summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt27
-rw-r--r--Documentation/sound/alsa/HD-Audio-Models.txt5
-rw-r--r--Documentation/sound/alsa/HD-Audio.txt27
3 files changed, 58 insertions, 1 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597bd2b..bfcbbf88c44 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -482,6 +482,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
reference_rate - reference sample rate, 44100 or 48000 (default)
multiple - multiple to ref. sample rate, 1 or 2 (default)
+ subsystem - override the PCI SSID for probing; the value
+ consists of SSVID << 16 | SSDID. The default is
+ zero, which means no override.
This module supports multiple cards.
@@ -1123,6 +1126,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports multiple cards, autoprobe and ISA PnP.
+ Module snd-jazz16
+ -------------------
+
+ Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+ MVD1216 + MVA416 + MVA514.
+
+ port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ irq - IRQ # for SB DSP chip (3,5,7,9,10,15)
+ dma8 - DMA # for SB DSP chip (1,3)
+ dma16 - DMA # for SB DSP chip (5,7)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (2,3,5,7)
+
+ This module supports multiple cards.
+
Module snd-korg1212
-------------------
@@ -1791,6 +1809,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-ua101
+ ----------------
+
+ Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
+
+ This module supports multiple devices, autoprobe and hotplugging.
+
Module snd-usb-audio
--------------------
@@ -1923,7 +1948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
- i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+ i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
(Deluxe) and Essence STX.
This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e72cee9e2a7..1d38b0dfba9 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -124,6 +124,8 @@ ALC882/883/885/888/889
asus-a7m ASUS A7M
macpro MacPro support
mb5 Macbook 5,1
+ macmini3 Macmini 3,1
+ mba21 Macbook Air 2,1
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
imac91 iMac 9,1
@@ -279,13 +281,16 @@ Conexant 5051
laptop Basic Laptop config (default)
hp HP Spartan laptop
hp-dv6736 HP dv6736
+ hp-f700 HP Compaq Presario F700
lenovo-x200 Lenovo X200 laptop
+ toshiba Toshiba Satellite M300
Conexant 5066
=============
laptop Basic Laptop config (default)
dell-laptop Dell laptops
olpc-xo-1_5 OLPC XO 1.5
+ ideapad Lenovo IdeaPad U150
STAC9200
========
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 6325bec06a7..f4dd3bf99d1 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -452,6 +452,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs`
sysfs entries, and the lines after `[hint]` are parsed as `hints`
sysfs entries, respectively.
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [vendor_id]
+ 0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [subsystem_id]
+ 0xffff1111
+
+ [revision_id]
+ 0x10
+
+ [chip_name]
+ My-own NEWS-0002
+------------------------------------------------------------------------
+
The hd-audio driver reads the file via request_firmware(). Thus,
a patch file has to be located on the appropriate firmware path,
typically, /lib/firmware. For example, when you pass the option