diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/adm1275 | 32 | ||||
| -rw-r--r-- | Documentation/hwmon/jc42 | 39 | ||||
| -rw-r--r-- | Documentation/hwmon/lm80 | 9 | ||||
| -rw-r--r-- | Documentation/hwmon/max16064 | 4 | ||||
| -rw-r--r-- | Documentation/hwmon/max34440 | 34 | ||||
| -rw-r--r-- | Documentation/hwmon/max8688 | 4 | ||||
| -rw-r--r-- | Documentation/hwmon/pmbus | 9 | ||||
| -rw-r--r-- | Documentation/hwmon/sch5627 | 5 | ||||
| -rw-r--r-- | Documentation/hwmon/sch5636 | 3 | ||||
| -rw-r--r-- | Documentation/hwmon/ucd9000 | 6 | ||||
| -rw-r--r-- | Documentation/hwmon/ucd9200 | 10 | ||||
| -rw-r--r-- | Documentation/hwmon/w83627ehf | 9 | ||||
| -rw-r--r-- | Documentation/hwmon/zl6100 | 26 |
13 files changed, 122 insertions, 68 deletions
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index ab70d96d2df..2cfa2566712 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -2,6 +2,10 @@ Kernel driver adm1275 ===================== Supported chips: + * Analog Devices ADM1075 + Prefix: 'adm1075' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf * Analog Devices ADM1275 Prefix: 'adm1275' Addresses scanned: - @@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com> Description ----------- -This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276 -Hot-Swap Controller and Digital Power Monitor. +This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, +and ADM1276 Hot-Swap Controller and Digital Power Monitor. -ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be -removed from or inserted into a live backplane. They also feature current and -voltage readback via an integrated 12-bit analog-to-digital converter (ADC), -accessed using a PMBus interface. +ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit +board to be removed from or inserted into a live backplane. They also feature +current and voltage readback via an integrated 12-bit analog-to-digital +converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. +The ADM1075, unlike many other PMBus devices, does not support internal voltage +or current scaling. Reported voltages, currents, and power are raw measurements, +and will typically have to be scaled. + Platform data support --------------------- @@ -51,9 +59,10 @@ The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and - configuration. + configuration. On ADM1075, vout1 reports the voltage on + the VAUX pin. in1_input Measured voltage. -in1_min Minumum Voltage. +in1_min Minimum Voltage. in1_max Maximum voltage. in1_min_alarm Voltage low alarm. in1_max_alarm Voltage high alarm. @@ -74,3 +83,10 @@ curr1_crit Critical maximum current. Depending on the chip curr1_crit_alarm Critical current high alarm. curr1_highest Historical maximum current. curr1_reset_history Write any value to reset history. + +power1_label "pin1" +power1_input Input power. +power1_reset_history Write any value to reset history. + + Power attributes are supported on ADM1075 and ADM1276 + only. diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index 52729a756c1..66ecb9fc824 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -3,71 +3,50 @@ Kernel driver jc42 Supported chips: * Analog Devices ADT7408 - Prefix: 'adt7408' - Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf * Atmel AT30TS00 - Prefix: 'at30ts00' - Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.atmel.com/Images/doc8585.pdf * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 - Prefix: 'tse2002', 'ts3000' - Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf * Maxim MAX6604 - Prefix: 'max6604' - Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843 - Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' - Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf - * NXP Semiconductors SE97, SE97B - Prefix: 'se97' - Addresses scanned: I2C 0x18 - 0x1f + * NXP Semiconductors SE97, SE97B, SE98, SE98A Datasheets: http://www.nxp.com/documents/data_sheet/SE97.pdf http://www.nxp.com/documents/data_sheet/SE97B.pdf - * NXP Semiconductors SE98 - Prefix: 'se98' - Addresses scanned: I2C 0x18 - 0x1f - Datasheets: http://www.nxp.com/documents/data_sheet/SE98.pdf + http://www.nxp.com/documents/data_sheet/SE98A.pdf * ON Semiconductor CAT34TS02, CAT6095 - Prefix: 'cat34ts02', 'cat6095' - Addresses scanned: I2C 0x18 - 0x1f Datasheet: http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF - * ST Microelectronics STTS424, STTS424E02 - Prefix: 'stts424' - Addresses scanned: I2C 0x18 - 0x1f - Datasheets: - http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf - http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf - * ST Microelectronics STTS2002, STTS3000 - Prefix: 'stts2002', 'stts3000' - Addresses scanned: I2C 0x18 - 0x1f + * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS3000 Datasheets: + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157556.pdf + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157558.pdf http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf * JEDEC JC 42.4 compliant temperature sensor chips - Prefix: 'jc42' - Addresses scanned: I2C 0x18 - 0x1f Datasheet: http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf + Common for all chips: + Prefix: 'jc42' + Addresses scanned: I2C 0x18 - 0x1f + Author: Guenter Roeck <guenter.roeck@ericsson.com> diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80 index cb5b407ba3e..a60b43efc32 100644 --- a/Documentation/hwmon/lm80 +++ b/Documentation/hwmon/lm80 @@ -7,6 +7,11 @@ Supported chips: Addresses scanned: I2C 0x28 - 0x2f Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ + * National Semiconductor LM96080 + Prefix: 'lm96080' + Addresses scanned: I2C 0x28 - 0x2f + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/ Authors: Frodo Looijaard <frodol@dds.nl>, @@ -17,7 +22,9 @@ Description This driver implements support for the National Semiconductor LM80. It is described as a 'Serial Interface ACPI-Compatible Microprocessor -System Hardware Monitor'. +System Hardware Monitor'. The LM96080 is a more recent incarnation, +it is pin and register compatible, with a few additional features not +yet supported by the driver. The LM80 implements one temperature sensor, two fan rotation speed sensors, seven voltage sensors, alarms, and some miscellaneous stuff. diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index f6e8bcbfacc..f8b478076f6 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -42,9 +42,9 @@ attributes are read-only. in[1-4]_label "vout[1-4]" in[1-4]_input Measured voltage. From READ_VOUT register. -in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 index 8ab51536a1e..04482226db2 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440 @@ -11,6 +11,11 @@ Supported chips: Prefixes: 'max34441' Addresses scanned: - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf + * Maxim MAX34446 + PMBus Power-Supply Data Logger + Prefixes: 'max34446' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf Author: Guenter Roeck <guenter.roeck@ericsson.com> @@ -19,8 +24,8 @@ Description ----------- This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel -Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager -and Intelligent Fan Controller. +Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager +and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -33,6 +38,13 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. +For MAX34446, the value of the currX_crit attribute determines if current or +voltage measurement is enabled for a given channel. Voltage measurement is +enabled if currX_crit is set to 0; current measurement is enabled if the +attribute is set to a positive value. Power measurement is only enabled if +channel 1 (3) is configured for voltage measurement, and channel 2 (4) is +configured for current measurement. + Platform data support --------------------- @@ -48,27 +60,39 @@ attributes are read-only. in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. -in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-6]_lowest Historical minimum voltage. in[1-6]_highest Historical maximum voltage. in[1-6]_reset_history Write any value to reset history. + MAX34446 only supports in[1-4]. + curr[1-6]_label "iout[1-6]". curr[1-6]_input Measured current. From READ_IOUT register. curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. +curr[1-4]_average Historical average current (MAX34446 only). curr[1-6]_highest Historical maximum current. curr[1-6]_reset_history Write any value to reset history. in6 and curr6 attributes only exist for MAX34440. + MAX34446 only supports curr[1-4]. + +power[1,3]_label "pout[1,3]" +power[1,3]_input Measured power. +power[1,3]_average Historical average power. +power[1,3]_highest Historical maximum power. + + Power attributes only exist for MAX34446. temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. temp1 is the chip's internal temperature. temp2..temp5 @@ -79,7 +103,9 @@ temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register. temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register. temp[1-8]_max_alarm Temperature high alarm. temp[1-8]_crit_alarm Temperature critical high alarm. +temp[1-8]_average Historical average temperature (MAX34446 only). temp[1-8]_highest Historical maximum temperature. temp[1-8]_reset_history Write any value to reset history. temp7 and temp8 attributes only exist for MAX34440. + MAX34446 only supports temp[1-3]. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index 71ed10a3c94..fe849871df3 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -42,9 +42,9 @@ attributes are read-only. in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. -in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index d28b591753d..f90f99920cc 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -15,13 +15,20 @@ Supported chips: http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF * Lineage Power - Prefixes: 'pdt003', 'pdt006', 'pdt012', 'udt020' + Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020' Addresses scanned: - Datasheets: http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf + http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf + * Texas Instruments TPS40400, TPS40422 + Prefixes: 'tps40400', 'tps40422' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/tps40400 + http://www.ti.com/lit/gpn/tps40422 * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 index 446a054e491..0551d266c51 100644 --- a/Documentation/hwmon/sch5627 +++ b/Documentation/hwmon/sch5627 @@ -16,6 +16,11 @@ Description SMSC SCH5627 Super I/O chips include complete hardware monitoring capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. +The SMSC SCH5627 hardware monitoring part also contains an integrated +watchdog. In order for this watchdog to function some motherboard specific +initialization most be done by the BIOS, so if the watchdog is not enabled +by the BIOS the sch5627 driver will not register a watchdog device. + The hardware monitoring part of the SMSC SCH5627 is accessed by talking through an embedded microcontroller. An application note describing the protocol for communicating with the microcontroller is available upon diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636 index f83bd1c260f..7b0a01da071 100644 --- a/Documentation/hwmon/sch5636 +++ b/Documentation/hwmon/sch5636 @@ -26,6 +26,9 @@ temperatures. Note that the driver detects how many fan headers / temperature sensors are actually implemented on the motherboard, so you will likely see fewer temperature and fan inputs. +The Fujitsu Theseus hwmon solution also contains an integrated watchdog. +This watchdog is fully supported by the sch5636 driver. + An application note describing the Theseus' registers, as well as an application note describing the protocol for communicating with the microcontroller is available upon request. Please mail me if you want a copy. diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 40ca6db50c4..0df5f276505 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -70,9 +70,9 @@ attributes are read-only. in[1-12]_label "vout[1-12]". in[1-12]_input Measured voltage. From READ_VOUT register. -in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -82,7 +82,7 @@ in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. curr[1-12]_label "iout[1-12]". curr[1-12]_input Measured current. From READ_IOUT register. curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200 index 3c58607f72f..fd7d07b1908 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200 @@ -54,9 +54,9 @@ attributes are read-only. in1_label "vin". in1_input Measured voltage. From READ_VIN register. -in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register. in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status. in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status. @@ -65,9 +65,9 @@ in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status. in[2-5]_label "vout[1-4]". in[2-5]_input Measured voltage. From READ_VOUT register. -in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -80,7 +80,7 @@ curr1_input Measured current. From READ_IIN register. curr[2-5]_label "iout[1-4]". curr[2-5]_input Measured current. From READ_IOUT register. curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index 3f44dbdfda7..ceaf6f652b0 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively as Winbond chips. -The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F), +The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID (except for 627UHG), alarms with beep warnings (control unimplemented), and some automatic fan regulation strategies (plus manual fan control mode). @@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch corresponding fan off. (when the temperature was below defined range). +pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up +pwm[1-4]_step_output- rate of fan speed change (1 - 255) +pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down +pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature + is above defined range. -Note: last two functions are influenced by other control bits, not yet exported +Note: last six functions are influenced by other control bits, not yet exported by the driver, so a change might not have any effect. Implementation Details diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 51f76a189fe..a995b41724f 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -34,6 +34,14 @@ Supported chips: Prefix: 'zl6105' Addresses scanned: - Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + * Intersil / Zilker Labs ZL9101M + Prefix: 'zl9101' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + * Intersil / Zilker Labs ZL9117M + Prefix: 'zl9117' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7914.pdf * Ericsson BMR450, BMR451 Prefix: 'bmr450', 'bmr451' Addresses scanned: - @@ -88,14 +96,12 @@ Module parameters delay ----- -Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between -I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though -1 ms appears to be sufficient and has not caused any problems in testing. -The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to -affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms -except for ZL2004 and ZL6105. To enable manual override, the driver provides a -writeable module parameter, 'delay', which can be used to set the interval to -a value between 0 and 65,535 microseconds. +Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C +bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms +appears to be sufficient and has not caused any problems in testing. The problem +is known to affect all currently supported chips. For manual override, the +driver provides a writeable module parameter, 'delay', which can be used to set +the interval to a value between 0 and 65,535 microseconds. Sysfs entries @@ -108,7 +114,7 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. -in1_lcrit Critical minumum input voltage. +in1_lcrit Critical minimum input voltage. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. @@ -117,7 +123,7 @@ in1_crit_alarm Input voltage critical high alarm. in2_label "vout1" in2_input Measured output voltage. -in2_lcrit Critical minumum output Voltage. +in2_lcrit Critical minimum output Voltage. in2_crit Critical maximum output voltage. in2_lcrit_alarm Critical output voltage critical low alarm. in2_crit_alarm Critical output voltage critical high alarm. |