diff options
Diffstat (limited to 'Documentation/sound')
-rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 27 | ||||
-rw-r--r-- | Documentation/sound/alsa/HD-Audio-Models.txt | 5 | ||||
-rw-r--r-- | Documentation/sound/alsa/HD-Audio.txt | 27 |
3 files changed, 58 insertions, 1 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8923597bd2b..bfcbbf88c44 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -482,6 +482,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. reference_rate - reference sample rate, 44100 or 48000 (default) multiple - multiple to ref. sample rate, 1 or 2 (default) + subsystem - override the PCI SSID for probing; the value + consists of SSVID << 16 | SSDID. The default is + zero, which means no override. This module supports multiple cards. @@ -1123,6 +1126,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards, autoprobe and ISA PnP. + Module snd-jazz16 + ------------------- + + Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips: + MVD1216 + MVA416 + MVA514. + + port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260) + irq - IRQ # for SB DSP chip (3,5,7,9,10,15) + dma8 - DMA # for SB DSP chip (1,3) + dma16 - DMA # for SB DSP chip (5,7) + mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330) + mpu_irq - MPU-401 irq # (2,3,5,7) + + This module supports multiple cards. + Module snd-korg1212 ------------------- @@ -1791,6 +1809,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-ua101 + ---------------- + + Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces. + + This module supports multiple devices, autoprobe and hotplugging. + Module snd-usb-audio -------------------- @@ -1923,7 +1948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV100/AV200 chips, - i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST + i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST (Deluxe) and Essence STX. This module supports autoprobe and multiple cards. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index e72cee9e2a7..1d38b0dfba9 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -124,6 +124,8 @@ ALC882/883/885/888/889 asus-a7m ASUS A7M macpro MacPro support mb5 Macbook 5,1 + macmini3 Macmini 3,1 + mba21 Macbook Air 2,1 mbp3 Macbook Pro rev3 imac24 iMac 24'' with jack detection imac91 iMac 9,1 @@ -279,13 +281,16 @@ Conexant 5051 laptop Basic Laptop config (default) hp HP Spartan laptop hp-dv6736 HP dv6736 + hp-f700 HP Compaq Presario F700 lenovo-x200 Lenovo X200 laptop + toshiba Toshiba Satellite M300 Conexant 5066 ============= laptop Basic Laptop config (default) dell-laptop Dell laptops olpc-xo-1_5 OLPC XO 1.5 + ideapad Lenovo IdeaPad U150 STAC9200 ======== diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 6325bec06a7..f4dd3bf99d1 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -452,6 +452,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs` sysfs entries, and the lines after `[hint]` are parsed as `hints` sysfs entries, respectively. +Another example to override the codec vendor id from 0x12345678 to +0xdeadbeef is like below: +------------------------------------------------------------------------ + [codec] + 0x12345678 0xabcd1234 2 + + [vendor_id] + 0xdeadbeef +------------------------------------------------------------------------ + +In the similar way, you can override the codec subsystem_id via +`[subsystem_id]`, the revision id via `[revision_id]` line. +Also, the codec chip name can be rewritten via `[chip_name]` line. +------------------------------------------------------------------------ + [codec] + 0x12345678 0xabcd1234 2 + + [subsystem_id] + 0xffff1111 + + [revision_id] + 0x10 + + [chip_name] + My-own NEWS-0002 +------------------------------------------------------------------------ + The hd-audio driver reads the file via request_firmware(). Thus, a patch file has to be located on the appropriate firmware path, typically, /lib/firmware. For example, when you pass the option |