1 files changed, 88 insertions, 3 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1601e5a8b7..0e90453e4ac 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2161,6 +2161,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				on: Turn realloc on
 		realloc		same as realloc=on
 		noari		do not use PCIe ARI.
+		pcie_scan_all	Scan all possible PCIe devices.  Otherwise we
+				only look for one device below a PCIe downstream
+				port.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -2330,18 +2333,100 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
 			See Documentation/blockdev/ramdisk.txt.
 
-	rcupdate.blimit=	[KNL,BOOT]
+	rcutree.blimit=	[KNL,BOOT]
 			Set maximum number of finished RCU callbacks to process
 			in one batch.
 
-	rcupdate.qhimark=	[KNL,BOOT]
+	rcutree.qhimark=	[KNL,BOOT]
 			Set threshold of queued
 			RCU callbacks over which batch limiting is disabled.
 
-	rcupdate.qlowmark=	[KNL,BOOT]
+	rcutree.qlowmark=	[KNL,BOOT]
 			Set threshold of queued RCU callbacks below which
 			batch limiting is re-enabled.
 
+	rcutree.rcu_cpu_stall_suppress=	[KNL,BOOT]
+			Suppress RCU CPU stall warning messages.
+
+	rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
+			Set timeout for RCU CPU stall warning messages.
+
+	rcutorture.fqs_duration= [KNL,BOOT]
+			Set duration of force_quiescent_state bursts.
+
+	rcutorture.fqs_holdoff= [KNL,BOOT]
+			Set holdoff time within force_quiescent_state bursts.
+
+	rcutorture.fqs_stutter= [KNL,BOOT]
+			Set wait time between force_quiescent_state bursts.
+
+	rcutorture.irqreader= [KNL,BOOT]
+			Test RCU readers from irq handlers.
+
+	rcutorture.n_barrier_cbs= [KNL,BOOT]
+			Set callbacks/threads for rcu_barrier() testing.
+
+	rcutorture.nfakewriters= [KNL,BOOT]
+			Set number of concurrent RCU writers.  These just
+			stress RCU, they don't participate in the actual
+			test, hence the "fake".
+
+	rcutorture.nreaders= [KNL,BOOT]
+			Set number of RCU readers.
+
+	rcutorture.onoff_holdoff= [KNL,BOOT]
+			Set time (s) after boot for CPU-hotplug testing.
+
+	rcutorture.onoff_interval= [KNL,BOOT]
+			Set time (s) between CPU-hotplug operations, or
+			zero to disable CPU-hotplug testing.
+
+	rcutorture.shuffle_interval= [KNL,BOOT]
+			Set task-shuffle interval (s).  Shuffling tasks
+			allows some CPUs to go into dyntick-idle mode
+			during the rcutorture test.
+
+	rcutorture.shutdown_secs= [KNL,BOOT]
+			Set time (s) after boot system shutdown.  This
+			is useful for hands-off automated testing.
+
+	rcutorture.stall_cpu= [KNL,BOOT]
+			Duration of CPU stall (s) to test RCU CPU stall
+			warnings, zero to disable.
+
+	rcutorture.stall_cpu_holdoff= [KNL,BOOT]
+			Time to wait (s) after boot before inducing stall.
+
+	rcutorture.stat_interval= [KNL,BOOT]
+			Time (s) between statistics printk()s.
+
+	rcutorture.stutter= [KNL,BOOT]
+			Time (s) to stutter testing, for example, specifying
+			five seconds causes the test to run for five seconds,
+			wait for five seconds, and so on.  This tests RCU's
+			ability to transition abruptly to and from idle.
+
+	rcutorture.test_boost= [KNL,BOOT]
+			Test RCU priority boosting?  0=no, 1=maybe, 2=yes.
+			"Maybe" means test if the RCU implementation
+			under test support RCU priority boosting.
+
+	rcutorture.test_boost_duration= [KNL,BOOT]
+			Duration (s) of each individual boost test.
+
+	rcutorture.test_boost_interval= [KNL,BOOT]
+			Interval (s) between each boost test.
+
+	rcutorture.test_no_idle_hz= [KNL,BOOT]
+			Test RCU's dyntick-idle handling.  See also the
+			rcutorture.shuffle_interval parameter.
+
+	rcutorture.torture_type= [KNL,BOOT]
+			Specify the RCU implementation to test.
+
+	rcutorture.verbose= [KNL,BOOT]
+			Enable additional printk() statements.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,