diff options
Diffstat (limited to 'Documentation/i2c/ten-bit-addresses')
| -rw-r--r-- | Documentation/i2c/ten-bit-addresses | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses new file mode 100644 index 00000000000..200074f8136 --- /dev/null +++ b/Documentation/i2c/ten-bit-addresses @@ -0,0 +1,22 @@ +The I2C protocol knows about two kinds of device addresses: normal 7 bit +addresses, and an extended set of 10 bit addresses. The sets of addresses +do not intersect: the 7 bit address 0x10 is not the same as the 10 bit +address 0x10 (though a single device could respond to both of them). You +select a 10 bit address by adding an extra byte after the address +byte: + S Addr7 Rd/Wr .... +becomes + S 11110 Addr10 Rd/Wr +S is the start bit, Rd/Wr the read/write bit, and if you count the number +of bits, you will see the there are 8 after the S bit for 7 bit addresses, +and 16 after the S bit for 10 bit addresses. + +WARNING! The current 10 bit address support is EXPERIMENTAL. There are +several places in the code that will cause SEVERE PROBLEMS with 10 bit +addresses, even though there is some basic handling and hooks. Also, +almost no supported adapter handles the 10 bit addresses correctly. + +As soon as a real 10 bit address device is spotted 'in the wild', we +can and will add proper support. Right now, 10 bit address devices +are defined by the I2C protocol, but we have never seen a single device +which supports them. |