summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/zl6100
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/zl6100')
-rw-r--r--Documentation/hwmon/zl610026
1 files changed, 16 insertions, 10 deletions
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 51f76a189fe..a995b41724f 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -34,6 +34,14 @@ Supported chips:
Prefix: 'zl6105'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+ * Intersil / Zilker Labs ZL9101M
+ Prefix: 'zl9101'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
+ * Intersil / Zilker Labs ZL9117M
+ Prefix: 'zl9117'
+ Addresses scanned: -
+ Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
* Ericsson BMR450, BMR451
Prefix: 'bmr450', 'bmr451'
Addresses scanned: -
@@ -88,14 +96,12 @@ Module parameters
delay
-----
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
Sysfs entries
@@ -108,7 +114,7 @@ in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
-in1_lcrit Critical minumum input voltage.
+in1_lcrit Critical minimum input voltage.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
@@ -117,7 +123,7 @@ in1_crit_alarm Input voltage critical high alarm.
in2_label "vout1"
in2_input Measured output voltage.
-in2_lcrit Critical minumum output Voltage.
+in2_lcrit Critical minimum output Voltage.
in2_crit Critical maximum output voltage.
in2_lcrit_alarm Critical output voltage critical low alarm.
in2_crit_alarm Critical output voltage critical high alarm.