summaryrefslogtreecommitdiffstats
path: root/Documentation/spi/pxa2xx
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/spi/pxa2xx')
-rw-r--r--Documentation/spi/pxa2xx16
1 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index a1e0ee20f59..f9717fe9bd8 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -102,7 +102,7 @@ struct pxa2xx_spi_chip {
u8 tx_threshold;
u8 rx_threshold;
u8 dma_burst_size;
- u32 timeout_microsecs;
+ u32 timeout;
u8 enable_loopback;
void (*cs_control)(u32 command);
};
@@ -121,7 +121,7 @@ the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers
to determine the correct value. An SSP configured for byte-wide transfers would
use a value of 8.
-The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
+The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
trailing bytes in the SSP receiver fifo. The correct value for this field is
dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
slave device. Please note that the PXA2xx SSP 1 does not support trailing byte
@@ -162,18 +162,18 @@ static void cs8405a_cs_control(u32 command)
}
static struct pxa2xx_spi_chip cs8415a_chip_info = {
- .tx_threshold = 12, /* SSP hardward FIFO threshold */
- .rx_threshold = 4, /* SSP hardward FIFO threshold */
+ .tx_threshold = 8, /* SSP hardward FIFO threshold */
+ .rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
- .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+ .timeout = 235, /* See Intel documentation */
.cs_control = cs8415a_cs_control, /* Use external chip select */
};
static struct pxa2xx_spi_chip cs8405a_chip_info = {
- .tx_threshold = 12, /* SSP hardward FIFO threshold */
- .rx_threshold = 4, /* SSP hardward FIFO threshold */
+ .tx_threshold = 8, /* SSP hardward FIFO threshold */
+ .rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
- .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+ .timeout = 235, /* See Intel documentation */
.cs_control = cs8405a_cs_control, /* Use external chip select */
};