diff options
Diffstat (limited to 'Documentation/hwmon/zl6100')
| -rw-r--r-- | Documentation/hwmon/zl6100 | 26 |
1 files changed, 16 insertions, 10 deletions
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 51f76a189fe..a995b41724f 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -34,6 +34,14 @@ Supported chips: Prefix: 'zl6105' Addresses scanned: - Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + * Intersil / Zilker Labs ZL9101M + Prefix: 'zl9101' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + * Intersil / Zilker Labs ZL9117M + Prefix: 'zl9117' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7914.pdf * Ericsson BMR450, BMR451 Prefix: 'bmr450', 'bmr451' Addresses scanned: - @@ -88,14 +96,12 @@ Module parameters delay ----- -Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between -I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though -1 ms appears to be sufficient and has not caused any problems in testing. -The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to -affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms -except for ZL2004 and ZL6105. To enable manual override, the driver provides a -writeable module parameter, 'delay', which can be used to set the interval to -a value between 0 and 65,535 microseconds. +Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C +bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms +appears to be sufficient and has not caused any problems in testing. The problem +is known to affect all currently supported chips. For manual override, the +driver provides a writeable module parameter, 'delay', which can be used to set +the interval to a value between 0 and 65,535 microseconds. Sysfs entries @@ -108,7 +114,7 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. -in1_lcrit Critical minumum input voltage. +in1_lcrit Critical minimum input voltage. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. @@ -117,7 +123,7 @@ in1_crit_alarm Input voltage critical high alarm. in2_label "vout1" in2_input Measured output voltage. -in2_lcrit Critical minumum output Voltage. +in2_lcrit Critical minimum output Voltage. in2_crit Critical maximum output voltage. in2_lcrit_alarm Critical output voltage critical low alarm. in2_crit_alarm Critical output voltage critical high alarm. |