diff options
Diffstat (limited to 'Documentation/video4linux/v4l2-framework.txt')
| -rw-r--r-- | Documentation/video4linux/v4l2-framework.txt | 269 |
1 files changed, 230 insertions, 39 deletions
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index f22f35c271f..cf21f7aae97 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -71,6 +71,10 @@ sub-device instances, the video_device struct stores V4L2 device node data and in the future a v4l2_fh struct will keep track of filehandle instances (this is not yet implemented). +The V4L2 framework also optionally integrates with the media framework. If a +driver sets the struct v4l2_device mdev field, sub-devices and video nodes +will automatically appear in the media framework as entities. + struct v4l2_device ------------------ @@ -83,11 +87,20 @@ You must register the device instance: v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); -Registration will initialize the v4l2_device struct and link dev->driver_data -to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived -from dev (driver name followed by the bus_id, to be precise). If you set it -up before calling v4l2_device_register then it will be untouched. If dev is -NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register. +Registration will initialize the v4l2_device struct. If the dev->driver_data +field is NULL, it will be linked to v4l2_dev. + +Drivers that want integration with the media device framework need to set +dev->driver_data manually to point to the driver-specific device structure +that embed the struct v4l2_device instance. This is achieved by a +dev_set_drvdata() call before registering the V4L2 device instance. They must +also set the struct v4l2_device mdev field to point to a properly initialized +and registered media_device instance. + +If v4l2_dev->name is empty then it will be set to a value derived from dev +(driver name followed by the bus_id, to be precise). If you set it up before +calling v4l2_device_register then it will be untouched. If dev is NULL, then +you *must* setup v4l2_dev->name before calling v4l2_device_register. You can use v4l2_device_set_name() to set the name based on a driver name and a driver-global atomic_t instance. This will generate names like ivtv0, ivtv1, @@ -108,6 +121,7 @@ You unregister with: v4l2_device_unregister(struct v4l2_device *v4l2_dev); +If the dev->driver_data field points to v4l2_dev, it will be reset to NULL. Unregistering will also automatically unregister all subdevs from the device. If you have a hotpluggable device (e.g. a USB device), then when a disconnect @@ -167,6 +181,21 @@ static int __devinit drv_probe(struct pci_dev *pdev, state->instance = atomic_inc_return(&drv_instance) - 1; } +If you have multiple device nodes then it can be difficult to know when it is +safe to unregister v4l2_device. For this purpose v4l2_device has refcounting +support. The refcount is increased whenever video_register_device is called and +it is decreased whenever that device node is released. When the refcount reaches +zero, then the v4l2_device release() callback is called. You can do your final +cleanup there. + +If other device nodes (e.g. ALSA) are created, then you can increase and +decrease the refcount manually as well by calling: + +void v4l2_device_get(struct v4l2_device *v4l2_dev); + +or: + +int v4l2_device_put(struct v4l2_device *v4l2_dev); struct v4l2_subdev ------------------ @@ -254,6 +283,26 @@ A sub-device driver initializes the v4l2_subdev struct using: Afterwards you need to initialize subdev->name with a unique name and set the module owner. This is done for you if you use the i2c helper functions. +If integration with the media framework is needed, you must initialize the +media_entity struct embedded in the v4l2_subdev struct (entity field) by +calling media_entity_init(): + + struct media_pad *pads = &my_sd->pads; + int err; + + err = media_entity_init(&sd->entity, npads, pads, 0); + +The pads array must have been previously initialized. There is no need to +manually set the struct media_entity type and name fields, but the revision +field must be initialized if needed. + +A reference to the entity will be automatically acquired/released when the +subdev device node (if any) is opened/closed. + +Don't forget to cleanup the media entity before the sub-device is destroyed: + + media_entity_cleanup(&sd->entity); + A device (bridge) driver needs to register the v4l2_subdev with the v4l2_device: @@ -263,6 +312,9 @@ This can fail if the subdev module disappeared before it could be registered. After this function was called successfully the subdev->dev field points to the v4l2_device. +If the v4l2_device parent device has a non-NULL mdev field, the sub-device +entity will be automatically registered with the media device. + You can unregister a sub-device using: v4l2_device_unregister_subdev(sd); @@ -291,7 +343,7 @@ ignored. If you want to check for errors use this: err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); Any error except -ENOIOCTLCMD will exit the loop with that error. If no -errors (except -ENOIOCTLCMD) occured, then 0 is returned. +errors (except -ENOIOCTLCMD) occurred, then 0 is returned. The second argument to both calls is a group ID. If 0, then all subdevs are called. If non-zero, then only those whose group ID match that value will @@ -319,6 +371,61 @@ controlled through GPIO pins. This distinction is only relevant when setting up the device, but once the subdev is registered it is completely transparent. +V4L2 sub-device userspace API +----------------------------- + +Beside exposing a kernel API through the v4l2_subdev_ops structure, V4L2 +sub-devices can also be controlled directly by userspace applications. + +Device nodes named v4l-subdevX can be created in /dev to access sub-devices +directly. If a sub-device supports direct userspace configuration it must set +the V4L2_SUBDEV_FL_HAS_DEVNODE flag before being registered. + +After registering sub-devices, the v4l2_device driver can create device nodes +for all registered sub-devices marked with V4L2_SUBDEV_FL_HAS_DEVNODE by calling +v4l2_device_register_subdev_nodes(). Those device nodes will be automatically +removed when sub-devices are unregistered. + +The device node handles a subset of the V4L2 API. + +VIDIOC_QUERYCTRL +VIDIOC_QUERYMENU +VIDIOC_G_CTRL +VIDIOC_S_CTRL +VIDIOC_G_EXT_CTRLS +VIDIOC_S_EXT_CTRLS +VIDIOC_TRY_EXT_CTRLS + + The controls ioctls are identical to the ones defined in V4L2. They + behave identically, with the only exception that they deal only with + controls implemented in the sub-device. Depending on the driver, those + controls can be also be accessed through one (or several) V4L2 device + nodes. + +VIDIOC_DQEVENT +VIDIOC_SUBSCRIBE_EVENT +VIDIOC_UNSUBSCRIBE_EVENT + + The events ioctls are identical to the ones defined in V4L2. They + behave identically, with the only exception that they deal only with + events generated by the sub-device. Depending on the driver, those + events can also be reported by one (or several) V4L2 device nodes. + + Sub-device drivers that want to use events need to set the + V4L2_SUBDEV_USES_EVENTS v4l2_subdev::flags and initialize + v4l2_subdev::nevents to events queue depth before registering the + sub-device. After registration events can be queued as usual on the + v4l2_subdev::devnode device node. + + To properly support events, the poll() file operation is also + implemented. + +Private ioctls + + All ioctls not in the above list are passed directly to the sub-device + driver through the core::ioctl operation. + + I2C sub-device drivers ---------------------- @@ -457,6 +564,10 @@ You should also set these fields: Otherwise you give it a pointer to a struct mutex_lock and before any of the v4l2_file_operations is called this lock will be taken by the core and released afterwards. +- prio: keeps track of the priorities. Used to implement VIDIOC_G/S_PRIORITY. + If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device. + If you want to have a separate priority state per (group of) device node(s), + then you can point it to your own struct v4l2_prio_state. - parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. @@ -466,13 +577,34 @@ You should also set these fields: (cx8802). Since the v4l2_device cannot be associated with a particular PCI device it is setup without a parent device. But when the struct video_device is setup you do know which parent PCI device to use. +- flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework + handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct + v4l2_fh. Eventually this flag will disappear once all drivers use the core + priority handling. But for now it has to be set explicitly. -If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or -.ioctl to video_ioctl2 in your v4l2_file_operations struct. +If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to video_ioctl2 +in your v4l2_file_operations struct. + +Do not use .ioctl! This is deprecated and will go away in the future. The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used. +If integration with the media framework is needed, you must initialize the +media_entity struct embedded in the video_device struct (entity field) by +calling media_entity_init(): + + struct media_pad *pad = &my_vdev->pad; + int err; + + err = media_entity_init(&vdev->entity, 1, pad, 0); + +The pads array must have been previously initialized. There is no need to +manually set the struct media_entity type and name fields. + +A reference to the entity will be automatically acquired/released when the +video device is opened/closed. + v4l2_file_operations and locking -------------------------------- @@ -502,6 +634,9 @@ for you. return err; } +If the v4l2_device parent device has a non-NULL mdev field, the video device +entity will be automatically registered with the media device. + Which device is registered depends on the type argument. The following types exist: @@ -577,6 +712,13 @@ release, of course) will return an error as well. When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there. +Don't forget to cleanup the media entity associated with the video device if +it has been initialized: + + media_entity_cleanup(&vdev->entity); + +This can be done from the release callback. + video_device helper functions ----------------------------- @@ -636,39 +778,25 @@ struct v4l2_fh -------------- struct v4l2_fh provides a way to easily keep file handle specific data -that is used by the V4L2 framework. Using v4l2_fh is optional for -drivers. +that is used by the V4L2 framework. New drivers must use struct v4l2_fh +since it is also used to implement priority handling (VIDIOC_G/S_PRIORITY) +if the video_device flag V4L2_FL_USE_FH_PRIO is also set. The users of v4l2_fh (in the V4L2 framework, not the driver) know whether a driver uses v4l2_fh as its file->private_data pointer by -testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. - -Useful functions: - -- v4l2_fh_init() - - Initialise the file handle. This *MUST* be performed in the driver's - v4l2_file_operations->open() handler. - -- v4l2_fh_add() +testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags. This bit is +set whenever v4l2_fh_init() is called. - Add a v4l2_fh to video_device file handle list. May be called after - initialising the file handle. - -- v4l2_fh_del() - - Unassociate the file handle from video_device(). The file handle - exit function may now be called. +struct v4l2_fh is allocated as a part of the driver's own file handle +structure and file->private_data is set to it in the driver's open +function by the driver. -- v4l2_fh_exit() +In many cases the struct v4l2_fh will be embedded in a larger structure. +In that case you should call v4l2_fh_init+v4l2_fh_add in open() and +v4l2_fh_del+v4l2_fh_exit in release(). - Uninitialise the file handle. After uninitialisation the v4l2_fh - memory can be freed. - -struct v4l2_fh is allocated as a part of the driver's own file handle -structure and is set to file->private_data in the driver's open -function by the driver. Drivers can extract their own file handle -structure by using the container_of macro. Example: +Drivers can extract their own file handle structure by using the container_of +macro. Example: struct my_fh { int blah; @@ -685,15 +813,21 @@ int my_open(struct file *file) ... + my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL); + + ... + ret = v4l2_fh_init(&my_fh->fh, vfd); - if (ret) + if (ret) { + kfree(my_fh); return ret; + } - v4l2_fh_add(&my_fh->fh); + ... file->private_data = &my_fh->fh; - - ... + v4l2_fh_add(&my_fh->fh); + return 0; } int my_release(struct file *file) @@ -702,8 +836,65 @@ int my_release(struct file *file) struct my_fh *my_fh = container_of(fh, struct my_fh, fh); ... + v4l2_fh_del(&my_fh->fh); + v4l2_fh_exit(&my_fh->fh); + kfree(my_fh); + return 0; } +Below is a short description of the v4l2_fh functions used: + +int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) + + Initialise the file handle. This *MUST* be performed in the driver's + v4l2_file_operations->open() handler. + +void v4l2_fh_add(struct v4l2_fh *fh) + + Add a v4l2_fh to video_device file handle list. Must be called once the + file handle is completely initialized. + +void v4l2_fh_del(struct v4l2_fh *fh) + + Unassociate the file handle from video_device(). The file handle + exit function may now be called. + +void v4l2_fh_exit(struct v4l2_fh *fh) + + Uninitialise the file handle. After uninitialisation the v4l2_fh + memory can be freed. + + +If struct v4l2_fh is not embedded, then you can use these helper functions: + +int v4l2_fh_open(struct file *filp) + + This allocates a struct v4l2_fh, initializes it and adds it to the struct + video_device associated with the file struct. + +int v4l2_fh_release(struct file *filp) + + This deletes it from the struct video_device associated with the file + struct, uninitialised the v4l2_fh and frees it. + +These two functions can be plugged into the v4l2_file_operation's open() and +release() ops. + + +Several drivers need to do something when the first file handle is opened and +when the last file handle closes. Two helper functions were added to check +whether the v4l2_fh struct is the only open filehandle of the associated +device node: + +int v4l2_fh_is_singular(struct v4l2_fh *fh) + + Returns 1 if the file handle is the only open file handle, else 0. + +int v4l2_fh_is_singular_file(struct file *filp) + + Same, but it calls v4l2_fh_is_singular with filp->private_data. + + V4L2 events ----------- |