. They also feature current and -voltage readback via an integrated 12-bit analog-to-digital converter (ADC), -accessed using a PMBus interface. +ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit +board to be removed from or inserted into a live backplane. They also feature +current and voltage readback via an integrated 12-bit analog-to-digital +converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. +The ADM1075, unlike many other PMBus devices, does not support internal voltage +or current scaling. Reported voltages, currents, and power are raw measurements, +and will typically have to be scaled. + Platform data support --------------------- @@ -51,9 +59,10 @@ The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and - configuration. + configuration. On ADM1075, vout1 reports the voltage on + the VAUX pin. in1_input Measured voltage. -in1_min Minumum Voltage. +in1_min Minimum Voltage. in1_max Maximum voltage. in1_min_alarm Voltage low alarm. in1_max_alarm Voltage high alarm. @@ -74,3 +83,10 @@ curr1_crit Critical maximum current. Depending on the chip curr1_crit_alarm Critical current high alarm. curr1_highest Historical maximum current. curr1_reset_history Write any value to reset history. + +power1_label "pin1" +power1_input Input power. +power1_reset_history Write any value to reset history. + + Power attributes are supported on ADM1075 and ADM1276 + only. |