summaryrefslogtreecommitdiffstats
path: root/Documentation/networking
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking')
-rw-r--r--Documentation/networking/driver.txt5
-rw-r--r--Documentation/networking/iphase.txt2
-rw-r--r--Documentation/networking/irda.txt8
-rw-r--r--Documentation/networking/ray_cs.txt3
-rw-r--r--Documentation/networking/vortex.txt28
5 files changed, 19 insertions, 27 deletions
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index 11fd0ef5ff5..a9ad58b49cc 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -1,7 +1,4 @@
-Documents about softnet driver issues in general can be found
-at:
-
- http://www.firstfloor.org/~andi/softnet/
+Document about softnet driver issues
Transmit path guidelines:
diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt
index 39ccb8595bf..493203a080a 100644
--- a/Documentation/networking/iphase.txt
+++ b/Documentation/networking/iphase.txt
@@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
- All variants of Interphase ATM PCI (i)Chip adapter cards are supported,
including x575 (OC3, control memory 128K , 512K and packet memory 128K,
512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See
- http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM
+ http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
for details.
- Only x86 platforms are supported.
- SMP is supported.
diff --git a/Documentation/networking/irda.txt b/Documentation/networking/irda.txt
index 9e5b8e66d6a..bff26c138be 100644
--- a/Documentation/networking/irda.txt
+++ b/Documentation/networking/irda.txt
@@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed information about these and associated
programs can be found on http://irda.sourceforge.net/
For more information about how to use the IrDA protocol stack, see the
-Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html)
-by Werner Heuser <wehe@tuxmobil.org>
+Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>:
+<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html>
There is an active mailing list for discussing Linux-IrDA matters called
irda-users@lists.sourceforge.net
-
-
-
-
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
index b1def00bc4a..5427f8c7df9 100644
--- a/Documentation/networking/ray_cs.txt
+++ b/Documentation/networking/ray_cs.txt
@@ -29,8 +29,7 @@ with nondefault parameters, they can be edited in
will find them all.
Information on card services is available at:
- ftp://hyper.stanford.edu/pub/pcmcia/doc
- http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html
+ http://pcmcia-cs.sourceforge.net/
Card services user programs are still required for PCMCIA devices.
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index 80e1cb19609..3759acf95b2 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -11,7 +11,7 @@ The driver was written by Donald Becker <becker@scyld.com>
Don is no longer the prime maintainer of this version of the driver.
Please report problems to one or more of:
- Andrew Morton <andrewm@uow.edu.au>
+ Andrew Morton <akpm@osdl.org>
Netdev mailing list <netdev@vger.kernel.org>
Linux kernel mailing list <linux-kernel@vger.kernel.org>
@@ -274,24 +274,24 @@ Details of the device driver implementation are at the top of the source file.
Additional documentation is available at Don Becker's Linux Drivers site:
- http://www.scyld.com/network/vortex.html
+ http://www.scyld.com/vortex.html
Donald Becker's driver development site:
- http://www.scyld.com/network
+ http://www.scyld.com/network.html
Donald's vortex-diag program is useful for inspecting the NIC's state:
- http://www.scyld.com/diag/#pci-diags
+ http://www.scyld.com/ethercard_diag.html
Donald's mii-diag program may be used for inspecting and manipulating
the NIC's Media Independent Interface subsystem:
- http://www.scyld.com/diag/#mii-diag
+ http://www.scyld.com/ethercard_diag.html#mii-diag
Donald's wake-on-LAN page:
- http://www.scyld.com/expert/wake-on-lan.html
+ http://www.scyld.com/wakeonlan.html
3Com's documentation for many NICs, including the ones supported by
this driver is available at
@@ -305,7 +305,7 @@ this driver is available at
Driver updates and a detailed changelog for the modifications which
were made for the 2.3/2,4 series kernel is available at
- http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3
+ http://www.zip.com.au/~akpm/linux/#3c59x-bc
Autonegotiation notes
@@ -434,8 +434,8 @@ steps you should take:
send all logs to the maintainer.
3) Download you card's diagnostic tool from Donald
- Backer's website http://www.scyld.com/diag. Download
- mii-diag.c as well. Build these.
+ Becker's website <http://www.scyld.com/ethercard_diag.html>.
+ Download mii-diag.c as well. Build these.
a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is
working correctly. Save the output.
@@ -443,8 +443,8 @@ steps you should take:
b) Run the above commands when the card is malfunctioning. Send
both sets of output.
-Finally, please be patient and be prepared to do some work. You may end up working on
-this problem for a week or more as the maintainer asks more questions, asks for more
-tests, asks for patches to be applied, etc. At the end of it all, the problem may even
-remain unresolved.
-
+Finally, please be patient and be prepared to do some work. You may
+end up working on this problem for a week or more as the maintainer
+asks more questions, asks for more tests, asks for patches to be
+applied, etc. At the end of it all, the problem may even remain
+unresolved.