summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/ChangeLog.1992-19972
-rw-r--r--Documentation/scsi/NinjaSCSI.txt18
-rw-r--r--Documentation/scsi/aacraid.txt2
-rw-r--r--Documentation/scsi/aic79xx.txt4
-rw-r--r--Documentation/scsi/aic7xxx.txt2
-rw-r--r--Documentation/scsi/aic7xxx_old.txt6
-rw-r--r--Documentation/scsi/dc395x.txt2
-rw-r--r--Documentation/scsi/dpti.txt2
-rw-r--r--Documentation/scsi/ibmmca.txt36
-rw-r--r--Documentation/scsi/megaraid.txt4
-rw-r--r--Documentation/scsi/ncr53c8xx.txt20
-rw-r--r--Documentation/scsi/osst.txt3
-rw-r--r--Documentation/scsi/ppa.txt2
-rw-r--r--Documentation/scsi/scsi-changer.txt2
-rw-r--r--Documentation/scsi/scsi_eh.txt4
-rw-r--r--Documentation/scsi/st.txt4
-rw-r--r--Documentation/scsi/sym53c8xx_2.txt4
-rw-r--r--Documentation/scsi/tmscsim.txt4
18 files changed, 60 insertions, 61 deletions
diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997
index dc88ee2ab73..6faad7e6417 100644
--- a/Documentation/scsi/ChangeLog.1992-1997
+++ b/Documentation/scsi/ChangeLog.1992-1997
@@ -1214,7 +1214,7 @@ Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22)
* sr.c(sr_open): Do not allow opens with write access.
-Mon Jul 18 09:51:22 1994 1994 Eric Youngdale (eric@esp22)
+Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22)
* Linux 1.1.31 released.
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
index 041780f428a..3229b64cf24 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.txt
@@ -24,7 +24,7 @@ SCSI device: I-O data CDPS-PX24 (CD-ROM drive)
You can also use "cardctl" program (this program is in pcmcia-cs source
code) to get more info.
-# cat /var/log/messgaes
+# cat /var/log/messages
...
Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1
Jan 2 03:45:06 lindberg cardmgr[78]: product info: "WBT", "NinjaSCSI-3", "R1.0"
@@ -36,18 +36,18 @@ Socket 1:
product info: "IO DATA", "CBSC16 ", "1"
-[2] Get Linux kernel source, and extract it to /usr/src.
- Because NinjaSCSI driver requiers some SCSI header files in Linux kernel
- source.
- I recomend rebuilding your kernel. This eliminate some versioning problem.
+[2] Get the Linux kernel source, and extract it to /usr/src.
+ Because the NinjaSCSI driver requires some SCSI header files in Linux
+ kernel source, I recommend rebuilding your kernel; this eliminates
+ some versioning problems.
$ cd /usr/src
$ tar -zxvf linux-x.x.x.tar.gz
$ cd linux
$ make config
...
-[3] If you use this driver with Kernel 2.2, Unpack pcmcia-cs in some directory
- and make & install. This driver requies pcmcia-cs header file.
+[3] If you use this driver with Kernel 2.2, unpack pcmcia-cs in some directory
+ and make & install. This driver requires the pcmcia-cs header file.
$ cd /usr/src
$ tar zxvf cs-pcmcia-cs-3.x.x.tar.gz
...
@@ -59,10 +59,10 @@ $ emacs Makefile
...
$ make
-[5] Copy nsp_cs.o to suitable plase, like /lib/modules/<Kernel version>/pcmcia/ .
+[5] Copy nsp_cs.ko to suitable place, like /lib/modules/<Kernel version>/pcmcia/ .
[6] Add these lines to /etc/pcmcia/config .
- If you yse pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
+ If you use pcmcia-cs-3.1.8 or later, we can use "nsp_cs.conf" file.
So, you don't need to edit file. Just copy to /etc/pcmcia/ .
-------------------------------------
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index ee03678c802..3367130e64f 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -4,7 +4,7 @@ Introduction
-------------------------
The aacraid driver adds support for Adaptec (http://www.adaptec.com)
RAID controllers. This is a major rewrite from the original
-Adaptec supplied driver. It has signficantly cleaned up both the code
+Adaptec supplied driver. It has significantly cleaned up both the code
and the running binary size (the module is less than half the size of
the original).
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index 382b439b439..904d49e90ef 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -81,7 +81,7 @@ The following information is available in this file:
an SDTR with an offset of 0 to be sure the target
knows we are async. This works around a firmware defect
in the Quantum Atlas 10K.
- - Implement controller susupend and resume.
+ - Implement controller suspend and resume.
- Clear PCI error state during driver attach so that we
don't disable memory mapped I/O due to a stray write
by some other driver probe that occurred before we
@@ -94,7 +94,7 @@ The following information is available in this file:
- Add support for scsi_report_device_reset() found in
2.5.X kernels.
- Add 7901B support.
- - Simplify handling of the packtized lun Rev A workaround.
+ - Simplify handling of the packetized lun Rev A workaround.
- Correct and simplify handling of the ignore wide residue
message. The previous code would fail to report a residual
if the transaction data length was even and we received
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index 3481fcded4c..9b894f116d9 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -160,7 +160,7 @@ The following information is available in this file:
6.2.34 (May 5th, 2003)
- Fix locking regression instroduced in 6.2.29 that
- could cuase a lock order reversal between the io_request_lock
+ could cause a lock order reversal between the io_request_lock
and our per-softc lock. This was only possible on RH9,
SuSE, and kernel.org 2.4.X kernels.
diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt
index 79e5ac6cb6f..c92f4473193 100644
--- a/Documentation/scsi/aic7xxx_old.txt
+++ b/Documentation/scsi/aic7xxx_old.txt
@@ -102,7 +102,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
The hardware RAID devices sold by Adaptec are *NOT* supported by this
driver (and will people please stop emailing me about them, they are
a totally separate beast from the bare SCSI controllers and this driver
- can not be retrofitted in any sane manner to support the hardware RAID
+ cannot be retrofitted in any sane manner to support the hardware RAID
features on those cards - Doug Ledford).
@@ -241,7 +241,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
that instead of dumping the register contents on the card, this
option dumps the contents of the sequencer program RAM. This gives
the ability to verify that the instructions downloaded to the
- card's sequencer are indeed what they are suppossed to be. Again,
+ card's sequencer are indeed what they are supposed to be. Again,
unless you have documentation to tell you how to interpret these
numbers, then it is totally useless.
@@ -317,7 +317,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
initial DEVCONFIG values for each of your aic7xxx controllers as
they are listed, and also record what the machine is detecting as
the proper termination on your controllers. NOTE: the order in
- which the initial DEVCONFIG values are printed out is not gauranteed
+ which the initial DEVCONFIG values are printed out is not guaranteed
to be the same order as the SCSI controllers are registered. The
above option and this option both work on the order of the SCSI
controllers as they are registered, so make sure you match the right
diff --git a/Documentation/scsi/dc395x.txt b/Documentation/scsi/dc395x.txt
index ae3b79a2d27..88219f96633 100644
--- a/Documentation/scsi/dc395x.txt
+++ b/Documentation/scsi/dc395x.txt
@@ -20,7 +20,7 @@ Parameters
----------
The driver uses the settings from the EEPROM set in the SCSI BIOS
setup. If there is no EEPROM, the driver uses default values.
-Both can be overriden by command line parameters (module or kernel
+Both can be overridden by command line parameters (module or kernel
parameters).
The following parameters are available:
diff --git a/Documentation/scsi/dpti.txt b/Documentation/scsi/dpti.txt
index 6e45e70243e..f36dc0e7c8d 100644
--- a/Documentation/scsi/dpti.txt
+++ b/Documentation/scsi/dpti.txt
@@ -48,7 +48,7 @@
* Implemented suggestions from Alan Cox
* Added calculation of resid for sg layer
* Better error handling
- * Added checking underflow condtions
+ * Added checking underflow conditions
* Added DATAPROTECT checking
* Changed error return codes
* Fixed pointer bug in bus reset routine
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index d16ce5b540f..35f6b8ed229 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -229,7 +229,7 @@
In a second step of the driver development, the following improvement has
been applied: The first approach limited the number of devices to 7, far
- fewer than the 15 that it could usem then it just maped ldn ->
+ fewer than the 15 that it could use, then it just mapped ldn ->
(ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns
and luns, but it all seemed to work.
@@ -254,12 +254,12 @@
device to be existant, but it has no ldn assigned, it gets a ldn out of 7
to 14. The numbers are assigned in cyclic order. Therefore it takes 8
dynamical reassignments on the SCSI-devices, until a certain device
- loses its ldn again. This assures, that dynamical remapping is avoided
+ loses its ldn again. This assures that dynamical remapping is avoided
during intense I/O between up to 15 SCSI-devices (means pun,lun
- combinations). A further advantage of this method is, that people who
+ combinations). A further advantage of this method is that people who
build their kernel without probing on all luns will get what they expect,
because the driver just won't assign everything with lun>0 when
- multpile lun probing is inactive.
+ multiple lun probing is inactive.
2.4 SCSI-Device Order
---------------------
@@ -309,9 +309,9 @@
2.6 Abort & Reset Commands
--------------------------
These are implemented with busy waiting for interrupt to arrive.
- ibmmca_reset() and ibmmca_abort() do not work sufficently well
- up to now and need still a lot of development work. But, this seems
- to be even a problem with other SCSI-low level drivers, too. However,
+ ibmmca_reset() and ibmmca_abort() do not work sufficiently well
+ up to now and need still a lot of development work. This seems
+ to be a problem with other low-level SCSI drivers too, however
this should be no excuse.
2.7 Disk Geometry
@@ -684,8 +684,8 @@
not like sending commands to non-existing SCSI-devices and will react
with a command error as a sign of protest. While this error is not
present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI
- Adapters. Therefore, I implemented a workarround to forgive those
- adapters their protests, but it is marked up in the statisctis, so
+ Adapters. Therefore, I implemented a workaround to forgive those
+ adapters their protests, but it is marked up in the statistics, so
after a successful boot, you can see in /proc/scsi/ibmmca/<host_number>
how often the command errors have been forgiven to the SCSI-subsystem.
If the number is bigger than 0, you have a SCSI subsystem of older
@@ -778,15 +778,15 @@
not accept this, as they stick quite near to ANSI-SCSI and report
a COMMAND_ERROR message which causes the driver to panic. The main
problem was located around the INQUIRY command. Now, for all the
- mentioned commands, the buffersize, sent to the adapter is at
+ mentioned commands, the buffersize sent to the adapter is at
maximum 255 which seems to be a quite reasonable solution.
- TEST_UNIT_READY gets a buffersize of 0 to make sure, that no
+ TEST_UNIT_READY gets a buffersize of 0 to make sure that no
data is transferred in order to avoid any possible command failure.
- 2) On unsuccessful TEST_UNIT_READY, the midlevel-driver has to send
- a REQUEST_SENSE in order to see, where the problem is located. This
+ 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send
+ a REQUEST_SENSE in order to see where the problem is located. This
REQUEST_SENSE may have various length in its answer-buffer. IBM
- SCSI-subsystems report a command failure, if the returned buffersize
- is different from the sent buffersize, but this can be supressed by
+ SCSI-subsystems report a command failure if the returned buffersize
+ is different from the sent buffersize, but this can be suppressed by
a special bit, which is now done and problems seem to be solved.
2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on
2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes.
@@ -1086,7 +1086,7 @@
Q: "Reset SCSI-devices at boottime" halts the system at boottime, why?
A: This is only tested with the IBM SCSI Adapter w/cache. It is not
- yet prooved to run on other adapters, however you may be lucky.
+ yet proven to run on other adapters, however you may be lucky.
In version 3.1d this has been hugely improved and should work better,
now. Normally you really won't need to activate this flag in the
kernel configuration, as all post 1989 SCSI-devices should accept
@@ -1104,7 +1104,7 @@
The parameter 'normal' sets the new industry standard, starting
from pun 0, scanning up to pun 6. This allows you to change your
opinion still after having already compiled the kernel.
- Q: Why I cannot find the IBM MCA SCSI support in the config menue?
+ Q: Why can't I find IBM MCA SCSI support in the config menu?
A: You have to activate MCA bus support, first.
Q: Where can I find the latest info about this driver?
A: See the file MAINTAINERS for the current WWW-address, which offers
@@ -1156,7 +1156,7 @@
Guide) what has to be done for reset, we still share the bad shape of
the reset functions with all other low level SCSI-drivers.
Astonishingly, reset works in most cases quite ok, but the harddisks
- won't run in synchonous mode anymore after a reset, until you reboot.
+ won't run in synchronous mode anymore after a reset, until you reboot.
Q: Why does my XXX w/Cache adapter not use read-prefetch?
A: Ok, that is not completely possible. If a cache is present, the
adapter tries to use it internally. Explicitly, one can use the cache
diff --git a/Documentation/scsi/megaraid.txt b/Documentation/scsi/megaraid.txt
index ff864c0f494..3c7cea51e68 100644
--- a/Documentation/scsi/megaraid.txt
+++ b/Documentation/scsi/megaraid.txt
@@ -4,11 +4,11 @@
Overview:
--------
-Different classes of controllers from LSI Logic, accept and respond to the
+Different classes of controllers from LSI Logic accept and respond to the
user applications in a similar way. They understand the same firmware control
commands. Furthermore, the applications also can treat different classes of
the controllers uniformly. Hence it is logical to have a single module that
-interefaces with the applications on one side and all the low level drivers
+interfaces with the applications on one side and all the low level drivers
on the other.
The advantages, though obvious, are listed for completeness:
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 822d2aca370..58ad8db333d 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -70,7 +70,7 @@ Written by Gerard Roudier <groudier@free.fr>
15. SCSI problem troubleshooting
15.1 Problem tracking
15.2 Understanding hardware error reports
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers
16.2 Synchronous timings for fast SCSI-2 53C8XX controllers
17. Serial NVRAM support (by Richard Waltham)
@@ -96,10 +96,10 @@ The original driver has been written for 386bsd and FreeBSD by:
It is now available as a bundle of 2 drivers:
- ncr53c8xx generic driver that supports all the SYM53C8XX family including
- the ealiest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
+ the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and
the new 895A (1 channel LVD SCSI controller).
- sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest
- chips in order to gain advantage of new features, as LOAD/STORE intructions
+ chips in order to gain advantage of new features, as LOAD/STORE instructions
available since the 810A and hardware phase mismatch available with the
896 and the 895A.
@@ -207,7 +207,7 @@ The 896 and the 895A allows handling of the phase mismatch context from
SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor
until the C code has saved the context of the transfer).
Implementing this without using LOAD/STORE instructions would be painfull
-and I did'nt even want to try it.
+and I didn't even want to try it.
The 896 chip supports 64 bit PCI transactions and addressing, while the
895A supports 32 bit PCI transactions and 64 bit addressing.
@@ -631,8 +631,8 @@ string variable using 'insmod'.
A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
-an optionnal list of integers separated with comma followed by an optional
-list of comma-separated strings. Example of boot setup command under lilo
+an optional list of integers separated with comma followed by an optional
+list of comma-separated strings. Example of boot setup command under lilo
prompt:
lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
@@ -778,7 +778,7 @@ port address 0x1400.
Some scsi boards use a 875 (ultra wide) and only supply narrow connectors.
If you have connected a wide device with a 50 pins to 68 pins cable
converter, any accepted wide negotiation will break further data transfers.
- In such a case, using "wide:0" in the bootup command will be helpfull.
+ In such a case, using "wide:0" in the bootup command will be helpful.
10.2.14 Differential mode
diff:0 never set up diff mode
@@ -899,7 +899,7 @@ boot setup can be:
ncr53c8xx=safe:y,mpar:y
ncr53c8xx=safe:y
-My personnal system works flawlessly with the following equivalent setup:
+My personal system works flawlessly with the following equivalent setup:
ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
tags:32,sync:12,debug:0,burst:7,led:1,wide:1,settle:2,diff:0,irqm:0
@@ -1151,7 +1151,7 @@ Driver files:
New driver versions are made available separately in order to allow testing
changes and new features prior to including them into the linux kernel
-distribution. The following URL provides informations on latest avalaible
+distribution. The following URL provides information on latest available
patches:
ftp://ftp.tux.org/pub/people/gerard-roudier/README
@@ -1382,7 +1382,7 @@ SCSI standards, chip cores functionnals and internal driver data structures.
You are not required to decode and understand them, unless you want to help
maintain the driver code.
-16. Synchonous transfer negotiation tables
+16. Synchronous transfer negotiation tables
Tables below have been created by calling the routine the driver uses
for synchronisation negotiation timing calculation and chip setting.
diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt
index ce574e7791a..f536907e241 100644
--- a/Documentation/scsi/osst.txt
+++ b/Documentation/scsi/osst.txt
@@ -56,8 +56,7 @@ Compile your kernel and install the modules.
Now, your osst driver is inside the kernel or available as a module,
depending on your choice during kernel config. You may still need to create
-the device nodes by calling the Makedevs.sh script (see below) manually,
-unless you use a devfs kernel, where this won't be needed.
+the device nodes by calling the Makedevs.sh script (see below) manually.
To load your module, you may use the command
modprobe osst
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 5d9223bc1bd..067ac394e0b 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -3,7 +3,7 @@
General Iomega ZIP drive page for Linux:
http://www.torque.net/~campbell/
-Driver achive for old drivers:
+Driver archive for old drivers:
http://www.torque.net/~campbell/ppa/
Linux Parport page (parallel port)
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index c132687b017..d74bbd29eb3 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows
media transport - this one shuffles around the media, i.e. the
transport arm. Also known as "picker".
storage - a slot which can hold a media.
- import/export - the same as above, but is accessable from outside,
+ import/export - the same as above, but is accessible from outside,
i.e. there the operator (you !) can use this to
fill in and remove media from the changer.
Sometimes named "mailslot".
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index ce767b90bb0..b964eef2f62 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -160,7 +160,7 @@ ways.
- Fine-grained EH callbacks
LLDD can implement fine-grained EH callbacks and let SCSI
midlayer drive error handling and call appropriate callbacks.
- This will be dicussed further in [2-1].
+ This will be discussed further in [2-1].
- eh_strategy_handler() callback
This is one big callback which should perform whole error
@@ -194,7 +194,7 @@ lower layers and lower layers are ready to process or fail the scmd
again.
To achieve these goals, EH performs recovery actions with increasing
-severity. Some actions are performed by issueing SCSI commands and
+severity. Some actions are performed by issuing SCSI commands and
others are performed by invoking one of the following fine-grained
hostt EH callbacks. Callbacks may be omitted and omitted ones are
considered to fail always.
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 20e30cf3187..5ff65b18426 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -249,7 +249,7 @@ BOOT TIME CONFIGURATION
If the driver is compiled into the kernel, the same parameters can be
also set using, e.g., the LILO command line. The preferred syntax is
-is to use the same keyword used when loading as module but prepended
+to use the same keyword used when loading as module but prepended
with 'st.'. For instance, to set the maximum number of scatter/gather
segments, the parameter 'st.max_sg_segs=xx' should be used (xx is the
number of scatter/gather segments).
@@ -369,7 +369,7 @@ MTSETDRVBUFFER
the device dependent address. It is recommended to set
this flag unless there are tapes using the device
dependent (from the old times) (global)
- MT_ST_SYSV sets the SYSV sematics (mode)
+ MT_ST_SYSV sets the SYSV semantics (mode)
MT_ST_NOWAIT enables immediate mode (i.e., don't wait for
the command to finish) for some commands (e.g., rewind)
MT_ST_DEBUGGING debugging (global; debugging must be
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index 7f516cdcd26..26c8a08ca3e 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -67,7 +67,7 @@ under Linux is contained in 2 files named sym_glue.h and sym_glue.c.
Other drivers files are intended not to depend on the Operating System
on which the driver is used.
-The history of this driver can be summerized as follows:
+The history of this driver can be summarized as follows:
1993: ncr driver written for 386bsd and FreeBSD by:
Wolfgang Stanglmeier <wolf@cologne.de>
@@ -684,7 +684,7 @@ Field H : SCNTL3 Scsi Control Register 3
Contains the setting of timing values for both asynchronous and
synchronous data transfers.
Field I : SCNTL4 Scsi Control Register 4
- Only meaninful for 53C1010 Ultra3 controllers.
+ Only meaningful for 53C1010 Ultra3 controllers.
Understanding Fields J, K, L and dumps requires to have good knowledge of
SCSI standards, chip cores functionnals and internal driver data structures.
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index df7a02bfb5b..8b2168aa4fc 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -27,7 +27,7 @@ Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram
scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
(NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter,
tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more,
-as the ncr53c8xx is perfectly supporting these adpaters since some time.
+as the ncr53c8xx is perfectly supporting these adapters since some time.
The driver first appeared in April 1996, exclusively supported the DC390
and has been enhanced since then in various steps. In May 1998 support for
@@ -381,7 +381,7 @@ Please see http://www.garloff.de/kurt/linux/dc390/problems.html
replaced by the dev index of your scanner). You may try to reset your SCSI
bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?).
The problem seems to be solved as of 2.0d18, thanks to Andreas Rick.
-* If there is a valid partition table, the driver will use it for determing
+* If there is a valid partition table, the driver will use it for determining
the mapping. If there's none, a reasonable mapping (Symbios-like) will be
assumed. Other operating systems may not like this mapping, though
it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 12:24:12 +0000