diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/abituguru | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/abituguru-datasheet | 8 | ||||
| -rw-r--r-- | Documentation/hwmon/abituguru3 | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/ads1015 | 72 | ||||
| -rw-r--r-- | Documentation/hwmon/f71882fg | 19 | ||||
| -rw-r--r-- | Documentation/hwmon/hpfall.c | 146 | ||||
| -rw-r--r-- | Documentation/hwmon/lis3lv02d | 92 | ||||
| -rw-r--r-- | Documentation/hwmon/lm75 | 5 | ||||
| -rw-r--r-- | Documentation/hwmon/max16064 | 62 | ||||
| -rw-r--r-- | Documentation/hwmon/max34440 | 79 | ||||
| -rw-r--r-- | Documentation/hwmon/max8688 | 69 | ||||
| -rw-r--r-- | Documentation/hwmon/pmbus | 40 | ||||
| -rw-r--r-- | Documentation/hwmon/sch5627 | 22 | ||||
| -rw-r--r-- | Documentation/hwmon/smm665 | 8 | ||||
| -rw-r--r-- | Documentation/hwmon/submitting-patches | 109 | ||||
| -rw-r--r-- | Documentation/hwmon/sysfs-interface | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/twl4030-madc-hwmon | 45 | ||||
| -rw-r--r-- | Documentation/hwmon/w83781d | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/w83791d | 2 | ||||
| -rw-r--r-- | Documentation/hwmon/w83795 | 127 |
20 files changed, 633 insertions, 280 deletions
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 5eb3b9d5f0d..915f32063a2 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -78,7 +78,7 @@ motherboards (most modern Abit motherboards). The first and second revision of the uGuru chip in reality is a Winbond W83L950D in disguise (despite Abit claiming it is "a new microprocessor -designed by the ABIT Engineers"). Unfortunatly this doesn't help since the +designed by the ABIT Engineers"). Unfortunately this doesn't help since the W83L950D is a generic microcontroller with a custom Abit application running on it. diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index d9251efdcec..8d2be8a0b1e 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -5,9 +5,9 @@ First of all, what I know about uGuru is no fact based on any help, hints or datasheet from Abit. The data I have got on uGuru have I assembled through my weak knowledge in "backwards engineering". And just for the record, you may have noticed uGuru isn't a chip developed by -Abit, as they claim it to be. It's realy just an microprocessor (uC) created by +Abit, as they claim it to be. It's really just an microprocessor (uC) created by Winbond (W83L950D). And no, reading the manual for this specific uC or -mailing Windbond for help won't give any usefull data about uGuru, as it is +mailing Windbond for help won't give any useful data about uGuru, as it is the program inside the uC that is responding to calls. Olle Sandberg <ollebull@gmail.com>, 2005-05-25 @@ -41,7 +41,7 @@ later on attached again data-port will hold 0x08, more about this later. After wider testing of the Linux kernel driver some variants of the uGuru have turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also -have to test CMD for two different values. On these uGuru's DATA will initally +have to test CMD for two different values. On these uGuru's DATA will initially hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read first! @@ -308,5 +308,5 @@ the voltage / clock programming out, I tried reading and only reading banks resulted in a _permanent_ reprogramming of the voltages, luckily I had the sensors part configured so that it would shutdown my system on any out of spec voltages which proprably safed my computer (after a reboot I managed to -immediatly enter the bios and reload the defaults). This probably means that +immediately enter the bios and reload the defaults). This probably means that the read/write cycle for the non sensor part is different from the sensor part. diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3 index fa598aac22f..a6ccfe4bb6a 100644 --- a/Documentation/hwmon/abituguru3 +++ b/Documentation/hwmon/abituguru3 @@ -47,7 +47,7 @@ This driver supports the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit uGuru featuring motherboards. The 3rd revision of the uGuru chip in reality is a Winbond W83L951G. -Unfortunatly this doesn't help since the W83L951G is a generic microcontroller +Unfortunately this doesn't help since the W83L951G is a generic microcontroller with a custom Abit application running on it. Despite Abit not releasing any information regarding the uGuru revision 3, diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 new file mode 100644 index 00000000000..f6fe9c20373 --- /dev/null +++ b/Documentation/hwmon/ads1015 @@ -0,0 +1,72 @@ +Kernel driver ads1015 +===================== + +Supported chips: + * Texas Instruments ADS1015 + Prefix: 'ads1015' + Datasheet: Publicly available at the Texas Instruments website : + http://focus.ti.com/lit/ds/symlink/ads1015.pdf + +Authors: + Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> + +Description +----------- + +This driver implements support for the Texas Instruments ADS1015. + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +The inputs can be made available by 8 sysfs input files in0_input - in7_input: +in0: Voltage over AIN0 and AIN1. +in1: Voltage over AIN0 and AIN3. +in2: Voltage over AIN1 and AIN3. +in3: Voltage over AIN2 and AIN3. +in4: Voltage over AIN0 and GND. +in5: Voltage over AIN1 and GND. +in6: Voltage over AIN2 and GND. +in7: Voltage over AIN3 and GND. + +Which inputs are available can be configured using platform data or devicetree. + +By default all inputs are exported. + +Platform Data +------------- + +In linux/i2c/ads1015.h platform data is defined, channel_data contains +configuration data for the used input combinations: +- pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V +- data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 + 5: 2400 + 6: 3300 + +Example: +struct ads1015_platform_data data = { + .channel_data = { + [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, + [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, + } +}; + +In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input +(FS +/- 0.512 V, 2400 SPS) would be created. + +Devicetree +---------- + +Configuration is also possible via devicetree: +Documentation/devicetree/bindings/hwmon/ads1015.txt diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index 4d0bc70f185..df02245d141 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -2,6 +2,10 @@ Kernel driver f71882fg ====================== Supported chips: + * Fintek F71808E + Prefix: 'f71808e' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public * Fintek F71858FG Prefix: 'f71858fg' Addresses scanned: none, address read from Super I/O config space @@ -26,10 +30,25 @@ Supported chips: Prefix: 'f71889ed' Addresses scanned: none, address read from Super I/O config space Datasheet: Should become available on the Fintek website soon + * Fintek F71889A + Prefix: 'f71889a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Should become available on the Fintek website soon * Fintek F8000 Prefix: 'f8000' Addresses scanned: none, address read from Super I/O config space Datasheet: Not public + * Fintek F81801U + Prefix: 'f71889fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public + Note: This is the 64-pin variant of the F71889FG, they have the + same device ID and are fully compatible as far as hardware + monitoring is concerned. + * Fintek F81865F + Prefix: 'f81865f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website Author: Hans de Goede <hdegoede@redhat.com> diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c deleted file mode 100644 index a4a8fc5d05d..00000000000 --- a/Documentation/hwmon/hpfall.c +++ /dev/null @@ -1,146 +0,0 @@ -/* Disk protection for HP machines. - * - * Copyright 2008 Eric Piel - * Copyright 2009 Pavel Machek <pavel@ucw.cz> - * - * GPLv2. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <fcntl.h> -#include <sys/stat.h> -#include <sys/types.h> -#include <string.h> -#include <stdint.h> -#include <errno.h> -#include <signal.h> -#include <sys/mman.h> -#include <sched.h> - -char unload_heads_path[64]; - -int set_unload_heads_path(char *device) -{ - char devname[64]; - - if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) - return -EINVAL; - strncpy(devname, device + 5, sizeof(devname)); - - snprintf(unload_heads_path, sizeof(unload_heads_path), - "/sys/block/%s/device/unload_heads", devname); - return 0; -} -int valid_disk(void) -{ - int fd = open(unload_heads_path, O_RDONLY); - if (fd < 0) { - perror(unload_heads_path); - return 0; - } - - close(fd); - return 1; -} - -void write_int(char *path, int i) -{ - char buf[1024]; - int fd = open(path, O_RDWR); - if (fd < 0) { - perror("open"); - exit(1); - } - sprintf(buf, "%d", i); - if (write(fd, buf, strlen(buf)) != strlen(buf)) { - perror("write"); - exit(1); - } - close(fd); -} - -void set_led(int on) -{ - write_int("/sys/class/leds/hp::hddprotect/brightness", on); -} - -void protect(int seconds) -{ - write_int(unload_heads_path, seconds*1000); -} - -int on_ac(void) -{ -// /sys/class/power_supply/AC0/online -} - -int lid_open(void) -{ -// /proc/acpi/button/lid/LID/state -} - -void ignore_me(void) -{ - protect(0); - set_led(0); -} - -int main(int argc, char **argv) -{ - int fd, ret; - struct sched_param param; - - if (argc == 1) - ret = set_unload_heads_path("/dev/sda"); - else if (argc == 2) - ret = set_unload_heads_path(argv[1]); - else - ret = -EINVAL; - - if (ret || !valid_disk()) { - fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n", - argv[0]); - exit(1); - } - - fd = open("/dev/freefall", O_RDONLY); - if (fd < 0) { - perror("/dev/freefall"); - return EXIT_FAILURE; - } - - daemon(0, 0); - param.sched_priority = sched_get_priority_max(SCHED_FIFO); - sched_setscheduler(0, SCHED_FIFO, ¶m); - mlockall(MCL_CURRENT|MCL_FUTURE); - - signal(SIGALRM, ignore_me); - - for (;;) { - unsigned char count; - - ret = read(fd, &count, sizeof(count)); - alarm(0); - if ((ret == -1) && (errno == EINTR)) { - /* Alarm expired, time to unpark the heads */ - continue; - } - - if (ret != sizeof(count)) { - perror("read"); - break; - } - - protect(21); - set_led(1); - if (1 || on_ac() || lid_open()) - alarm(2); - else - alarm(20); - } - - close(fd); - return EXIT_SUCCESS; -} diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d deleted file mode 100644 index 06534f25e64..00000000000 --- a/Documentation/hwmon/lis3lv02d +++ /dev/null @@ -1,92 +0,0 @@ -Kernel driver lis3lv02d -======================= - -Supported chips: - - * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) - * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) - -Authors: - Yan Burman <burman.yan@gmail.com> - Eric Piel <eric.piel@tremplin-utc.net> - - -Description ------------ - -This driver provides support for the accelerometer found in various HP laptops -sporting the feature officially called "HP Mobile Data Protection System 3D" or -"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known -models (full list can be found in drivers/hwmon/hp_accel.c) will have their -axis automatically oriented on standard way (eg: you can directly play -neverball). The accelerometer data is readable via -/sys/devices/platform/lis3lv02d. Reported values are scaled -to mg values (1/1000th of earth gravity). - -Sysfs attributes under /sys/devices/platform/lis3lv02d/: -position - 3D position that the accelerometer reports. Format: "(x,y,z)" -rate - read reports the sampling rate of the accelerometer device in HZ. - write changes sampling rate of the accelerometer device. - Only values which are supported by HW are accepted. -selftest - performs selftest for the chip as specified by chip manufacturer. - -This driver also provides an absolute input class device, allowing -the laptop to act as a pinball machine-esque joystick. Joystick device can be -calibrated. Joystick device can be in two different modes. -By default output values are scaled between -32768 .. 32767. In joystick raw -mode, joystick and sysfs position entry have the same scale. There can be -small difference due to input system fuzziness feature. -Events are also available as input event device. - -Selftest is meant only for hardware diagnostic purposes. It is not meant to be -used during normal operations. Position data is not corrupted during selftest -but interrupt behaviour is not guaranteed to work reliably. In test mode, the -sensing element is internally moved little bit. Selftest measures difference -between normal mode and test mode. Chip specifications tell the acceptance -limit for each type of the chip. Limits are provided via platform data -to allow adjustment of the limits without a change to the actual driver. -Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are -measured difference between modes. Axes are not remapped in selftest mode. -Measurement values are provided to help HW diagnostic applications to make -final decision. - -On HP laptops, if the led infrastructure is activated, support for a led -indicating disk protection will be provided as /sys/class/leds/hp::hddprotect. - -Another feature of the driver is misc device called "freefall" that -acts similar to /dev/rtc and reacts on free-fall interrupts received -from the device. It supports blocking operations, poll/select and -fasync operation modes. You must read 1 bytes from the device. The -result is number of free-fall interrupts since the last successful -read (or 255 if number of interrupts would not fit). See the hpfall.c -file for an example on using the device. - - -Axes orientation ----------------- - -For better compatibility between the various laptops. The values reported by -the accelerometer are converted into a "standard" organisation of the axes -(aka "can play neverball out of the box"): - * When the laptop is horizontal the position reported is about 0 for X and Y - and a positive value for Z - * If the left side is elevated, X increases (becomes positive) - * If the front side (where the touchpad is) is elevated, Y decreases - (becomes negative) - * If the laptop is put upside-down, Z becomes negative - -If your laptop model is not recognized (cf "dmesg"), you can send an -email to the maintainer to add it to the database. When reporting a new -laptop, please include the output of "dmidecode" plus the value of -/sys/devices/platform/lis3lv02d/position in these four cases. - -Q&A ---- - -Q: How do I safely simulate freefall? I have an HP "portable -workstation" which has about 3.5kg and a plastic case, so letting it -fall to the ground is out of question... - -A: The sensor is pretty sensitive, so your hands can do it. Lift it -into free space, follow the fall with your hands for like 10 -centimeters. That should be enough to trigger the detection. diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 8e6356fe05d..a1790401fdd 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -7,6 +7,11 @@ Supported chips: Addresses scanned: I2C 0x48 - 0x4f Datasheet: Publicly available at the National Semiconductor website http://www.national.com/ + * National Semiconductor LM75A + Prefix: 'lm75a' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/ * Dallas Semiconductor DS75 Prefix: 'lm75' Addresses scanned: I2C 0x48 - 0x4f diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 new file mode 100644 index 00000000000..41728999e14 --- /dev/null +++ b/Documentation/hwmon/max16064 @@ -0,0 +1,62 @@ +Kernel driver max16064 +====================== + +Supported chips: + * Maxim MAX16064 + Prefix: 'max16064' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply +Controller with Active-Voltage Output Control and PMBus Interface. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in[1-4]_label "vout[1-4]" +in[1-4]_input Measured voltage. From READ_VOUT register. +in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +temp1_input Measured temperature. From READ_TEMPERATURE_1 register. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 new file mode 100644 index 00000000000..6c525dd07d5 --- /dev/null +++ b/Documentation/hwmon/max34440 @@ -0,0 +1,79 @@ +Kernel driver max34440 +====================== + +Supported chips: + * Maxim MAX34440 + Prefixes: 'max34440' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf + * Maxim MAX34441 + PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller + Prefixes: 'max34441' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel +Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager +and Intelligent Fan Controller. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in[1-6]_label "vout[1-6]". +in[1-6]_input Measured voltage. From READ_VOUT register. +in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +curr[1-6]_label "iout[1-6]". +curr[1-6]_input Measured current. From READ_IOUT register. +curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. +curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. + + in6 and curr6 attributes only exist for MAX34440. + +temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. + temp1 is the chip's internal temperature. temp2..temp5 + are remote I2C temperature sensors. For MAX34441, temp6 + is a remote thermal-diode sensor. For MAX34440, temp6..8 + are remote I2C temperature sensors. +temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register. +temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp[1-8]_max_alarm Temperature high alarm. +temp[1-8]_crit_alarm Temperature critical high alarm. + + temp7 and temp8 attributes only exist for MAX34440. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 new file mode 100644 index 00000000000..0ddd3a41203 --- /dev/null +++ b/Documentation/hwmon/max8688 @@ -0,0 +1,69 @@ +Kernel driver max8688 +===================== + +Supported chips: + * Maxim MAX8688 + Prefix: 'max8688' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + + +Description +----------- + +This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply +Controller/Monitor with PMBus Interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in1_label "vout1" +in1_input Measured voltage. From READ_VOUT register. +in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +curr1_label "iout1" +curr1_input Measured current. From READ_IOUT register. +curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. +curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. + +temp1_input Measured temperature. From READ_TEMPERATURE_1 register. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index f2d42e8bdf4..5e462fc7f99 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -13,26 +13,6 @@ Supported chips: Prefix: 'ltc2978' Addresses scanned: - Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf - * Maxim MAX16064 - Quad Power-Supply Controller - Prefix: 'max16064' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf - * Maxim MAX34440 - PMBus 6-Channel Power-Supply Manager - Prefixes: 'max34440' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf - * Maxim MAX34441 - PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller - Prefixes: 'max34441' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf - * Maxim MAX8688 - Digital Power-Supply Controller/Monitor - Prefix: 'max8688' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - @@ -150,11 +130,11 @@ The following attributes are supported. Limits are read-write; all other attributes are read-only. inX_input Measured voltage. From READ_VIN or READ_VOUT register. -inX_min Minumum Voltage. +inX_min Minimum Voltage. From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. inX_max Maximum voltage. From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register. -inX_lcrit Critical minumum Voltage. +inX_lcrit Critical minimum Voltage. From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register. inX_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register. @@ -169,17 +149,19 @@ inX_label "vin", "vcap", or "voutY" currX_input Measured current. From READ_IIN or READ_IOUT register. currX_max Maximum current. From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register. -currX_lcrit Critical minumum output current. +currX_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. currX_crit Critical maximum current. From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register. currX_alarm Current high alarm. From IIN_OC_WARNING or IOUT_OC_WARNING status. +currX_max_alarm Current high alarm. + From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status. currX_lcrit_alarm Output current critical low alarm. From IOUT_UC_FAULT status. currX_crit_alarm Current critical high alarm. From IIN_OC_FAULT or IOUT_OC_FAULT status. -currX_label "iin" or "vinY" +currX_label "iin" or "ioutY" powerX_input Measured power. From READ_PIN or READ_POUT register. powerX_cap Output power cap. From POUT_MAX register. @@ -193,13 +175,13 @@ powerX_crit_alarm Output power critical high alarm. From POUT_OP_FAULT status. powerX_label "pin" or "poutY" -tempX_input Measured tempererature. +tempX_input Measured temperature. From READ_TEMPERATURE_X register. -tempX_min Mimimum tempererature. From UT_WARN_LIMIT register. -tempX_max Maximum tempererature. From OT_WARN_LIMIT register. -tempX_lcrit Critical low tempererature. +tempX_min Mimimum temperature. From UT_WARN_LIMIT register. +tempX_max Maximum temperature. From OT_WARN_LIMIT register. +tempX_lcrit Critical low temperature. From UT_FAULT_LIMIT register. -tempX_crit Critical high tempererature. +tempX_crit Critical high temperature. From OT_FAULT_LIMIT register. tempX_min_alarm Chip temperature low alarm. Set by comparing READ_TEMPERATURE_X with UT_WARN_LIMIT if diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 new file mode 100644 index 00000000000..446a054e491 --- /dev/null +++ b/Documentation/hwmon/sch5627 @@ -0,0 +1,22 @@ +Kernel driver sch5627 +===================== + +Supported chips: + * SMSC SCH5627 + Prefix: 'sch5627' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Application Note available upon request + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +SMSC SCH5627 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. + +The hardware monitoring part of the SMSC SCH5627 is accessed by talking +through an embedded microcontroller. An application note describing the +protocol for communicating with the microcontroller is available upon +request. Please mail me if you want a copy. diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665 index 3820fc9ca52..59e31614054 100644 --- a/Documentation/hwmon/smm665 +++ b/Documentation/hwmon/smm665 @@ -150,8 +150,8 @@ in8_crit_alarm Channel F critical alarm in9_crit_alarm AIN1 critical alarm in10_crit_alarm AIN2 critical alarm -temp1_input Chip tempererature -temp1_min Mimimum chip tempererature -temp1_max Maximum chip tempererature -temp1_crit Critical chip tempererature +temp1_input Chip temperature +temp1_min Mimimum chip temperature +temp1_max Maximum chip temperature +temp1_crit Critical chip temperature temp1_crit_alarm Temperature critical alarm diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches new file mode 100644 index 00000000000..86f42e8e9e4 --- /dev/null +++ b/Documentation/hwmon/submitting-patches @@ -0,0 +1,109 @@ + How to Get Your Patch Accepted Into the Hwmon Subsystem + ------------------------------------------------------- + +This text is is a collection of suggestions for people writing patches or +drivers for the hwmon subsystem. Following these suggestions will greatly +increase the chances of your change being accepted. + + +1. General +---------- + +* It should be unnecessary to mention, but please read and follow + Documentation/SubmitChecklist + Documentation/SubmittingDrivers + Documentation/SubmittingPatches + Documentation/CodingStyle + +* If your patch generates checkpatch warnings, please refrain from explanations + such as "I don't like that coding style". Keep in mind that each unnecessary + warning helps hiding a real problem. If you don't like the kernel coding + style, don't write kernel drivers. + +* Please test your patch thoroughly. We are not your test group. + Sometimes a patch can not or not completely be tested because of missing + hardware. In such cases, you should test-build the code on at least one + architecture. If run-time testing was not achieved, it should be written + explicitly below the patch header. + +* If your patch (or the driver) is affected by configuration options such as + CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration + variants. + + +2. Adding functionality to existing drivers +------------------------------------------- + +* Make sure the documentation in Documentation/hwmon/<driver_name> is up to + date. + +* Make sure the information in Kconfig is up to date. + +* If the added functionality requires some cleanup or structural changes, split + your patch into a cleanup part and the actual addition. This makes it easier + to review your changes, and to bisect any resulting problems. + +* Never mix bug fixes, cleanup, and functional enhancements in a single patch. + + +3. New drivers +-------------- + +* Running your patch or driver file(s) through checkpatch does not mean its + formatting is clean. If unsure about formatting in your new driver, run it + through Lindent. Lindent is not perfect, and you may have to do some minor + cleanup, but it is a good start. + +* Consider adding yourself to MAINTAINERS. + +* Document the driver in Documentation/hwmon/<driver_name>. + +* Add the driver to Kconfig and Makefile in alphabetical order. + +* Make sure that all dependencies are listed in Kconfig. For new drivers, it + is most likely prudent to add a dependency on EXPERIMENTAL. + +* Avoid forward declarations if you can. Rearrange the code if necessary. + +* Avoid calculations in macros and macro-generated functions. While such macros + may save a line or so in the source, it obfuscates the code and makes code + review more difficult. It may also result in code which is more complicated + than necessary. Use inline functions or just regular functions instead. + +* If the driver has a detect function, make sure it is silent. Debug messages + and messages printed after a successful detection are acceptable, but it + must not print messages such as "Chip XXX not found/supported". + + Keep in mind that the detect function will run for all drivers supporting an + address if a chip is detected on that address. Unnecessary messages will just + pollute the kernel log and not provide any value. + +* Provide a detect function if and only if a chip can be detected reliably. + +* Avoid writing to chip registers in the detect function. If you have to write, + only do it after you have already gathered enough data to be certain that the + detection is going to be successful. + + Keep in mind that the chip might not be what your driver believes it is, and + writing to it might cause a bad misconfiguration. + +* Make sure there are no race conditions in the probe function. Specifically, + completely initialize your chip first, then create sysfs entries and register + with the hwmon subsystem. + +* Do not provide support for deprecated sysfs attributes. + +* Do not create non-standard attributes unless really needed. If you have to use + non-standard attributes, or you believe you do, discuss it on the mailing list + first. Either case, provide a detailed explanation why you need the + non-standard attribute(s). + Standard attributes are specified in Documentation/hwmon/sysfs-interface. + +* When deciding which sysfs attributes to support, look at the chip's + capabilities. While we do not expect your driver to support everything the + chip may offer, it should at least support all limits and alarms. + +* Last but not least, please check if a driver for your chip already exists + before starting to write a new driver. Especially for temperature sensors, + new chips are often variants of previously released chips. In some cases, + a presumably new chip may simply have been relabeled. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 83a698773ad..8f63c244f1a 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -579,7 +579,7 @@ channel should not be trusted. fan[1-*]_fault temp[1-*]_fault Input fault condition - 0: no fault occured + 0: no fault occurred 1: fault condition RO diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon new file mode 100644 index 00000000000..ef7984317ce --- /dev/null +++ b/Documentation/hwmon/twl4030-madc-hwmon @@ -0,0 +1,45 @@ +Kernel driver twl4030-madc +========================= + +Supported chips: + * Texas Instruments TWL4030 + Prefix: 'twl4030-madc' + + +Authors: + J Keerthy <j-keerthy@ti.com> + +Description +----------- + +The Texas Instruments TWL4030 is a Power Management and Audio Circuit. Among +other things it contains a 10-bit A/D converter MADC. The converter has 16 +channels which can be used in different modes. + + +See this table for the meaning of the different channels + +Channel Signal +------------------------------------------ +0 Battery type(BTYPE) +1 BCI: Battery temperature (BTEMP) +2 GP analog input +3 GP analog input +4 GP analog input +5 GP analog input +6 GP analog input +7 GP analog input +8 BCI: VBUS voltage(VBUS) +9 Backup Battery voltage (VBKP) +10 BCI: Battery charger current (ICHG) +11 BCI: Battery charger voltage (VCHG) +12 BCI: Main battery voltage (VBAT) +13 Reserved +14 Reserved +15 VRUSB Supply/Speaker left/Speaker right polarization level + + +The Sysfs nodes will represent the voltage in the units of mV, +the temperature channel shows the converted temperature in +degree celcius. The Battery charging current channel represents +battery charging current in mA. diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d index ecbc1e4574b..129b0a3b555 100644 --- a/Documentation/hwmon/w83781d +++ b/Documentation/hwmon/w83781d @@ -403,7 +403,7 @@ found out the following values do work as a form of coarse pwm: 0x80 - seems to turn fans off after some time(1-2 minutes)... might be some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an -old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan +old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan that was dropped at the BIOS) 0x81 - off 0x82 - slightly "on-ner" than off, but my fans do not get to move. I can diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index 5663e491655..90387c3540f 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -93,7 +93,7 @@ The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple *_beep files as described in .../Documentation/hwmon/sysfs-interface. -A similar change has occured for the bitmap corresponding to the alarms. The +A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap of triggered alarms. The newer method uses multiple sysfs *_alarm files (again following the pattern described in sysfs-interface). diff --git a/Documentation/hwmon/w83795 b/Documentation/hwmon/w83795 new file mode 100644 index 00000000000..9f160371f46 --- /dev/null +++ b/Documentation/hwmon/w83795 @@ -0,0 +1,127 @@ +Kernel driver w83795 +==================== + +Supported chips: + * Winbond/Nuvoton W83795G + Prefix: 'w83795g' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com + * Winbond/Nuvoton W83795ADG + Prefix: 'w83795adg' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Available for download on nuvoton.com + +Authors: + Wei Song (Nuvoton) + Jean Delvare <khali@linux-fr.org> + + +Pin mapping +----------- + +Here is a summary of the pin mapping for the W83795G and W83795ADG. +This can be useful to convert data provided by board manufacturers +into working libsensors configuration statements. + + W83795G | + Pin | Name | Register | Sysfs attribute +------------------------------------------------------------------ + 13 | VSEN1 (VCORE1) | 10h | in0 + 14 | VSEN2 (VCORE2) | 11h | in1 + 15 | VSEN3 (VCORE3) | 12h | in2 + 16 | VSEN4 | 13h | in3 + 17 | VSEN5 | 14h | in4 + 18 | VSEN6 | 15h | in5 + 19 | VSEN7 | 16h | in6 + 20 | VSEN8 | 17h | in7 + 21 | VSEN9 | 18h | in8 + 22 | VSEN10 | 19h | in9 + 23 | VSEN11 | 1Ah | in10 + 28 | VTT | 1Bh | in11 + 24 | 3VDD | 1Ch | in12 + 25 | 3VSB | 1Dh | in13 + 26 | VBAT | 1Eh | in14 + 3 | VSEN12/TR5 | 1Fh | in15/temp5 + 4 | VSEN13/TR5 | 20h | in16/temp6 + 5/ 6 | VDSEN14/TR1/TD1 | 21h | in17/temp1 + 7/ 8 | VDSEN15/TR2/TD2 | 22h | in18/temp2 + 9/ 10 | VDSEN16/TR3/TD3 | 23h | in19/temp3 + 11/ 12 | VDSEN17/TR4/TD4 | 24h | in20/temp4 + 40 | FANIN1 | 2Eh | fan1 + 42 | FANIN2 | 2Fh | fan2 + 44 | FANIN3 | 30h | fan3 + 46 | FANIN4 | 31h | fan4 + 48 | FANIN5 | 32h | fan5 + 50 | FANIN6 | 33h | fan6 + 52 | FANIN7 | 34h | fan7 + 54 | FANIN8 | 35h | fan8 + 57 | FANIN9 | 36h | fan9 + 58 | FANIN10 | 37h | fan10 + 59 | FANIN11 | 38h | fan11 + 60 | FANIN12 | 39h | fan12 + 31 | FANIN13 | 3Ah | fan13 + 35 | FANIN14 | 3Bh | fan14 + 41 | FANCTL1 | 10h (bank 2) | pwm1 + 43 | FANCTL2 | 11h (bank 2) | pwm2 + 45 | FANCTL3 | 12h (bank 2) | pwm3 + 47 | FANCTL4 | 13h (bank 2) | pwm4 + 49 | FANCTL5 | 14h (bank 2) | pwm5 + 51 | FANCTL6 | 15h (bank 2) | pwm6 + 53 | FANCTL7 | 16h (bank 2) | pwm7 + 55 | FANCTL8 | 17h (bank 2) | pwm8 + 29/ 30 | PECI/TSI (DTS1) | 26h | temp7 + 29/ 30 | PECI/TSI (DTS2) | 27h | temp8 + 29/ 30 | PECI/TSI (DTS3) | 28h | temp9 + 29/ 30 | PECI/TSI (DTS4) | 29h | temp10 + 29/ 30 | PECI/TSI (DTS5) | 2Ah | temp11 + 29/ 30 | PECI/TSI (DTS6) | 2Bh | temp12 + 29/ 30 | PECI/TSI (DTS7) | 2Ch | temp13 + 29/ 30 | PECI/TSI (DTS8) | 2Dh | temp14 + 27 | CASEOPEN# | 46h | intrusion0 + + W83795ADG | + Pin | Name | Register | Sysfs attribute +------------------------------------------------------------------ + 10 | VSEN1 (VCORE1) | 10h | in0 + 11 | VSEN2 (VCORE2) | 11h | in1 + 12 | VSEN3 (VCORE3) | 12h | in2 + 13 | VSEN4 | 13h | in3 + 14 | VSEN5 | 14h | in4 + 15 | VSEN6 | 15h | in5 + 16 | VSEN7 | 16h | in6 + 17 | VSEN8 | 17h | in7 + 22 | VTT | 1Bh | in11 + 18 | 3VDD | 1Ch | in12 + 19 | 3VSB | 1Dh | in13 + 20 | VBAT | 1Eh | in14 + 48 | VSEN12/TR5 | 1Fh | in15/temp5 + 1 | VSEN13/TR5 | 20h | in16/temp6 + 2/ 3 | VDSEN14/TR1/TD1 | 21h | in17/temp1 + 4/ 5 | VDSEN15/TR2/TD2 | 22h | in18/temp2 + 6/ 7 | VDSEN16/TR3/TD3 | 23h | in19/temp3 + 8/ 9 | VDSEN17/TR4/TD4 | 24h | in20/temp4 + 32 | FANIN1 | 2Eh | fan1 + 34 | FANIN2 | 2Fh | fan2 + 36 | FANIN3 | 30h | fan3 + 37 | FANIN4 | 31h | fan4 + 38 | FANIN5 | 32h | fan5 + 39 | FANIN6 | 33h | fan6 + 40 | FANIN7 | 34h | fan7 + 41 | FANIN8 | 35h | fan8 + 43 | FANIN9 | 36h | fan9 + 44 | FANIN10 | 37h | fan10 + 45 | FANIN11 | 38h | fan11 + 46 | FANIN12 | 39h | fan12 + 24 | FANIN13 | 3Ah | fan13 + 28 | FANIN14 | 3Bh | fan14 + 33 | FANCTL1 | 10h (bank 2) | pwm1 + 35 | FANCTL2 | 11h (bank 2) | pwm2 + 23 | PECI (DTS1) | 26h | temp7 + 23 | PECI (DTS2) | 27h | temp8 + 23 | PECI (DTS3) | 28h | temp9 + 23 | PECI (DTS4) | 29h | temp10 + 23 | PECI (DTS5) | 2Ah | temp11 + 23 | PECI (DTS6) | 2Bh | temp12 + 23 | PECI (DTS7) | 2Ch | temp13 + 23 | PECI (DTS8) | 2Dh | temp14 + 21 | CASEOPEN# | 46h | intrusion0 |