diff options
Diffstat (limited to 'Documentation/scsi/tmscsim.txt')
| -rw-r--r-- | Documentation/scsi/tmscsim.txt | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index df7a02bfb5b..8b2168aa4fc 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -27,7 +27,7 @@ Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F (NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter, tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more, -as the ncr53c8xx is perfectly supporting these adpaters since some time. +as the ncr53c8xx is perfectly supporting these adapters since some time. The driver first appeared in April 1996, exclusively supported the DC390 and has been enhanced since then in various steps. In May 1998 support for @@ -381,7 +381,7 @@ Please see http://www.garloff.de/kurt/linux/dc390/problems.html replaced by the dev index of your scanner). You may try to reset your SCSI bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?). The problem seems to be solved as of 2.0d18, thanks to Andreas Rick. -* If there is a valid partition table, the driver will use it for determing +* If there is a valid partition table, the driver will use it for determining the mapping. If there's none, a reasonable mapping (Symbios-like) will be assumed. Other operating systems may not like this mapping, though it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the |