diff options
Diffstat (limited to 'Documentation/s390')
| -rw-r--r-- | Documentation/s390/s390dbf.txt | 79 |
1 files changed, 46 insertions, 33 deletions
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt index 2d1cd939b4d..e24fdeada97 100644 --- a/Documentation/s390/s390dbf.txt +++ b/Documentation/s390/s390dbf.txt @@ -12,8 +12,8 @@ where log records can be stored efficiently in memory, where each component One purpose of this is to inspect the debug logs after a production system crash in order to analyze the reason for the crash. If the system still runs but only a subcomponent which uses dbf failes, -it is possible to look at the debug logs on a live system via the Linux proc -filesystem. +it is possible to look at the debug logs on a live system via the Linux +debugfs filesystem. The debug feature may also very useful for kernel and driver development. Design: @@ -52,16 +52,18 @@ Each debug entry contains the following data: - Flag, if entry is an exception or not The debug logs can be inspected in a live system through entries in -the proc-filesystem. Under the path /proc/s390dbf there is +the debugfs-filesystem. Under the toplevel directory "s390dbf" there is a directory for each registered component, which is named like the -corresponding component. +corresponding component. The debugfs normally should be mounted to +/sys/kernel/debug therefore the debug feature can be accessed unter +/sys/kernel/debug/s390dbf. The content of the directories are files which represent different views to the debug log. Each component can decide which views should be used through registering them with the function debug_register_view(). Predefined views for hex/ascii, sprintf and raw binary data are provided. It is also possible to define other views. The content of -a view can be inspected simply by reading the corresponding proc file. +a view can be inspected simply by reading the corresponding debugfs file. All debug logs have an an actual debug level (range from 0 to 6). The default level is 3. Event and Exception functions have a 'level' @@ -69,14 +71,14 @@ parameter. Only debug entries with a level that is lower or equal than the actual level are written to the log. This means, when writing events, high priority log entries should have a low level value whereas low priority entries should have a high one. -The actual debug level can be changed with the help of the proc-filesystem -through writing a number string "x" to the 'level' proc file which is +The actual debug level can be changed with the help of the debugfs-filesystem +through writing a number string "x" to the 'level' debugfs file which is provided for every debug log. Debugging can be switched off completely -by using "-" on the 'level' proc file. +by using "-" on the 'level' debugfs file. Example: -> echo "-" > /proc/s390dbf/dasd/level +> echo "-" > /sys/kernel/debug/s390dbf/dasd/level It is also possible to deactivate the debug feature globally for every debug log. You can change the behavior using 2 sysctl parameters in @@ -99,11 +101,11 @@ Kernel Interfaces: ------------------ ---------------------------------------------------------------------------- -debug_info_t *debug_register(char *name, int pages_index, int nr_areas, +debug_info_t *debug_register(char *name, int pages, int nr_areas, int buf_size); -Parameter: name: Name of debug log (e.g. used for proc entry) - pages_index: 2^pages_index pages will be allocated per area +Parameter: name: Name of debug log (e.g. used for debugfs entry) + pages: number of pages, which will be allocated per area nr_areas: number of debug areas buf_size: size of data area in each debug entry @@ -134,7 +136,7 @@ Return Value: none Description: Sets new actual debug level if new_level is valid. --------------------------------------------------------------------------- -+void debug_stop_all(void); +void debug_stop_all(void); Parameter: none @@ -270,7 +272,7 @@ Parameter: id: handle for debug log Return Value: 0 : ok < 0: Error -Description: registers new debug view and creates proc dir entry +Description: registers new debug view and creates debugfs dir entry --------------------------------------------------------------------------- int debug_unregister_view (debug_info_t * id, struct debug_view *view); @@ -281,7 +283,7 @@ Parameter: id: handle for debug log Return Value: 0 : ok < 0: Error -Description: unregisters debug view and removes proc dir entry +Description: unregisters debug view and removes debugfs dir entry @@ -308,7 +310,7 @@ static int init(void) { /* register 4 debug areas with one page each and 4 byte data field */ - debug_info = debug_register ("test", 0, 4, 4 ); + debug_info = debug_register ("test", 1, 4, 4 ); debug_register_view(debug_info,&debug_hex_ascii_view); debug_register_view(debug_info,&debug_raw_view); @@ -343,7 +345,7 @@ static int init(void) /* register 4 debug areas with one page each and data field for */ /* format string pointer + 2 varargs (= 3 * sizeof(long)) */ - debug_info = debug_register ("test", 0, 4, sizeof(long) * 3); + debug_info = debug_register ("test", 1, 4, sizeof(long) * 3); debug_register_view(debug_info,&debug_sprintf_view); debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__); @@ -362,16 +364,16 @@ module_exit(cleanup); -ProcFS Interface +Debugfs Interface ---------------- Views to the debug logs can be investigated through reading the corresponding -proc-files: +debugfs-files: Example: -> ls /proc/s390dbf/dasd -flush hex_ascii level raw -> cat /proc/s390dbf/dasd/hex_ascii | sort +1 +> ls /sys/kernel/debug/s390dbf/dasd +flush hex_ascii level pages raw +> cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort +1 00 00974733272:680099 2 - 02 0006ad7e 07 ea 4a 90 | .... 00 00974733272:682210 2 - 02 0006ade6 46 52 45 45 | FREE 00 00974733272:682213 2 - 02 0006adf6 07 ea 4a 90 | .... @@ -391,25 +393,36 @@ Changing the debug level Example: -> cat /proc/s390dbf/dasd/level +> cat /sys/kernel/debug/s390dbf/dasd/level 3 -> echo "5" > /proc/s390dbf/dasd/level -> cat /proc/s390dbf/dasd/level +> echo "5" > /sys/kernel/debug/s390dbf/dasd/level +> cat /sys/kernel/debug/s390dbf/dasd/level 5 Flushing debug areas -------------------- Debug areas can be flushed with piping the number of the desired -area (0...n) to the proc file "flush". When using "-" all debug areas +area (0...n) to the debugfs file "flush". When using "-" all debug areas are flushed. Examples: 1. Flush debug area 0: -> echo "0" > /proc/s390dbf/dasd/flush +> echo "0" > /sys/kernel/debug/s390dbf/dasd/flush 2. Flush all debug areas: -> echo "-" > /proc/s390dbf/dasd/flush +> echo "-" > /sys/kernel/debug/s390dbf/dasd/flush + +Changing the size of debug areas +------------------------------------ +It is possible the change the size of debug areas through piping +the number of pages to the debugfs file "pages". The resize request will +also flush the debug areas. + +Example: + +Define 4 pages for the debug areas of debug feature "dasd": +> echo "4" > /sys/kernel/debug/s390dbf/dasd/pages Stooping the debug feature -------------------------- @@ -491,7 +504,7 @@ Defining views -------------- Views are specified with the 'debug_view' structure. There are defined -callback functions which are used for reading and writing the proc files: +callback functions which are used for reading and writing the debugfs files: struct debug_view { char name[DEBUG_MAX_PROCF_LEN]; @@ -525,7 +538,7 @@ typedef int (debug_input_proc_t) (debug_info_t* id, The "private_data" member can be used as pointer to view specific data. It is not used by the debug feature itself. -The output when reading a debug-proc file is structured like this: +The output when reading a debugfs file is structured like this: "prolog_proc output" @@ -534,13 +547,13 @@ The output when reading a debug-proc file is structured like this: "header_proc output 3" "format_proc output 3" ... -When a view is read from the proc fs, the Debug Feature calls the +When a view is read from the debugfs, the Debug Feature calls the 'prolog_proc' once for writing the prolog. Then 'header_proc' and 'format_proc' are called for each existing debug entry. The input_proc can be used to implement functionality when it is written to -the view (e.g. like with 'echo "0" > /proc/s390dbf/dasd/level). +the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level). For header_proc there can be used the default function debug_dflt_header_fn() which is defined in in debug.h. @@ -602,7 +615,7 @@ debug_info = debug_register ("test", 0, 4, 4 )); debug_register_view(debug_info, &debug_test_view); for(i = 0; i < 10; i ++) debug_int_event(debug_info, 1, i); -> cat /proc/s390dbf/test/myview +> cat /sys/kernel/debug/s390dbf/test/myview 00 00964419734:611402 1 - 00 88042ca This error........... 00 00964419734:611405 1 - 00 88042ca That error........... 00 00964419734:611408 1 - 00 88042ca Problem.............. |