diff options
Diffstat (limited to 'Documentation/networking/slicecom.txt')
| -rw-r--r-- | Documentation/networking/slicecom.txt | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt index 59cfd95121f..2f04c9267f8 100644 --- a/Documentation/networking/slicecom.txt +++ b/Documentation/networking/slicecom.txt @@ -89,7 +89,7 @@ red: green: meaning: - - no frame-sync, no signal received, or signal SNAFU. - on "Everything is OK" -on on Recepion is ok, but the remote end sends Remote Alarm +on on Reception is ok, but the remote end sends Remote Alarm on - The interface is unconfigured ----------------------------------------------------------------- @@ -257,12 +257,12 @@ which begin with '//' are the comments. // No alarms - Everything OK // // LOS - Loss Of Signal - No signal sensed on the input -// AIS - Alarm Indication Signal - The remot side sends '11111111'-s, +// AIS - Alarm Indication Signal - The remote side sends '11111111'-s, // it tells, that there's an error condition, or it's not // initialised. // AUXP - Auxiliary Pattern Indication - 01010101.. received. // LFA - Loss of Frame Alignment - no frame sync received. -// RRA - Receive Remote Alarm - the remote end's OK, but singnals error cond. +// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond. // LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync. // NMF - No Multiframe alignment Found after 400 msec - no such alarm using // no-crc4 or crc4 framing, see below. @@ -364,6 +364,6 @@ Treat them very carefully, these can cause much trouble! # echo >lbireg 0x1d 0x21 - - Swithing the loop off: + - Switching the loop off: # echo >lbireg 0x1d 0x00 |