summaryrefslogtreecommitdiffstats
path: root/Documentation/kbuild/kconfig-language.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/kbuild/kconfig-language.txt')
-rw-r--r--Documentation/kbuild/kconfig-language.txt282
1 files changed, 282 insertions, 0 deletions
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
new file mode 100644
index 00000000000..ca1967f3642
--- /dev/null
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -0,0 +1,282 @@
+Introduction
+------------
+
+The configuration database is collection of configuration options
+organized in a tree structure:
+
+ +- Code maturity level options
+ | +- Prompt for development and/or incomplete code/drivers
+ +- General setup
+ | +- Networking support
+ | +- System V IPC
+ | +- BSD Process Accounting
+ | +- Sysctl support
+ +- Loadable module support
+ | +- Enable loadable module support
+ | +- Set version information on all module symbols
+ | +- Kernel module loader
+ +- ...
+
+Every entry has its own dependencies. These dependencies are used
+to determine the visibility of an entry. Any child entry is only
+visible if its parent entry is also visible.
+
+Menu entries
+------------
+
+Most entries define a config option, all other entries help to organize
+them. A single configuration option is defined like this:
+
+config MODVERSIONS
+ bool "Set version information on all module symbols"
+ depends MODULES
+ help
+ Usually, modules have to be recompiled whenever you switch to a new
+ kernel. ...
+
+Every line starts with a key word and can be followed by multiple
+arguments. "config" starts a new config entry. The following lines
+define attributes for this config option. Attributes can be the type of
+the config option, input prompt, dependencies, help text and default
+values. A config option can be defined multiple times with the same
+name, but every definition can have only a single input prompt and the
+type must not conflict.
+
+Menu attributes
+---------------
+
+A menu entry can have a number of attributes. Not all of them are
+applicable everywhere (see syntax).
+
+- type definition: "bool"/"tristate"/"string"/"hex"/"int"
+ Every config option must have a type. There are only two basic types:
+ tristate and string, the other types are based on these two. The type
+ definition optionally accepts an input prompt, so these two examples
+ are equivalent:
+
+ bool "Networking support"
+ and
+ bool
+ prompt "Networking support"
+
+- input prompt: "prompt" <prompt> ["if" <expr>]
+ Every menu entry can have at most one prompt, which is used to display
+ to the user. Optionally dependencies only for this prompt can be added
+ with "if".
+
+- default value: "default" <expr> ["if" <expr>]
+ A config option can have any number of default values. If multiple
+ default values are visible, only the first defined one is active.
+ Default values are not limited to the menu entry, where they are
+ defined, this means the default can be defined somewhere else or be
+ overridden by an earlier definition.
+ The default value is only assigned to the config symbol if no other
+ value was set by the user (via the input prompt above). If an input
+ prompt is visible the default value is presented to the user and can
+ be overridden by him.
+ Optionally dependencies only for this default value can be added with
+ "if".
+
+- dependencies: "depends on"/"requires" <expr>
+ This defines a dependency for this menu entry. If multiple
+ dependencies are defined they are connected with '&&'. Dependencies
+ are applied to all other options within this menu entry (which also
+ accept an "if" expression), so these two examples are equivalent:
+
+ bool "foo" if BAR
+ default y if BAR
+ and
+ depends on BAR
+ bool "foo"
+ default y
+
+- reverse dependencies: "select" <symbol> ["if" <expr>]
+ While normal dependencies reduce the upper limit of a symbol (see
+ below), reverse dependencies can be used to force a lower limit of
+ another symbol. The value of the current menu symbol is used as the
+ minimal value <symbol> can be set to. If <symbol> is selected multiple
+ times, the limit is set to the largest selection.
+ Reverse dependencies can only be used with boolean or tristate
+ symbols.
+
+- numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
+ This allows to limit the range of possible input values for int
+ and hex symbols. The user can only input a value which is larger than
+ or equal to the first symbol and smaller than or equal to the second
+ symbol.
+
+- help text: "help" or "---help---"
+ This defines a help text. The end of the help text is determined by
+ the indentation level, this means it ends at the first line which has
+ a smaller indentation than the first line of the help text.
+ "---help---" and "help" do not differ in behaviour, "---help---" is
+ used to help visually seperate configuration logic from help within
+ the file as an aid to developers.
+
+
+Menu dependencies
+-----------------
+
+Dependencies define the visibility of a menu entry and can also reduce
+the input range of tristate symbols. The tristate logic used in the
+expressions uses one more state than normal boolean logic to express the
+module state. Dependency expressions have the following syntax:
+
+<expr> ::= <symbol> (1)
+ <symbol> '=' <symbol> (2)
+ <symbol> '!=' <symbol> (3)
+ '(' <expr> ')' (4)
+ '!' <expr> (5)
+ <expr> '&&' <expr> (6)
+ <expr> '||' <expr> (7)
+
+Expressions are listed in decreasing order of precedence.
+
+(1) Convert the symbol into an expression. Boolean and tristate symbols
+ are simply converted into the respective expression values. All
+ other symbol types result in 'n'.
+(2) If the values of both symbols are equal, it returns 'y',
+ otherwise 'n'.
+(3) If the values of both symbols are equal, it returns 'n',
+ otherwise 'y'.
+(4) Returns the value of the expression. Used to override precedence.
+(5) Returns the result of (2-/expr/).
+(6) Returns the result of min(/expr/, /expr/).
+(7) Returns the result of max(/expr/, /expr/).
+
+An expression can have a value of 'n', 'm' or 'y' (or 0, 1, 2
+respectively for calculations). A menu entry becomes visible when it's
+expression evaluates to 'm' or 'y'.
+
+There are two types of symbols: constant and nonconstant symbols.
+Nonconstant symbols are the most common ones and are defined with the
+'config' statement. Nonconstant symbols consist entirely of alphanumeric
+characters or underscores.
+Constant symbols are only part of expressions. Constant symbols are
+always surrounded by single or double quotes. Within the quote any
+other character is allowed and the quotes can be escaped using '\'.
+
+Menu structure
+--------------
+
+The position of a menu entry in the tree is determined in two ways. First
+it can be specified explicitly:
+
+menu "Network device support"
+ depends NET
+
+config NETDEVICES
+ ...
+
+endmenu
+
+All entries within the "menu" ... "endmenu" block become a submenu of
+"Network device support". All subentries inherit the dependencies from
+the menu entry, e.g. this means the dependency "NET" is added to the
+dependency list of the config option NETDEVICES.
+
+The other way to generate the menu structure is done by analyzing the
+dependencies. If a menu entry somehow depends on the previous entry, it
+can be made a submenu of it. First, the previous (parent) symbol must
+be part of the dependency list and then one of these two conditions
+must be true:
+- the child entry must become invisible, if the parent is set to 'n'
+- the child entry must only be visible, if the parent is visible
+
+config MODULES
+ bool "Enable loadable module support"
+
+config MODVERSIONS
+ bool "Set version information on all module symbols"
+ depends MODULES
+
+comment "module support disabled"
+ depends !MODULES
+
+MODVERSIONS directly depends on MODULES, this means it's only visible if
+MODULES is different from 'n'. The comment on the other hand is always
+visible when MODULES is visible (the (empty) dependency of MODULES is
+also part of the comment dependencies).
+
+
+Kconfig syntax
+--------------
+
+The configuration file describes a series of menu entries, where every
+line starts with a keyword (except help texts). The following keywords
+end a menu entry:
+- config
+- menuconfig
+- choice/endchoice
+- comment
+- menu/endmenu
+- if/endif
+- source
+The first five also start the definition of a menu entry.
+
+config:
+
+ "config" <symbol>
+ <config options>
+
+This defines a config symbol <symbol> and accepts any of above
+attributes as options.
+
+menuconfig:
+ "menuconfig" <symbol>
+ <config options>
+
+This is similiar to the simple config entry above, but it also gives a
+hint to front ends, that all suboptions should be displayed as a
+separate list of options.
+
+choices:
+
+ "choice"
+ <choice options>
+ <choice block>
+ "endchoice"
+
+This defines a choice group and accepts any of above attributes as
+options. A choice can only be of type bool or tristate, while a boolean
+choice only allows a single config entry to be selected, a tristate
+choice also allows any number of config entries to be set to 'm'. This
+can be used if multiple drivers for a single hardware exists and only a
+single driver can be compiled/loaded into the kernel, but all drivers
+can be compiled as modules.
+A choice accepts another option "optional", which allows to set the
+choice to 'n' and no entry needs to be selected.
+
+comment:
+
+ "comment" <prompt>
+ <comment options>
+
+This defines a comment which is displayed to the user during the
+configuration process and is also echoed to the output files. The only
+possible options are dependencies.
+
+menu:
+
+ "menu" <prompt>
+ <menu options>
+ <menu block>
+ "endmenu"
+
+This defines a menu block, see "Menu structure" above for more
+information. The only possible options are dependencies.
+
+if:
+
+ "if" <expr>
+ <if block>
+ "endif"
+
+This defines an if block. The dependency expression <expr> is appended
+to all enclosed menu entries.
+
+source:
+
+ "source" <prompt>
+
+This reads the specified configuration file. This file is always parsed.