summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/pmbus
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/pmbus')
-rw-r--r--Documentation/hwmon/pmbus40
1 files changed, 11 insertions, 29 deletions
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index f2d42e8bdf4..5e462fc7f99 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -13,26 +13,6 @@ Supported chips:
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
- * Maxim MAX16064
- Quad Power-Supply Controller
- Prefix: 'max16064'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
- * Maxim MAX34440
- PMBus 6-Channel Power-Supply Manager
- Prefixes: 'max34440'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
- * Maxim MAX34441
- PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
- Prefixes: 'max34441'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
- * Maxim MAX8688
- Digital Power-Supply Controller/Monitor
- Prefix: 'max8688'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
@@ -150,11 +130,11 @@ The following attributes are supported. Limits are read-write; all other
attributes are read-only.
inX_input Measured voltage. From READ_VIN or READ_VOUT register.
-inX_min Minumum Voltage.
+inX_min Minimum Voltage.
From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
inX_max Maximum voltage.
From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
-inX_lcrit Critical minumum Voltage.
+inX_lcrit Critical minimum Voltage.
From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
inX_crit Critical maximum voltage.
From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
@@ -169,17 +149,19 @@ inX_label "vin", "vcap", or "voutY"
currX_input Measured current. From READ_IIN or READ_IOUT register.
currX_max Maximum current.
From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
-currX_lcrit Critical minumum output current.
+currX_lcrit Critical minimum output current.
From IOUT_UC_FAULT_LIMIT register.
currX_crit Critical maximum current.
From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
currX_alarm Current high alarm.
From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm Current high alarm.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
currX_lcrit_alarm Output current critical low alarm.
From IOUT_UC_FAULT status.
currX_crit_alarm Current critical high alarm.
From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label "iin" or "vinY"
+currX_label "iin" or "ioutY"
powerX_input Measured power. From READ_PIN or READ_POUT register.
powerX_cap Output power cap. From POUT_MAX register.
@@ -193,13 +175,13 @@ powerX_crit_alarm Output power critical high alarm.
From POUT_OP_FAULT status.
powerX_label "pin" or "poutY"
-tempX_input Measured tempererature.
+tempX_input Measured temperature.
From READ_TEMPERATURE_X register.
-tempX_min Mimimum tempererature. From UT_WARN_LIMIT register.
-tempX_max Maximum tempererature. From OT_WARN_LIMIT register.
-tempX_lcrit Critical low tempererature.
+tempX_min Mimimum temperature. From UT_WARN_LIMIT register.
+tempX_max Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit Critical low temperature.
From UT_FAULT_LIMIT register.
-tempX_crit Critical high tempererature.
+tempX_crit Critical high temperature.
From OT_FAULT_LIMIT register.
tempX_min_alarm Chip temperature low alarm. Set by comparing
READ_TEMPERATURE_X with UT_WARN_LIMIT if