summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/ip-sysctl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/ip-sysctl.txt')
-rw-r--r--Documentation/networking/ip-sysctl.txt65
1 files changed, 63 insertions, 2 deletions
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8a984e994e6..ab42c95f998 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -15,17 +15,47 @@ ip_default_ttl - INTEGER
forwarded) IP packets. Should be between 1 and 255 inclusive.
Default: 64 (as recommended by RFC1700)
-ip_no_pmtu_disc - BOOLEAN
- Disable Path MTU Discovery. If enabled and a
+ip_no_pmtu_disc - INTEGER
+ Disable Path MTU Discovery. If enabled in mode 1 and a
fragmentation-required ICMP is received, the PMTU to this
destination will be set to min_pmtu (see below). You will need
to raise min_pmtu to the smallest interface MTU on your system
manually if you want to avoid locally generated fragments.
+
+ In mode 2 incoming Path MTU Discovery messages will be
+ discarded. Outgoing frames are handled the same as in mode 1,
+ implicitly setting IP_PMTUDISC_DONT on every created socket.
+
+ Mode 3 is a hardend pmtu discover mode. The kernel will only
+ accept fragmentation-needed errors if the underlying protocol
+ can verify them besides a plain socket lookup. Current
+ protocols for which pmtu events will be honored are TCP, SCTP
+ and DCCP as they verify e.g. the sequence number or the
+ association. This mode should not be enabled globally but is
+ only intended to secure e.g. name servers in namespaces where
+ TCP path mtu must still work but path MTU information of other
+ protocols should be discarded. If enabled globally this mode
+ could break other protocols.
+
+ Possible values: 0-3
Default: FALSE
min_pmtu - INTEGER
default 552 - minimum discovered Path MTU
+ip_forward_use_pmtu - BOOLEAN
+ By default we don't trust protocol path MTUs while forwarding
+ because they could be easily forged and can lead to unwanted
+ fragmentation by the router.
+ You only need to enable this if you have user-space software
+ which tries to discover path mtus by itself and depends on the
+ kernel honoring this information. This is normally not the
+ case.
+ Default: 0 (disabled)
+ Possible values:
+ 0 - disabled
+ 1 - enabled
+
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
@@ -160,6 +190,16 @@ tcp_app_win - INTEGER
buffer. Value 0 is special, it means that nothing is reserved.
Default: 31
+tcp_autocorking - BOOLEAN
+ Enable TCP auto corking :
+ When applications do consecutive small write()/sendmsg() system calls,
+ we try to coalesce these small writes as much as possible, to lower
+ total amount of sent packets. This is done if at least one prior
+ packet for the flow is waiting in Qdisc queues or device transmit
+ queue. Applications can still use TCP_CORK for optimal behavior
+ when they know how/when to uncork their sockets.
+ Default : 1
+
tcp_available_congestion_control - STRING
Shows the available congestion control choices that are registered.
More congestion control algorithms may be available as modules,
@@ -1048,6 +1088,12 @@ igmpv3_unsolicited_report_interval - INTEGER
IGMPv3 report retransmit will take place.
Default: 1000 (1 seconds)
+promote_secondaries - BOOLEAN
+ When a primary IP address is removed from this interface
+ promote a corresponding secondary IP address instead of
+ removing all the corresponding secondary IP addresses.
+
+
tag - INTEGER
Allows you to write a number, which can be used as required.
Default value is 0.
@@ -1078,6 +1124,21 @@ bindv6only - BOOLEAN
Default: FALSE (as specified in RFC3493)
+flowlabel_consistency - BOOLEAN
+ Protect the consistency (and unicity) of flow label.
+ You have to disable it to use IPV6_FL_F_REFLECT flag on the
+ flow label manager.
+ TRUE: enabled
+ FALSE: disabled
+ Default: TRUE
+
+anycast_src_echo_reply - BOOLEAN
+ Controls the use of anycast addresses as source addresses for ICMPv6
+ echo reply
+ TRUE: enabled
+ FALSE: disabled
+ Default: FALSE
+
IPv6 Fragmentation:
ip6frag_high_thresh - INTEGER