diff options
Diffstat (limited to 'Documentation/powerpc')
| -rw-r--r-- | Documentation/powerpc/cpu_features.txt | 2 | ||||
| -rw-r--r-- | Documentation/powerpc/dts-bindings/fsl/board.txt | 32 |
2 files changed, 32 insertions, 2 deletions
diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.txt index 472739880e8..ffa4183fdb8 100644 --- a/Documentation/powerpc/cpu_features.txt +++ b/Documentation/powerpc/cpu_features.txt @@ -31,7 +31,7 @@ anyways). After detecting the processor type, the kernel patches out sections of code that shouldn't be used by writing nop's over it. Using cpufeatures requires -just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S +just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S transfer_to_handler: #ifdef CONFIG_ALTIVEC diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt index 81a917ef96e..6c974d28eeb 100644 --- a/Documentation/powerpc/dts-bindings/fsl/board.txt +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -18,7 +18,7 @@ This is the memory-mapped registers for on board FPGA. Required properities: - compatible : should be "fsl,fpga-pixis". -- reg : should contain the address and the lenght of the FPPGA register +- reg : should contain the address and the length of the FPPGA register set. Example (MPC8610HPCD): @@ -27,3 +27,33 @@ Example (MPC8610HPCD): compatible = "fsl,fpga-pixis"; reg = <0xe8000000 32>; }; + +* Freescale BCSR GPIO banks + +Some BCSR registers act as simple GPIO controllers, each such +register can be represented by the gpio-controller node. + +Required properities: +- compatible : Should be "fsl,<board>-bcsr-gpio". +- reg : Should contain the address and the length of the GPIO bank + register. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional paramters (currently unused). +- gpio-controller : Marks the port as GPIO controller. + +Example: + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr13: gpio-controller@d { + #gpio-cells = <2>; + compatible = "fsl,mpc8360mds-bcsr-gpio"; + reg = <0xd 1>; + gpio-controller; + }; + }; |